Lab 2B Laboratory Ozone Generator Datasheet

The LAB2B is a corona discharge type ozone generator with variable ozone output. Producing up to 4g O3/h using air and 10g O3/h using oxygen. The LAB2B is designed specifically for laboratory research.APPLICATIONS• Research and Development• EducationMAIN CHARACTERISTICS• Ozone generator especially designed for laboratory use • Up to 10g O3/h• Compact dimensions• Feed Gas: Air or OxygenOZONE TECHNOLOGY:LAB2B OZONE SYSTEMSThe LAB2B ozone generator is a small air-cooled unit specifically designed for bench use incorporating function indicators, feed gas flowmeter and variable output control.Output variation is manually adjustable using a control knob mounted on the front panel. Operating on various feed gases such as dried air or oxygen the LAB2B is capable of producing concentrations up to 10% volume.HOW IT WORKSOzone is produced when dry air or oxygen gas is passed over the ceramic dielectric of an ozone generating module. The module is powered by a high voltage/high frequency power board. The electronic power board is designed for either intermittent or continuous operation. The ceramic dielectric is housed within a finned heat sink block which is air cooled by fan assisted atmospheric air.OZONELAB2BOZONELAB2BOzone generatorPRODUCT HIGHLIGHTS > Variable ozone output up to 10g O3/h> Operate under vacuum or at maximum pressure of 10psig> Illuminating switches indicating ozone production and faults> Air cooled> O&M manual included performance graphs> Full twelve months warranty > Technical backup facilities© 2011 Degrémont Technologies Ltd. • Subject to change without notice. • www.triogen.com TECHNICAL DATAOzone Output(1)Ozone Output(2)Feed Gas Flow RateVariable Output ControlPower SupplyPowerConsumptiong/h lb/h g/h lb/h l/min airl/min oxygen % V/ph/Hz WLAB2B 4.0 0.14 10.0 0.35 4-10 2-5 15-100230/1/50 or 115/1/60105MATERIALS• Enclosure: mild steel, epoxy coated• Module: 316 stainless steel electrode assembly inside a ce-ramic dielectric tube supported by P.T.F.E end capsOPTIONS• Additional LAB2B units for larger ozone outputREMOTE CONTROL AND ALARMS• Ozone On-Off: green illuminator switch • Fault Red: illuminator switch• Flowmeter: 2–10 l/min(1) Feed Gas: Dry Air-60°C Dewpoint(2) Feed Gas: 100% OxygenMODEL LxHxW(mm)Weight(kg)LAB2B 350 x 160 x 300 6• Operating method: Vacuum or Pressure (10psi max.)• Module Cooling Medium: Ambient Air (fan assisted)• Connections: PVDF compression Fitting to suit 8 mm (0.31 inch) OD PIPESIDE VIEWREAR VIEWFRONT VIEWLengthWidthFLOWMETERON-OFFFAULTVARIABLEHeightYour local distributor:CONTACTTRIOGEN LtdUnit 14 Langlands PlaceEast Kilbride G75 0YFScotland, United KingdomTel: + 44 (0) 13 55 220 598Fax: + 44 (0) 13 55 570 058www.triogen.cominfo@triogen.comOZONE