MEDICA Pro Single High Flow Purification System Specifications Sheet

MEDICA DIAGNOSTICSSpace saving – ‘all in one’ design allows easy under-bench installation and flexibility for future relocation • as the laboratory growsEconomy – budget adherence is maintained by optimal water purification technology and the use of • an optional E-cartridge to reduce CO2, depending on the feedwater quality Guaranteed performance at all times – self monitoring software with built in emergency by-pass allows • uninterrupted operation 24 hours per dayGuaranteed bacterial specification – onboard technology combined with easy system sanitization ensures • a specification of <1 CFU/ml Upgradable configuration – from • 30 l/hr up to 120 l/hr production rate, 2 l/min up to 4 l/min flow rate, to grow as the laboratory growsThe MEDICA Pro range is specifically designed to meet the water quality needs of high performance, high volume single or multiple Clinical Diagnostic Analyzers. All MEDICA Pro systems deliver up to 4 l/min of CLSI type 1 water with a choice of 30, 60 or 120 l/hr productivity to match your analyzer requirements. The single system design incorporates all the water purification components plus a 50 liter storage reservoir to ensure a very quick and cost-effective installation.MEDICA Pro-R/REProtekPretreatmentCartridgeFeedwaterInlet UV LampCatagory 5Air GapBoostPump DrainDrainDrainReverseOsmosisModulesHandOperatedValveEmergency By-pass(Optional)E-Cartridge PumpCVFReservoirCompositeVent FilterDelivery/ RecirculationPumpMedpure DeionizationCartridge(Optional) Medpure DeionizationCartridgeUltra Micro FiltrationOutletto AnalyzerReturn From Loop Water Quality SensorWater Quality SensorTo Distribution LoopTemperatureSensorProcess Flow MEDICA Pro-REMEDICA Pro-R/REMEDICA Pro R RE Datasheet 2011 V4.indd 1 21/1/11 16:53:17MEDICA DIAGNOSTICSELGA LabWaterTel: +44 (0) 1494 887500 Fax: +44 (0) 1494 887505Email: info@elgalabwater.com Website: www.elgalabwater.comELGA is the global laboratory water brand name of Veolia Water Solutions and Technologies. The information contained in this document is the property of VWS (UK) Ltd, trading as ELGA LabWater, and is supplied without liability for errors or omissions. © VWS (UK) Ltd. 2010 – All rights reserved. ELGA® and MEDICA® are registered trademarks of VWS (UK) Ltd.LITR 38759-04Treated Water SpecificationsMODEL MEDICA Pro-30 MEDICA Pro-60 MEDICA Pro-120Make-up rate @15°C 30 l/hr 60 l/hr 120 l/hrDelivery flow rate – maximum Up to 4 l/min @ 14psi (1bar) 1 Up to 4 l/min @ 14psi (1bar) 1 Up to 4 l/min @ 14psi (1bar) 1Inorganics (resistivity @25°C) >10 M?-cm >10 M?-cm >10 M?-cmOrganics (TOC) - typical <30 ppb <30 ppb <30 ppbBacteria - typical <1 CFU/ml 2 <1 CFU/ml 2 <1 CFU/ml 2Particles 0.05 µm filter 0.05 µm filter 0.05 µm filterSilica <0.05 mg/l <0.05 mg/l <0.05 mg/l1 With high flow kit (LA700) or 2 l/min @ 14 psi (1bar) without high flow kit. 2 Subject to correct operating and maintenance procedures.Dimensions and weightsDimensions Height 820mm (32.8in), 834mm (33.4in) including castors, Width 794mm (31.8in), Depth 470mm (18.8in)Supply weight 45kg 52Kg 53KgOperational weight 102Kg 109Kg 110KgInstallation Floor/bench Floor/bench Floor/benchFeedwater RequirementSource Tap water as detailed belowConductivity <2000 µS/cm 3ContaminantHardness <250 ppm as CaCO3Free Chlorine <4 ppm Cl2Chloramine <1 ppm Cl2Silica <30 ppm SiO2Fouling Index <10 FIIron/manganese <0.1 ppmOrganics <3 ppm TOCTemperature 4 – 40°C (Recommended 15 – 25°C)Flowrate (requirement at 15°C) 9 l/min 9 l/min 9 l/minDrain requirements (gravity fall with air gap)20 l/min 20 l/min 20 l/minFeedwater pressure 90psi (6bar) maximum, 30psi (2bar) minimumFailure to comply with the feedwater pretreatment recommendations will affect the life and performance of key components and may invalidate the warranty.Feedwater requirements are specified for systems fitted with a Protek pretreatment cartridge. If feedwater purity is variable or values are outside any of the above ranges, additional pretreatment is recommended to be installed in the feedwater supply to the MEDICA Pro system. If in doubt seek advice from Technical Support at ELGA LabWater. 3 Purification pack life may vary with feedwater >1400 µS/cmElectrical RequirementsMains Input 230V ac, 50Hz, 115V, 60HzSystem control voltage (not including pumps and UV)24V dcPower consumption (peak demand)650VAElectrical protection rating 10 ampsNoise level <63dBAMEDICA Pro R RE Datasheet 2011 V4.indd 2 21/1/11 16:53:18