MISTRAL 802 Wet & Dry Vacuum Cleaners Brochure

MISTRAL 802 Wet & Dry Wet & dry Industrial vacuum FEATURES The vacuum cleaners MISTRAL 802 is powered by by-pass motors, carbon brush type, providing a rapid cooling of the motor in case of overheating. The motors are installed inside a sturdy plastic case; special noise buffers reduce the noise within the safety standards of work. The aluminium die-cast suction inlet has Ø 80mm., and can be used with hoses ranging from 80 to 40 mm. The dust kit is made by a double bag type filter, made up by a polyester filter on the inside, providing a good filtration (3 micron efficiency (cat. L), and nylon on the outside, in order to protect the main filter from abrasive or cutting material. The dust filter has a self cleaning system, which causes the dust to shake off each time the vacuum is shut off. The wet kit consists of a floating device, protecting the motor against damage from liquids, foam and solid objects; a nylon filter prevents solid material blocking the floating, or foam getting to the motors. An 80 lt. container enables to dispose easily of the sucked up liquid, which can be discharged by a flexible discharge hose. The frame is made of epoxidic painted steel and mounted on four wheels, two of them rotating and one with brake. A Ø 50mm. accessory kit ( 80-50 MM. steel hose connector, a PVC flexible hose (Ø 50 mm., length 2,5 mm.), an aluminium flat nozzle and a PVC hand-brush) is supplied with the vacuum. OPTIONS Pocket filters for high temperature, extra fine, antistatic or sticky dust AISI 304 Stainless steel container MODEL MTL802WD Tension Volt HZ 230 (110) 50/60 Single phase motors N. 2 Power KW 2,3 Vacuum rate mm.H2O 2.500 Air flow M3/h 360 Filter surface (bag filter) Cm2 8.000 Capacity Lt. 80 Floating device Standard Suction inlet Ø 80 Noise level dB(A) 74 Dimensions cm. 50 x 48 Height cm. 108 Weight Kg. 30 The manufacturer holds the right to change data and features without notice