LCI-250 Brochure

Drive Train> Cat or Detroit (230 to 325 HP) Allison five speed transmission> Engine and transmission mounted in rubber on carrier for easy above-deck access> Engine cover for weather protectionCarrier> Four axle carrier available with long wheelbase (338") for even weight distribution or with short wheelbase (297") for a shorter turning radius> Front axles (rated at 22,000 lbs. each) have spring suspension.> Rear tandem axles (rated at 50,000 lbs. total) have walking beam suspensionCarrier Options> Two powered front steering axles are optional for use in rough or muddy terrain> Trailer models are available with either a single drop (gooseneck) or straight (rough terrain) design> Tool boxes, extra fuel tanks, spare tires, operator platforms can be supplied as neededControls and Hydraulic System> The console panel for all leveling jacks, mast raising and extending cyl., engine, transmission and main drum located at one position for simple, quick rig-up. Operator's console can be provided movable to 10'-6", 12', or 14' as required.> 50 gpm hydraulic pump for all rig hydraulics and tong operation> Filters provided on pressure and return linesOptions> Hydraulic oil cooler for continuous use and hot climate applications> Single or dual 8,000 lbs. hyd. catline winch for safe, efficient lifting around the well site> Hydraulic catworks for precise control of make-up and break-out torques> Cold weather packages for -40° operation> Folding platforms off operator side of rig> Spare line spool on rig> Mast lite package> Install drawworks on conventional truckDrawworks Model 250/38-10, 38-8Main Drum> Demountable, forged steel brake rims are 38" diameter x 10" wide (drum shaft diameter is 5 3/4")> Single line pull is 37,500 lbs.> 1" wire line size standardSandline Drum> Demountable, forged steel brake rims are 38" diameter x 8" wide> Wireline capacity per AOSC approved formula:12,760' of 9/16"10,530' of 5/8"Drawworks Options> Drawworks Model 250/38-10, 38-8> Water splash brake cooling> LEBUS grooving on drum - 1" diameter> Rotary drive attachment> Crown block saver> Disc brake in lieu of Parmac Auxiliary brakeMast Model 96/180 (Double Tubing, Triple Rods per API 4F)> Four leg fixed base design allows fast positioning of rig before mast is raised. Clear height is 96' below crown.> Static hook load capacity:on 4 lines 180,000 lbs.on 6 lines 225,000 lbs.> Crossover crown with 24" fast line sheave plus three 24" sheaves> All sheaves mounted on Timken double row bearings> Racking platform capacity 18,360' of 2 7/8" EUE tubing> Hydraulic rams for raising and telescopingMast Options> Speed kit crown, mast lights, rod hangers, work platform, standpipes, 24" sandline sheave> Optional Mast Model:96/225 twin box mast71/150 twin box mastSteveLaraStampLOADCRAFT INDUSTRIES, LTD. Forward: