M-572 - High Pressure Unions Brochure

34ConnectorsTesting Upchurch Scientific® VHP unions in Oak Harbor, WA.Eliminate tubing twist The new Swivel Barb Adapters won’t twist peristaltic tubing as you tighten the adapter into a threaded port. See page 58 for detailsFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.comIDEX Health & ScienceDear CustomerWe are pleased to present our 2011/2012 catalog, which includes Innovadyne™, Ismatec®, Isolation Technologies™, Rheodyne®, Systec®, and Upchurch Scientific® products. In this catalog, you will find all the critical fluidic products and high-quality components you’ve come to expect from IDEX Health & Science. This catalog has a new ‘look and feel’, with a new organization to all of our products. Now, you will be able to find all of our fittings in one chapter, with separate chapters for products like tubing, valves, pumps, etc. And, as always, we have many new products – including some very innovative UHPLC fittings and accessories – scattered throughout the catalog that we hope will prove useful to you. We appreciate your business and continued loyalty to our family of products and services and thank you for trusting IDEX Health & Science with your liquid handling needs. Your feedback is valuable, so please let us know if there are ways we can be of greater service.Joe Stupfel VP Marketing & Research, Development & Engineering IDEX Health & Science LLCIDEX Health & Science Contact Information NORTH / SOUTH AMERICAIDEX Health & Science LLC 619 Oak Street Oak Harbor, WA 98277 USA Tel: +1 800 426 0191 Fax: +1 800 359 3460 Fax: +1 360 679 3830 E-mail: CustomerService.hs@idexcorp.comEUROPEIDEX Health & Science GmbH Futtererstrasse 16 97877 Wertheim Germany Tel: +49 (0) 1801 808 800 Fax: +49 (0) 9377 1388 E-mail: CustomerService.hseurope@idexcorp.comASIAIDEX Trading (Shanghai) Co. Ltd Room 1701A CBD International Plaza No. 16 Yong An Dong Li Beijing, China 100022 Tel: +86 10 6566 9090 Fax: +86 10 6567 5152 E-mail: CustomerService.hsasia@idexcorp.comIDEX Asia Pacific Pte Ltd63 Hillview Avenue #07-08 Lam Soon Industrial Building Singapore 669569 Tel: +65 6314 6145 Fax: +65 6764 4020 E-mail: CustomerService.hsasia@idexcorp.com IDEX India Pvt Ltd205, Matharu Arcade Plot No. 32 Subhash Road Vile Parle (East) Mumbai – 400 057 India Tel: +91 22 66 78 00 50 Fax: +91 22 66 78 00 55 E-mail: CustomerService.hsasia@idexcorp.com IDEX Health & Science6F Sanseido Bldg. 2-4 Kojimachi, Chiyoda-ku, Tokyo 102-0083, Japan Tel: +81 3 3263 5390 Fax: +81 3 3511 5890 E-mail: CustomerService.hsasia@idexcorp.comFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.comORDER 800.426.0191 • 360.679.2528 • www.idex-hs.com 1FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.comOrdering InformationFor North America orders:Tel: +1 800 426 0191 +1 360 679 2528Fax: +1 800 359 3460 +1 360 679 3830 E-mail: CustomerService.hs@idexcorp.comFor Europe orders:Tel: +49 (0) 1801 808 800 Fax: +49 (0) 9377 1388 E-mail: CustomerService.hseurope@idexcorp.comFor Asia orders: E-mail: CustomerService.hsasia@idexcorp.com NORTH ASIATel: +86 10 6566 9090Fax: +86 10 6567 5152 SOUTH AND SOUTHEAST ASIATel: +91 22 66 78 00 50Fax: +91 22 66 78 00 55 JAPANTel: +81 3 3263 5390Fax: +81 3 3511 5890For Online orders: Web: www.idex-hs.comPlease include the following information with your order: Purchase Order Number, Contact Name, Shipping and Billing Address, Telephone Number, Product Number(s) and Quantity(ies). If you are a Purchasing Agent, please include the name of the person for whom the products are ordered.For your information, our Federal Taxpayer Identification number is 01-0736657.Order Processing/ShippingOrders process within one business day and ship within two business days. Requests for earlier shipments can be made — please contact IDEX Health & Science for more details.All shipments are FCA unless otherwise noted. Shipping charges will be prepaid and added to the invoice. Or, if requested, we will charge your carrier account number.TermsTerms of payment are net 30 days. Mastercard®, Visa® and American Express® are accepted. There is no minimum order. Customers are responsible for C.O.D. charges if they elect this payment method. Terms and prices are subject to change without notice. Visit www.idex-hs.com for complete Terms & Conditions.Return of MaterialsReturns must be authorized in advance. Please contact us within 30 days of purchase for your Returns Material Authorization (RMA) Number. A restocking fee may apply. The IDEX Health & Science brands represented in this catalog (Innovadyne™, Ismatec®, Isolation Technologies™, Rheodyne®, Systec®, and Upchurch Scientific®) have established relationships with a large, global network of Distributors, many of whom can offer the product support and assistance that we cannot, including: Carrying local inventory of commonly-ordered items Understanding YOUR working environment and requirements Providing technical application assistance Answering questions regarding new and existing products Complete availability during your time zone business hours Personal visits as required Access to complementary product lines to providea “one-stop shopping” experienceWe have come to rely on our authorized Distributors to provide value-added service to end-users of our products. So, while we are happy to take your order directly, we encourage you to contact your local Distributor — we feel confident it will be a positive experienceHow to Find A Local DistributorFor a complete distributor listing please visit www.idex-hs.com/distributors or email: US: CustomerService.hs@idexcorp.com Europe: CustomerService.hseurope@idexcorp.com Asia: CustomerService.hsasia@idexcorp.comOur customer service team will help you contact a distributor in your area.Return of MaterialsProduct purchased through a Distributor must be returned directly to that Distributor. Please contact them for Return Material Authorization procedures.Direct from IDEX Health & Science Direct from our Global Distribution NetworkHow to OrderThe products in this catalog are intended for use with analytical, biotechnology and diagnostic equipment and accessories. THE MANUFACTURERS OF THE PRODUCTS IN THIS CATALOG SHALL HAVE NO LIABILITY WHATSOEVER DUE TO ANY MISUSE OF THEIR PRODUCTS. Of course, the safe use of our products depends on our customers, since it is you who select and control the protective gear and safety procedures used, as well as the pressures, temperatures, solvents, samples, ventilation, and other variables. Product and material performance ratings are provided as guides only. Individual field tests should be performed by customers to determine safe operating parameters given your particular procedures and use.IDEX Health & Science facilities are certified ISO 9001. Some facilities are also certified ISO 13485:2003.Visit Us At WWW. IDEX-HS.COMCustomer Number:35ConnectorsConnectors ReferenceThis chart offers suggestions for connecting two pieces of inline tubing. The required product numbers are listed, with the appropriate page numbers listed below them in respective order. In most cases other options exist. For more information, please contact IDEX Health & Science or your local distributor.TUBING SIZE (OD)CAPILLARY (<1/32” OD) 1/32” 1mm 1/16”1.8–2 mm,2.5 mm, 3 mm 1/8” 4 mm, 3/16” 1/4” 5/16”CAPILLARY (<1/32” OD)P-720 + MTSlv or P-882 or P-772 or P-779 + (2) NTSlvPages: 39, 19, 53, 39, 38, 19P-779 + (2) NTSlvPages: 38, 19P-779 + (2) NTSlvPages: 38, 19P-779 + NTSlvPages: 38, 19P-627-01 + NTSys + MFF + XP-3351Pages: 49, 19, 27, 26, P-627 + NTSys + XP-3351Pages: 49, 19, 26P-135 + P-259 + NTSys + LT-1152 +LBFF + XP-132Pages: 49, 22, 61, 17, 22, 153, 27, 30, 30, U-665 + P-259 + NTSlv + LT-1152Pages: 49, 22, 61, 19, 22, 153U-665-01 + XU-662 + P-259 + NTSlv + LT-1152Pages: 49, 30, 22, 61, 19, 22, 1531/32”P-779 + (2) NTSlvPages: 38, 19P-771Page: 39P-779 + F-247 + F-252Pages: 38, 19, 19, 27P-881Page: 53P-702-01 + P-248 + LT-1152 + MFF +XP-3351Pages: 40, 22, 22, 153, 27, 26P-702-01 + P-248 + LT-1152 + XP-3351Pages: 40, 22, 22, 22, 153, 26P-135 + P-248 + LT-1152 + LBFF + XP-132Pages: 49, 22, 22, 153, 37, 30, 30U-665 + P-248 + LT-1152Pages: 49, 22, 22, 153U-665-01 + XU-662 + P-248 + LT-1152Pages: 49, 30, 22, 22, 1531 mmP-779 + (2) NTSlvPages: 38, 19P-779 + F-247 + F-252Pages: 38, 19, 19, 27P-702-01 + (2) XP-2353 + (2) F-252Pages: 40, 25, 19, 27P-702 + F-252Pages: 40, 19, 27P-622 + P-200 + F-252 + P-247 + MFF + P-347Pages: 40, 24, 25, 19, 27, 27, 27, 27P-702 + F-252 + XP-3351Pages: 40, 19, 27, 26,P-135 + XP-2353 + F-252 + LBFF + XP-132Pages: 49, 25, 19, 27, 30, 30U-665 + XP-2353 + F-252Pages: 49, 25, 19, 27U-665-01 + XU-662 + XP-2353 + F-252 Pages: 49, 30, 25, 19, 271/16”P-779 + NTSlvPages: 38, 19P-881Page: 53P-702 + F-252Pages: 40, 19, 27P-742 or P-702Pages: 38, 40P-622 + P-200 + P-247 + MFF + P-347Pages: 40, 24, 25, 27, 27, 27P-703 + XP-2353Pages: 40, 25P-135 + XP-2353 + LBFF + XP-132Pages: 49, 25, 27, 30, 30U-665 + XP-2353Pages: 49, 25U-665-01 + XU-662 + XP-2353Pages: 49, 30, 251.8–2 mm, 2.5 mm, 3 mmP-627-01 + NTSys + MFF + XP-3351Pages: 49, 17, 27, 26P-702-01 + P-248 + LT-1152 + MFF +XP-3351Pages: 40, 22, 22, 153, 27, 26P-622 + P-200 + F-252 + P-247 + MFF + P-347Pages: 40, 25, 19, 27, 27, 27, 27P-622 + P-200 + P-247 + MFF + P-347Pages: 40, 25, 27, 27, 27P-622 + (2) MFF + (2) P-347Pages: 40, 27, 27P-622 + MFF + P-300 + (2) P-347Pages: 40, 27, 26, 27P-135 + MFF + P-355 + LBFF + XP-132Pages: 49, 27, 23, 27, 30, 30U-665 + MFF + XP-3351Pages: 49, 27, 26U-665-01 + XU-662 + MFF + XP-3351Pages: 49, 30, 27, 261/8”P-627 + NTSys + XP-3351Pages: 49, 17, 26P-702-01 + P-248 + LT-1152 + XP-3351Pages: 40, 22, 22, 153, 26P-702 + F-252 + XP-3351Pages: 40, 19, 27, 26P-703 + XP-2353Pages: 40, 25P-622 + MFF + P-300 + (2) P-347Pages: 40, 27, 26, 27P-703Page: 40P-135 + XP-3351 + LBFF + XP-132Pages: 49, 26, 27, 30, 30U-665 + XP-3351Pages: 49, 26U-665-01 + XU-662 + XP-3351Pages: 49, 30, 264 mm, 3/16”P-135 + P-259 + NTSys + LT-1152 +LBFF + XP-132Pages: 49, 22, 61, 17, 22, 153, 30P-135 + P-248 + LT-1152 + LBFF +XP-132Pages: 49, 22, 22, 153, 27, 30, 30P-135 + XP-2353 +F-252 + LBFF + XP-132Pages: 49, 25, 19, 27, 27, 30, 30P-135 + XP-2353 + LBFF + XP-132Pages: 49, 25, 27, 30, 30P-135 + MFF + XP-3351 + LBFF +XP-132 Pages: 49, 27, 26, 27, 30, 30P-135 + XP-3351 + LBFF + XP-132Pages: 49, 26, 27, 30, 30P-134 + (2) LBFF + (2) XP-132Pages: 41, 27, 30, 30U-659 + LBFF + XP-132Pages: 49, 27, 30, 20U-659-01 + XU-662 + LBFF + XP-132Pages: 49, 30, 27, 30, 301/4”U-665 + P-259 + NTSlv + LT-1152Pages: 49, 22, 61, 19, 22, 153U-665 + P-248 + LT-1152Pages: 49, 22, 22, 153U-665 + XP-2353 + F-252Pages: 49, 25, 19, 27U-665 + XP-2353Pages: 49, 25U-665 + MFF + XP-3351Pages: 49, 27, 26U-665 + XP-3351Pages: 49, 26U-659 + LBFF + XP-132Pages: 49, 27, 30, 30U-658Page: 41U-658 + XU-662Pages: 41, 305/16”U-665-01 + XU-662 + P-259 + NTSlv + LT-1152Pages: 49, 30, 22, 61, 19, 22, 153U-665-01 + XU-662 + P-248 + LT-1152Pages: 49, 30, 22, 22, 153U-665-01 + XU-662 + XP-2353 + F-252 Pages: 49, 30, 25, 19, 27U-665-01 + XU-662 + XP-2353Pages: 49, 30, 25U-665-01 + XU-662 + MFF + XP-3351Pages: 49, 30, 27, 26U-665-01 + XU-662 + XP-3351Pages: 49, 30, 26U-659-01 + XU-662 + LBFF + XP-132Pages: 49, 30, 27, 30, 30U-658 + XU-662Pages: 41, 30U-664Page: 41MTSlv MicroTight® Sleeves. Select the appropriate MicroTight Sleeve(s) for your tubing OD size.NTSys NanoTight™ System. Select the appropriate NanoTight Sleeve(s) for your tubing OD size, and NanoTight fitting(s).NTSlv Select the appropriate NanoTight Sleeves for your tubing OD size.MFF Select the appropriate Metric Flangeless Ferrule(s) for your tubing OD size. Choose from P-342, P-343 and P-353.LBFF Select from the following Large-Bore Flangeless Ferrules: P-133 (3/16” OD) or P-139 (4.0 mm OD).-01 Denotes a union or adapter without fittings.1 While XP-335 is listed, any of our Flangeless Fittings for 1/8” OD tubing from page 26 will work in this application.2 While LT-115 is listed, any 1/4-28 Super Flangeless™ Nut for 1/16” OD tubing from page 22 will work in this application.3 While XP-235 is listed, any 1/4-28 Flangeless Fitting for 1/16” OD tubing from page 25 will work in this application.Connectors Reference ChartFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com36ConnectorsVHP Stainless Steel ZDV Unions Supplied with fittings for 1/16” OD or 1/8” OD tubing Manufactured from 316 stainless steel All union assemblies rated to 20,000 psi (1,380 bar) or higherThese Upchurch Scientific®, high pressure, zero-dead-volume (ZDV) unions, manufactured by IDEX Health & Science, are precision machined from 316 stainless steel, carefully passivated, then thoroughly rinsed. Each comes complete with stainless steel nuts and ferrules.VHP UnionsPart No. Description Threads Includes Thru-hole Swept Volume Pressure Rating PriceVHP STAINLESS STEEL ZDV UNIONS1593 Stainless Steel Union for 1/8” OD Tubing 1/4-28 Coned (2) C-235/C-236 0.050” (1.25 mm) 1.48 µL 20,000 psi (1,380 bar) $ 45.49U-402 Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) U-400/U-401 0.020” (0.50 mm) 0.13 µL 20,000 psi (1,380 bar) 25.51U-411 Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) U-400/U-401 0.007” (178 µm) 13 nL 20,000 psi (1,380 bar) 40.93U-435 Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) U-400/U-401 0.010” (0.25 mm) 20 nL 20,000 psi (1,380 bar) 30.70U-437 Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) U-400/U-401 0.050” (1.25 mm) 0.84 µL 20,000 psi (1,380 bar) 23.19U-438 Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) U-400/U-401, (1) P-554 Gauge Plug 0.067” (1.70 mm) Near 0 µL 20,000 psi (1,380 bar) 23.19UH-402 VHP+ Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) VHP-200 0.010” (0.25mm) 20 nL 30,000 psi (2,070 bar) 40.76SSI COMPATIBLE ZDV UNIONU-352 Stainless Steel Union for 1/16” OD Tubing 1/4-28 Coned (2) U-350/U-351 0.020” (0.50 mm) 0.18 µL 20,000 psi (1,380 bar) $ 34.77VICI® (VALCO) COMPATIBLE ZDV UNIONU-322 Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) U-320/U-321 0.020” (0.50 mm) 0.15 µL 20,000 psi (1,380 bar) $ 34.80WATERS® COMPATIBLE ZDV UNIONU-412 Stainless Steel Union for 1/16” OD Tubing 10-32 Coned (2) U-410/U-401 0.020” (0.50 mm) 0.10 µL 20,000 psi (1,380 bar) $ 27.87U-352SSI Compatible ZDV Union0.020” thru-hole for 1/16” OD tubing0.38” (0.97 cm)0.91” (2.31 cm)0.84” (2.13 cm)0.31” (0.79 cm)U-402 ZDV Union0.020” thru-hole for 1/16” OD tubing0.84” (2.13 cm)0.31” (0.79 cm)U-435 ZDV Union0.010” thru-hole for 1/16” OD tubing0.84” (2.13 cm)0.31” (0.79 cm)0.84” (2.13 cm)0.31” (0.79 cm)1.20” (3.05 cm)0.38” (0.97 cm)U-438 True ZDV Union0.067” thru-hole for 1/16” OD tubing1593 ZDV Union0.050” thru-hole for 1/8” OD tubingU-437 ZDV Union0.050” thru-hole for 1/16” OD tubingU-322VICI (Valco) Compatible ZDV Union0.020” thru-hole for 1/16” OD tubingU-412Waters Compatible ZDV Union0.020” thru-hole for 1/16” OD tubing1.02” (2.59 cm)0.31” (0.79 cm)U-411NanoTight™ Union0.007” thru-hole for 1/16” OD tubingUH-402VHP+ Union0.010” thru-hole for 1/16” OD tubingIt is possible to order the products on this page without the fittings. Simply use a -01 at the end of the product number to order the union body without fittings.NoteTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com37ConnectorsUH-436UHP MicroTight Unionfor 360 µm OD tubing with fittings and capsule union includedUH-632UHP MicroTight Unionfor 1/32” OD tubing with fittings includedUH-432UHP MicroTight® Unionfor 1/32” OD tubing with fittings and capsule union included1.24” (3.15 cm)0.37” (0.94 cm)1.24” (3.15 cm)0.37” (0.94 cm)1.25” (3.18 cm)0.32” (0.81 cm)VHP UnionsOrder Online WWW. IDEX-HS.COMVHP Unions for Capillary Tubing Featuring stainless steel bodies and PK/PEEK™ fittings Pressure rated up to 15,000 psi (1,034 bar) Options to direct-connect both 1/32” OD tubing and 360 µm OD tubingUpchurch Scientific® has expanded its line of specialized fittings and connectors for UHPLC applications to include several innovative unions and adapters.Two of these products — the UH-432 and UH-436 — follow the design of our popular Mini MicroFilters (see page 165) and allow a convenient union between either 1/32” OD tubing or 360 µm OD tubing. Each features a stainless steel union body and a unique stainless steel union capsule, enabling both excellent chemical compatibility as well as conductivity, making these a great choice for electrical interfacing in certain LC-MS applications. Each is also coupled with direct-connect ferrules made from our proprietary PEEK polymer blend (PK), allowing tubing connections up to 15,000 psi (1,034 bar). (Please Note: While these connectors can be used at elevated pressures, they are not recommended for applications above 100 ºC.)The UH-632 is a more traditionally designed connector, incorporating internally threaded ports. The union (UH-632) features a true ZDV (zero dead volume) connection between both tubes. This unique product is coupled with our one-piece Ultra-High Performance Fingertight fittings manufactured from our proprietary PEEK polymer blend, allowing them to be used in high temperature applications (up to 200 ºC) at pressures up to 6,000 psi (414 bar) — or use these connectors at room temperature up to 15,000 psi (1,034 bar) Find replacement VHP fittings on page 9 Find Fused Silica tubing on page 65 Find 1/32” OD Stainless Steel tubing on page 68 – 69 To achieve 15,000 psi (1,034 bar) with these fittings, use the P-278 extender tool found on page 8Related ProductsPart No. Description Threads Includes Thru-hole Swept Volume Pressure Rating PriceVHP UNIONS FOR CAPILLARY TUBINGUH-432 MicroTight Union for 1/32” OD Tubing, PEEK/SST 5/16-24 Coned (2) PK-112, (2) P-416 0.006” (0.150 mm) 5 nL 15,000 psi (1,034 bar) $ 87.06UH-436 MicroTight Union for 360 µm OD Tubing, PEEK/SST 5/16-24 Coned (2) PK-152, (2) P-416BLK 0.006” (0.150 mm) 5 nL 15,000 psi (1,034 bar) 87.06UH-632 MicroTight True ZDV Union for 1/32” OD Tubing, PEEK/SST 6-32 Coned (2) PK-126, (1) P-553 Gauge Plug N/A N/A 15,000 psi (1,034 bar) 51.82Top Seller SEE STARRED PRODUCTSApplication NoteWhat is a True ZDV Union?True zero dead volume (ZDV) unions are designed so that the two joined pieces of tubing butt perfectly together as shown in the image to the right. These products have no swept volume contained within the union body. The fluid moves directly from one tube into another in this type of connector.When using true ZDV unions, it is important to take care to ensure connecting tubing has burr-free 90 degree ends. Find tubing cutters on page 74 to assist with cleanly cutting polymer and fused silica tubing. Gauge plugs are supplied with True ZDV Unions to assist with assembly. With the gauge plug inserted into one side of the union, a hard stop is created for the tubing to bottom out against as it is connected to the opposite port. The gauge plug is removed and then the second piece of tubing is connected, using the first piece of tubing to bottom out against resulting in the two tubes joined together in the center of the union.Butt JointTubingNutFerruleUnionTrue Zero Dead-Volume ConnectionFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com38ConnectorsHigh Pressure UnionsPEEK™ ZDV UnionsUpchurch Scientific® PEEK zero-dead-volume (ZDV) Unions come complete with two F-300 Fingertight Fittings for 1/16” OD tubing and are pressure rated to 5,000 psi (344 bar).P-704PEEK ZDV Union0.020” thru-holewith F-300 Fittings0.31” (0.79 cm)0.92” (2.34 cm)0.31” (0.79 cm)0.92” (2.34 cm)P-742PEEK ZDV Union0.010” thru-holewith F-300 FittingsP-760PEEK ZDV Union0.050” thru-holewith F-300 Fittings0.31” (0.79 cm)0.92” (2.34 cm)Part No. Description Threads Includes Thru-hole Swept Volume Pressure Rating Price PEEK ZDV UNIONSP-704 PEEK Union for 1/16” OD Tubing 10-32 Coned (2) F-300 0.020” (0.50 mm) 0.28 µL 5,000 psi (344 bar) $ 29.26P-742 PEEK Union for 1/16” OD Tubing 10-32 Coned (2) F-300 0.010” (0.25 mm) 0.07 µL 5,000 psi (344 bar) 29.26P-760 PEEK Union for 1/16” OD Tubing 10-32 Coned (2) F-300 0.050” (1.25 mm) 1.2 µL 5,000 psi (344 bar) 29.26NANOTIGHT UNIONP-779 PEEK NanoTight Union for 1/16” OD Tubing and Tubing Sleeves 10-32 Coned (2) F-331N 0.005” (125 µm) 8 nL 5,000 psi (344 bar) $ 46.56COLUMN COUPLERSU-281 PCTFE Column Coupler 10-32 Coned N/A 0.020” (0.50 mm) 6.0 µL 4,000 psi (276 bar) $ 33.23U-283 PCTFE Column Coupler with 0.007” ID Stainless Steel Tubing 10-32 Coned (2) F-100 0.007” (0.17 mm) 1.3 µL 4,000 psi (276 bar) 20.80U-284 Delrin Column Coupler with 0.007” ID Stainless Steel Tubing 10-32 Coned (2) F-200 0.007” (0.17 mm) 1.3 µL 5,000 psi (345 bar) 15.75U-287 PEEK Column Coupler with 0.010” ID PEEK Tubing 10-32 Coned (2) F-300 0.010” (0.25 mm) 3.6 µL 5,000 psi (345 bar) 19.45U-288 PEEK Column Coupler 10-32 Coned N/A 0.022” (0.56 mm) 7.2 µL 5,000 psi (345 bar) 34.94Column Couplers Low swept-volume connectionsThese universal column couplers permit a low swept-volume connection, with minimal loss in column efficiency. These couplers will connect most columns with 10-32 internal threads to a precolumn filter or guard column with the same threads. They may also be used to join two columns in series.Upchurch Scientific manufactures two styles of column couplers. One version is a single piece that makes coupling columns to guard columns or precolumn filters easy and hassle-free. We also offer our traditional couplers that consist of two Fingertight fittings and a short length of 1/16” OD tubing—an excellent option for reducing overall flow path volume while coupling two devices together reliably.NanoTight™ UnionsUpchurch Scientific NanoTight Union improves capillary tubing connections in several ways. The internal design of the unions greatly reduces the incidence of tubing misalignment. When using 1/16” OD tubing sleeves (found on page 19) to connect capillary tubing, the webbed thru-hole minimizes breaking of fused silica while adding only miniscule swept volume. The results are fewer blockages, fewer flow rate reductions and fewer back pressure problems. 0.83” (2.11 cm)0.28” (0.71 cm)10-3210-32P-779NanoTight Union0.005” thru-holewith F-331N FittingsU-281PCTFE Column couplerfor 10-32 standard portsU-288PEEK Column couplerfor 10-32 standard ports0.50” (1.27 cm)1.16” (2.95 cm)0.50” (1.27 cm) 1.16” (2.95 cm)U-284Delrin® Column couplerfor 10-32 standard portsU-287PEEK Column couplerfor 10-32 standard ports0.51” (1.30 cm)0.51” (1.30 cm)2.05” (5.21 cm)2.80” (7.11 cm)Top Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com39ConnectorsHigh Pressure Capillary UnionsPart No. Description Threads Includes Thru-hole Swept Volume Pressure Rating PriceMICROTIGHT UNIONSP-720 PEEK True ZDV Union for MicroTight Sleeves 6-32 Coned (2) F-125, (1) P-553 N/A N/A 4,000 psi (276 bar) $ 33.12P-771 PEEK True ZDV Union for 1/32” OD Tubing 6-32 Coned (2) F-126S, (1) P-553 N/A N/A 5,000 psi (345 bar) 33.12P-772 PEEK Union for 360 µm OD Tubing 5/16-24 Coned (2) F-152, (2) P-416BLK 0.006” (0.150 mm) 5 nL 5,000 psi (345 bar) 36.71P-874 PEEK MicroElbow for MicroTight Sleeves 5/16-24 Coned (2) F-172, (2) P-416 0.006” (0.150 mm) 20 nL 4,000 psi (276 bar) 103.08REPLACEMENT GAUGE PLUGS (TO ACHIEVE TRUE ZDV CONNECTIONS WITH OUR P-720 AND P-771 UNIONS)P-553 Gauge Plug, Delrin® 6-32 Coned N/A N/A N/A N/A $ 5.90CONDUCTIVE MICROTIGHT UNIONSM-539 Conductive Union for 1/32” OD tubing, PEEK/SST 5/16-24 Coned (2) F-112, (2) P-416, (1) M-138NF 0.006” (0.150 mm) 5nL 5,000 psi (345 bar) $ 86.04M-572 Conductive Union for 360 µm OD Tubing, PEEK/SST 5/16-24 Coned (2) F-152, (2) P-416BLK, (1) M-128NF 0.011” (0.279 mm) 16 nL 5,000 psi (345 bar) 79.14INSULATING MOUNTING BRACKETM-447 Insulating Mounting Bracket N/A N/A N/A N/A N/A $ 37.51Conductive MicroTight UnionsThe Upchurch Scientific Conductive MicroTight Unions manufactured by IDEX Health & Science provide an excellent opportunity to introduce voltage into an electrospray or capillary electrophoresis system. With an extremely low internal volume of 16 nL or 5 nL, these unions can be placed inline with 360 µm or 1/32” OD capillary tubing. Mount and apply voltage to these unions using our Insulating Mounting Bracket below.Insulating Mounting BracketUse our Insulating Mounting Bracket to easily integrate the Conductive Mini MicroFilters shown above into your system or lab.The product snaps into place. Voltage from your lead wire is conducted through the attaching stainless steel nut and screw (included), then onto the mounted product via the stainless steel clip.The bracket’s base includes two holes (#2 screw clearance) for easy mounting onto any lab surface. Dimensions are 1.25” L x 0.45” W x 0.63” H.Insulating Mounting Bracket, shown with lead wire and Conductive MicroTight Union, not included.M-572Conductive MicroTight Union for 360 µm OD tubingwith fittings and Capsule Union included0.76” (1.93 cm)0.38” (0.97 cm)M-539Conductive MicroTight Unionfor 1/32” OD tubingwith fittings and Capsule Union included0.76” (1.93 cm)0.38” (0.97 cm)For an example of using a conductive MicroTight Union in a pressure driven ion preconcentration application see: “Self-Sealed Vertical Polymeric Nanoporous Junctions for High Throughput Nanofluidic Applications.“ Sun Jae Kim and Jong Yoon Han. Analytical Chem. 2008, 80: 3507-3511Application NoteMicroTight® Connectors for Capillary TubingConnect two pieces of capillary tubing with these Upchurch Scientific®PEEK™ MicroTight Connectors. The True ZDV Unions allow two pieces of tubing to connect directly to each other — using the included gauge plug to ensure proper alignment. The standard union and elbow both feature a 0.006” (0.150 mm) thru-hole, adding only a small amount of additional flow-path volume to help ensure proper chromatographic results. For MicroTight unions designed for UHPLC applications, see page 37.P-720MicroTight True ZDV Unionfor use with MicroTight Sleeveswith fittings and gauge plug included0.76” (1.93 cm)0.25” (0.64 cm)6-326-320.76” (1.93 cm)0.25” (0.64 cm)6-326-32P-771MicroTight True ZDV Union for 1/32” OD tubingwith fittings and gauge plug includedP-772MicroTight Unionfor 360 µm OD tubing with fittings included0.81” (2.06 cm)0.31” (0.79 cm)5/16-245/16-240.44” (1.12 cm)P-874MicroElbow for MicroTight Tubing Sleeveswith fittings included0.125” (0.32 cm) hole diameter1.00” (2.54 cm)0.31” (0.79 cm)0.81” (2.06 cm)Top Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com40ConnectorsLow Pressure Unions Manufactured from PEEK™, ETFE, Delrin®, polypropylene or PCTFE Available with 1/4-28, M6 or 10-32 flat-bottom threadsUpchurch Scientific® Low Pressure Unions are available in a variety of polymers, providing several low-cost and chemically-resistant options. The union assemblies below include fittings as shown in the table. The unions in the right column do not include fittings, allowing for customizing the fitting selection. In some cases, a union can be configured to connect two different tubing sizes – for example, if 1/4-28 Flangeless fittings for 1/16” and 1/8” OD tubing were selected from pages 25 and 27 they can be used with the P-603 union to connect the two different tubing sizes.Low Pressure Metric UnionsP-602 & P-622Metric Unions(M6 internal threads)0.82” (2.08 cm)0.37” (0.94 cm)Low Pressure Standard UnionsP-603, P-620 & P-623Standard Unions(1/4-28 internal threads)0.81” (2.06 cm)0.37” (0.94 cm)Low Pressure Unions To use connectors in higher pressure applications, simply replace the provided fittings with Super Flangeless™ Nuts and Ferrules, found on pages 21 – 23. Use any of the 10-32 flat-bottom fittings on page 21 and 28 to make an inline connection with our VacuTight Union. This product is designed for use with 1/16” OD tubing.Related ProductsLow Pressure Male UnionP-645PCTFE Union(1/4-28 external threads)0.38” (0.97 cm)1.24” (3.15 cm)P-845-01PEEK Union(10-32 internal threads)0.76” (1.93 cm)0.25” (0.64 cm)VacuTight™ UnionLow Pressure PEEK Union Assemblies0.78” (1.98 cm)0.44” (1.12 cm)P-702 & P-703PEEK Unionswith Flangeless Fittings(1/4-28 internal threads)0.37” (0.94 cm)0.81” (2.06 cm)P-630 & P-631ETFE Unions with Flangeless Fittings (1/4-28 internal threads)Low Pressure ETFE Union Assemblies0.37” (0.94 cm)0.81” (2.06 cm)P-710ETFE Union with Flangeless Fittings (1/4-28 internal threads)Part No. Description Color Threads Includes Thru-hole Swept Volume Pressure Rating PricePEEK UNION ASSEMBLIESP-702 PEEK Union for 1/16” OD Tubing Natural 1/4-28 FB (2) XP-235 0.020” (0.50 mm) 0.41 µL 1,000 psi (69 bar) $ 19.29P-703 PEEK Union for 1/8” OD Tubing Natural 1/4-28 FB (2) XP-335 0.050” (1.25 mm) 2.57 µL 1,000 psi (69 bar) 19.29ETFE UNION ASSEMBLIESP-630 ETFE True ZDV Union for 1/16” OD Tubing Natural 1/4-28 FB (2) P-200N/P-245 N/A N/A 1,000 psi (69 bar) $ 9.54P-631 ETFE True ZDV Union for 1/8” OD Tubing Natural 1/4-28 FB (2) P-300N/P-345 N/A N/A 1,000 psi (69 bar) 9.54P-710 ETFE Union for 1/16” OD Tubing Natural 1/4-28 FB (2) XP-245 0.030” (0.75 mm) 0.93 µL 1,000 psi (69 bar) 14.95STANDARD UNIONSP-603 Delrin True ZDV Standard Union Natural 1/4-28 FB N/A N/A N/A N/A* $ 2.63P-620 Polypropylene True ZDV Standard Union Natural 1/4-28 FB N/A N/A N/A N/A* 2.63P-623 ETFE True ZDV Standard Union Natural 1/4-28 FB N/A N/A N/A N/A* 4.08METRIC UNIONSP-602 Delrin Metric Union Black M6 FB N/A 0.020” (0.50 mm) 0.41 µL N/A* $ 4.08P-622 ETFE Metric Union Blue M6 FB N/A 0.020” (0.50 mm) 0.41 µL N/A* 7.02MALE UNIONP-645 PCTFE Male Union Natural 1/4-28 FB N/A 0.062” (1.60 mm) 61.3 µL 500 psi (34 bar) $ 11.68VACUTIGHT UNIONP-845-01 PEEK Union for 1/16” OD Tubing Red 10-32 FB N/A 0.020” (0.50 mm) 0.20 µL N/A* $ 11.68* Pressure Rating depends on Fittings selected. See pressure rating for fittings on appropriate page. FB = Flat-BottomTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com41ConnectorsLow Pressure UnionsBulkhead Unions Designed for plumbing tubing through equipment housing For use with standard 10-32 coned, 1/4-28 or M6 flat-bottom threaded fittingsThread Upchurch Scientific® PEEK™ Bulkhead Unions directly through your equipment housing to connect internal tubing to the outside. Each union has unique 3/8-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place. Requires a 3/8” hole to mount. The recommended torque limit for these unions is 15 in.– lbs (1.7 N·m).Elbow ConnectorsUse these Elbow Connectors to easily navigate tight corners. One Elbow is designed for use with 1/16” OD tubing and has a 0.020” (0.50 mm) thru-hole. Use 1/8” OD tubing with the other Elbow, which has a 0.062” (1.60 mm) thru-hole. Both come complete with 1/4-28 PEEK nuts and ETFE ferrules, and are pressure rated to 1,000 psi (69 bar).P-430PEEK Elbowcomes with Flangeless Fittings1/4-28 threads0.38” (0.97cm)0.67” (1.70 cm)P-430P-442P-441Part No. Description Threads Color Includes Thru-hole Swept Volume PriceBULKHEAD UNIONSP-440 PEEK Bulkhead Union 10-32 Coned Natural (1) SST Nut/Washer 0.020” (0.50 mm) 1.9 µL $ 14.36P-441 PEEK Bulkhead Union 1/4-28 Flat-Bottom Red (1) SST Nut/Washer 0.040” (1.00 mm) 2.9 µL 14.36P-441N PEEK Bulkhead Union 1/4-28 Flat-Bottom Natural (1) SST Nut/Washer 0.040” (1.00 mm) 2.9 µL 14.36P-442 PEEK Bulkhead Union M6 Flat-Bottom Black (1) SST Nut/Washer 0.040” (1.00 mm) 2.9 µL 17.79ELBOW CONNECTORSP-430 PEEK Elbow for 1/16” OD Tubing 1/4-28 Flat-Bottom Natural (2) XP-235 0.020” (0.50 mm) 1.4 µL $ 45.87P-432 PEEK Elbow for 1/8” OD Tubing 1/4-28 Flat-Bottom Natural (2) XP-335 0.062” (1.60 mm) 13.6 µL 45.87LARGE BORE UNIONSP-134 PEEK True ZDV Union 5/16-24 Flat-Bottom Natural N/A N/A N/A $ 14.04U-658 PEEK Union for 1/4” OD Tubing 1/2-20 Flat-Bottom Black N/A 0.188” (4.80 mm) 57 µL 32.68U-664 PEEK Union for 5/16” OD Tubing 1/2-20 Flat-Bottom Black N/A 0.188” (4.80 mm) 57 µL 33.81P-4411/4-28 internal threads0.59” (1.50 cm)0.84” (2.13 cm)0.59” (1.50 cm)0.84” (2.13 cm)P-442M6 internal threadsBulkhead Unionincludes stainless steel nut/lock washerP-44010-32 internal threads0.59” (1.50 cm)0.84” (2.13 cm) Stainless Steel Bulkhead Unions are also available. Please contact us for more information. To use Elbows in higher pressure applications, simply replace the provided fittings with Super Flangeless™ Nuts and Ferrules, found on pages 21 – 23.Related ProductsP-134PEEK ZDV Union0.44” (1.12 cm)0.68” (1.73 cm)1.23” (3.12 cm)0.78” (1.98 cm)U-658 & U-664PEEK Unionswith Flangeless Fittings5/16-241/2-201/2-20Large Bore Unions 5/16-24 and 1/2-20 flat-bottom threadsUse any of the 5/16-24 fittings on page 56 and the appropriate ferrule to create a true zero dead volume (ZDV) connection with the P-134 Union. Our U-658 and U-664 Unions are designed to be used with our standard 1/2-20 flat-bottom threaded nuts and ferrules (included with the U-658 and U-664 assemblies).Top Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com42ConnectorsVHP Tees & Crosses for 1/16” OD TubingIDEX Health & Science offers Very High Pressure Connectors, designed to bring three or four pieces of tubing together. The all-316 stainless steel connectors are designed for 1/16” OD tubing, and are pressure rated to 30,000 psi (2,070 bar).Part No. Description Threads Includes Thru-hole Swept Volume Pressure Rating PriceSTAINLESS STEEL UNIONS, TEES, CROSSESUH-427 VHP Tee for 1/16” OD Tubing, SST 10-32 Coned (3) VHP-200 0.020” (0.50 mm) 0.57 µL 30,000 psi (2,070 bar) $ 78.53UH-429 VHP Cross for 1/16” OD Tubing, SST 10-32 Coned (4) VHP-200 0.020” (0.50 mm) 0.72 µL 30,000 psi (2,070 bar) 97.07VHP TEES & CROSSES FOR CAPILLARY TUBINGUH-700 VHP MicroTee for 1/32” OD Tubing, PEEK™/SST 5/16-24 Coned (3) PK-112, (3) P-416 0.010” (0.25 mm) 84 nL 15,000 psi (1,034 bar) $ 123.70UH-702 VHP MicroCross for 1/32” OD Tubing, PEEK/SST 5/16-24 Coned (4) PK-112, (4) P-416 0.010” (0.25 mm) 101 nL 15,000 psi (1,034 bar) 141.32UH-750 VHP MicroTee for 360 µm OD Tubing, PEEK/SST 5/16-24 Coned (3) PK-152, (3) P-416BLK 0.010” (0.25 mm) 84 nL 15,000 psi (1,034 bar) 78.57UH-752 VHP MicroCross for 360 µm OD Tubing, PEEK/SST 5/16-24 Coned (4) PK-152, (4) P-416BLK 0.010” (0.25 mm) 101 nL 15,000 psi (1,034 bar) 141.32VHP Tees and CrossesWhy 1/32” OD Tubing and 360 µm OD Tubing?IDEX Health & Science has focused strongly on the development of a variety of connectors and accessories for 1/32” OD tubing and 360 µm OD tubing. We have focused on these specific sizes due to their overwhelming popularity in analytical instruments, especially where micro and nano-scale analyses are being performed. By creating products designed for these popular sizes, the overall connection is easier to make and generally holds to increased pressures over connections where tubing sleeves are involved.Application NoteVHP Tees & Crosses for Capillary Tubing Direct-connect either 360 µm or 1/32” OD tubing — no sleeves required Available in both tee and cross configurations Pressure rated to 15,000 psi (1,034 bar)To help facilitate multi-port connections in UHPLC applications, Upchurch Scientific® has developed a line of MicroTees and MicroCrosses, manufactured from stainless steel and featuring small thru-holes and very low internal volume. Additionally, the stainless steel construction allows these products to be used in applications where electrical conductivity is desired.Included with the MicroTees and MicroCrosses are the VHP MicroFerrules found on page 9. The P-278 Extender Tool on page 33 can be used to tighten the female nuts that are included with these connectors.UH-752VHP MicroCrossfor 360 µm OD tubing with fittings includedUH-750VHP MicroTeefor 360 µm OD tubing with fittings includedUH-429VHP Crossfor 1/16” OD tubing with fittings included0.89” (2.26 cm)0.89” (2.26 cm)UH-427VHP Teefor 1/16” OD tubing with fittings included0.89” (2.26 cm)0.60” (1.52 cm)1.19” (3.02 cm) 0.80” (2.03 cm)1.19” (3.02 cm) 0.80” (2.03 cm)UH-702VHP MicroCrossfor 1/32” OD tubing with fittings included1.19” (3.02 cm)1.19” (3.02 cm)1.19” (3.02 cm)1.19” (3.02 cm)UH-700VHP MicroTeefor 1/32” OD tubing with fittings includedTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com43ConnectorsHigh Pressure Tees, Crosses and ManifoldsStainless Steel Tees & CrossesThese 316 stainless steel connectors come complete with 10-32 stainless steel fittings for use with 1/16” OD tubing and are rated to 20,000 psi (1,380 bar). They are compatible with any 10-32 coned threaded fittings.U-428 Stainless Steel Tee0.020” thru-holewith U-400 and U-401 FittingsU-430 Stainless Steel Cross 0.020” thru-holewith U-400 and U-401 Fittings0.60” (1.52 cm)0.89” (2.26 cm)0.89” (2.26 cm)Part No. Description Threads Includes Thru-hole Swept Volume Pressure Rating PriceSTAINLESS STEEL TEES AND CROSSESU-428 Stainless Steel Tee for 1/16” OD Tubing 10-32 Coned (3) U-400, (3) U-401 0.020” (0.50 mm) 0.57 µL 20,000 psi (1,380 bar) $ 54.89U-429 Stainless Steel Tee for 1/16” OD Tubing 10-32 Coned (3) U-400, (3) U-401 0.040” (1.00 mm) 2.1 µL 20,000 psi (1,380 bar) 52.18U-430 Stainless Steel Cross for 1/16” OD Tubing 10-32 Coned (4) U-400, (4) U-401 0.020” (0.50 mm) 0.72 µL 20,000 psi (1,380 bar) 62.59U-431 Stainless Steel Cross for 1/16” OD tubing 10-32 Coned (4) U-400, (4) U-401 0.040” (1.00 mm) 2.5 µL 20,000 psi (1,380 bar) 61.47PEEK MANIFOLDP-170 PEEK 7-Port Manifold for 1/16” OD Tubing 10-32 Coned (7) F-331 0.020” (0.50 mm) 2.2 µL 5,000 psi (345 bar) $ 89.42PEEK TEES AND CROSSESP-727 PEEK Tee for 1/16” OD Tubing 10-32 Coned (3) F-300 0.020” (0.50 mm) 0.57 µL 3,500 psi (241 bar) $ 32.10P-728 PEEK Tee for 1/16” OD Tubing 10-32 Coned (3) F-300 0.050” (1.25 mm) 3.0 µL 3,500 psi (241 bar) 32.10P-729 PEEK Cross for 1/16” OD Tubing 10-32 Coned (4) F-300 0.020” (0.50 mm) 0.72 µL 3,500 psi (241 bar) 43.55P-730 PEEK Cross for 1/16” OD Tubing 10-32 Coned (4) F-300 0.050” (1.25 mm) 3.5 µL 3,500 psi (241 bar) 43.55PEEK™ 7-Port ManifoldCombine several streams into one or split one fluid stream into several. This PEEK 7-Port Manifold comes complete with F-331 Fingertight Fittings for 1/16” OD tubing and offers a pressure rating of 5,000 psi (345 bar). Seal unused ports with any of our polymer 10-32 plugs on page 32.P-170PEEK 7-Port Manifold0.020” thru-holeswith F-331 Fittings0.96” (2.44 cm)0.75” (1.91 cm)Top View0.96” (2.44 cm)0.38” (0.97 cm)0.66” (1.68 cm)Side ViewPEEK Tees & CrossesOur PEEK Tees and Crosses include high pressure F-300 PEEK Fingertight Fittings — allowing maximum operating pressures to 3,500 psi (241 bar) when used with 1/16” OD PEEK or stainless steel tubing. P-729 PEEK Cross0.020” thru-holewith F-300 FittingsP-727 PEEK Tee0.020” thru-holewith F-300 Fittings0.67” (1.70 cm)1.09” (2.77 cm)0.71” (1.80 cm) 0.49” (1.24 cm)1.08” (2.74 cm)Mounting HoleOrder Online WWW. IDEX-HS.COMTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com44Connectors1.10” (2.79 cm)0.67” (1.70 cm)ININOUTU-466 and U-466SStatic Mixing Teeswith F-300 Fingertight Fittings for 1/16” OD tubingPressure Gauge Tee Complete with stainless steel fittingsMany HPLC systems have pumps that provide a digital readout of the inline system pressure. However, a number of systems do not, creating the need for a gauge along your 1/16” OD tubing pathway to monitor pressure. The Upchurch Scientific U-433 Pressure Gauge Tee is the solution. This Tee comes complete with 10-32 coned stainless steel fittings for 1/16” OD tubing and has an internal port suitable to connect to 1/4” pipe threads (NPT), standard to most gauges. Please Note: A pressure gauge is not included with this Tee; however, they are available from a number of laboratory supply companies.Before installing your gauge into this Tee, simply wrap PTFE tape around the male threads of your pressure gauge four times. This will ensure a leak-free seal, even at standard HPLC operating pressures.High Pressure Specialty TeesStatic Mixing Tees PEEK™ body with two-piece fingertight fittings Low swept volumeUpchurch Scientific® Static Mixing Tees are ideal for microbore or analytical gradient HPLC. They have a low swept volume of 2.2 µL (includes frit volume) and are designed for flow rates of 0.5 to 3 mL/min and a maximum pressure of 5,000 psi (345 bar). The back pressure caused by the tee is typically only 10 to 20 psi (0.7 to 1.4 bar) at these flow rates. The thru-holes are 0.020” (0.50 mm) and the center port features a 10 µm UHMWPE or stainless steel frit that aids mixing. Please Note: Turbulent mixing of solvents often increases outgassing. To maintain a bubble-free fluid pathway, we recommend solvent degassing when using this product (see the Systec® Vacuum Degassing Systems on pages 177 – 178). 0.87” (2.21 cm)0.97” (2.46 cm)U-433Pressure Gauge Teewith U-400/U-401 Stainless Steel Fittings for 1/16” OD tubingPart No. Description Threads Includes Thru-hole Swept Volume Pressure Rating PriceSTATIC MIXING TEEU-466 PEEK Static Mixing Tee for 1/16” OD Tubing, 10 µm UHMWPE Frit 10-32 Coned (3) F-300 0.020” (0.50 mm) 2.2 µL 5,000 psi (345 bar) $ 102.34U-466S PEEK Static Mixing Tee for 1/16” OD Tubing, 10 µm SST Frit 10-32 Coned (3) F-300 0.020” (0.50 mm) 2.2 µL 5,000 psi (345 bar) 102.34PRESSURE GAUGE TEEU-433 Stainless Steel Pressure Gauge Tee for 1/16” OD Tubing 10-32 Coned (2) U-400, (2) U-401 0.040” (1.00 mm) 1.2 µL 10,000 psi (690 bar) $ 56.84 The frit incorporated into our U-466 and U-466S Static Mixing Tees is not replaceable. If it becomes clogged, the Mixing Tee must be replaced.Note Our Micro Static Mixing Tee can be found on the next page. It is designed for microflow applications.Related ProductsTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com45ConnectorsMicro Static Mixing Tee Constructed of inert PEEK™ and PCTFE Low swept volume of 0.95 µL Designed for flow rates of 20 – 250 µL/minThe Upchurch Scientific® Micro Static Mixing Tee utilizes a specifically engineered internal geometry to efficiently mix two fluid streams into one combined stream. The center port also features a 0.5 µm porosity PEEK polymer frit to aid in mixing. This frit adds a maximum of 20 psi (1.4 bar) back pressure to most systems (within the stated flow rate range). The Mixing Tee handles a maximum pressure of 5,000 psi (345 bar) when directly connecting 1/16” OD tubing, or up to 4,000 psi (276 bar) with capillary tubing when using our NanoTight™Tubing Sleeves (pages 17 and 19). NanoTight Y Connector Only 17 nL of swept volumeThis product improves laminar flow over traditional MicroTee designs. The result is less turbulence and mixing when combining two fluid paths into one, or splitting one fluid path into two.The NanoTight Y Connector uses an included 1.6” (4.1 cm) long Dual-Lumen Silica SealTight™ Tubing Sleeve to accommodate two 360 µm OD capillary tubing lines. The single inlet/outlet end of the Y Connector uses the included F-242 Silica SealTight Tubing Sleeve, also designed for 360 µm OD capillary tubing. This assembly holds to 4,000 psi (276 bar), has a 0.004” (0.100 mm) thru-hole, and a swept volume of only 17 nL.The NanoTight Y Connector comes complete with NanoTight Fittings. The body of this product is made of PEEK polymer, while both of the included tubing sleeves are made of FEP. Replacement Silica SealTight Tubing Sleeves and fittings are available on page 19 — buy F-242 replacement sleeves or choose from the other available sleeves to connect capillary tubing with ODs ranging from 70 µm to 1 mm. Dual-Lumen F-235 Sleeves are listed on this page.«««PEEK FritInlet 1 OutletInlet 2M-540Micro Static Mixing Tee0.010” thru-holewith fittings included(tubing and tubing sleeves not included)Order Online WWW. IDEX-HS.COMHigh Pressure Specialty Tees Turbulent mixing of solvents often increases outgassing. Therefore, we recommend solvent degassing when using this product.Note See the Systec® Vacuum Degassing Systems on pages 177 –178. Our Static Mixing Tee on the previous page is designed for flow rates from 500 µL/min to 3 mL/min.Related ProductsPart No. Description Threads Includes Thru-hole Swept Volume Pressure Rating PriceMICRO STATIC MIXING TEEM-540 PEEK Micro Static Mixing Tee, for 1/16” OD Tubing 5/16-24 Coned (3) F-132/P-416 0.010” (0.250 mm) 0.95 µL 5,000 psi (345 bar) $ 165.62NANOTIGHT Y CONNECTOR P-773 NanoTight Y Connector, for 360 µm OD Tubing 10-32 Coned (1) F-235, (1) F-242, (2) F-331N 0.006” (0.150 mm) 17 nL 4,000 psi (276 bar) $ 108.93F-235x Dual-Lumen NanoTight Tubing Sleeves, Natural FEP, for 360 µm OD tubing, 10-pk— — — — 4,000 psi (276 bar) 28.61P-773NanoTight Y Connectorwith fittings and sleeves included360 µm TubingF-235 SleeveF-242 SleeveTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com46ConnectorsHigh Pressure Capillary Tees and CrossesMicroTee and Cross for Capillary Tubing Direct connect 1/16”, 1/32”, 360 µm OD tubing, plus other capillary tubing Low swept volumeUse Upchurch Scientific® MicroTees and MicroCrosses to join capillary tubing. All of these products are made entirely of PEEK™ and have 0.006” (0.150 mm) thru-holes, with resulting swept volumes ranging from 29 to 81 nL.Please Note: Use only the ferrules supplied with each connector — they are not interchangeable. Replacement ferrules and female nuts are available on page 18. For MicroUnions, MicroTees and MicroCrosses for UHPLC applications, see page 42.Several researchers use our PEEK MicroTee to introduce ionizing voltage to their fluid stream just prior to a Mass Spectrometer 1. MicroTees are well suited for this application due to advantageous internal geometry and PEEK polymer’s electrical resistance. The materials required for this setup are as follows: one gold or platinum conducting wire, one P-775 or P-875 MicroTee (this page), one MicroTight Tubing Sleeve (page 19) for the conducting wire (as needed to accomodate wire diameter), and at least two more MicroTight Tubing Sleeves (page 19) to connect your capillary tubing.Connect the wire to the center port of the MicroTee. First, thread your wire through the appropriate tubing sleeve, if necessary, with the wire extending beyond both ends of the sleeve. Slip the female nut included with the MicroTee over the wire or sleeved wire, followed by the ferrule — ensuring the wire (and its sleeve) extends well past the end of the ferrule tip. Align the tip of the wire with the thru-hole of the MicroTee and gently insert the wire until it bottoms out. Now finger tighten the female nut into place. Attach your flow path tubing to the MicroTee’s two other available ports, following the instructions provided with the MicroTee.Begin fluid flow through the tee and apply voltage to the conducting wire lead. This setup typically provides effective electrospray ionization in applications having a flow rate of 100 µL/min or greater.1 One such paper describing pioneering electrospray work: Protein Identification at the Low Femtomole Level from Silver-Stained Gels Using a New Fritless Electrospray Interface for Liquid Chromatography-Microspray and Nanospray Mass Spectrometry. Christine L. Gatlin, Gerd R. Kleemann, Lara G. Hays, Andrew J. Link, John R. Yates III (1998) Analytical Biochemistry 263, 93-101. Application NotePart No. Description Threads Includes Thru-hole Swept Volume Pressure Rating PriceMICROTEE, MICROCROSS AND MICROELBOWP-775 PEEK MicroTee for MicroTight Sleeves 5/16-24 Coned (3) F-172, (3) P-416 0.006” (0.150 mm) 29 nL 4,000 psi (276 bar) $ 103.08P-777 PEEK MicroCross for MicroTight Sleeves 5/16-24 Coned (4) F-172, (4) P-416 0.006” (0.150 mm) 38 nL 4,000 psi (276 bar) 117.77P-875 PEEK MicroTee with Mounting Hole, for MicroTight Sleeves 5/16-24 Coned (3) F-172, (3) P-416 0.006” (0.150 mm) 29 nL 4,000 psi (276 bar) 103.08P-885 PEEK MicroTee for 1/32” OD Tubing 5/16-24 Coned (3) F-112, (3) P-416 0.006” (0.150 mm) 29 nL 5,000 psi (345 bar) 103.08P-887 PEEK MicroCross for 1/32” OD Tubing 5/16-24 Coned (4) F-112, (4) P-416 0.006” (0.150 mm) 38 nL 5,000 psi (345 bar) 117.77P-888 PEEK MicroTee for 360 µm OD Tubing 5/16-24 Coned (3) F-152, (3) P-416BLK 0.006” (0.150 mm) 29 nL 5,000 psi (345 bar) 103.08P-889 PEEK MicroCross for 360 µm OD Tubing 5/16-24 Coned (4) F-152, (4) P-416BLK 0.006” (0.150 mm) 38 nL 5,000 psi (345 bar) 117.77P-890 PEEK MicroTee for 1/16” OD Tubing 5/16-24 Coned (3) F-132, (3) P-416 0.006” (0.150 mm) 58 nL 5,000 psi (345 bar) 103.08P-891 PEEK MicroCross for 1/16” OD Tubing 5/16-24 Coned (4) F-132, (4) P-416 0.006” (0.150 mm) 81 nL 5,000 psi (345 bar) 117.77P-888MicroTee for 360 µm OD tubing 0.006” thru-holes with fittings includedP-890MicroTee for 1/16” OD tubing 0.006” thru-holes with fittings included1.19” (3.02 cm)1.19” (3.02 cm)0.80” (2.03 cm)0.80” (2.03 cm)P-775MicroTee for MicroTight® Tubing Sleeves0.006” thru-holes with fittings included(tubing sleeves not included)P-887MicroCross for 1/32” OD tubing 0.006” thru-holes with fittings included1.19” (3.02 cm)0.80” (2.03 cm)1.19” (3.02 cm)1.19” (3.02 cm)Top Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com47ConnectorsTees and CrossesUpchurch Scientific® Tees and Crosses manufactured by IDEX Health & Science are available in two inert polymers and can handle pressures to 1,000 psi (69 bar). Each is designed with handy mounting holes. All ETFE Tees and Crosses ship complete with 1/4-28 PFA Flangeless nuts and ETFE ferrules, while their PEEK™ polymer counterparts ship with 1/4-28 PEEK nuts and ETFE ferrules. Replacement fittings are located on pages 25 and 26.P-152P-713 P-190P- 632P-723P-154Mounting Holes0.13” diameter (0.33 cm)1.08” (2.74 cm)0.37” (0.94 cm)P-632 & P-633ETFE Teescome with Flangeless Fittings0.49” (1.24 cm)1/4-28 threads0.38” (0.97 cm)0.13” diameter (0.33 cm)0.69” (1.75 cm)1.08” (2.74 cm)P-722PEEK Crosscomes with Flangeless FittingsPart No. Description Threads Includes: Thru-hole Swept Volume Pressure Rating PriceTEES AND CROSSESP-632 ETFE Tee for 1/16” OD Tubing 1/4-28 Flat-Bottom (3) P-245, (3) P-200N 0.020” (0.50 mm) 2.9 µL 1,000 psi (69 bar) $ 28.07P-633 ETFE Tee for 1/8” OD Tubing 1/4-28 Flat-Bottom (3) P-345, (3) P-300N 0.050” (1.25 mm) 17.5 µL 500 psi (34 bar) 28.07P-634 ETFE Cross for 1/16” OD Tubing 1/4-28 Flat-Bottom (4) P-245, (4) P-200N 0.020” (0.50 mm) 3.8 µL 1,000 psi (69 bar) 29.79P-635 ETFE Cross for 1/8” OD Tubing 1/4-28 Flat-Bottom (4) P-345, (4) P-300N 0.050” (1.25 mm) 22.8 µL 500 psi (34 bar) 29.79P-712 PEEK Tee for 1/16” OD Tubing 1/4-28 Flat-Bottom (3) XP-235 0.020” (0.50 mm) 2.9 µL 1,000 psi (69 bar) 29.79P-713 PEEK Tee for 1/8” OD Tubing 1/4-28 Flat-Bottom (3) XP-335 0.050” (1.25 mm) 17.5 µL 500 psi (34 bar) 29.79P-714 PEEK Tee for 1/16” OD Tubing 1/4-28 Flat-Bottom (3) XP-235 0.040” (1.00 mm) 11.4 µL 1,000 psi (69 bar) 29.79P-722 PEEK Cross for 1/16” OD Tubing 1/4-28 Flat-Bottom (4) XP-235 0.020” (0.50 mm) 3.8 µL 1,000 psi (69 bar) 37.13P-723 PEEK Cross for 1/8” OD Tubing 1/4-28 Flat-Bottom (4) XP-335 0.050” (1.25 mm) 22.8 µL 500 psi (34 bar) 37.13Low Pressure Tees and Crosses Seal off unused ports with any of our 1/4-28 flat-bottom plugs found on page 32. To use the PEEK polymer versions of our Tees and Crosses in higher pressure applications, simply replace the provided fittings with Super Flangeless™ Nuts and Ferrules, found on pages 21 – 23. High Pressure Tees, Crosses and a 7-Port Manifold (all with 10-32 threaded ports) are on page 43.Related Products To order just the body of one of our tees and crosses without fittings, simply add a ‘-01’ to the part number – e.g., P-632-01.NoteTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com48ConnectorsManifoldsChoose a 5, 6, 7 or 9 Port Manifold to combine several streams into one, or split one fluid stream into several. Each PEEK™ manifold comes complete with 1/4-28 Super Flangeless™ Fittings for either 1/16” or 1/8” OD tubing, with pressure ratings of 2,000 psi (138 bar) and 500 psi (34 bar), respectively.Bulkhead mountable 6-Port versions are available, and come with a stainless steel nut and lock washer to hold them in place. These manifolds have 1/2-20 external threads, requiring a 1/2” diameter hole to mount. The recommended torque limit while mounting these products is 15 in-lbs.A few useful applications include: Multiport mixing chamber Gas sparging splitting union Sample injection onto multi-well plates or a multiple direction flow path unionP-150PEEK 7-Port Manifoldcomes with Super Flangeless Fittings1.23” (3.12 cm)Top View0.13” diameter (0.33 cm)1.00” (2.54 cm)1.23” (3.12 cm)0.45” (1.14 cm)0.73” (1.85 cm)Side View1/4-28 threadsLow Pressure Manifolds and Y ConnectorsY ConnectorsUpchurch Scientific® PEEK Y Connectors are designed to split a stream or join two streams together, just like a tee. However, the configuration of a tee can lead to turbulent flow and solvent outgassing, which increases baseline noise and reduces sensitivity. The geometry of a Y connector creates much less turbulence and thus can improve analytical results.All of these Y Connectors use 1/4-28 Flangeless fittings, except P-515 which uses 5/16-24 fittings.Part No. Description Threads Includes Thru-hole Swept Volume Pressure Rating PriceMANIFOLDSStandardP-150 PEEK 7-Port Manifold for 1/16” OD Tubing 1/4-28 FB (7) P-255, (7) P-250 0.040” (1.00 mm) 42.0 µL 1,000 psi (69 bar) $ 89.42P-151 PEEK 7-Port Manifold for 1/8” OD Tubing 1/4-28 FB (7) P-331, (7) P-359 0.062” (1.60 mm) 83.0 µL 500 psi (34 bar) 89.42P-152 PEEK 6-Port Manifold for 1/16” OD Tubing 1/4-28 FB (6) P-255, (6) P-250 0.040” (1.00 mm) 26.8 µL 1,000 psi (69 bar) 83.69P-153 PEEK 6-Port Manifold for 1/8” OD Tubing 1/4-28 FB (6) P-331, (6) P-359 0.062” (1.60 mm) 62.3 µL 500 psi (34 bar) 83.69P-154 PEEK 5-Port Manifold for 1/16” OD Tubing 1/4-28 FB (5) P-255, (5) P-250 0.040” (1.00 mm) 22.3 µL 1,000 psi (69 bar) 76.83P-155 PEEK 5-Port Manifold for 1/8” OD Tubing 1/4-28 FB (5) P-331, (5) P-359 0.062” (1.60 mm) 53.8 µL 500 psi (34 bar) 76.83P-190 PEEK 9-Port Manifold for 1/8” OD Tubing 1/4-28 FB (9) P-331, (9) P-359 0.062” (1.60 mm) 160 µL 500 psi (34 bar) 119.28P-191 PEEK 9-Port Manifold for 1/16” OD Tubing 1/4-28 FB (9) P-255, (9) P-250 0.040” (1.00 mm) 139 µL 1,000 psi (69 bar) 119.28BulkheadP-156 PEEK 6-Port Manifold for 1/16” OD Tubing 1/4-28 FB (6) P-255, (6) P-250, (1) SST Nut and Lock Washer 0.040” (1.00 mm) 31.3 µL 1,000 psi (69 bar) $ 85.40P-157 PEEK 6-Port Manifold for 1/8” OD Tubing 1/4-28 FB (6) P-331, (6) P-359, (1) SST Nut and Lock Washer 0.062” (1.60 mm) 73.2 µL 500 psi (34 bar) 85.40Y CONNECTORSP-512 PEEK Y for 1/16" OD Tubing 1/4-28 FB (3) XP-235 0.020” (0.50 mm) 1.7 µL 1,000 psi (69 bar) $ 29.79P-513 PEEK Y for 1/8" OD Tubing 1/4-28 FB (3) XP-335 0.040” (1.00 mm) 6.0 µL 500 psi (34 bar) 29.79P-514 PEEK Y for 1/8" OD Tubing 1/4-28 FB (3) XP-335 0.060” (1.50 mm) 13.6 µL 500 psi (34 bar) 29.79P-515 PEEK Y for 3/16" OD Tubing 5/16-24 FB (3) XP-132 0.125” (3.20 mm) 47.7 µL 500 psi (34 bar) 29.79FB = Flat-Bottom0.39” (0.99 cm)0.50” (1.27 cm)1.00” (2.54 cm)1/4-28 threads0.13” diameter (0.33 cm)P-512PEEK Ycomes with Flangeless FittingsTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com49ConnectorsThreaded AdaptersEnglish Threaded AdaptersU-659Tapered thru-holeIncludes (1) U-650/U-655 for 1/4” OD tubing0.68” (1.73 cm) 1.0” (2.54 cm)1/2-205/16-240.68” (1.73 cm) 1.0” (2.54 cm)1/2-201/4-28U-6650.063” (1.60 mm) thru-holeIncludes (1) U-650/U-655 for 1/4” OD tubingP-6270.020” (0.50 mm) thru-holeIncludes (1) F-300 for 1/16” OD tubing0.92” (2.34 cm)0.37” (0.94 cm)10-321/4-280.79” (2.01 cm)0.28” (0.71 cm)10-321/4-2815830.040” (1.00 mm) thru-holeIncludes (1) U-400/U-401 for 1/16” OD tubingP-1350.080” (2.05 mm) thru-hole0.44” (1.12 cm) 0.79” (2.01 cm)5/16-241/4-28P-6810.125” (3.20 mm) thru-hole5/16-241/4-280.50” (1.27 cm) 0.83” (2.11 cm)P-6740.040” (1.00 mm) thru-hole5/16-241/4-280.50” (1.27 cm) 0.83” (2.11 cm)0.49” (1.24 cm) 0.85” (2.16 cm)1/4-285/16-24P-7180.040” (1.00 mm) thru-hole1.11” (2.82 cm)0.74” (1.88 cm)1/2-201/4-28P-6840.130” (3.30 mm) thru-hole0.31” (0.79 cm)1.20” (3.05 cm)10-325/16-246000-0760.066” (1.70 mm) thru-hole Please refer to our Connections Reference Chart on page 35 for assistance with choosing the right product for your needs. Use the Rheodyne® 6000-076 Adapter to connect 1/16” OD tubing to the Rheodyne Preparative-Scale Injector Valve (pages 131 – 133).Related ProductsPart No. Description Includes Thru-hole Swept Volume Pressure Rating PriceENGLISH THREADED ADAPTERS1583 SST Adapter, 10-32 C, F to 1/4-28 FB, F (1) U-400, (1) U-401 0.040” (1.00 mm) 0.60 µL * $ 27.486000-076 PEEK™ Adapter, 5/16-24 C, M to 10-32 C, F N/A 0.066" (1.70 mm) 49.8 µL 3,000 psi (207 bar) 35.89P-135 PEEK Adapter, 5/16-24 FB, F to 1/4-28 F N/A 0.080" (2.05 mm) 4.1 µL 1,000 psi (69 bar) 14.51P-627 PEEK Adapter, 10-32 C, F to 1/4-28 FB, F (1) F-300 0.020” (0.50 mm) 0.30 µL 1,000 psi (69 bar) 24.06P-649 PCTFE Adapter, 5/16-24 FB, F to 1/4-28 FB, M N/A 0.063" (1.60 mm) 24.5 µL 1,000 psi (69 bar) 20.63P-674 PCTFE Adapter, 5/16-24 FB, F to 1/4-28 FB, M N/A 0.040" (1.00 mm) 9.9 µL 1,000 psi (69 bar) 20.63P-681 PCTFE Adapter, 5/16-24 FB, F to 1/4-28 FB, M N/A 0.125" (3.20 mm) 96.6 µL 1,000 psi (69 bar) 20.63P-684 PCTFE Adapter, 1/2-20 FB, F to 1/4-28 FB, M N/A 0.130" (3.30 mm) 121.7 µL 250 psi (17 bar) 21.81P-718 PCTFE Adapter, 5/16-24 FB, M to 1/4-28 FB, F N/A 0.040" (1.00 mm) 10.3 µL 1,000 psi (69 bar) 20.63U-659 PEEK Adapter, 5/16-24 FB, F to 1/2-20 FB, F (1) XU-655 Tapered** 42.0 µL 250 psi (17 bar) 26.95U-665 PEEK Adapter, 1/2-20 FB, F to 1/4-28 FB, F (1) XU-655 0.063” (1.60 mm) 6.6 µL 250 psi (17 bar) 26.95F = Female (internal) threads; M = Male (external) threads; C = Coned; FB = Flat-Bottom* The pressure rating of this stainless steel adapter exceeds the pressure holding ability of the fittings and tubing used with it.** Thru-hole tapers from 0.188” (4.80 mm) to 0.125” (3.20 mm)Top Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com50ConnectorsEnglish Threaded AdaptersFemale to Male 10-32 to 1/4-28 AdaptersPart No. Description Includes Thru-hole Swept Volume Pressure Rating PriceENGLISH THREADED ADAPTERSP-652 PEEK™ Adapter, 1/4-28 FB, F to 10-32 C, M N/A 0.030” (0.75 mm) 6.7 µL 1,000 psi (69 bar) $ 13.66P-654 PEEK Adapter, 1/4-28 FB, F to 10-32 C, M, Extra Long N/A 0.030” (0.75 mm) 9.5 µL 1,000 psi (69 bar) 15.20P-669-01 PEEK Adapter, 10-32 C, F to 1/4-28 FB, M N/A 0.040” (1.00 mm) 6.6 µL 1,000 psi (69 bar) 20.63P-671 PTFE Adapter, 1/4-28 FB, F to 1/4-28 FB, M N/A 0.040” (1.00 mm) 8.0 µL 1,000 psi (69 bar) 20.63P-672 PEEK Adapter, 1/4-28 FB, F to 10-32 FB, M N/A 0.050” (1.25 mm) 11.4 µL 1,000 psi (69 bar) 20.63P-693 PTFE Adapter, 1/4-28 FB, F to 1/4-28 FB, M, Long N/A 0.040” (1.00 mm) 16.27 µL 1,000 psi (69 bar) 25.131591 SST Adapter, 10-32 C, F to 1/4-28 FB, M (1) U-400, (1) U-401 0.040” (1.00 mm) 6.0 µL * 21.05F = Female (internal) threads; M = Male (external) threads; XL = extra long; C = Coned; FB = Flat-Bottom* The pressure ratings of these adapters exceed the pressure holding ability of the fittings and tubing used with them.Threaded AdaptersHere are application ideas using two of our popular adapters: Many injection valves used in HPLC systems have 10-32 coned ports designed to accept 1/16” OD tubing. However, this may be a problem if large injection volumes are required (in excess of 10 mL). The most popular loops for large volume samples are made from 1/8” OD tubing, making it impossible to connect these larger volume loops to your injection valve. The solution: use our P-654 Adapter and the appropriate fittings for your sample loop. This set-up allows connection of 1/8” OD sample loop leads to your injection valve. Another potential application is connecting tubing to low-pressure solenoid valves with 1/4-28 flat-bottom ports. Most low-pressure valves of this type have very shallow threaded ports, which typically preclude the use of our Flangeless Fittings. However, by first threading our P-671 Adapter into the valve port(s), you can effectively use standard 1/4-28 fittings to connect your tubing into the backside of the adapter body. This also saves ”wear and tear” on the threads in the valve ports.Application Note When using an adapter with male (external) threads, we recommend you first attach the adapter body into the receiving port, and then connect your tubing and fitting into the head of the adapter body.NoteP-6720.050” (1.25 mm) thru-hole1/4-2810-320.70” (1.78 cm)0.37” (0.94 cm)P-6520.030” (0.75 mm) thru-holeNote the new knurled designP-669-010.040” (1.00 mm) thru-hole0.73” (1.85 cm)0.49” (1.24 cm)10-321/4-28P-6710.040” (1.00 mm) thru-hole1/4-280.37” (0.94 cm) 0.79” (2.01 cm)1/4-280.93” (2.36 cm)10-321/4-280.37” (0.94 cm)1.17 (2.97 cm)P-654Extra Long, 0.030” (0.76 mm) thru-hole10-321/4-280.37” (0.94 cm)10-321/4-280.73” (1.85 cm)0.34” (0.86 cm)1/4-281/4-281.14” (2.90 cm)0.37” (0.94 cm)15910.040” (1.00 mm) thru-holeIncludes (1) U-400 / U-401 for 1/16” OD tubingP-6930.040” (1.00 mm) thru-holeTop Seller SEE STARRED PRODUCTSRelated Products You may not need an adapter to connect 1/16” OD tubing into your flat-bottom port. A less expensive alternative is to use a Flangeless Nut and Ferrule starting on page 24 or a Super Flangeless™ Nut and Ferrule starting on page 21. Our Connections Reference chart on page 35 is also a good resource to consult when making connections.FOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com51ConnectorsThreaded Adapters0.79” (2.01 cm)0.31” (0.79 cm)M610-32Metric Threaded AdaptersFemale M6 AdaptersP-6730.040” (1.00 mm) thru-hole0.50” (1.27 cm) 0.85” (2.16 cm)0.49” (1.24 cm)M65/16-240.83” (2.11 cm)5/16-24M6P-7240.040” (1.00 mm) thru-hole1/4-28M60.50” (1.27 cm) 0.83” (2.11 cm)P-6700.030” (0.75 mm) thru-holeM61/4-280.49” (1.24 cm) 0.90” (2.27 cm)P-6940.040” (1.00 mm) thru-holeFemale to Male M6 Adapters10-32M60.37” (0.94 cm)0.92” (2.34 cm)P-6260.020” (0.50 mm) thru-holefor 1/16” OD tubing Includes (1) F-3000.93” (2.36 cm)0.37” (0.94 cm)10-321.17” (2.97 cm)0.37” (0.94 cm)10-32M6P-653Extra Long0.030” (0.75 mm) thru-holeP-6500.030” (0.75 mm) thru-holeM6Part No. Description Includes Thru-hole Swept Volume Pressure Rating PriceMETRIC M6 THREADED ADAPTERSFemale M6 AdaptersP-621 ETFE Adapter, 1/4-28 FB, F to M6 FB, F N/A N/A N/A 1,000 psi (69 bar) $ 4.88P-626 PEEK™ Adapter, 10-32 C, F to M6 FB, F (1) F-300 0.020” (0.50 mm) 0.3 µL 1,000 psi (69 bar) 24.061587 SST Adapter, 10-32 C, F to M6 FB, F (1) U-400, (1) U-401 0.040” (1.00 mm) 0.6 µL * 23.47Female to Male M6 AdaptersP-650 PEEK Adapter, M6 FB, F to 10-32 C, M Standard N/A 0.030” (0.75 mm) 6.7 µL 1,000 psi (69 bar) $ 13.66P-651 PEEK Adapter, M6 FB, F to 10-32 C, M Waters®-compatible N/A 0.030” (0.75 mm) 7.2 µL 1,000 psi (69 bar) 13.66P-653 PEEK Adapter, M6 FB, F to 10-32 C, M Extra Long N/A 0.030” (0.75 mm) 9.5 µL 1,000 psi (69 bar) 14.63P-670 PCTFE Adapter, M6 FB, F to 1/4-28 FB, M N/A 0.030” (0.75 mm) 2.6 µL 1,000 psi (69 bar) 20.63P-673 PCTFE Adapter, 5/16-24 FB, F to M6 FB, M N/A 0.040” (1.00 mm) 9.9 µL 1,000 psi (69 bar) 20.63P-694 PCTFE Adapter, 1/4-28 FB, F to M6 FB, M N/A 0.040” (1.00 mm) 11.3 µL 1,000 psi (69 bar) 20.63P-724 PCTFE Adapter, M6 FB, F to 5/16-24 FB, M N/A 0.040” (1.00 mm) 10.3 µL 1,000 psi (69 bar) 20.63P-920-01 PEEK Adapter, 10-32 C, F to M6 FB, M N/A 0.040” (1.00 mm) 8.0 µL 1,000 psi (69 bar) 20.63F = Female (internal) threads; M = Male (external) threads; C = Coned; FB = Flat-Bottom* The pressure rating of this adapter exceeds the pressure holding ability of the fittings and tubing used with it. For an alternative to the Female M6 Adapters presented in the left column of this page, try a P-602 or P-622 Low Pressure Metric Union from page 40, along with the appropriate Metric Flangeless Fittings on page 27. To direct connect your tubing into a flat-bottom port, find the appropriate Flangeless or Super Flangeless™ Fittings on pages 24 – 26 and 21 – 23 respectively. Need metric fittings for your connections? See page 27.Related Products0.82” (2.08 cm)0.37” (0.94 cm)1/4-28M6M610-320.73” (1.85 cm)0.49” (1.24 cm)P-920-010.040” (1.00 mm) thru-holeP-62115870.040” (1.00 mm) thru-holefor 1/16” OD tubing Includes (1) U-400 / U-401 Top Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com52ConnectorsExternal National Pipe Thread AdaptersThese adapters make connections to female 1/8” and 1/4” National Pipe Thread (NPT) ports.Manufactured from PEEK™ polymer by IDEX Health & Science, Upchurch Scientific® NPT Adapters are durable and chemically resistant. We provide a variety of female threads, as well as a male threaded version, suitable for most low pressure applications.Please Note: Wrap the threads on the NPT side of these adapters with thread seal tape (plumber’s tape) to ensure a leak-free seal.U-5121/8” NPT to M6 Flat-Bottom Female Adapterfor 1/8” OD tubing Includes (1) P-300/P-307 Fittings0.56” (1.42 cm)0.70” (1.78 cm)U-5101/8” NPT to 1/4-28 Flat-Bottom Female Adapterfor 1/8” OD tubing Includes (1) XP-308 Fitting0.56” (1.42 cm)0.70” (1.78 cm)0.56” (1.42 cm)0.70” (1.78 cm)U-5031/4” NPT to 5/16-24 Flat-Bottom Female Adapterfor 1/8” OD tubing Includes (1) P-360/P-131 FittingsU-5011/4” NPT to 1/4-28 Flat-Bottom Male Adapter0.70” (1.78 cm)0.70” (1.78 cm)0.56” (1.42 cm)1.12” (2.84 cm)U-5141/8” NPT to 5/16-24 Flat-Bottom Female Adapterfor 3/16” OD tubing Includes (1) XP-132 Fitting0.56” (1.42 cm)Part No. Description Color Tubing OD Includes Thru-hole Swept Volume Pressure Rating Price1/8” MALE NPT ADAPTERSU-510 PEEK 1/8” NPT, M to 1/4-28 FB, F Adapter Red 1/8” (1) XP-308 0.062” (1.60 mm) 17.3 µL 500 psi (34 bar) $ 15.48U-511 PEEK 1/8” NPT, M to 1/4-28 FB, M Adapter Red N/A N/A 0.062” (1.60 mm) 40.2 µL 500 psi (34 bar) 9.75U-512 PEEK 1/8” NPT, M to M6 FB, F Adapter Black 1/8” (1) P-307, (1) P-300 0.062” (1.60 mm) 17.3 µL 500 psi (34 bar) 15.48U-513 PEEK 1/8” NPT, M to 5/16-24 FB, F Adapter Natural 1/8” (1) P-131, (1) P-360 0.062” (1.60 mm) 17.3 µL 500 psi (34 bar) 15.48U-514 PEEK 1/8” NPT, M to 5/16-24 FB, F Adapter Natural 3/16” (1) XP-132 0.125” (3.2 mm) 70.4 µL 500 psi (34 bar) 15.481/4” MALE NPT ADAPTERSU-500 PEEK 1/4” NPT, M to 1/4-28 FB, F Adapter Red 1/8” (1) XP-308 0.062” (1.60 mm) 17.3 µL 500 psi (34 bar) $ 15.48U-501 PEEK 1/4” NPT, M to 1/4-28 FB, M Adapter Red N/A N/A 0.062” (1.60 mm) 40.2 µL 500 psi (34 bar) 9.75U-502 PEEK 1/4” NPT, M to M6 FB, F Adapter Black 1/8” (1) P-307, (1) P-300 0.062” (1.60 mm) 17.3 µL 500 psi (34 bar) 15.48U-503 PEEK 1/4” NPT, M to 5/16-24 FB, F Adapter Natural 1/8” (1) P-131, (1) P-360 0.062” (1.60 mm) 17.3 µL 500 psi (34 bar) 15.48U-504 PEEK 1/4” NPT, M to 5/16-24 FB, F Adapter Natural 3/16” (1) XP-132 0.125” (3.2 mm) 70.4 µL 500 psi (34 bar) 15.48F = Female (internal) threads; M = Male (external) threads; FB = Flat-BottomThreaded AdaptersOur U-500 and U-510 NPT Adapters are great for attaching 1/8” OD fluoropolymer sparging lines to sparging gas tank regulating valves. Simply thread the appropriately-sized NPT Adapter into the valve’s receiving port and then attach your sparging tubing to the adapter body using the fittings provided.Application NoteReplacement fittings for these adapters are located on the pages indicated below:Page(s)1/4-28 for 1/8” OD tubing 26M6 for 1/8” OD tubing 26, 275/16-24 for 1/8” OD tubing 23, 305/16-24 for 3/16” OD tubing 30Other tubing/fitting combinations are available. For more information, please contact your local Distributor or IDEX Health & Science directly.Related ProductsTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com53ConnectorsMicroTight® AdaptersMicroTight Adapters Convenient adapters for common 1/16” OD to capillary tubing Direct connect to 1/32” OD or 360 µm OD tubing options available VHP adapter pressure rated to 12,000 psi (828 bar)Create a true zero dead volume (ZDV) connection between 1/16” OD tubing and capillary tubing with these Upchurch Scientific®MicroTight Adapters. For Very High Pressure applications – the UH-630 will connect 1/16” OD to 1/32” OD tubing in an inline true ZDV connection with the ability to withstand 12,000 psi (828 bar) The materials of construction also allow this product to be used up to 200 ºC, which reduces the pressure rating to 8,000 psi (552 bar). For more information on the fittings used with the VHP adapter, please see page 9.Part No. Description Threads Includes Color Swept Volume Pressure Rating PriceMICROTIGHT ADAPTERSP-770 PEEK™ Micro Adapter, True ZDV, for 1/16” OD Tubing to MicroTight Tubing Sleeve10-32 C to 6-32 C (1) F-120, (1) F-125, (1) P-554 Natural N/A 4,000 psi (276 bar) $ 33.12P-881 PEEK Micro Adapter, True ZDV, for 1/16” to 1/32” OD Tubing 10-32 C to 6-32 C (1) F-120R, (1) F-126S, (1) P-554 Red N/A 5,000 psi (345 bar) 33.12P-882 PEEK Micro Adapter, True ZDV, for 1/16” to 360 µm OD Tubing 10-32 C to 6-32 C (1) F-120B, (1) F-124S, (1) P-554 Blue N/A 5,000 psi (345 bar) 33.12UH-630 Stainless Steel VHP Micro Adapter, for 1/16” to 1/32” OD Tubing 10-32 C to 6-32 C (1) PK-120BLK, (1) PK-126, (1) P-554 SST/Black N/A 12,000 psi (827 bar) 49.65REPLACEMENT GAUGE PLUGS (TO ACHIEVE TRUE ZDV CONNECTIONS WITH THE ABOVE ADAPTERS)P-554 Delrin® Gauge Plug 10-32 C White N/A N/A $ 5.90C = ConedP-770MicroTight ZDV Adapterfor 1/16” OD to MicroTight Sleeves with fittings included0.25” (0.64 cm)10-326-320.76” (1.93 cm)P-882MicroTight ZDV Adapterfor 1/16” to 360 µm OD tubing with fittings includedP-881MicroTight ZDV Adapterfor 1/16” to 1/32” OD tubing with fittings included1.51” (3.84 cm)0.37” (0.94 cm)UH-630VHP MicroTight Adapterfor 1/16” and 1/32” OD tubing with fittings includedTop Seller SEE STARRED PRODUCTSRelated Products Replacement 6-32 fittings are on page 55. Replacement F-120 style nuts are on page 11 (when ordering, replace the “x” with an “R” or “B” to order either red or blue fittings). Use this list to find micro flow products outside this chapter.Page360 µm, 510 µm (0.020”) and 1/32” OD PEEK Tubing 65360 µm OD Fused Silica Tubing 651/16” and 1/32” OD PEEKsil™ Tubing 661/32” OD FEP Tubing 71360 µm OD High Purity PFA Tubing 72510 µm (0.020”) and 1/32” OD Stainless Steel Tubing 68Polymer Capillary and Fused Silica Tubing Cutters 74Rheodyne® MX Series II™ Micro-Scale Injector and Switching Valves 126Rheodyne Manual Micro-Scale Injectors 129Micro Injection Port Adapters 140Micro-Splitter Valves 146Micro-Metering Valves 147Microbore Guard Column 184Ultra-Low Volume Back-Pressure Regulators 154Nonmetallic 10-32 Micro-Volume Inline Check Valve 149Ismatec® Peristaltic Tubing Pumps 94Use only the style of 6-32 threaded fitting supplied with each adapter — they are not interchangeable.NoteFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com54ConnectorsNanoPort™ AssembliesNanoPort Assemblies For lab-on-a-chip applications Options to connect 360 µm, MicroTight® tubing sleeves, 1/32” OD or 1/16” OD tubing Wetted materials: PEEK™ and perfluoroelastomerUpchurch Scientific® NanoPort Assemblies are the first commercially available products to provide consistent fluid connections for chip-based analyses. Once attached, NanoPort connections can withstand pressures to 1,000 psi (69 bar).* NanoPorts will adhere to silicon, quartz, glass and some polymers.All NanoPort components are made of inert, biocompatible PEEK polymer (nuts and ports) and Perlast® perfluoroelastomer (ferrules and gaskets). These products bond easily to chip surfaces with the provided Preformed Adhesive Rings (see Application Note on the following page). Their unique design also prevents adhesive contamination of the fluid path. And NanoPort connections add no additional volume to the fluid path, virtually eliminating dead volume traditionally associated with chip-based fluid connections. Our NanoPort Reservoir Assembly is designed for open well applications, such as CE.*Except the N-333 NanoPort Assembly, which is rated to 500 psi (34.5 bar).6-32 Flat-Bottom AssembliesTubing(not included)6-32 FB2-Piece FittingFerrule6-32 FB NanoPortGasket0.25” (6.4 mm)0.28” (7.1 mm)0.33” (8.4 mm)6-32 Coned Assemblies0.33” (8.4 mm)0.25” (6.4 mm)0.38” (9.7 mm) 6-32 ConedNanoPortsTubing(not included)6-32 Coned1-Piece FittingGasket10-32 Flat-Bottom Assemblies0.25” (6.4 mm)0.33” (8.4 mm)10-32 FB2-Piece FittingTubing(not included)Ferrule10-32 FB NanoPortGasket0.25” (6.4 mm)10-32 Coned Assembly0.25” (6.4 mm)0.33” (8.4 mm)0.38” (9.7 mm)Tubing(not included)10-32 FB2-Piece Fitting10-32 ConedNanoPortGasketReservoir Assembly0.37” (9.5 mm)0.33” (8.4 mm)0.38” (9.7 mm)10-32/1/4-28Insert0.30” (7.6 mm)1/4-28 FBNanoPort0.20” (5.1 mm)GasketNanoPort Adhesive Cure Requirements Preformed Adhesive Rings (included with each orderCure Temperature Cure Time165 – 177 ºC (330 – 350 ºF) 1 hour Place clamped Ports in oven at a temperature of 165 – 177 ºC (330 – 350 ºF) for one hour to develop a complete bond between the Port and the substrate. Please contact us regarding adherence to specific polymer substrates and other adhesive options.Please Note: For alternative epoxy adhesive options, please contact IDEX Health & Science directly. NanoPort Reservoir Applications Sample reservoir Open wells for capillary electrophoresis Syringe injection or flushing/priming, using our P-604 Luer Adapter, page 56, and luer syringe (such as our B-310) on page 155Application NoteFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com55ConnectorsPart No. Nut Ferrule For Chip Hole (dia. x depth) For Tubing OD Qty. PriceNANOPORT ASSEMBLIES6-32 Flat-Bottom NanoPort AssembliesN-121H F-123H N-123-04 0.04” x 0.04” (1.0 mm x 1.0 mm) 360 µm ea. $ 37.93N-121S F-123S N-123-04 0.04” x 0.04” (1.0 mm x 1.0 mm) 360 µm ea. 37.93N-122H F-123H N-123-05 0.04” x 0.06” (1.0 mm x 1.5 mm) 360 µm ea. 37.93N-122S F-123S N-123-05 0.04” x 0.06” (1.0 mm x 1.5 mm) 360 µm ea. 37.93N-123H F-123H N-123-03 0.04” (1.0 mm) dia. or less 360 µm ea. 36.71N-123S F-123S N-123-03 0.04” (1.0 mm) dia. or less 360 µm ea. 36.716-32 Coned NanoPort AssembliesN-124H F-124H None Up to 0.063” (1.6 mm) 360 µm ea. $ 17.42N-124S F-124S None Up to 0.063” (1.6 mm) 360 µm ea. 17.42N-125H F-125H None Up to 0.063” (1.6 mm) 70 – 520 µm1 ea. 17.42N-125S F-125 None Up to 0.063” (1.6 mm) 70 – 520 µm1 ea. 17.42N-126H F-126H None Up to 0.063” (1.6 mm) 1/32” ea. 17.42N-126S F-126S None Up to 0.063” (1.6 mm) 1/32” ea. 17.4210-32 Flat-Bottom NanoPort AssembliesN-129H F-122H N-123-04 0.04” x 0.04” (1.0 mm x 1.0 mm) 360 µm ea. $ 37.9310-32 Coned NanoPort AssemblyN-333 F-333N F-142N Up to 0.063” (1.6 mm) 1/16” ea. $ 20.46NanoPort Reservoir AssemblyN-131 80 µL Reservoir with Insert ea. $ 11.79NANOPORT REPLACEMENT PARTSPart No. Description Threads For Chip Hole Tubing OD Qty. PriceFittingsF-121Hx Headless Nuts 10-32 FB N/A 360 µm 10-pk $ 61.57F-122Hx Headless Nuts 10-32 FB N/A 360 µm 10-pk 61.57F-123Hx Headless Nuts 6-32 FB N/A 360 µm 10-pk 61.57F-123Sx Standard Head Nuts 6-32 FB N/A 360 µm 10-pk 61.57F-124Hx Headless Fittings 6-32 C N/A 360 µm 10-pk 61.57F-124Sx Standard Head Fittings 6-32 C N/A 360 µm 10-pk 61.57F-125Hx Headless Fittings 6-32 C N/A 70 – 520 µm1 10-pk 61.57F-125x Standard Head Fittings 6-32 C N/A 70 – 520 µm1 10-pk 61.57F-126Hx Headless Fittings 6-32 C N/A 1/32” 10-pk 61.57F-126Sx Standard Head Fittings 6-32 C N/A 1/32” 10-pk 61.57F-333Nx Headless Fittings 10-32 C Up to 0.063” (1.6 mm) 1/16” 10-pk 51.59F-142Nx Ferrules 10-32 C Up to 0.063” (1.6 mm) 1/16” 10-pk 38.28N-123-03x Ferrules 6-32 FB 0.04” (1.0 mm) dia. or less 360 µm 10-pk 286.55N-123-04x Ferrules 6-32, 10-32 FB 0.04” x 0.04” (1.0 mm x 1.0 mm) 360 µm 10-pk 304.39N-123-05x Ferrules 6-32 FB 0.04” x 0.06” (1.0 mm x 1.5 mm) 360 µm 10-pk 286.55GasketsN-123-02 Gasket, For all assemblies except 6-32 Coned Assemblies N/A N/A ea. $ 7.23N-124-02 Gasket, For 6-32 Coned Assemblies N/A N/A ea. 3.75Adhesives and ClampN-006 Clamp N/A N/A ea. $ 0.20N-100-01 Preformed Adhesive Rings N/A N/A 2-pk 1.981 Designed to use our MicroTight® Tubing