Lavasol 2 (High Ph) Liquid Membrane Cleaner Brochure

LIQUID MEMBRANE CLEANER 2Lavasol™ 2 is a high pH liquid formulation that combines solubilizing and dispersing agents, designed specifically to remove bacterial by-products, hydrocarbons, silt, and similar particulate foulants. Used in a program that includes an acidic cleaner for inorganic scale and metal hydroxides, this highly efficient product provides excellent foulant removal resulting in longer system run times and increased membrane life expectancy.Benefits• Concentrated cleaner for most efficient shipping and handling• Phosphate-free formula to reduce negative impact on the environment• Buffered pH to maintain optimum cleaning performance throughout cleaning cycle• Optimal results when used in conjunction with either Lavasol™ 1 or OptiClean™ AUses• For use on reverse osmosis (RO), nanofiltration (NF), ultrafiltration (UF) and micro-filtration (MF) membranes• Formulated to dissolve organic foulants from the membrane surface• Effective in removing biological slime and bacterial byproduct• Includes an organic chelant to remove oxides of iron and aluminum• Extremely effective in removing oils and other organic compoundsPackagingPail: 5 gallon/18.9 literDrum: 55 gallon/208 literTote: 275 gallon/1,040 literSpecificationsAppearance Clear liquidpH (2% solution) 10.5 – 11.0Density (kg/liter) 1.08 – 1.10For special packaging options, please contact PWT or your local distributor.Company OverviewFounded in 1996, Professional Water Technologies™ develops industry leading products and services for maintaining and operating industrial, commercial, and municipal reverse osmosis and MF/UF systems. With efficiency and high performance behind everything we do, Professional Water Technologies™solutions surpass our client’s expectations by maximizing the operating efficiency, economy, and longevity of their systems. Solutions include super-concentrated phosphate-free antiscalants, membrane cleaners, membrane forensics services, and more.General Mixing & Application Instructions for Lavasol™ 2LIQUID MEMBRANE CLEANER 21. Inspect all cleaning system components to include CIP tank, hoses, and cartridge filters. Flush or replace if necessary. Fill cleaning tank with RO permeate or DI water. Turn on agitator or tank recirculation pump.2. Slowly add Lavasol™ to cleaning tank (1 gal [3.8 L] of Lavasol™ for every 50 gal [189 L] of water). Mix thoroughly. The solution pH should match product specification. If necessary, adjust pH with a membrane–approved chemical such as caustic, citric, sulfuric or hydrochloric acid. The solution should be heated up to 45°C to improve cleaning efficacy.3. Circulate solution in the same direction as the feed flow. Typical circulation times are 30–90 minutes.* PWT recommends cleaning each stage of the system separately. Maximum flow rate per pressure vessel is 40 gpm (152 Lpm) for 8-inch elements and 10 gpm (38 Lpm) for 4-inch elements. Maximum pressure for cleaning is 60 psig (4.2 kg/cm2). 4. In cases of heavy fouling, divert the first 10-20% of cleaning solution to drain to prevent re–deposition of removed solids. 5. Rinse with RO permeate before returning system to service. When returning unit to service, divert product water to drain until any residual cleaning solution has been rinsed from system.*Depending on the nature of the fouling, a soak period may be necessary for optimum results. Please contact PWT or your local distributor for custom cleaning procedure, or consult PWT’s Technical Bulletin 503 for further cleaning recommendations.