Land Managements - Brochure

Worksaver®Land Management EquipmentPowerful attachments to fit your application.Designed.Engineered.RemarkableValue.Designed for use by contractors, municipalities, institutionsand farmers. Hydraulically driven models for skid steers, PTOdriven models for 3-pt. tractor mounts (Cat.I). 32 inch diame-ter convoluted brushes available in Poly (P) or both Poly andWire (PW). All models available in 5-ft., 6-ft., & 7-ft. widths.• Remove dirt, sand, gravel and trash from construction entrances, parking lots, bridges, driveways & sidewalks.• Remove thatch and prepare turf for the growing season.• Clean snow or leaves from streets, driveways, and building entrances.• Excellent for general clean up before sealing or repairing pavement.• Brooms angle up to 30-degrees right or left. Optional manual or hydraulic angle adjustment kits available.• Height adjustment chains maintain an even operating position.• Parking stand included as standard equipment.• Double gearbox drive for smooth power transmission and easy reversal of brush rotation.• Optional electric solenoid kit also offered.Skid Steer Rotary Broom• Hydraulically driven skid steer models in 5-ft., 6-ft., & 7-ft. widths with 32” diameter brushes.• Variable flow control valve for optimum broom speed.• Step-through mount design for easy in /out of skid steer cab.• 4.36 / 1 chain drive ratio for excellent torque. 3-pt. Rotary Broom• PTO driven 3-pt. tractor mount in 5-ft., 6-ft., & 7-ft. widths with 32” diameter brushes.• Top “T-Shaft” gearbox allows easy reversal of brush rotation.• Designed for Category I tractors with 1,000 lbs. or greater3-pt. lift capacity.Rotary BroomsThe widest choice of qualityland management attachments.Worksaver2Skid Steer Rotary Broom SpecificationsChoose WorksaverFor All Your Land ManagementSSMB-325P SSMB-325PW SSMB-326P SSMB-326PW SSMB-327P SSMB-327PWOverall Width (in/cm) 69 / 175 69 / 175 81 / 206 81 / 206 93 / 236 93 / 236Brush Diameter (in/cm) 32 / 81 32 / 81 32 / 81 32 / 81 32 / 81 32 / 81 Sweeping Width (in/cm) 60 / 152 60 / 152 72 / 183 72 / 183 84 / 213 84 / 213 Width @ 30° Angle (in/cm) 53 / 135 53 / 135 64 / 163 64 / 163 76 / 193 76 / 193 Mounting System Skid Steer Skid Steer Skid Steer Skid Steer Skid Steer Skid Steer Brush Material Poly Poly / Wire Poly Poly / Wire Poly Poly / Wire Hydraulic Motor Rating 16 GPM 16 GPM 16 GPM 16 GPM 16 GPM 16 GPMDirt Deflector Optional Optional Optional Optional Optional Optional Sprinkler System Optional Optional Optional Optional Optional Optional Weight (lbs/kg) 640 / 290 637 / 289 740 / 336 736 / 334 840 / 381 833 / 378 Product No. 610961 610960 610966 610965 610971 6109703WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.3-pt. Rotary Broom SpecificationsRMB-325P RMB-325PW RMB-326P RMB-326PW RMB-327P RMB-327PWOverall Width (in/cm) 69 / 175 69 / 175 81 / 206 81 / 206 93 / 236 93 / 236Brush Diameter (in/cm) 32 / 81 32 / 81 32 / 81 32 / 81 32 / 81 32 / 81 Sweeping Width (in/cm) 60 / 152 60 / 152 72 / 183 72 / 183 84 / 213 84 / 213 Width @ 30° Angle (in/cm) 53 / 135 53 / 135 64 / 163 64 / 163 76 / 193 76 / 193 Mounting System 3-pt. (Cat. I) 3-pt. (Cat. I) 3-pt. (Cat. I) 3-pt. (Cat. I) 3-pt. (Cat. I) 3-pt. (Cat. I) Brush Material Poly Poly / Wire Poly Poly / Wire Poly Poly / Wire PTO RPM Range 540 540 540 540 540 540Dirt Deflector Optional Optional Optional Optional Optional Optional Sprinkler System Optional Optional Optional Optional Optional Optional Weight (lbs/kg) 720 / 326 714 / 324 780 / 354 774 / 351 840 / 381 833 / 378 Product No. 610705 610700 610755 610750 