LCI-550 Brochure

Drive Train> Cat C15 or Ser 60 Detroit (475 to 540 HP)> Allison CLT 6061 six speed automatic transmission> Optional 5610 Allison or equal (engine and transmission mounted in rubber on carrier for easy above-deck access)> Engine cover for weather protectionCarrier – Five Axle> Front axles (rated at 22,000 lbs. each) have spring suspension> Rear tandem axles (rated at 50,000 lbs. total) have walking beam suspension> Third (non-driving) rear axle with air bag lift suspension is rated at 25,000 lbs. capacityCarrier Options> Two powered front steering axles are optional for use in rough or muddy terrain> Three rear drive axles for off road> Trailer models are available with either a single drop (gooseneck) or straight (rough terrain) design> Tool boxes, extra fuel tanks, spare tires, operator platforms can be supplied as neededControls and Hydraulic System> The console panel for all leveling jacks, mast raising and extending cyl., engine, transmission and main drum located at one position for simple, quick rig-up. Operator's console can be provided movable to 10'-6", 12', or 15' as required.> 50 gpm hydraulic pump for all rig hydraulics and tong operation> Filters provided on pressure and return linesOptions> 70 gpm hydraulic pump> Hydraulic oil cooler for continuous use and hot climate applications> Single or dual 8,000 lbs. hyd. catline winch located at rear of rig> Hydraulic catworks for precise control of make-up and break-out torques> Cold weather packages for -40° operation> Folding platforms off operator side of rig> Spare line spool> Mast lite package> Rig ramps and crossbase supports> Rig substructure assemblyDrawworks Model 550/42-12, 42-8Main Drum> Demountable, forged steel brake rims are 42" diameter x 12" wide> Drum shaft diameter is 6 1/2"> Single line pull is 42,500 lbs.> Parmac Model 202 Auxiliary brake standardSandline Drum> Demountable, forged steel brake rims are 42" diameter x 8" wide> Wireline capacity per AOSC approved formula:14,400' of 9/16"11,800' of 5/8"> Outboard clutch for easy accessDrawworks Options> Water splash brake cooling> LEBUS grooving for main drum - 1" diameter> Rotary drive attachment @ rear of rig> Crown block saver> Disc brake in lieu of Parmac Auxiliary brakeMast Model 104/250 (Double Tubing, Triple Rods per API 4F)> Four leg fixed base design allows fast positioning of rig before mast is raised. Clear height is 104' below crown.> Static hook load capacity:on 6 lines 225,000 lbs.on 8 lines 250,000 lbs. > Crossover crown with 36" fast line sheave plus 24" sheaves for cluster; 30" deadline. Sandline 9/16 x 24" sheave.> All sheaves mounted on Timken double row bearings> Racking platform capacity 22,200' of 2 7/8" EUE tubing> 1" wire line standardMast Options> Mast lights, rod hangers, work platform, standpipes, 24" sandline sheave> Optional Mast Model:96/250 tubing mast110/250 tubing mast104/250 twin box mast110/250 twin box mastSteveLaraStampLOADCRAFT INDUSTRIES, LTD. Forward: