IMP ARMATURE d.o.o.
Model Art. 438 - Tapping Bridge Valves and Saddles Brochure
www.imp-ta.siwww.imp-ta.sicontrol the streamWetogether with you.IMP ARMATURE d.o.o.Ljubljanska cesta 43SI 1295 Ivancna GoricaT +386 (1) 78 87 300F +386 (1) 78 87 328E info@imp-ta.siwww.imp-ta.sicontrol the streamWetogether with you.Product RangeButter?y ValvesNon-Return Valves / Check ValvesStrainersHydrantsGate ValvesTapping BridgesService Connection ValvesOur AdvantagesSwift responsiveness and short delivery times, without unnecessary delays.Design and production of industrial valves for customers with even the most speci?c require-ments.Ability to produce in very small quantities (upwards of one product).Flexibility and excellent customer support. You can always rely on usCopyright © 2014, IMP Armature, d.o.o. All rights reserved. The trademarks identi?ed herein are the trademarks or registered trademarks of IMP Armature, d.o.o. or other third party.RANGE OF PRODUCTSRANGE OF PRODUCTSwww.imp-ta.si Fire hydrant for quick use in case of ?res and temporary connecting of pipe network It is not necessary to dig out the hydrant in case of replacement of sealing parts Extremely light weight of the hydrant enables quick and simple installation Sealing technique enables self-cleaning of the sealing area Hydrant head can easily be rotated and ?xed on any position High permeability of the hydrant – good hydraulic properties Good visibility Connection to a pipeline network with an N or an FF piece Hydrants are manufactured acc. to Construction Products Directive 89/106 EEC Outlets for connecting ?re hose: STANDARD DN 80 2xC 1xB DN 100 2xC 1xA ON REQUEST DN 80 2xB 1xA or 2xB DN 100 2xC 1xB or 2xB All other outlets possible by agreement. Production test acc. to EN 12266 Shell 25 bar rate A Seat tightness 1.1 x PN rate A Full epoxy coated to DIN 30677-2 and GSK guidelines – 250 µmArt. 2005FIRE HYDRANTEN 14384 TYPE A,C / CPD 89/106/EECEN 1074-6 / EN 1074-1DN 80/100PN 10/16DUCTILE IRON / INOXArt. 2009SHUT OFF SYSTEMFIRE HYDRANT WITH ADDITIONALEN 14384 TYPE A,C / CPD 89/106/EECEN 1074-6 / EN 1074-1DN 80/100PN 10/16DUCTILE IRON / INOXArt. 2008TUNNEL HYDRANTEN 14384 / CPD 89/106/EECEN 1074-6 / EN 1074-1DN 80/100PN 10/16DUCTILE IRON / INOXNote:All mounting depthsare possibleby agreement. DESIGN WITH BREAK SYSTEM VALPOSDESIGN WITHOUT BREAK SYSTEMHydraulic characteristics DN80 and DN1000,00 100,00 200,00 300,00 400,00 500,00 600,00 700,00 800,00 900,00 1000,00 1100,00 20 40 60 80 100 120 140 160 180 200 Flow m3/h Pressure loss mbar Outlets 1XB Outlets 1XC Outlets 1XA Outlets 2XB Outlets 2XC Underground HydrantsOverground HydrantsNote:We can offer you completedevelopment from drawingto serial production.WE MANUFACTURE HYDRANTS FOR SEVERAL DIFFERENT MARKETS AND COUNTRIESArt. 2012 EF3 / ET3THROUGH BORE UNDERGROUND HYDRANTEN 14339 / EN 1074-6 / EN 1074-1DN 80PN 10/16DUCTILE IRON / INOXFIX & TELESCOPIC VERSIONArt. 2006UNDERGROUND HYDRANTEN 14339 / CPD 89/106/EEC / EN 1074-6 / EN 1074-1DN 80PN 10/16DUCTILE IRON / INOXArt. 2010PArt. 2006 - Hydraulic characteristics DN800,00100,00200,00300,00400,00500,00600,00700,00800,00900,001000,001100,0020 40 60 80 100 120 140 160Flow m3/hPressure loss mbarunderground DN80Art. 2009 GOSTUFH GOST UNDERGROUND HYDRANTGOST R 53961-2010 / EN 1074-6 / EN 14339 / CPD 89/106 EECDN 100PN 10 Underground hydrant for quick use in case of ?re Simple maintenance – construction of underground hydrant valve is the same as by ?re hydrant Sealing technique enables self-cleaning of the sealing area Connection to a pipeline network with an N or an FF piece Hydrants are manufactured acc. to Construction Products Directive 89/106 EEC Extremely light weight of the hydrant enables quick and simple mounting Flanges compatible with standard EN 1092-2 requirements Outlet ?ange according to DIN 3221 Production test acc. to EN 12266 Shell 25 bar rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µm Underground hydrant for quick use in case of ?re Simple maintenance – construction of underground hydrant valve is the same as by ?re hydrant Sealing technique enables self-cleaning of the sealing area Connection to a pipeline network with an N or an FF piece Hydrants are manufactured acc. to Construction Products Directive 89/106 EEC Extremely light weight of the hydrant enables quick and simple mounting Flanges compatible with standard EN 1092-2 requirements Outlet ?ange according to DIN 3221 Production test acc. to EN 12266 Shell 25 bar rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmwww.imp-ta.si Fire hydrant for quick use in case of ?res and temporary connecting of pipe network It is not necessary to dig out the hydrant in case of replacement of sealing parts Extremely light weight of the hydrant enables quick and simple installation Sealing technique enables self-cleaning of the sealing area Hydrant head can easily be rotated and ?xed on any position High permeability of the hydrant – good hydraulic properties Good visibility Connection to a pipeline network with an N or an FF piece Hydrants are manufactured acc. to Construction Products Directive 89/106 EEC Outlets for connecting ?re hose: STANDARD DN 80 2xC 1xB DN 100 2xC 1xA ON REQUEST DN 80 2xB 1xA or 2xB DN 100 2xC 1xB or 2xB All other outlets possible by agreement. Production test acc. to EN 12266 Shell 25 bar rate A Seat tightness 1.1 x PN rate A Full epoxy coated to DIN 30677-2 and GSK guidelines – 250 µmArt. 2005FIRE HYDRANTEN 14384 TYPE A,C / CPD 89/106/EECEN 1074-6 / EN 1074-1DN 80/100PN 10/16DUCTILE IRON / INOXArt. 2009SHUT OFF SYSTEMFIRE HYDRANT WITH ADDITIONALEN 14384 TYPE A,C / CPD 89/106/EECEN 1074-6 / EN 1074-1DN 80/100PN 10/16DUCTILE IRON / INOXArt. 2008TUNNEL HYDRANTEN 14384 / CPD 89/106/EECEN 1074-6 / EN 1074-1DN 80/100PN 10/16DUCTILE IRON / INOXNote:All mounting depthsare possibleby agreement. DESIGN WITH BREAK SYSTEM VALPOSDESIGN WITHOUT BREAK SYSTEMHydraulic characteristics DN80 and DN1000,00 100,00 200,00 300,00 400,00 500,00 600,00 700,00 800,00 900,00 1000,00 1100,00 20 40 60 80 100 120 140 160 180 200 Flow m3/h Pressure loss mbar Outlets 1XB Outlets 1XC Outlets 1XA Outlets 2XB Outlets 2XC Underground HydrantsOverground HydrantsNote:We can offer you completedevelopment from drawingto serial production.WE MANUFACTURE HYDRANTS FOR SEVERAL DIFFERENT MARKETS AND COUNTRIESArt. 2012 EF3 / ET3THROUGH BORE UNDERGROUND HYDRANTEN 14339 / EN 1074-6 / EN 1074-1DN 80PN 10/16DUCTILE IRON / INOXFIX & TELESCOPIC VERSIONArt. 2006UNDERGROUND HYDRANTEN 14339 / CPD 89/106/EEC / EN 1074-6 / EN 1074-1DN 80PN 10/16DUCTILE IRON / INOXArt. 2010PArt. 2006 - Hydraulic characteristics DN800,00100,00200,00300,00400,00500,00600,00700,00800,00900,001000,001100,0020 40 60 80 100 120 140 160Flow m3/hPressure loss mbarunderground DN80Art. 2009 GOSTUFH GOST UNDERGROUND HYDRANTGOST R 53961-2010 / EN 1074-6 / EN 14339 / CPD 89/106 EECDN 100PN 10 Underground hydrant for quick use in case of ?re Simple maintenance – construction of underground hydrant valve is the same as by ?re hydrant Sealing technique enables self-cleaning of the sealing area Connection to a pipeline network with an N or an FF piece Hydrants are manufactured acc. to Construction Products Directive 89/106 EEC Extremely light weight of the hydrant enables quick and simple mounting Flanges compatible with standard EN 1092-2 requirements Outlet ?ange according to DIN 3221 Production test acc. to EN 12266 Shell 25 bar rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µm Underground hydrant for quick use in case of ?re Simple maintenance – construction of underground hydrant valve is the same as by ?re hydrant Sealing technique enables self-cleaning of the sealing area Connection to a pipeline network with an N or an FF piece Hydrants are manufactured acc. to Construction Products Directive 89/106 EEC Extremely light weight of the hydrant enables quick and simple mounting Flanges compatible with standard EN 1092-2 requirements Outlet ?ange according to DIN 3221 Production test acc. to EN 12266 