610805 610800WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.OptionsAngle Adjustments Kits (all models require either a manual or hydraulic kit)Product No. 610702 Manual Angle Adjustment Kit for either skid steers or 3-pt. tractor.Product No. 610703 3-pt. Hydraulic Angle Adjustment Kit – includes cylinder & hoses less tips.Skid Steer Hydraulic Angle Adjustment Kit – includes electric hydraulic solenoid control Product No. 610704 valve. For skid steer brooms used on units with only one set of remotes. Includes cylinder, hoses, valve, & flat-faced couplers. Factory installed.Electric Solenoid Kit (Optional)Product No. 610950Field installed electric hydraulic solenoid valve kit – fits product no. #610703 hydraulic angle kit above.Worksaver4Economical and efficient PTO powered stumpgrinders make stump removal fast and easy.Operator easily controls the grinder from the comfort of the tractor seat. SurefootTM stabilizer provides solid footing during operation.• Tractor models require two pair of remote hydraulic outlets.• Cutting wheel design provides a smoother cutting action and higher productivity.• Durable carbide-tipped cutting teeth are economical and easy to replace.• Maneuverable – goes anywhere a tractor can; gets into tight places.• Easy to operate – hydraulic controls allow easy operation from the seat of the power unit using existing hydraulic controls.• Heavy duty bushings w/grease zerks are used at major pivot points for increased reliability and extended service life.• Standard pressure relief valve for precise control of cutting feed rate.• Pressure relief valve helps reduce hydraulic oil heat buildup keeping tractor hydraulics cooler.• Rubber deflector helps control chips and debris during grinding.• Parking stand for easy storage.SmoothCutTMStump GrindersSurefootTM stabilizer5Choose WorksaverFor All Your Land ManagementStump Grinder SpecificationsWARNING: Read and understand the operator’s manual before operation. Stump grinder will put a heavy load on the rear ofyour tractor. Be sure your tractor is properly counterbalanced. Damage to equipment or personal injury could occur. Neverallow children or bystanders around tractor or stump grinder while operating.SG-26A SG-36AHitch Cat. I Cat. I / IIOverall Estimated Length (in/cm) 75 / 191 80 / 230 Drive System Protection Slip Clutch Slip Clutch Gearbox Rating / Ratio 60 HP / 1:1.5 100 HP / 1:1.46Cutting Wheel Construction Welded 2-piece Laminated Steel Cutting Wheel Thickness (in/cm) 3/4 / 1.91 Cutting Wheel Diameter (in/cm) 26 / 66 36 / 91Cutting Wheel Speed 810 RPM 788 RPM @ 540 PTO RPM 5,515 ft. / min. 7,430 ft. / min.Number of Teeth 33 42Cutting Teeth Construction Carbide Steel Bolt-inCut Height Above Ground (in/cm) 18 / 46Cut Depth Below Ground (in/cm) 10 / 25 15 / 38Maximum Horizontal Cut (in/cm) 28 / 71 33 / 84Swing Arc 45°Minimum Power / Flow Required 22-PTO HP 45-PTO HPMaximum Power / Flow 50-PTO HP 100-PTO HPDrive System PTO / Series 5 PTO / Series 6PTO Speed 540 RPM 540 RPMWeight (lbs/kg) 660 / 299 880 / 399Product No. 812200 812210 Designed for skid steer or tractor front loaders. Solves theproblem of trimming hard to reach tree branches andunwanted trees. Ideal for high reach trimming or groundlevel cutting.• Mounts to either side of the main frame for excellent visibility.• Eliminates the unsafe practice of trimming limbs with a chain saw from a loader bucket or ladder.• Timesaving way to trim and clear trees and brush, that is faster and easier than using a chainsaw.• When cutting at ground level, unit leaves minimal ground disturbance. • Heavy-duty 5” x 8” hydraulic cylinder with 2” rod and 1-1/4” pins for positive cutting action. • Hardened pivot bushings for long service life.• Self-centering ¾” T-1 steel blades provides outstanding performance.• Unit features power tilt to rotate head assembly for best cutting angle.• Extended reach allows trimming of limbs 12-16 ft. high (depending on tractor /loader used). When cutting trees at ground level, allows easy access under extending branches.• Design allows unit to cut overheador horizontally at ground level.• Cuts limbs and trees up to 8” in diameter.• Minimum hydraulic pressure required –2000 psi.• Optional electric solenoid valve and hose kit to fit most skid steer loaders and tractors when only one set of remotes is available.Worksaver6Tree ClipperChoose WorksaverFor All Your Land Management7Tree Clipper SpecificationsTC8-FL TC8-SSFrame Construction Welded Steel Welded Steel Clipper Blade Material T-1 Steel T-1 SteelClipper Capacity (in/cm) 8 / 20 Diameter 8 / 20 DiameterMain Pivot Tube (in/cm) 2-7/8 / 8 O.D. - 3/8 / .95 Wall 2-7/8 / 8 O.D. - 3/8 / .95 WallLength of Reach from main frame (in/cm) 72 / 183 72 / 183Head Rotator Cylinder Size 2-1/2” x 10” 2-1/2” x 10”Cutting Head Cylinder Size 5” x 8” 5” x 8”Degree of Cutting Head Rotation 113° 113°Mounting for Tractor Loaders Mgt. Brackets Required* Fits Loaders w/SS Quick AttachMounting for Skid Steers N/A Universal Skid SteerMinimum Hydraulic Pressure 2,000 psi 2,000 psiTractor Size Requirements (min. PTO hp) 45 PTO HP** 45 PTO HP**Weight (lbs/kg) 710 / 322 723 / 328Product No. 811300 811305*Bracket for most front loader quick attach systems are available. “Be sure rear of tractor is property counterbalanced.”Base tractor unit does not include hydraulic hoses to the remotes.WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.Worksaver8Designed for skid steers and tractor front loaders, heavyduty snow blades remove snow easily from driveways, parking lots or other large areas. Available in 5, 6, 7½ and 9 foot widths. 7½' and 9' blades feature 5 degree lateral oscillation allowing these wider blades to easily follow the ground contour. SBS models utilize the"Universal" skid steer mounting system. SBFL models offer interfacing brackets for most tractor front loaders. SBC models easily install on compact tractors by clampingonto the bucket for fast snow removal. • Ideal for residential or commercial snow removal. • Two trip springs for controlled break over in snow.• Blade floats to clean uneven surfaces.• Reinforced 21” or 27” high 10-gauge moldboards provide long service life.• 3/8” x 6” cutting edge of 1044 steel.• Two clamp-on models for compact tractors.• Step-through design allows for easy access to skid steer seat.• Quick hook up on skid steers or front loaders equipped with “Universal” mounting plate.• Blade angles right or left.• Adjustable skid shoes are ½” thick and rotate for long life.Snow BladesAdjustable skidshoes are standardChoose WorksaverFor All Your Land Management9WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.Snow Blades Specifications – For skid steers and tractors with a recommended HP of 30-95 HP.SBFL-27108A SBS-27108A SBG-27108A SBJD-27108A SBFL-2709A SBS-2790A SBG-2790A SBJD-2709AOverall Width 108 / 274 108 / 274 108 / 274 108 / 274 90 / 229 90 / 229 90 / 229 90 / 229(in/cm)Overall Height 27 / 69 27 / 69 27 / 69 27 / 69 27 / 69 27 / 69 27 / 69 27 / 69(in/cm)Moldboard 10-gauge 10-gauge 10-gauge 10-gauge 10-gauge 10-gauge 10-gauge 10-gaugeThicknessCutting Edge (in/mm)3/8 x 6 / 9.525Standard Standard Standard Standard Standard Standard Standard Standardx 152.4 5° Lateral Standard Standard Standard Standard Standard Standard Standard StandardOscillation Extension 2 2 2 2 2 2 2 2Trip Springs Manual N/A N/A N/A N/A 5 5 5 5Angle PositionsWidth 96 / 244 96 / 244 96 / 244 96 / 244 80 / 203 80 / 203 80 / 203 80 / 203@ Full AngleTractor Loader *Brackets N/A Euro/Global 400 / 500 JD*BracketsN/A Euro/Global 400 / 500 JDMount Req. Req.Skid Steer N/A Universal N/A N/A N/A Universal N/A N/AMountAdjustable Standard Standard Standard Standard Standard Standard Standard StandardSkid ShoesHorse Power 40-95 HP 40-95 HP 40-95 HP 40-95 HP 30-80 HP 30-80 HP 30-80 HP 30-80 HPRatingWeight 665 / 302 690 / 313 640 / 290 670 / 304 555 / 252 530 / 240 510 / 231 510 / 231(lbs/kg) Hydraulic Standard Standard Standard Standard Optional Optional Optional OptionalAngle KitCrossover Standard Standard Standard Standard Optional Optional Optional OptionalRef. ValveOptional Top 360230 360230 360230 360230 360277 360277 360277 360277DeflectorOptional Sight 360235 360235 360235 360235 360235 360235 360235 360235IndicatorProduct No. 360075 360070 360078 360275 360040 360000 360090 360270*Optional interfacing quick attach brackets available for most popular models.Worksaver10WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.Snow Blades Specifications – Models 2160 & 2172 are for skid steers and tractors with a recommendedHP of 25-45 HP. SBC clamp-on models are for tractors with a recommended HP up to 35 HP.SBFL-2172 SBS-2172 SBC-2172 SBJD-2172 SBFL-2160 SBS-2160 SBC-2160 SBJD-2160Overall Width 72 / 183 72 / 183 72 / 183 72 / 183 60 / 152 60 / 152 60 / 152 60 / 152(in/cm)Overall Height 21 / 53 21 / 53 21 / 53 21 / 53 21 / 53 21 / 53 21 / 53 21 / 53(in/cm)Moldboard 10-gauge 10-gauge 10-gauge 10-gauge 10-gauge 10-gauge 10-gauge 10-gaugeThicknessCutting Edge (in/mm)3/8 x 6 / 9.525Standard Standard Standard Standard Standard Standard Standard Standardx 152.4 Extension 2 2 2 2 2 2 2 2Trip Springs Manual 5 5 5 5 5 5 5 5Angle PositionsWidth 62 / 157 62 / 157 62 / 157 62 / 157 52 / 132 52 / 132 52 / 132 52 / 132@ Full AngleTractor Loader *Brackets N/A Clamp-On 200 / 400 JD*BracketsN/A Clamp-On 200 / 400 JDMount Req. Req.Skid Steer N/A Universal N/A N/A N/A Universal N/A N/AMountAdjustable Standard Standard Standard Standard Standard Standard Standard StandardSkid ShoesHorse Power <45 HP <45 HP <35 HP <45 HP <45 HP <45 HP <35 HP <45 HPRatingWeight 366 / 166 350 / 159 335 / 152 395 / 179 347 / 157 334 / 152 305 / 138 375 / 170(lbs/kg) Hydraulic Optional Optional N/A Optional Optional Optional N/A OptionalAngle KitCrossover Optional Optional Optional Optional Optional Optional Optional OptionalRef. ValveOptional Top 360223 360223 360223 360223 360220 360220 360220 360223DeflectorOptional Sight 360235 360235 360235 360235 360235 360235 360235 360235IndicatorProduct No. 360160 360130 360290 360225 360140 360100 360280 360250*Optional interfacing quick attach brackets available for most popular models.Choose WorksaverFor All Your Land Management11Worksaver’s Skid Steer Mixer, model SS-590 has directhydraulic drive of the gearbox which eliminates chain and sprocket maintenance resulting in more up-time on the jobsite. Large 11-cubic ft. drum allows the operator to mix,transport and place 5-cubic ft. of concrete. It's efficientdesign offers the contractor a cost savings over chain driven models.• All welded steel drum construction with internal paddles for uniform mixing and clean dumping.• Compact, trouble free, long life design with few moving parts.• Direct hydraulic drive of the gearbox eliminates chain & sprocket maintenance.• Flow control valve allows easy control of mixer speed.• All welded frame “universal” skid steer with step-through design for easy access to the operators’ seat.Model 580 3-pt. mixer is ideal for mixing feed, fertilizer,inoculating seed, potting soil and other mixing jobs.Hydraulic top link cylinder provides positive dump control.Number 40-roller chain drives mixing drum. AdjustableCat.I hitch allows easy hook up to most tractors (7/8" dia.lift pins). Sealed ball bearings provide long service lifewith reduced maintenance.Hydraulic/PTO Cement MixersCement Mixer Specifications580 SS-590Capacity Five (5) cu/ft (1 Bag Mix) Five (5) cu/ft (1 Bag Mix)Drum Opening (in/cm) 17.5 / 44 20 / 51Overall Drum Length (in/cm) 32 / 81 32 / 81Drum Construction 2-Piece Bolted Welded SteelDrive System Tractor PTO Hydraulic Direct Thru Gearbox Hydraulic Requirements N/A Minimum 8 GPM Hitch Requirements Cat. I (7/8” dia. lift pins) N/A Drive Ratio 8.77:1 3.18:1Flow Control Valve N/A StandardConnect Under Pressure Couplers N/A StandardParking Stands Standard StandardShipping Weight (lbs/kg) 253 / 115 395 / 180Product No. 780620 780950WARNING: Read and understand the operator’s manual before operation. Be sure tractor/skid steeris properly counterbalanced. Damage to equipment or personal injury could occur.Caution — A heavy load can cause your tractor to tip over. When moving heavy loads, keep the load as close to the ground as possible, go slowly around turns, and be sure the front or rear of tractor is properlycounterbalanced with weights.Caution — Operators must read & understand operator’s manual, particularly the safety warnings and instructions.The operator is responsible for safety of themselves and others when operating equipment.WORKSAVER, INC. has a corporate policy of continuous product improvement and development; therefore, specifications are subject to change without any advance notice. WORKSAVER, INC. is not responsible for differences between specifications or illustrations contained in this publication and the actual equipment.Worksaver, Inc.Worksaver, Inc.P.O. Box 100, Litchfield, IL 62056-0100 Phone: 217-324-5973 • Fax: 217-324-3356E-mail: sales@worksaver.comWeb: www.worksaver.comForm No. 82-4424 © 2012 Worksaver, Inc. Printed in U.S.A.Distributed by:Designed.Engineered.RemarkableValue.Built for years of dependable use, Worksaver Box Scrapersallow you to shape, level and grade smooth your land management projects. Designed for maximum versatility,scarifiers offer 3-depth adjustments to meet a variety ofground conditions. Double beveled reversible cuttingedges provide years of service. Robotically welded frames. • Formed moldboard for superior strength.• 3-position scarifiers.• Reversible cutting edges.• Ideal for leveling, finishing grading and backfilling at building sites, feedlots and outdoor arenas.Box ScrapersBox Scraper SpecificationsSBX-4 SBX-5 SBX-6 SBX-7 SBX-8Working Width (in/cm) 48 / 122 60 / 152 72 / 183 84 / 213 96 / 244 Overall Depth (in/cm) 21-1/2 / 55 21-1/2 / 55 21-1/2 / 55 21-1/2 / 55 21-1/2 / 55End Plate Thickness (in/cm) 1/4 / .635 1/4 / .635 1/4 / .635 1/4 / .635 1/4 / .635Moldboard Thickness 7 ga. 7 ga. 7 ga. 7 ga. 7 ga.No. of Scarifiers 3 4 5 6 7Cutting Edge Reversible Reversible Reversible Reversible ReversibleHitch Category Cat. I Cat. I Cat. I Cat. I Cat. ITractor Horsepower 18 - 25 20 - 25 25 - 40 30 - 40 34 - 45Weight (lbs/kg) 320 / 145 378 / 172 428 / 194 469 / 213 516 / 234Product No. 341320 341325 341335 341340 341345