Metal Separators Products Brochure

hamoshamos FFS / HS / LCSElectronic All-Metal Separatorshamos electronic All-Metal Separators - Economical and reliable protection of machines and productshamos Electronic All-Metal Separators are used for fully automatic separation of metallic contamination. Both ferrous and non-ferrous metals (e. g. aluminium, brass, stainless steel etc.) are detected and separated. Electronic All-Metal Separators are an economic protection of processing machinery and tools. Damages and shut-downs are avoided reliably.Metal Separators are important guarantors for the quality of raw materials and final products in the fields of feed, plastics, chemicals etc.Application Fields Plastic industry Recycling industry Feed industryAnwendungsgebiete For protection of extruders and other equipment Plastic regrind and flakes And many moreYour Advantages Protection of machinery, tools and products Easy to operate Thousand-fold proven technology Easy to mount Fully automatic operationIhre Vorteile Integrated electronics Self-monitoring with diagnostic function Universal field of application Large range of accessories Almost maintenance-free FFShamos FFS hamos HS hamos FFS Flakes PPSENSORFFS FunktionsprinizpELEKTRONIKPNEUMATIKHS Funktionsprinzip ELEKTRONIKPNEUMATIK.ELEKTRONIKPNEUMATIKELEKTRONIKPNEUMATIKELEKTRONIKPNEUMATIKLCS Funktionsprinzipcontaminated materials fall off. During the reject procedure the material inlet is closed by a sluice plate. After metal rejection the sensor is returned to the initial position. The hamos LCS is available in three different sizes (50, 70 and 100 mm [2”, 2¾”, 4”] withmax. Sensitivitiesfrom approx. 1.0 mm.hamos FFS - The Solution for Pneumatic Conveying Systems With hamos FFS All-Metal Separators the product to be demetallised is conveyed through the metal search coil pneumatically. Depending on the kind of transportation (pressure or vacuum system, continuous or intermittent) specially designed rejection mechanisms are used. When a metallic particle is detected the rejection flap inside the unit is opened. The product stream is Units for tube diameters from 38 mm [1½”] (max. sensitivity approx. 0.5 mm) up to 100 mm [4 “] (max. sensitivity approx. 1.2 mm) are offered.diverted temporarily and the metallic part is sent into the separation container together with a small amount of product. The conveying pressure is retained during the entire separation procedure. hamos HS All-Metal Separators are designed for gravity fed free flowing products. The material falls through the shaft of the metal separator. Contingently contained metallic parts are detected electronically. A pneumatic operated ejection flap is activated. The product stream is diverted temporarily and the metallic part is separated together with a small amount of the product.Our stocking program contains units with sensitivities from approx. 0.5 mm (steel sphere diameter) and for throughputs up to 23,000 kg per hour.© hamos GmbH 2012 / HS_FFS_LCS eng hamoshamos supplies additional systems: KWS Electrostatic Separators for recovery of finest metallic particles EKS Electrostatic Separators for plastic-plastic separation hamos HS - The Solution for Free-fall Applicationshamos LCS - The Solution for Direct Mounting on Extruders and Injection Moulding Machineshamos LCS separators are used for slowly moved material columns. When metal is detected the completesearch coil together with the contaminated material is brought into the reject position pneumatically. The hamos GmbHRecycling- und SeparationstechnikIm Thal 1782377 Penzberg / GermanyPhone: +49 (0) 8856 / 9261-0Fax: +49 (0) 8856 / 9261-99ek@hamos.comwww.hamos.comYour local agent / representative: All data, pictures and features shown on this catalogue are purely indicative and have no legal validity. The manufacturer reserves the right to make changes and or update information at any time without prior notice.HS functional principleFFS functional principleLCS functional principle 1: HS 2: HS 2