Sleeves (page 19) to connect tubing OD sizes from 70–520 µm Abbreviation Definitions: FB = Flat-Bottom; C = Coned; N/A = Not ApplicableNanoPort Assemblies (cont.)NanoPort™ AssembliesTo select the appropriate NanoPort assembly you will need to consider: Size of tubing you are connecting Dimensions of the chip hole Fitting style (one-piece or two-piece fittings) Nut head style (standard or headless nut)Please Note: Each NanoPort Assembly includes a fitting (one- or two-piece), a NanoPort, gasket, a 2-pack of preformed adhesive rings, and a clamp for holding the port in place while the adhesive cures.NoteTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com56ConnectorsP-657, P-677Male Luer to M6 Female0.44” (1.12 cm)0.91” (2.31 cm)P-655, P-675Male Luer to 1/4-28 FemaleP-605, P-619, P-625Male Luer to 1/4-28 Male0.93” (2.36 cm)0.47” (1.19 cm)P-604, P-618, P-624Female Luer to 1/4-28 Male(luer end of P-604 different than shown)0.82” (2.08 cm)0.46” (1.17 cm)P-628Female Luer to 1/4-28 Female0.78” (1.98 cm)0.41” (1.04 cm)P-656Male Luer to 10-32 Female 0.42” (1.07 cm)0.98” (2.49 cm)P-642Female Luer to 10-32 Male0.75” (1.91 cm)0.41” (1.04 cm)P-629, P-629BLKFemale Luer to 10-32 Female0.78” (1.98 cm)0.40” (1.02 cm)Quick Connect Luer Adapters Delrin®, polypropylene, ETFE or PEEK™ Versions Adapts luers to 1/4-28, 10-32, 5/16-24 or M6 threaded portsThese luer adapters were designed to work in a variety of applications. By connecting any male luer to any female luer, you can create your own quick connect union or adapter. Each Upchurch Scientific® Quick Connect Luer Adapter conforms to ISO requirements for medical luer taper configuration and performance (45 psi/3.1 bar).Find fittings to connect tubing to the threaded ports of these adapters in the Fittings chapter, starting on page 4.Please Note: Our Female Quick Connect Luer Adapters can be used with any of the Male Luers on this page, i.e., those with and without lock hubs.P-659Female Luer to 10-32 FemaleP-660, P-680Female Luer to M6 FemaleP-658, P-678Female Luer to 1/4-28 Female0.37” (0.94 cm)0.75” (1.91 cm)P-661Female Luer to 5/16-24 Male0.81” (2.06 cm)0.46” (1.17 cm)P-683Male Luer to 1/4-28 Male1.14” (2.90 cm)0.47” (1.19 cm)P-686Female Luer to M6 Male0.82” (2.08 cm)0.46” (1.17 cm)Luer Adapters Our A-626 Bottle Cap Plug (page 172) can be used to plug any of the female luer adapters on this page. To prevent a chemical spill when disconnecting your solvent reservoir tubing from the pump, try our Quick-Stop Luer Check Valve on page 151. To economically prime an HPLC pump, simply remove the 10-32 fitting on the outlet check valve (standard on most models), insert a P-642 luer adapter, attach a syringe (such as our B-310) and draw the mobile phase through the pumphead.Application NotePart No. DescriptionBodyMaterialLock HubMaterial Thru-hole PriceQUICK CONNECT LUER ADAPTERSP-604 F Luer to 1/4-28 FB, M Nat. Delrin N/A 0.05” (1.3 mm) $ 2.73P-605 M Luer to 1/4-28 FB, M Nat. Delrin None * 0.05” (1.3 mm) 2.73P-618 F Luer to 1/4-28 FB, M Nat. PP N/A 0.05” (1.3 mm) 2.73P-619 M Luer to 1/4-28 FB, M Nat. PP None * 0.05” (1.3 mm) 2.73P-624 F Luer to 1/4-28 FB, M Nat. ETFE N/A 0.05” (1.3 mm) 3.59P-625 M Luer to 1/4-28 FB, M Nat. ETFE None * 0.04” (1.0 mm) 3.59P-628 F Luer to 1/4-28 FB, F Nat. ETFE N/A 0.04” (1.0 mm) 3.59P-629 F Luer to 10-32 C, F Nat. ETFE N/A 0.04” (1.0 mm) 3.59P-629BLK F Luer to 10-32 C, F Black ETFE N/A 0.04” (1.0 mm) 3.59P-642 F Luer to 10-32 C, M Nat. ETFE N/A 0.05” (1.3 mm) 3.59P-655 M Luer to 1/4-28 FB, F Red PEEK Black PEEK 0.04” (1.3 mm) 12.75P-656 M Luer to 10-32 C, F Nat. PEEK Black PEEK 0.05” (1.3 mm) 12.75P-657 M Luer to M6 FB, F Black PEEK Black PEEK 0.05” (1.3 mm) 12.75P-658 F Luer to 1/4-28 FB, F Red PEEK N/A 0.05” (1.3 mm) 11.94P-659 F Luer to 10-32 C, F Nat. PEEK N/A 0.05” (1.3 mm) 11.94P-660 F Luer to M6 FB, F Black PEEK N/A 0.05” (1.3 mm) 11.94P-661 F Luer to 5/16-24 FB, M Nat. ETFE N/A 0.05” (1.3 mm) 4.01P-675 M Luer to 1/4-28 FB, F Red ETFE Natural PP 0.05” (1.3 mm) 8.73P-677 M Luer to M6 FB, F Black ETFE Natural PP 0.05” (1.3 mm) 8.73P-678 F Luer to 1/4-28 FB, F Red ETFE N/A 0.05” (1.3 mm) 6.86P-680 F Luer to M6 FB, F Black ETFE N/A 0.05” (1.3 mm) 6.86P-683 M Luer to 1/4-28 FB, M Nat. PEEK Black PEEK 0.04” (1.0 mm) 18.00P-686 F Luer to M6 FB, M Black ETFE N/A 0.05” (1.3 mm) 3.59SYRINGE WITH MALE LUER LOCKB-310 10cc Disposable Luer-Lock Syringe For use with any Female Luer Adapter0.05” (1.3 mm) $ 0.63F = Female (internal) threads; M = Male (external) threads; Nat. = Natural; N/A = Not Applicable; PP = Polypropylene; FB = Flat-Bottom; C = Coned* Slip-type male luerTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com57ConnectorsP-662Luer-To-MicroTight Adapterfor Luer to 360 µm OD tubing with fittings included0.75” (1.91 cm)0.44” (1.12 cm)Luer-To-MicroTight® Adapter Easily connect 360 µm OD tubing to a syringeThe Upchurch Scientific Luer-to-Microtight Adapter is ideal for infusing sample into lab-on-a-chip devices. This product is made entirely of biocompatible PEEK™ polymer and introduces only 14 nL of additional volume to the flow path. Use it to directly connect a luer-tip syringe or other product that terminates with a standard male luer to 360 µm OD capillary tubing without tubing sleeves (see photo). MicroTight Fittings are included.P-662 Luer-to-MicroTight Adapter, shown with a B-310 Syringe (page 155) and PEEK capillary tubing (page 65), not included.Luer AdaptersPart No. Description Includes Thru-hole Pressure Rating PriceLUERTIGHT FITTINGS SYSTEMSP-837 LuerTight System for 1/16” OD Tubing (1) P-835, (1) P-836, (1) P-830T N/A 100 psi (7 bar) $ 13.19P-838 LuerTight System for 1/8” OD Tubing (1) P-830, (1) P-831, (1) P-830T N/A 100 psi (7 bar) 13.19LUERTIGHT FITTING COMPONENTSP-830 Female Fitting for 1/8” OD Tubing (1) Ferrule N/A N/A $ 3.43P-830T Set Plug to swage Ferrules into P-835 and P-830 N/A N/A N/A 6.86P-831 Male Fitting for 1/8” OD Tubing No Ferrule Required N/A N/A 3.43P-835 Female Fitting for 1/16” OD Tubing (1) Ferrule N/A N/A 3.43P-836 Male Fitting for 1/16” OD Tubing (1) Ferrule N/A N/A 3.43LUER-TO-MICROTIGHT ADAPTERP-662 Luer-to-MicroTight Adapter (1) F-152, (1) P-416 0.006” (0.150 mm) 45 psi (2.4 bar) $ 41.69Female = internal receiving luer pocket; Male = external luer nose (surrounded by internally-threaded locking ring)P-837LuerTight Fittings Systemfor 1/16” OD tubingP-836 P-835Tubing (not included)Ferrules (included)P-838LuerTight Fittings Systemfor 1/8” OD tubingP-831 P-830Tubing (not included)1.06” (2.69 cm)0.50” (1.27 cm)Ferrule (included)Order Online WWW. IDEX-HS.COMLuerTight™ Fittings Luer fittings for fluoropolymer tubing Quick disconnect and barbless For 1/16” and 1/8” OD tubingUpchurch Scientific® LuerTight fittings are specifically designed to connect fluoropolymer tubing without barbs or nuts By integrating ferrules into the luer bodies, LuerTights will reliably hold your tubing in place while giving you the convenience of a luer connection. An inline set of LuerTight fittings provides a quick and easy disconnection option. LuerTight connections are also less bulky and more economical than nut-to-luer style fittings.The bodies of these products are manufactured from polypropylene and the ferrules, where used, are made of ETFE.Top Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com58ConnectorsBarbed AdaptersSwivel Barb Adapters Barb connection spins freely from the nut to prevent twist during installation Manufactured from polypropyleneThe new Swivel Barb Adapters from Upchurch Scientific® are made up of two captive pieces acting as a one-piece fitting for ease of use. Manufactured from Polypropylene and available in three barb sizes, the Swivel Barb will facilitate connection between flexible tubing to a 1/4-28 flat-bottom port. The barbed insert spins freely from the threaded nut in order to prevent the tubing from twisting during installation.Barbed Adapters Three barb sizes, for 1/16”, 1/8” and 3/16” ID flexible tubing Adapt to 1/4-28 flat-bottom, 5/16-24 flat-bottom or 10-32 coned receiving portsThese Upchurch Scientific adapters make it easy to connect flexible tubing to any standard 1/4-28 flat-bottom or 10-32 coned receiving port. Simply thread the adapter into a receiving port and slip tubing over the barbed stem to create a reliable low pressure connection.Part No. Description Material Threads Thru-hole PriceSWIVEL BARB ADAPTERSD-646 Swivel Barb Adapter, 1/16” (1.55 mm) ID Tubing Polypropylene 1/4-28 Flat-Bottom 0.03” (0.75 mm) $ 6.15D-647 Swivel Barb Adapter, 3/32” (2.40 mm) ID Tubing Polypropylene 1/4-28 Flat-Bottom 0.06” (1.5 mm) 6.15D-648 Swivel Barb Adapter, 1/8” (3.20 mm) ID Tubing Polypropylene 1/4-28 Flat-Bottom 0.08” (2.0 mm) 6.15BARBED ADAPTERSP-663 Barb Adapter, 1/16” (1.55 mm) ID Tubing ETFE 10-32 Coned 0.04” (1.0 mm) $ 3.59P-664 Barb Adapter, 1/8” (3.20 mm) ID Tubing ETFE 10-32 Coned 0.04” (1.0 mm) 3.59P-646 Barb Adapter, 1/16” (1.55 mm) ID Tubing ETFE 1/4-28 Flat-Bottom 0.04” (1.0 mm) 3.59P-647 Barb Adapter, 1/8” (3.20 mm) ID Tubing ETFE 1/4-28 Flat-Bottom 0.08” (2.0 mm) 3.59P-648 Barb Adapter, 3/16” (4.75 mm) ID Tubing ETFE 1/4-28 Flat-Bottom 0.10” (2.5 mm) 3.59P-668 Barb Adapter, 1/16” (1.55 mm) ID Tubing PEEK™ 1/4-28 Flat-Bottom 0.04” (1.0 mm) 8.63P-689 Barb Adapter, 3/16” (4.75 mm) ID Tubing ETFE 5/16-24 Flat-Bottom 0.10” (2.5 mm) 25.56P-692 Barb Adapter, 0.020” to 1/32” (0.50 to 0.80 mm) ID Tubing PEEK 1/4-28 Flat-Bottom 0.02” (0.5 mm) 9.32D-6461/4-28 to 1/16” ID tubing0.90” (2.29 cm)D-6471/4-28 to 3/32” ID tubing0.90” (2.29 cm)D-6481/4-28 to 1/8” ID tubing0.90” (2.29 cm)P-6471/4-28 to 1/8” ID tubing0.99” (2.51 cm)0.47” (1.19 cm)P-6461/4-28 to 1/16” ID tubing0.88” (2.24 cm)0.47” (1.19 cm)P-66310-32 to 1/16” ID tubing0.86” (2.18 cm)0.44” (1.12 cm)P-6895/16-24 to 3/16” ID tubing1.27” (3.23 cm)0.47” (1.19 cm)P-6681/4-28 to 1/16” ID tubing0.88” (2.24 cm)0.47” (1.19 cm)P-6481/4-28 to 3/16” ID tubing01.21” (3.07 cm)0.47” (1.19 cm)P-66410-32 to 1/8” ID tubing0.44” (1.12 cm)0.96” (2.44 cm)P-6921/4-28 to 0.020” – 1/32”ID tubing0.90” (2.29 cm)0.37” (0.94 cm) To connect low pressure fluoropolymer tubing, try the LuerTight™ Adapters on page 57. To connect peristaltic tubing to low pressure fluoropolymer tubing, see page 61. For peristaltic tubing, see pages 75 – 89.Related ProductsTop Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com59ConnectorsBarbed AdaptersUse these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec®Peristaltic Pumps (listed on pages 92 – 108).The polypropylene used to manufacture the majority of these products is a Class VI material. Due to the low melt point of polypropylene (PP), these adapters are not autoclavable, however, they can be sterilized via gamma radiation. There are also Barb to Female Luer-Lock connectors available from ETFE, which has superior solvent resistance and a higher temperature rating (80 ºC).CFEABBarb to Male Luer with Lock Ring AdaptersBarbed Union ConnectorsCABBCEDBCEFACC“Y” Barbed ConnectorsACFDEHBBarb to Slip-Type Male Luer AdaptersFDECABBarb to Female Luer-Lock ConnectorsD GBEACHIBarbed Reducing AdaptersBarbed AdaptersPart No. Description Material PriceBARB TO SLIP-TYPE MALE LUER ADAPTERS (10-pk)P-854x Male Luers (Slip-type) for use with 1/16” ID (1.55 mm) TubingA=0.046” B=0.064” C=0.090” D=0.129” E=0.711” F=0.198” H=0.384”PP $ 7.61P-855x Male Luers (Slip-type) for use with 3/32" ID (2.40 mm) TubingA=0.069” B=0.097” C=0.138” D=0.128” E=0.803” F=0.290” H=0.385”PP 7.61P-856x Male Luers (Slip-type) for use with 1/8” ID (3.20 mm) TubingA=0.096” B=0.129” C=0.182” D=0.129” E=0.889” F=0.383” H=0.377”PP 7.61These slip-type male luer fittings are for use in systems for which luer lock rings are not desired.BARB TO MALE LUER WITH LOCK RING ADAPTERS (10-pk)P-850x Male Luers with Lock Ring for use with 1/16” ID (1.55 mm) TubingA=0.049” B=0.065” C=0.090” E=0.583” F=0.434”PP $ 7.61P-851x Male Luers with Lock Ring for use with 3/32” ID (2.40 mm) TubingA=0.071” B=0.100” C=0.139” E=0.681” F=0.436”PP 7.61P-852x Male Luers with Lock Ring for use with 1/8” ID (3.20 mm) TubingA=0.099” B=0.132” C=0.184” E=0.777” F=0.436”PP 7.61P-853x Male Luers with Lock Ring for use with 5/32” ID (4.00 mm) TubingA=0.108” B=0.164” C=0.231” E=0.874” F=0.436”PP 7.61BARB TO FEMALE LUER-LOCK CONNECTORS (10-pk)P-857x Female Luer Connectors for use with 1/16” ID (1.55 mm) TubingA=0.030” B=0.063” C=0.106” D=0.100” E=0.598” F=0.253”PP $ 7.61P-858x Female Luer Connectors for use with 3/32” ID (2.40 mm) TubingA=0.056” B=0.102” C=0.145” D=0.100” E=0.648” F=0.253”PP 7.61P-859x Female