Marathon 2c/temp Starting Instructions Brochure

STARTING INSTRUCTIONS 1) Make sure no LED lights are flashing on the 2c\\\\temp unit. 2) If LED is flashing this indicates unit has been already started. DO NOT USE. Place started unit aside and mark STARTED on the label. 3) If no LED’s are flashing depress black button (use for example the tip of a paperclip) below START and make sure you see the GREEN LED flash several times. (This indicates the unit has started.) 4) If it does not flash repeat step 3 and make sure the button has not jammed. NOTE it should flash right after depressing the start button. 5) If still no flashing label as DEFECTIVE place aside and use another unit then contact Scigiene Corporation, www.scigiene.com at 416-261-4865. 6) After starting and verifying operation place product immediately in the shipment and seal the box or close the container door. 7) If placed on a pallet or in a container datalogger should be attached in such a manner as to prevent removal for tampering and at the highest point in warm weather or lowest in cooler weather (heat rises, cold sinks).