Model API 600 - Cast Steel Non-Return Valves - Brochure

13 API 600 WALL UPRIGHT AND ANGLE NON-RETURN VALVES BOLTED BONNET, ASME CLASSES 300 AND 600 CAST CARBON OR ALLOY STEEL • Weld ends are available per ASME B16.25 or per cus-tomer’s specification. • Impactor hand wheel design standard on the following sizes to assist seating. 6” and larger class 300 4” and larger class 600 • NON-RETURN valve discs are fully body guided for smooth operation; internal pres-sure equalization eliminates need for external equalizer pipe. • Each valve has a unique certifi-cation number that is traceable to the valve certification sheet which includes MTR data, pres-sure test, inspection result and certificate of conformance. Type Class Fig. No. Globe 300 3084 600 6084 Item Applicable Specification Wall thickness API 600 Pressure - temperature ratings ASME B16.34 General valve design B16.34 End to End dimensions ASME B16.10 Flange design ASME B16.5 Butt Weld design ASME B16.25 Materials ASTM Design Specifications DESIGN FEATURES: • Standard trim is API trim 8 for class 300 carbon steel valves and API trim 5 for all chrome alloy valves and class 600 carbon steel valves for optimal performance under normal conditions. Other trim materials available on re-quest. • Wall thickness per heavy wall API 600 requirements. • Seat faces lapped for smooth finish and superior sealing. • Swivel disc for optimal seating and longer seat life. • Stems of hand wheel operated valves are rotating / rising de-sign. • Each valve is shell, seat and backseat pressure tested per industry standard API 598. • Gland is two piece gland / gland flange design for optimal align-ment and uniform packing com-pression. • End Flanges have the following raised faces per ASME B16.5: Class 300: 1/16” (2mm) Class 600: 1/4” (7mm) • Other available options as follows: -Alternate valve materials such as chrome and stainless steel alloys -Alternate trim materials -Bypass, drain and other auxiliary connections -Gear, motor, and cylinder actuators available -NACE service -Special cleaning for applications such as oxygen or chlorine -Other options available as specified Type Class Fig. No. Angle 300 3086 600 6086 NOTE: See page 52 for flow, safety and maintenance information. STANDARD MATERIALS (Other materials available) PART MATERIALS Body A216 Gr. WCB A217 Gr. WC6 A217 Gr. WC9 Bonnet A216 Gr. WCB A217 Gr. WC6 A217 Gr. WC9 Disc A105 or A217 WC6 + Stellite 6 Faced A217 WC9 + Stellite 6 Faced A216 WCB + 13% Cr Faced (1) Disc Nut SST 410 Seat Ring Carbon Steel + Stellite 6 Faced A182 F11 + Stellite 6 Faced A182 F22 + Stellite 6 Faced Stem SST 410 Stem Bushing A 439 Ductile NI-Resist Gr. D2 Stem Bushing Set Screw Steel Gland Flange Carbon Steel Eye Bolt A193 Gr. B7 Eye Bolt Nut A194 Gr. 2H Groove Pin Steel Gland SST 410 Packing Graphite Packing Washer SST 410 Gasket Spiral Wound SST with Graphite Back Seat SST 410 Hand Wheel Malleable Iron or Steel Hand Wheel Nut Malleable Iron or Steel Body / Bonnet Stud A193 Gr. B7 A193 Gr. B16 Body / Bonnet Nut A194 Gr. 2H A194 Gr. 7 Identification Plate Series 300 SST (1) Class 600 discs have stellite facing. nhammersmithTypewritten TextPowell Valves2503 Spring Grove Ave.Cincinnati, OH 45214Phone: 513-852-2000Fax: 513-852-2997 14 NON-RETURN VALVE DIMENSIONS (CLASS 300 AND 600). (1) The center to end length, A1, is half of the end to end length, A. (2) Gear operators standard on 12” class 600 valves. Height is to top of actuator. (3) NOTE: Weld ends are avail-able upon request. FE = Flanged ends B = Center to top closed C = Center to top open F = Dismantling Dimension CV = Flow coefficient NON–RETURN TECHNICAL INFORMATION (CLASS 300 AND 600) SIZE ASME 300 ASME 600 in A (1) B C D E A (1) B C D E mm FE FE 4 14.00 16.7 18.0 4.00 14 17.00 20.2 21.7 4.00 18 100 356 423 458 102 356 432 514 552 102 450 6 17.50 21.0 23.2 6.00 18 22.00 25.7 27.9 6.00 24 150 445 534 589 152 450 559 653 709 152 610 8 22.00 23.9 26.3 8.00 22 26.00 29.1 31.6 7.87 28 200 559 606 669 203 560 660 739 803 200 710 10 24.50 29.7 10.00 24 31.00 32.7 9.75 28 250 622 753 254 610 787 830 248 710 12 28.00 34.2 12.00 28 33.00 47.8 (2) 11.75 32 300 711 868 305 710 838 1215 (2) 298 800 35.1 892 41.2 1047 38.9 988 SIZE ASME 300 ASME 600 F WT CV F WT CV in Globe in Angle in Globe lb Angle lb Globe in Angle in Globe lb Angle lb mm mm mm kg kg Globe Angle mm mm kg kg Globe Angle 4 21.0 23.0 170 165 200 300 25.0 27.0 280 255 200 300 100 535 580 77 75 630 685 127 116 6 27.5 30.5 295 275 480 730 32.0 35.0 580 570 480 730 150 690 770 134 125 815 895 263 259 8 30.5 34.5 580 540 880 1300 36.5 40.5 985 945 850 1300 200 770 880 263 245 925 1030 447 429 10 34.0 39.5 875 810 1400 2100 41.0 46.5 1425 1390 1300 2000 250 870 1005 397 367 1045 1180 646 630 12 40.0 46.0 1160 1090 2000 3100 47.0 51.5 1900 1860 2000 3000 300 1010 1165 526 494 1190 1300 862 844 ADDITIONAL SIZES, MATERIALS AND CLASSES AVAILABLE UPON REQUEST.