Shell 25 bar rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmGOSTGOSTwww.imp-ta.siNEWSEVA Service connection valve threaded for potable water acc. to EN 1074-1 and 2 / EN 1171 Body material: ductile iron Brass wedge vulcanized with EPDM rubber Low torque Production test acc. to EN 12266 Shell1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µm It shows continuously the position (open/closed position) of the gate valve It allows fast and suitable intervention in unwanted and stressful situations The installation of VALPOS position indicator is recommended for application in industrial zones, cities and in all places where nothing is to be left to chanceArt. 735GAVERESILIENT SEATED GATE VALVESERVICE CONNECTION VALVEEN 1171, EN 1074-2, EN 1074-1DN 50-500PN 10/16? Pmax = 16barArt. 740GAVERESILIENT SEATED GATE VALVEEN 1171, EN 1074-2, EN 1074-1DN 50-500PN 10/16? Pmax = 16barArt. 731VALPOSGATE VALVE POSITION INDICATORDN 50-500PN 10/16? Pmax = 16barArt. 745TELESCOPIC EXTENSION SPINDLEFOR SEVAArt. 746EN 1171, EN 1074-2, EN 1074-1DN 20-50 (3/4” - 2”)Art. 730TELESCOPIC EXTENSIONSPINDLEDN 50-500 Flanged resilient seated gate valve for potable water and waste water Material: ductile iron Simple construction and low weight Low torque Simple maintenance and handling All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. EPDM rubber approved acc. to KTW and W 270 Operation with hand wheel, telescopic extension spindle or electric actuator Gate valve is manufactured and tested acc. to EN 1074-1 and 2 / EN 1171 Face to face length acc. to EN 558-1, basic series 14 (F4) and 15 (F5) Flanges compatible with standard EN 1092-2 requirements Production test acc. to EN12266 Shell1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmGate ValvesGate ValvesGOSTGOSTwww.imp-ta.siNEWSEVA Service connection valve threaded for potable water acc. to EN 1074-1 and 2 / EN 1171 Body material: ductile iron Brass wedge vulcanized with EPDM rubber Low torque Production test acc. to EN 12266 Shell1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µm It shows continuously the position (open/closed position) of the gate valve It allows fast and suitable intervention in unwanted and stressful situations The installation of VALPOS position indicator is recommended for application in industrial zones, cities and in all places where nothing is to be left to chanceArt. 735GAVERESILIENT SEATED GATE VALVESERVICE CONNECTION VALVEEN 1171, EN 1074-2, EN 1074-1DN 50-500PN 10/16? Pmax = 16barArt. 740GAVERESILIENT SEATED GATE VALVEEN 1171, EN 1074-2, EN 1074-1DN 50-500PN 10/16? Pmax = 16barArt. 731VALPOSGATE VALVE POSITION INDICATORDN 50-500PN 10/16? Pmax = 16barArt. 745TELESCOPIC EXTENSION SPINDLEFOR SEVAArt. 746EN 1171, EN 1074-2, EN 1074-1DN 20-50 (3/4” - 2”)Art. 730TELESCOPIC EXTENSIONSPINDLEDN 50-500 Flanged resilient seated gate valve for potable water and waste water Material: ductile iron Simple construction and low weight Low torque Simple maintenance and handling All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. EPDM rubber approved acc. to KTW and W 270 Operation with hand wheel, telescopic extension spindle or electric actuator Gate valve is manufactured and tested acc. to EN 1074-1 and 2 / EN 1171 Face to face length acc. to EN 558-1, basic series 14 (F4) and 15 (F5) Flanges compatible with standard EN 1092-2 requirements Production test acc. to EN12266 Shell1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmGate ValvesGate Valveswww.imp-ta.siACCESSORIESArt. 611BRINAEN 1074-2, EN 1074-1DN 63-225? Pmax = 16barTAPPING BRIDGE FOR PE PIPESArt. 