Manual Application Instructions for PondPro 2000 - Agriculture Brochure

Surface preparation: Your pond surface needs to be clean, dry and structurally sound. We suggest not using any detergents in your Pond. A medium bristle brush and water is all that is needed. You want the surface to be clean of any dirt that will be picked up with the nap of the roller or in the paintbrush used during the application process. Avoid cleaners and detergents since any remaining residue may harm your fish or plants. Only if your pond does not have plants or fish should you consider using cleaning solutions. On an epdm liner that has not been coated with other coatings it is simply a one coat application of PondPro2000. For ponds that have been coated with a 3rd party coating and for any concrete pond you would be ordering the "PondPro Concrete". Any loose caulking needs to first be removed and replaced with either butyl or acrylic caulk. Any oil or wax must be completely removed with solvent (mineral spirits). Remove loose portions of existing coatings with a scraper and wire brush. Whatever coatings still have good adhesion may remain and coated with the PondPro Concrete. Rusty or pitted metal should be wire brushed to remove loose oxide. Tightly adhering corrosion may be directly coated with PondPro 2000.