Liquid Sanitizer Concentrate SANI-SYSTEM Brochure

Liquid Sanitizer Concentrate• Faster, easier and safer than other alternative sanitizers • Easy and reliable single dose packets• 99.99% effective kill rate againstharmful bacteria• Only sanitizer on the market provenby the WQA to safely sanitize an ROunit membrane• Sani-System is a clear liquid and willreact to oxidizers• Routine storage. Rubber gloves are suggested when handling thisproduct. Read relevant MSDS before handling product.• Do not mix with other chemicals.• Certified to NSF/ANSI 60 StandardsRO Unit Sanitizer:SS24RO 0.25 fl. oz. 24 PacketsSS96RO 0.25 fl. oz. 96 PacketsWater Softener Sanitizer:SS24WS 0.5 fl. oz. 24 PacketsSS96WS 0.5 fl. oz. 96 PacketsTechnical Information Part # Size Quantity Pro Products | Ft. Wayne, Indiana 46804 | www.proproducts.com | 1-800-285-9176SANI-SYSTEMSanitizer | DisinfectantSani-System is the only EPA & NSF approved sanitizer for use in water softeners and reverse osmosis units. It’s proven to kill 99.99% of harmful bacteria without the use of chlorine, oxidizers or acids that can harm system equipment parts andresin. The exact pre-measured doses are perfect for both water softeners and ROunits. One Sani-System packet contains a concentrated formula that sanitizes equipment in just 60 seconds.Application:Water Softeners1. Pour entire packet into the brine well. If no brine well is present, pour entire packet into bottomof brine tank when salt is nearly empty.2. Manually regenerate the softener according to the manufacturer’s specifications. Regenerate asecond time if necessary. Reverse Osmosis (RO) Units1. Shut off water supply to RO unit and remove membrane and all filters. Use rubber gloves and store filters and membranes in water to prevent damage.2. Open pure water faucet and depressurize system.3. Pour entire packet directly into first main housing unit. Make sure pure water faucet is closed andturn on water supply.4. Allow system to fill with water. Time will vary depending on water pressure. However, systemshould be full within 5 – 10 minutes without filters or membrane. Flush system two times.5. Replace or re-install membranes and all filters.*Leave membrane in unit for complete disinfection. Note: Sanitization time will increase significantly.The industry’s only EPA & NSF approved sanitizerdelivers reliable, effective results every time.User Benefits