Luer Connectors for use with 1/8” ID (3.20 mm) TubingA=0.080” B=0.135” C=0.187” D=0.100” E=0.733” F=0.253”PP 7.61P-870 For use with 1/16” (1.55 mm) ID TubingA=0.030” B=0.063” C=0.106” D=0.100” E=0.598” F=0.253”ETFE 3.49P-871 For use with 3/32” (2.40 mm) ID TubingA=0.056” B=0.102” C=0.145” D=0.100” E=0.648” F=0.253”ETFE 3.49P-872 For use with 1/8” (3.20 mm) ID TubingA=0.080” B=0.137” C=0.187” D=0.100” E=0.733” F=0.253”ETFE 3.49BARBED UNION CONNECTORS (10-pk)P-801x Barbed Connectors to connect 1/16” ID (1.55 mm) Tubing to 1/16” ID (1.55 mm) TubingA=0.046” B=0.063” C=0.101” D=0.100” E=0.658”PP $ 4.71P-802x Barbed Connectors to connect 1/8” ID (3.20 mm) Tubing to 1/8” ID (3.20 mm) TubingA=0.085” B=0.126” C=0.182” D=0.098” E=0.791”PP 4.71P-803x Barbed Connectors to connect 3/16” ID (4.75 mm) Tubing to 3/16” ID (4.75 mm) TubingA=0.122” B=0.157” C=0.275” D=0.126” E=1.179”PP 4.71P-804x Barbed Connectors to connect 1/4” ID (6.35 mm) Tubing to 1/4” ID (6.35 mm) TubingA=0.185” B=0.247” C=0.342” D=0.163” E=1.279”PP 4.71P-805x Barbed Connectors to connect 3/8” ID (9.55 mm) Tubing to 3/8” ID (9.55 mm) TubingA=0.248” B=0.373” C=0.466” D=0.249” E=2.103”PP 4.71P-806x Barbed Connectors to connect 1/2” ID (12.7 mm) Tubing to 1/2” ID (12.7 mm) TubingA=0.390” B=0.496” C=0.598” D=0.249” E=2.047”PP 4.71BARBED REDUCING ADAPTERS (10-pk)P-807x Barbed Reducing Adapters to connect 1/8” ID (3.20 mm) Tubing to 1/16” ID (1.55 mm) TubingA=0.081” B=0.120” C=0.170” D=0.104” E=0.755” G=0.102” H=0.048” I=0.067”PP $ 4.71P-808x Barbed Reducing Adapters to connect 3/16” ID (4.75 mm) tubing to 1/8” ID (3.20 mm) tubingA=0.126” B=0.187” C=0.285” D=0.131” E=1.245”G=0.181” H=0.085” I=0.125”PP 4.71P-809x Barbed Reducing Adapters to connect 1/4” ID (6.35 mm) Tubing to 3/16” ID (4.75 mm) TubingA=0.139” B=0.209” C=0.355” D=0.125” E=1.561” G=0.270” H=0.139” I=0.184”PP 4.71P-810x Barbed Reducing Adapters to connect 3/8” ID (9.55 mm) Tubing to 1/4” ID (6.35 mm) TubingA=0.248” B=0.371” C=0.466” D=0.249” E=2.057” G=0.345” H=0.188” I=0.249”PP 4.71"Y" BARBED CONNECTORS (10-pk)P-860x "Y" Barbed Connectors for use with 1/16” ID (1.55 mm) TubingA=0.047” B=0.066” C=0.092” E=0.508” F=0.345”PP $ 13.77P-861x "Y" Barbed Connectors for use with 3/32” ID (2.40 mm) TubingA=0.070” B=0.099” C=0.137” E=0.757” F=0.521”PP 13.77P-862x "Y" Barbed Connectors for use with 1/8” ID (3.20 mm) TubingA=0.095” B=0.126” C=0.183” E=1.017” F=0.70”PP 13.77P-863x "Y" Barbed Connectors for use with 3/16” ID (4.75 mm) TubingA=0.157” B=0.197” C=0.280” E=1.470” F=1.051”PP 13.77P-864x "Y" Barbed Connectors for use with 1/4” ID (6.35 mm) TubingA=0.189” B=0.266” C=0.372” E=2.040” F=1.405”PP 13.77An “x” in the product part number designates “10-pk.”Top Seller SEE STARRED PRODUCTSFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com60ConnectorsBarbed Connectors Specifically designed for Ismatec® pump tubing Wide variety of unions, adapters and multi-port connectors in multiple material choicesThere are several Ismatec connectors for connecting multiple pieces of peristaltic tubing. Reference the tubing size of the barb in the tables below to select from unions (to connect same tubing size), reducers (to connect two different tubing sizes) in both straight, tee, Y, elbow and cross configurations. For very small peristaltic tubing, steel connectors are available to couple two pieces of the same size tubing together. Match the OD of the steel tubing connector to be slightly larger than the ID of the peristaltic tubing.Peristaltic Tube ConnectorsPart No. Tubing ID Material Qty. PriceSTANDARD TUBE CONNECTORS IN PLASTICType 1ISM556A 0.06” (1.5 mm) Acetal 10-pk $ 29.99ISM557A 0.10” (2.5 mm) Acetal 10-pk 29.99ISM558A 0.12” (3.0 mm) Polypropylene 10-pk 29.99ISM559 0.16” (4.0 mm) Polypropylene 10-pk 10.00ISM560 0.20” (5.0 mm) Polypropylene 10-pk 18.16ISM561 0.24” (6.0 mm) Polypropylene 10-pk 19.99ISM562 0.31” (8.0 mm) Polypropylene 10-pk 31.82ISM563 0.40” (10.0 mm) Polypropylene 10-pk 41.72ISM564 0.47” (12.0 mm) Polypropylene 10-pk 45.39ISM565 0.51” (13.0 mm) Polypropylene 10-pk 48.14ISM566 0.55” (14.0 mm) Polypropylene 10-pk 62.63ISM567 0.63” (16.0 mm) Polypropylene 10-pk 131.68ISM568 0.75” (19.0 mm) Polypropylene 10-pk 85.37Type 2ISM693A 0.06” (1.5 mm) Acetal 10-pk $ 16.43ISM694 0.10” (2.5 mm) Acetal 10-pk 20.91ISM510 0.12” (3.0 mm) Polypropylene 10-pk 19.99ISM511 0.16” (4.0 mm) Polypropylene 10-pk 26.32ISM512 0.20” (5.0 mm) Polypropylene 10-pk 32.64ISM513 0.24” (6.0 mm) Polypropylene 10-pk 40.90ISM514 0.28” (7.0 mm) Polypropylene 10-pk 41.72ISM515 0.31” (8.0 mm) Polypropylene 10-pk 42.64ISM516 0.40” (10.0 mm) Polypropylene 10-pk 53.55ISM517 0.47” (12.0 mm) Polypropylene 10-pk 63.55ISM518 0.51” (13.0 mm) Polypropylene 10-pk 68.14ISM519 0.55” (14.0 mm) Polypropylene 10-pk 139.84ISM520 0.59” (15.0 mm) Polypropylene 10-pk 98.02ISM521 0.63” (16.0 mm) Polypropylene 10-pk 114.34ISM522 0.75” (19.0 mm) Polypropylene 10-pk 125.26Type 3ISM524 0.12” (3.0 mm) Polypropylene 10-pk $ 29.07ISM525 0.16” (4.0 mm) Polypropylene 10-pk 26.32ISM526 0.20” (5.0 mm) Polypropylene 10-pk 36.31ISM527 0.24” (6.0 mm) Polypropylene 10-pk 37.23ISM528 0.31” (8.0 mm) Polypropylene 10-pk 57.22ISM529 0.40” (10.0 mm) Polypropylene 10-pk 55.39ISM530 0.47” (12.0 mm) Polypropylene 10-pk 68.14ISM531 0.51” (13.0 mm) Polypropylene 10-pk 74.46ISM532 0.55” (14.0 mm) Polypropylene 10-pk 86.29ISM533 0.63” (16.0 mm) Polypropylene 10-pk 104.45ISM534 0.75” (19.0 mm) Polypropylene 10-pk 111.69Part No. Tubing ID Material Qty. PriceSTANDARD TUBE CONNECTORS IN PLASTICType 4ISM507 0.10” (2.5 mm) Acetal 10-pk $ 41.72ISM493 0.12” (3.0 mm) Polypropylene 10-pk 19.07ISM494 0.16” (4.0 mm) Polypropylene 10-pk 21.83ISM495 0.20” (5.0 mm) Polypropylene 10-pk 29.99ISM496 0.24” (6.0 mm) Polypropylene 10-pk 33.56ISM497 0.31” (8.0 mm) Polypropylene 10-pk 42.64ISM498 0.40” (10.0 mm) Polypropylene 10-pk 63.55ISM499 0.47” (12.0 mm) Polypropylene 10-pk 78.95ISM500 0.51” (13.0 mm) Polypropylene 10-pk 68.14ISM501 0.55” (14.0 mm) Polypropylene 10-pk 82.62ISM502 0.59” (15.0 mm) Polypropylene 10-pk 98.02ISM503 0.63” (16.0 mm) Polypropylene 10-pk 111.69ISM523 0.75” (19.0 mm) Polypropylene 10-pk 125.26Type 5ISM535 0.16” (4.0 mm) Polypropylene 10-pk $ 35.39ISM536 0.20” (5.0 mm) Polypropylene 10-pk 42.64ISM537 0.24” (6.0 mm) Polypropylene 10-pk 51.71REDUCER TUBE CONNECTORS IN PLASTICPart No. Tubing ID Material Qty. PriceType 6 A BISM569A 0.06” (1.5 mm) 0.10” (2.5 mm) Acetal 10-pk $ 29.99ISM570A 0.06” (1.5 mm) 0.12” (3.0 mm) Acetal 10-pk 29.99ISM571A 0.10” (2.5 mm) 0.12” (3.0 mm) Acetal 10-pk 29.99ISM572 0.12” (3.0 mm) 0.16” (4.0 mm) Polypropylene 10-pk 26.32ISM573A 0.16” (4.0 mm) 0.24” (6.0 mm) Polypropylene 10-pk 28.15ISM574 0.16” (4.0 mm) 0.31” (8.0 mm) Polypropylene 10-pk 40.90ISM575 0.24” (6.0 mm) 0.31” (8.0 mm) Polypropylene 10-pk 46.31ISM576 0.24” (6.0 mm) 0.40” (10.0 mm) Polypropylene 10-pk 48.14ISM577 0.31” (8.0 mm) 0.40” (10.0 mm) Polypropylene 10-pk 48.14ISM578 0.31” (8.0 mm) 0.47” (12.0 mm) Polypropylene 10-pk 54.47ISM579 0.40” (10.0 mm) 0.47” (12.0 mm) Polypropylene 10-pk 54.47Type 7 A BISM538 0.12” (3.0 mm) 0.16” (4.0 mm) Polypropylene 10-pk $ 33.56ISM539 0.16” (4.0 mm) 0.24” (6.0 mm) Polypropylene 10-pk 34.48ISM540 0.24” (6.0 mm) 0.16” (4.0 mm) Polypropylene 10-pk 37.23ISM541 0.31” (8.0 mm) 0.16” (4.0 mm) Polypropylene 10-pk 42.64ISM542 0.31” (8.0 mm) 0.24” (6.0 mm) Polypropylene 10-pk 42.64ISM544 0.40” (10.0 mm) 0.24” (6.0 mm) Polypropylene 10-pk 53.55ISM545 0.40” (10.0 mm) 0.31” (8.0 mm) Polypropylene 10-pk 59.87ISM546 0.40” (10.0 mm) 0.51” (13.0 mm) Polypropylene 10-pk 63.55ISM547 0.47” (12.0 mm) 0.31” (8.0 mm) Polypropylene 10-pk 63.55ISM548 0.47” (12.0 mm) 0.40” (10.0 mm) Polypropylene 10-pk 63.55ISM549 0.59” (15.0 mm) 0.24” (6.0 mm) Polypropylene 10-pk 99.86Type 8 A BISM553 0.16” (4.0 mm) 0.24” (6.0 mm) Polypropylene 10-pk $ 36.31ISM554 0.24” (6.0 mm) 0.31” (8.0 mm) Polypropylene 10-pk 42.64STEEL 18/8 STANDARD TUBE CONNECTORSPart No. Tubing ID Tubing ODConnector Length Material Qty.ISM580 0.01” (0.30 mm) 0.02” (0.63 mm) 0.59” (15.0 mm) SST 6-pk $ 40.90ISM581 0.02” (0.58 mm) 0.04” (0.90 mm) 0.59” (15.0 mm) SST 6-pk 40.90ISM582 0.02” (0.58 mm) (0.04” 0.90 mm) 0.43” (11 mm) SST 6-pk 40.90ISM583 0.03” (0.84 mm) 0.05” (1.27 mm) 0.43” (11 mm) SST 6-pk 40.90ISM584 0.03” (0.84 mm) 0.05” (1.27 mm) 0.63” (16.0 mm) SST 6-pk 40.90ISM585A 0.01” (0.30 mm) 0.02” (0.63 mm) 0.98” (25 mm) SST 6-pk 40.90ISM586A 0.02” (0.58 mm) 0.04” (0.90 mm) 0.98” (25 mm) SST 6-pk 40.90ISM587 0.02” (0.58 mm) 0.04” (0.90 mm) 0.75” (19.0 mm) SST 6-pk 40.90AAAAAAAA AAA AAType 1 Type 2 Type 3 Type 4 Type 5Standard Tube Connectors in PlasticA BA ABAABType 6 Type 7 Type 8A AReducer Tube Connectors in Plastic Steel 18/8 Standard Tube ConnectorsFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com61ConnectorsConical Adapters Direct connect 1/16” and 1/8” OD rigid and semi-rigid tubing to peristaltic tubing Accept 0.020”– 1/8” (0.50 – 3.2 mm) ID peristaltic tubing Biocompatible flowpath with excellent chemical compatibilityUpchurch Scientific® Conical Adapters manufactured by IDEX Health & Science provide a reliable connection between rigid/semi-rigid tubing and peristaltic-type flexible tubing, such as Tygon® and PharMed®. These adapters are composed of a PEEK™ polymer female nut, our Super Flangeless™ ferrule system and an ETFE or PEEK conical adapter body. The narrow coned end of the adapter body allows peristaltic tubing to slide on more easily than it does onto conventional barbed adapters. Peristaltic tubing is also easier to remove from our Conical Adapters, since no cutting or excessive pulling is required.0.40” (1.02 cm)1.05” (2.67 cm)P-7940.40” (1.02 cm)1.30” (3.30 cm)P-7990.40” (1.02 cm)1.30” (3.30 cm)P-797P-798Conical AdapterAdapter BodySuper Flangeless Ferrule SystemFemale NutRigid or Semi-Rigid Tubing(not included)Peristaltic Tubing(not included)1/4-28Peristaltic Tubing AdaptersThese unique adapters connect peristaltic tubing to standard 1/16” or 1/8” OD tubing. A specially-designed nose allows the peristaltic tubing to simply press fit over the nose and then be held tightly in place by the retainer sleeve. Your 1/16” OD tubing may then be connected with the Flangeless Fittings supplied with the adapter. To connect your peristaltic tubing to 1/8” OD tubing, simply replace the supplied fittings with your choice of Flangeless Fittings from page 24.One popular application for these adapters is to use them as “stops” for your peristaltic pump. By doing so, you can reduce the amount of peristaltic tubing required for your flowpath, thus reducing cost.P-757Peristaltic Tubing Adapter includes P-200/P-235 Flangeless Fittings, and 3 sizes of retainer sleevesAdapterBodyAdapterCapRetainerSleevePeristaltic Tubing (not included)0.94” (2.39 cm)0.62” (1.57 cm)1/4-28Part No. Description Peristaltic Tubing OD Peristaltic Tubing ID Thru-Hole PricePERISTALTIC TUBING ADAPTERSP-757 Standard Adapter up to 0.180” (4.55 mm) 0.048”– 0.110” (1.20 – 2.80 mm) 0.030" (0.75 mm) $ 33.92P-767 Large Bore Adapter up to 0.250” (6.35 mm) 0.100”– 0.150” (2.55 – 3.80 mm) 0.070" (1.78 mm) 37.35CONICAL ADAPTER ASSEMBLIESPart No. Description Rigid or Semi-Rigid Tubing OD Peristaltic Tubing ID Thru-Hole PriceP-794 Conical Adapter 1/16” 0.020” – 0.030” (0.50 mm – 0.75 mm) 0.020” (0.50 mm) $ 18.06P-797 Conical Adapter 1/16” 1/16” – 3/32” (1.55 mm – 2.40 mm) 0.040” (1.0 mm) 13.19P-798 Conical Adapter 1/8” 1/16” – 3/32” (1.55 mm – 2.40 mm) 0.040” (1.0 mm) 13.19P-799 Conical Adapter 1/8” 3/32” – 1/8” (2.40 mm – 3.20 mm) 0.060” (1.5 mm) 13.19CONICAL ADAPTER REPLACEMENT PARTSPart No. Description Material For Use With PriceF-156 Female Nut, 1/8”, 1/4-28 Black PEEK P-798, P-799 $ 6.10P-420 Female Nut, 1/16”, 1/4-28 Natural PEEK P-794, P-797 6.10P-259 Super Flangeless Ferrule, 1/16” Yellow ETFE/SST P-794, P-797 2.78P-359 Super Flangeless Ferrule, 1/8” Yellow ETFE/SST P-798, P-799 2.78P-690 Conical Adapter Body Natural ETFE P-797, P-798 4.45P-691 Conical Adapter Body Natural ETFE P-799 4.45P-692 Conical Adapter Body Natural PEEK P-794 9.32Specialty Barbed AdaptersTo help secure peristaltic tubing more firmly to the Upchurch Scientific Conical Adapters, simply attach a cable tie to the outside of the peristaltic tubing once it has been placed onto the Adapter body.Application NoteTop Seller SEE STARRED PRODUCTSUse the adapters on this page to connect rigid and semi-rigid tubing (pages 63 – 69 and 70 – 73) to the peristaltic tubing on pages 75 – 89.Related ProductsFOR ORDERING & DISTRIBUTOR INFORMATION +1 800 426 0191 • +1 360 679 2528 • www.idex-hs.com