610UNI - BRINAEN 1074-2, EN 1074-1DN 80-400? Pmax = 16barUNIVERSAL TAPPING BRIDGE Art. 028PIPE SADDLEDN 63-225PIPE SADDLE FOR PE PIPES Swivel elbow 90° Enables installation to the pipeline under pressure Maximum drilling diameter 33 mm Stainless steel rubber covered strap Appropriate for metal pipes (ductile iron pipes, steel and stainless steel pipes, etc.) All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Maintenance is not needed Production test acc. to EN 12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µm Swivel elbow 90° Enables installation to the pipeline under pressure Maximum drilling diameter 33 mm Appropriate for non-metal pipes (PE pipes, etc.) All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Maintenance is not needed Production test acc. to EN 12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmUNDER PRESSURE DRILLING MACHINEArt. 055Art. 605TELESCOPIC EXTENSION SPINDLEH = 800 - 1400H = 1300 - 1800for drilling under pressureTapping Bridges & SaddlesTapping Bridges & Saddleswww.imp-ta.siACCESSORIESArt. 611BRINAEN 1074-2, EN 1074-1DN 63-225? Pmax = 16barTAPPING BRIDGE FOR PE PIPESArt. 610UNI - BRINAEN 1074-2, EN 1074-1DN 80-400? Pmax = 16barUNIVERSAL TAPPING BRIDGE Art. 028PIPE SADDLEDN 63-225PIPE SADDLE FOR PE PIPES Swivel elbow 90° Enables installation to the pipeline under pressure Maximum drilling diameter 33 mm Stainless steel rubber covered strap Appropriate for metal pipes (ductile iron pipes, steel and stainless steel pipes, etc.) All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Maintenance is not needed Production test acc. to EN 12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µm Swivel elbow 90° Enables installation to the pipeline under pressure Maximum drilling diameter 33 mm Appropriate for non-metal pipes (PE pipes, etc.) All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Maintenance is not needed Production test acc. to EN 12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmUNDER PRESSURE DRILLING MACHINEArt. 055Art. 605TELESCOPIC EXTENSION SPINDLEH = 800 - 1400H = 1300 - 1800for drilling under pressureTapping Bridges & SaddlesTapping Bridges & SaddlesGOSTGOSTwww.imp-ta.siArt. 438Check ValvesCheck ValvesArt. 531CHECK VALVE WITH SPRINGEN 12334, EN 1074-3, EN 1074-1DN 40-600PN 6/10/16/25/40ANSI PN 20/50ANSI 150/300Art. 511CHECK VALVEEN 12334, EN 1074-3, EN 1074-1DN 40-600PN 6/10/16/25/40ANSI PN 20/50ANSI 150/300 Wafer type body construction with soft sealing or metallic sealing for complete and quick closing of the back ?ow of liquid and gaseous media Metal-metal sealing cannot assure 100 % tightness Wide range of application Production test acc. to EN12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A This construction enables and ensures the operation of this check valve even when the pipeline is not completely horizontal The spring ensures non-slam e?ect Wafer type body construction with soft sealing or metallic sealing for complete and quick closing of the back ?ow of liquid and gaseous media Metal-metal sealing cannot assure 100 % tightness Wide range of application Production test acc. to EN12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Diaphragm non return valve with soft sealing for complete, quick and silent closing of the back ?ow All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Wide range of application Face to face EN 558-1, basic series 48 (DIN 3202, F6) Production test acc. to EN12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Flanges compatible with standard EN 1092-2 requirements Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmArt. 435NORVASWING CHECK VALVEEN 12334, EN 1074-3, EN 1074-1DN 40-500PN 6*/10/16? Pmax = 16bar*by agreementArt. 442MEVADIAPHRAGM NON-RETURN VALVEEN 1074-3, EN 1074-1DN 40-400PN 6*/10/16? Pmax = 16bar*by agreement Swing check valve for complete and quick closing of the back ?ow Simple construction Turnable disc enables double service life - for dim. up to DN 300 DN 350, 400, 500 with relief valve (bypass) Fast and easy disassembly of cover and disc No special maintanance needed Low pressure loss Wide range of application in potable and waste water systems Face to face length acc. to EN 558-1, basic series 48 Flanges compatible with standard EN 1092-2 requirements All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Production test acc. to EN12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmGOSTGOSTwww.imp-ta.siArt. 438Check ValvesCheck ValvesArt. 531CHECK VALVE WITH SPRINGEN 12334, EN 1074-3, EN 1074-1DN 40-600PN 6/10/16/25/40ANSI PN 20/50ANSI 150/300Art. 511CHECK VALVEEN 12334, EN 1074-3, EN 1074-1DN 40-600PN 6/10/16/25/40ANSI PN 20/50ANSI 150/300 Wafer type body construction with soft sealing or metallic sealing for complete and quick closing of the back ?ow of liquid and gaseous media Metal-metal sealing cannot assure 100 % tightness Wide range of application Production test acc. to EN12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A This construction enables and ensures the operation of this check valve even when the pipeline is not completely horizontal The spring ensures non-slam e?ect Wafer type body construction with soft sealing or metallic sealing for complete and quick closing of the back ?ow of liquid and gaseous media Metal-metal sealing cannot assure 100 % tightness Wide range of application Production test acc. to EN12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Diaphragm non return valve with soft sealing for complete, quick and silent closing of the back ?ow All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Wide range of application Face to face EN 558-1, basic series 48 (DIN 3202, F6) Production test acc. to EN12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Flanges compatible with standard EN 1092-2 requirements Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmArt. 435NORVASWING CHECK VALVEEN 12334, EN 1074-3, EN 1074-1DN 40-500PN 6*/10/16? Pmax = 16bar*by agreementArt. 442MEVADIAPHRAGM NON-RETURN VALVEEN 1074-3, EN 1074-1DN 40-400PN 6*/10/16? Pmax = 16bar*by agreement Swing check valve for complete and quick closing of the back ?ow Simple construction Turnable disc enables double service life - for dim. up to DN 300 DN 350, 400, 500 with relief valve (bypass) Fast and easy disassembly of cover and disc No special maintanance needed Low pressure loss Wide range of application in potable and waste water systems Face to face length acc. to EN 558-1, basic series 48 Flanges compatible with standard EN 1092-2 requirements All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Production test acc. to EN12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A Epoxy coating to DIN 30677-2 and GSK guidelines – 250 µmGOSTGOSTwww.imp-ta.siArt. 120BUTTERFLY VALVEEN 593, EN 1074-2, EN 1074-1DN 50-300PN 6/10/16? Pmax = 16barArt. 220BUTTERFLY VALVEEN 593, EN 1074-2, EN 1074-1DN 350-600PN 10/16? Pmax = 16bar DN 350-500? Pmax = 10bar DN 600Art. 125-126BUTTERFLY VALVEEN 593, EN 1074-2, EN 1074-1DN 50-400PN 6/10/16/25Art. 126 ? Pmax = 16barArt. 125 ? Pmax = 25barLUG TYPE Resilient seated centric butter?y valve For ON/OFF and regulation service of liquid and gaseous media Wide range of application Excellent ?ow characteristics Operation with lever, manual worm gear, pneumatic or electric actuator (Art. 120 DN 50 – DN 100 are standard equipped with lever) Face to face per EN 558 – 1, basic series 20 (DIN 3202 – K1) Flange for actuator acc. to DIN ISO 5211 Di?erent seal materials are possible: EPDM, NBR, FKM (Viton), Q (Silicone) Production test acc. to EN 12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Type 126 is a standard valve with changeable seal, applicable as an end valve up to ? Pmax = 6 bar Type 125 with vulcanized seal onto body, applicable up to ? Pmax = 25 bar also as an end valve and for vacuum up to -0,85 bar WAFER TYPEWAFER TYPEACCESSORIES FOR BUTTERFLY VALVESELECTRIC ACTUATORDN 50-600MANUAL WORM GEARType 120, 125, 126, 220 / DN 50-600PNEUMATIC ACTUATORDN 50-500PLASTIC-PA6 LEVER FOR BUTTERFLY VALVEType 120 / DN 50-100 StandardLEVER FOR BUTTERFLY VALVE DUCTILE – POMType 120, 125, 126 / DN 50-150Butter?y ValvesButter?y ValvesGOSTGOSTwww.imp-ta.siArt. 120BUTTERFLY VALVEEN 593, EN 1074-2, EN 1074-1DN 50-300PN 6/10/16? Pmax = 16barArt. 220BUTTERFLY VALVEEN 593, EN 1074-2, EN 1074-1DN 350-600PN 10/16? Pmax = 16bar DN 350-500? Pmax = 10bar DN 600Art. 125-126BUTTERFLY VALVEEN 593, EN 1074-2, EN 1074-1DN 50-400PN 6/10/16/25Art. 126 ? Pmax = 16barArt. 125 ? Pmax = 25barLUG TYPE Resilient seated centric butter?y valve For ON/OFF and regulation service of liquid and gaseous media Wide range of application Excellent ?ow characteristics Operation with lever, manual worm gear, pneumatic or electric actuator (Art. 120 DN 50 – DN 100 are standard equipped with lever) Face to face per EN 558 – 1, basic series 20 (DIN 3202 – K1) Flange for actuator acc. to DIN ISO 5211 Di?erent seal materials are possible: EPDM, NBR, FKM (Viton), Q (Silicone) Production test acc. to EN 12266 Shell 1.5 x PN rate A Seat tightness 1.1 x PN rate A All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS, etc. Type 126 is a standard valve with changeable seal, applicable as an end valve up to ? Pmax = 6 bar Type 125 with vulcanized seal onto body, applicable up to ? Pmax = 25 bar also as an end valve and for vacuum up to -0,85 bar WAFER TYPEWAFER TYPEACCESSORIES FOR BUTTERFLY VALVESELECTRIC ACTUATORDN 50-600MANUAL WORM GEARType 120, 125, 126, 220 / DN 50-600PNEUMATIC ACTUATORDN 50-500PLASTIC-PA6 LEVER FOR BUTTERFLY VALVEType 120 / DN 50-100 StandardLEVER FOR BUTTERFLY VALVE DUCTILE – POMType 120, 125, 126 / DN 50-150Butter?y ValvesButter?y Valveswww.imp-ta.si StrainersStrainersY - STRAINERPED 97/23/EC Art. 020-021DN 15-300PN 6/10/16/25DN 250-1200PN PN 6/10/16/25/40Art. 024-025DN 15-200PN 25/40DN 3/8”-2”PN 16Grey Iron JL 1040 / GG25Ductile Iron JS 1025 / GGG 40.3Carbon Steel Casted GP 240 GHCarbon Steel Welded S 235 JRStainless Steel Welded*other welded materials by agreementDIFFERENT MATERIALSThreaded EndsFlanged EndsWelded EndsEND CONNECTIONSArt. 300Art. 350T - STRAINERDN 150-800PN 6/10/16/25Carbon Steel Welded S 235 JRStainless Steel Welded*other welded materials by agreementDIFFERENT MATERIALSFlanged EndsWelded EndsEND CONNECTIONSArt. 300TT - OPEN TOP STRAINERDN 50-500PN 6/10/16/25Carbon Steel Welded S 235 JRStainless Steel Welded*other welded materials by agreementDIFFERENT MATERIALSSystems of potable water, heating systems, process engeneering; with temperature up to 400°C.APPLICATION INProviding protection for other valves, increase the system reliability and reduce maintenance costs.Production test acc. to EN 12266Shell 1.5 x PN rate AAPPLICATION FORFlanged EndsWelded EndsEND CONNECTIONSArt. 002-003Art. 020-021WITH BALL VALVEwww.imp-ta.si StrainersStrainersY - STRAINERPED 97/23/EC Art. 020-021DN 15-300PN 6/10/16/25DN 250-1200PN PN 6/10/16/25/40Art. 024-025DN 15-200PN 25/40DN 3/8”-2”PN 16Grey Iron JL 1040 / GG25Ductile Iron JS 1025 / GGG 40.3Carbon Steel Casted GP 240 GHCarbon Steel Welded S 235 JRStainless Steel Welded*other welded materials by agreementDIFFERENT MATERIALSThreaded EndsFlanged EndsWelded EndsEND CONNECTIONSArt. 300Art. 350T - STRAINERDN 150-800PN 6/10/16/25Carbon Steel Welded S 235 JRStainless Steel Welded*other welded materials by agreementDIFFERENT MATERIALSFlanged EndsWelded EndsEND CONNECTIONSArt. 300TT - OPEN TOP STRAINERDN 50-500PN 6/10/16/25Carbon Steel Welded S 235 JRStainless Steel Welded*other welded materials by agreementDIFFERENT MATERIALSSystems of potable water, heating systems, process engeneering; with temperature up to 400°C.APPLICATION INProviding protection for other valves, increase the system reliability and reduce maintenance costs.Production test acc. to EN 12266Shell 1.5 x PN rate AAPPLICATION FORFlanged EndsWelded EndsEND CONNECTIONSArt. 002-003Art. 020-021WITH BALL VALVEwww.imp-ta.siStrainersAdvantages of TWINcleaner: Three functions in one product (3 in 1) Reduced number of sealing joints which are potential threats for leakage Reduced installation length – you gain on space Installation time is four times shorter compared with installation time of standard strainer and two butter?y valves Additional gaskets for installation in the pipeline are not needed. This strainer has already integrated ?anged gaskets Costs of screw and gasket material is three times reduced Possible to upgrade the strainer with electric or pneumatic actuator for automatic closing or reducing of ?ow Additional accessories: - air valve used after cleaning the screen - manometer holes (connections) at inlet and outlet - magnetic insertTWINcleanerSTRAINER WITH TWO BUTTERFLY VALVESDN 50-100PN 10/16GREY CAST IRONQualityQuality policyThe company policy is to ensure high level of quality as follows: We comply with all of our customers' requirements and monitor their satisfaction We comply with all legal regulations applying to processes and products We hold regular educational seminars for employees We constantly develop and improve our system and our products We perform regular management reviews We carry out corrective and preventive measures We regularly control and evaluate production processes All of our products are 100% tested and evaluated Standard ISO 9001: 2008 We have established a quality management system for the ?elds of development, production and marketing of industrial valves. We obtained our ?rst certi?cate in Decem-ber 1994 and we were the ?rst company in Slovenia which has obtained this certi?cate in the ?eld of industrial valves. Compliance with this standard is reviewed every year by an independent certi?cation body, TÜV SÜD. Pressure Equipment Directive PED 97/23/EC – CE mark This certi?cate is based on the European Pressure Equipment Directive PED 97/23/EC, annex III, module H and is issued by the certifying body TÜV SÜD for development, production and sales of industrial valves. This certi?cate ensures that the company has established and still uses a quality management system pursuant to the above mentioned directive and that the producer is entitled to label their products with the CE mark and the identi?cation number of the certifying body. Construction Products Directive 89/106/EEC As producers of overground hydrants Art. 2005 A/C and Art. 2009 A/C and of underground hydrants Art. 2006 and last but not least of underground hydrants Art. 2010P, we comply with all of the requirements of the European Construction Products Directive (CPD) 89/106/EEC. This con?rms the compliance certi?cation issued by ZAG Ljubljana. DVGW certi?cates for: - UNI BRINA Art. 610 - Universal tapping bridge for all metal pipes - BRINA Art. 611 - Tapping bridge for non-metal pipes- gate valves Art. 735 – 740- overground hydrants with additional shut o? system Art. 2009 - A without break system - overground hydrants with additional shut o? system Art. 2009 - C with break system- underground hydrants Art. 2010P with additional shut o? system ÖVGW certi?cates for: - gate valves Art. 735 - 740 - overground hydrants Art. 2005 A/C, Art. 2008 and Art. 2009 A/C GOST certi?cates for:- ?anged strainers made of grey cast iron and ductile iron- butter?y valves- gate valves Art. 735 – 740- swing check valve NORVA Art. 435 - diaphragm non-return valve MEVA Art. 442- UFH GOST underground hydrant CERTIFICATES for the UKRAINIAN MARKET for:- strainers- butter?y valves- gate valves Art. 735 – 740- swing check valve NORVA Art. 435 - diaphragm non-return valve MEVA Art. 442 All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS and UAB, etc.Internationally recognized certi?cates are an additional guarantee for the quality of IMP productsNEWwww.imp-ta.siStrainersAdvantages of TWINcleaner: Three functions in one product (3 in 1) Reduced number of sealing joints which are potential threats for leakage Reduced installation length – you gain on space Installation time is four times shorter compared with installation time of standard strainer and two butter?y valves Additional gaskets for installation in the pipeline are not needed. This strainer has already integrated ?anged gaskets Costs of screw and gasket material is three times reduced Possible to upgrade the strainer with electric or pneumatic actuator for automatic closing or reducing of ?ow Additional accessories: - air valve used after cleaning the screen - manometer holes (connections) at inlet and outlet - magnetic insertTWINcleanerSTRAINER WITH TWO BUTTERFLY VALVESDN 50-100PN 10/16GREY CAST IRONQualityQuality policyThe company policy is to ensure high level of quality as follows: We comply with all of our customers' requirements and monitor their satisfaction We comply with all legal regulations applying to processes and products We hold regular educational seminars for employees We constantly develop and improve our system and our products We perform regular management reviews We carry out corrective and preventive measures We regularly control and evaluate production processes All of our products are 100% tested and evaluated Standard ISO 9001: 2008 We have established a quality management system for the ?elds of development, production and marketing of industrial valves. We obtained our ?rst certi?cate in Decem-ber 1994 and we were the ?rst company in Slovenia which has obtained this certi?cate in the ?eld of industrial valves. Compliance with this standard is reviewed every year by an independent certi?cation body, TÜV SÜD. Pressure Equipment Directive PED 97/23/EC – CE mark This certi?cate is based on the European Pressure Equipment Directive PED 97/23/EC, annex III, module H and is issued by the certifying body TÜV SÜD for development, production and sales of industrial valves. This certi?cate ensures that the company has established and still uses a quality management system pursuant to the above mentioned directive and that the producer is entitled to label their products with the CE mark and the identi?cation number of the certifying body. Construction Products Directive 89/106/EEC As producers of overground hydrants Art. 2005 A/C and Art. 2009 A/C and of underground hydrants Art. 2006 and last but not least of underground hydrants Art. 2010P, we comply with all of the requirements of the European Construction Products Directive (CPD) 89/106/EEC. This con?rms the compliance certi?cation issued by ZAG Ljubljana. DVGW certi?cates for: - UNI BRINA Art. 610 - Universal tapping bridge for all metal pipes - BRINA Art. 611 - Tapping bridge for non-metal pipes- gate valves Art. 735 – 740- overground hydrants with additional shut o? system Art. 2009 - A without break system - overground hydrants with additional shut o? system Art. 2009 - C with break system- underground hydrants Art. 2010P with additional shut o? system ÖVGW certi?cates for: - gate valves Art. 735 - 740 - overground hydrants Art. 2005 A/C, Art. 2008 and Art. 2009 A/C GOST certi?cates for:- ?anged strainers made of grey cast iron and ductile iron- butter?y valves- gate valves Art. 735 – 740- swing check valve NORVA Art. 435 - diaphragm non-return valve MEVA Art. 442- UFH GOST underground hydrant CERTIFICATES for the UKRAINIAN MARKET for:- strainers- butter?y valves- gate valves Art. 735 – 740- swing check valve NORVA Art. 435 - diaphragm non-return valve MEVA Art. 442 All materials are approved for application in potable water systems acc. to EN 681, KTW, W270, WRAS and UAB, etc.Internationally recognized certi?cates are an additional guarantee for the quality of IMP productsNEWwww.imp-ta.siwww.imp-ta.sicontrol the streamWetogether with you.IMP ARMATURE d.o.o.Ljubljanska cesta 43SI 1295 Ivancna GoricaT +386 (1) 78 87 300F +386 (1) 78 87 328E info@imp-ta.siwww.imp-ta.sicontrol the streamWetogether with you.Product RangeButter?y ValvesNon-Return Valves / Check ValvesStrainersHydrantsGate ValvesTapping BridgesService Connection ValvesOur AdvantagesSwift responsiveness and short delivery times, without unnecessary delays.Design and production of industrial valves for customers with even the most speci?c require-ments.Ability to produce in very small quantities (upwards of one product).Flexibility and excellent customer support. You can always rely on usCopyright © 2014, IMP Armature, d.o.o. All rights reserved. The trademarks identi?ed herein are the trademarks or registered trademarks of IMP Armature, d.o.o. or other third party.RANGE OF PRODUCTSRANGE OF PRODUCTS
Most popular related searches