LS-300 Pump Level Switch - Brochure

NONNON--CONTACT CONTACT PUMP SWITCHPUMP SWITCHPUMP SWITCHPUMP SWITCHWITCHWITCHMP SWMP SW Ultra-Sonic Level Sensor300 PU300 PUHow it WorksRTM’s Pump Switch is a non contactProduct OverviewThe Monitor40 kHz to 300 kHz Ultrasonic Air LSLS--33 RTM s Pump Switch is a non-contact level sensor that controls wastewater pumps. You simply plug your pump into the LS-300 and the sensor turns your wastewater pump on when the liquid level rises to Level 1 and offwhen the wastewater lowers to Level 2. The switch shown above turns the pump on with 3” of liquid and off with Transducer3” to 60’ Nominal Depth110V/1pH/60HzWatertight EnclosureReliable Wastewater Design RTM’s LS-300 Pump Switch is much more reliable than a float switchp p q1” of liquid in the tank or reservoir. It also has a built-in timer that allows your pump to stay on for an additional 10 seconds after the low level is met to completely drain the tank. more reliable than a float switch because it never touches the wastewater. The sensor will not get fouled by oil, grease or other debris and with the pump cycle feature, your pump evacuates any floating solids from the tank by pumping the level all th dRemote Tank Monitors, LLCph: 989.928.1806, fax: 480.247.4983 e-mail: pete@remotetankmonitors.comwebsite: www.remotetankmonitors.comthe way down.