Metal Tube Cutter MRA Brochure

MRAMetal Tube CutterThe clever solution for cutting tubes manually.This Metal Tube Cutter is especially designed for cramped working places and for chipless cutting processes.For manual cutting of metal tubes in each position.Easy to use – first-rate cutting technology.Advantages:• No electricity required• Chipless cutting procedure• Requires little space• For badly accessible areasThe patented cutting technique used in designing the MRA is based on the diameter-speci? c clamping shells and the ? exible multi-roller cutting chain. Both these components are made of hardened, wear resistant steel and provide the following advantages:• Long service life of the components• The cutting chain is at a right-angle around the tube• The MRA runs on track rollers on the clamping shells• Minimum hand movements• Tubes made of stainless steel can be cutprecision.power.simplicity.l Guiding of the multi-roller cutting chain and the MRA through the clamping shellswww.orbitalum.coml Cutting tubes manuallyMetal Tube Cutter MRATechnical dataDimensions 450 x 105 mm (17.7 x 4.1 inch)Weight MRA (without chain)Weight complete (with case)3.1 kg8.0 kgCode 790 008 001Scope of delivery 1 Metal Tube Cutter MRA, tools, 1 pair of working gloves, 1 plastic carrying case (ABS)Working rangeTube outer diameter OD 33.7 - 254.0 mm (1.327 - 10.000 inch)Wall thickness (depends on material)* 0.8 - 3.0 mm (0.031 - 0.118 inch)Tube material High-alloy steels (special steel material no. 1.40... – 1.45... as per DIN 17 455 and DIN 17 456), no-alloy and low-alloy steels, aluminum, casting materials, non-iron metals, PVDF plastic. Others upon request.* for high-alloy steels, the max. wall thickness which can be processed is 2.0 - 2.5 mm (0.08 - 0.09 inch).The technical data are not binding. They are not warranted characteristics and are subject to change. Please consult our general conditions of supply.Diameter-specific clamping jaws.Sturdy, plastic carrying case (ABS).Multi-roller cutting chains:The cutting wheels are made from hardened steel.Code 790 700 242_01Info-Hotline: +49 (0) 77 31 792-787 up to 789© Orbitalum Tools GmbH | An ITW Company | 11.2008Josef-Schüttler-Straße 17, 78224 Singen, GermanyPhone +49 (0) 77 31 792-0, Fax +49 (0) 77 31 792-524www.orbitalum.com, tools@orbitalum.comStamp of distributor: