Model CX-400 Series - Universal Photoelectric Sensors - Brochure

Ampli? er Built-inCompact Photoelectric SensorCX-400 SERIES Ver.2 World StandardUpgraded to Increase UsabilityAchieving low power consumption and high noise-resistanceUL RecognitionConforming toEMC DirectiveCerti? ed(Some models only)ideas for life2010.11 panasonic-electric-works.net/sunx18/07/20111The CX-400 series incorporates an acrylic that strongly resists oils and coolant ? uids, and a polycarbonate indicator cover that strongly resists ethanol .The CX-400 series is also characterized by strong resistance to noise, reciprocal interference and cold environments.The lens material is made of a strong acrylic that resists the harmful effects of coolants. These sensors can be used with con? dence even around metal processing machine that disperse oil mists.Incorporates a polycarbonate indicator cover that strongly resists ethanol. This makes it compatible with food processors that spray ethanol-based cleaning ? uids.The world standard CX-400 seriesSensors that are environmentally and user friendly.The total lineup of 148 models covers through the inclusion of a newly developed custom integrated circuit. This CX-400 series upgrade achieves a significantly higher reliability in the same package as the older model.Demonstrating stable detection, even in harsh environmentsResistant to oil and coolant liquids CX-41?/42?/49? Strongly ethanol resistant CX-44?/48?StrongIncludes an analog CMOS processor ASICProviding stable detection with low power consumptionTest Oil JIS Standard Product NameLubricant - Velocity Oil No. 3Water-insoluble cutting oil2-5 Daphnecut AS-30D2-11 Yushiron Oil No.2ac (Note)Water-soluble cutting oilW1-1 Yushiron Lubic HWC68 (Note)W2-1 Yushiroken S50N (Note)1,000 hours; Immersion (depth 0 m); Insulation resistance 20 M?/250 VNote: Yushiron and Yushiroken are registered trademarks of Yushiro Chemical Industry Co., Ltd.18/07/20112Contributing to reduced carbon dioxide emissionsElectricity consumed by the CX-400 series has been reduced on average 10.5 mA. Calculating 8 hours/day, 260 days (operating 5 days/week) for a total of 2,080 hours/year leads to:The CX-400contributesApprox. 84.6 t annually in carbon dioxide reductions to the worldThe CX-400 series have three different cable length types and uses very simple packaging to reduce waste. The bag is made of polyethylene and does not emit toxic gasses.Thanks to its unique optics and specialized design, the CX-400’s electronic circuits allows for consistent sensing of minute 0.4 mm 0.016 in (the thickness of a business card) differences or 10 ?m 0.394 mil ultra-thin ? lm.Thoroughly eliminating unnecessary waste,Reducing many environmental burdensHigh performanceFor many applicationsSaveHighPerformanceStronger noise resistanceStronger inverter countermeasuresThe CX-400 has a high noise resistance then its previons model. By incorporating an inverter countermeasure circuit that appropriately shifts with peak wavelength, the sensor now resists high-frequency noise from high-voltage inverter motors and inverter lights more effectively.Stronger output short-circuit resistanceStronger inverse wiring connection protectionStrengthening the output circuit inverse polarity protection prevents sensor damage caused by mistaken output or power supply wiring.Previous CX-48225 mAUpgrade for up to 60% reductionNew CX-48210 mAReducing environmental burdens furtherUp to 60% less power consumptionThe CX-400 series achieves reductions in power consumption of up to 60%, averaging 44% reduction when upgrading due to its unique design. These sensors reduce carbon emissions and contribute to environmental friendliness.1Upgrade2Upgrade 3Upgrade18/07/20113Thru-beam typeRetrore? ective typeStrong in dust and dirtCX-412/413The infrared light source is strong in dust and dirt compared to the red beam type.Even the thru-beam type is strong at mutual interferenceCX-411Two CX-411 sensors, with their red beam light source, can be installed close together by inserting an interference prevention filter.Interference prevention filter (Optional)Strong infrared beamCX-412/413Remarkable penetrating ability enables applications such as package content detection come into practice. (Note)Note: When sensing utilizing penetrating power, make sure to verify using the actual sensor.Long sensing range of 5 m 16.404 ftCX-493A long 5 m 16.404 ftsensing range is possible with the red LED type that is easy to align with the beam axis. The sensors can be used for wide automatic door shutters.Retrore? ective type with polarizing ? ltersCX-491Built-in polarizing filters ensure stable sensing even on a mirror surface object.Strong against extraneous light and noiseCX-491Hardly affected by extraneous lights or noises, these sensors provide stable sensing.Two sensors can be mounted close togetherAll modelsThe interference prevention function lets two sensors of any type to be mounted close together precisely.CX-411: 10 m 32.808 ftCX-412: 15 m 49.213 ftCX-413: 30 m 98.425 ftCX-493: 5 m 16.404 ftCX-491: 3 m 9.843 ftCX-482: 2 m 6.562 ftCX-483: 1 m 3.281 ftCX-481: 0.5 m 1.640 ft? Detecting box collapsing within the rail of stacker crane? Synchronizing sensor for image processing systemsApplicationsCX-411CX-411For transparent object sensingCX-41318/07/20114Introducing transparent object sensing type sensorCX-48?Our unique optical system and transparent object sensing circuit provide stable sensing of thinner transparent objects than the conventional models.Twice the sensingrangeTransparent objects detectable with CX-48? (Typical examples)Sensing object Sensing object size (mm in)Glass sheet ?50 ?1.969 t=0.7 t=0.028Cylindrical glass ø50 ø1.969 ? =50 ? =1.969 t=1.3 t=0.051Acrylic board ?50 ?1.969 t=1.0 t=0.039Styrol (Floppy case) ?50 ?1.969 t=0.9 t=0.035Food wrapping film ?50 ?1.969 t=10 ?m t=0.394 milCigarette case film ?50 ?1.969 t=20 ?m t=0.787 milVinyl bag ?50 ?1.969 t=30 ?m t=1.181 milPet bottle (500m?) ø66 ø2.598Reflector setting range CX-481: 300 to 500 mm 11.811 to 19.685 inCX-482: 1 to 2 m 3.281 to 6.562 ftCX-483: 500 to 1,000 mm 19.685 to 39.370 in[with the RF-230 reflector at the optimum condition (Note)]Each object should pass across the beam at the center between the sensor and the reflector.? : Length of cylindrical glasses t : Thickness of sensing objectNote: The optimum condition is defined as the condition in which the sensitivity level is set such that the stability indicator just lights up when the object is absent.Diffuse re? ective typeCX-422: 800 mm 31.496 inCX-421: 300 mm 11.811 inCX-424: 100 mm 3.937 inCX-423: 70 to 300 mm 2.756 to 11.811 inApplicationsApplicationsCX-411CX-411CX-491CX-491? Detecting pins in the case? Passage con?rmation on substrate conveyor equipment? Detecting glossy electric appliances? Passage con? rmation ofobject on a conveyor belt? Detecting plastic bottles stacked on pallets? Detecting transparent ? lmCX-423Spot diameterø2.2 mm 0.087 in approx.100 mm3.937 inapprox.100 mm3.937 inapprox.CX-424Narrow-view typeCX-481CX-482Great visibility approx. ø2 mm ø0.079 in high luminance spot beam (at setting distance 100 mm 3.937 in)CX-423Beam axis alignment made easy with a high luminance spot beamCX-423These sensors have a high luminance red LED spot beam which provides bright visibility enabling the sensing position to be checked at a glance.Because it achieved small beam spot approx. ø2 mm ø0.079 in at setting distance 100 mm 3.937 in, approx. ø5 mm ø0.197 in at setting distance 200 mm 7.874 in, even the minutest object can be accurately detected.Reduction of volume adjustment laborAll modelsBecause these sensors possess many variations depending on the sensing range, they enable you to make optimal volume adjustment easily.18/07/20115Hardly affected by colorsBoth black and white objects can be sensed at the same distances. No adjuster control is needed, even when products of different colors are moving along the production line.30 % highersensingcapabilityThe difference in sensing range 1% or less between non-glossy white paper with a setting distance of 50 mm 1.969 in and non-glossy gray paper with a brightness level of 5.High precision typeCX-441/443Can sense height differences as small as 0.4 mm 0.016 in, with hysteresis of 2 % or lessAn advanced optical system provides sensing performance that is approx. 2.5 times than conventional models. Even ultra-small differences of 0.4 mm 0.016 incan be detected accurately.Height differences of as little as 0.4 mm 0.016 in can be detected at a setting distance of 20 mm 0.787 in0.4 mm0.016 in2.5 times the sensing capabilitySelect from 2 spot diameters as per applicationWithin the choice of 50 mm 1.969 insensing range sensors, we offer small spot type of approx. ø2 mm ø0.079 inoptimal for detecting minute objects and large spot type of approx. ø6.5 mm ø0.256 in capable of sensing objects covered with holes and grooves.CX-441Spot diameter: ø2 mm ø0.079 inapprox.[Positioning]Detects minute holes.CX-443Spot diameter: ø6.5 mm ø0.256 inapprox.[ ]Detection of presence / absence of objectsIgnores minute holes and accurately detects objects.1.5 times longer than before300 mm 11.811 in100 mm 3.937 in 50 mm 1.969 inSpot diameter ø2 mm ø0.079 in approx. 50 mm 1.969 inSpot diameter ø6.5 mm ø0.256 in approx.CX-442CX-441CX-444CX-443The bright spot makes beam axis alignment easyAll modelsThese sensors have a high luminance red spot that provides bright visibility. The sensing position can be checked at a glance. Because the CX-441 sensor has a small spot beam, at approx. ø2 mm ø0.079 in, even the minutest object can be accurately detected.Great visibility approx. ø2 mm ø0.079 in high luminance spot CX-441Can be used for sensing minute differencesAll modelsEquipped with a 5-turn adjuster so that even challenging range settings can be handled with ease.Adjustable range re? ective type18/07/20116BGS / FGS functions make even the most challenging settings possibleThe BGS function is best suited for the following case The FGS function is best suited for the following caseBackground not presentWhen object and background are separatedBackground presentWhen object and background are close together When the object is glossy or unevenNot affected if the background color changes or someone passes behind the conveyor.Unaffected by gloss, color or uneven surfaces when sensing objects present on a conveyor belt.Caution: Please use the FGS function together with a conveyor or other background unit.FGS (Foreground suppression) functionThe sensor judges that an object is present when no light is received at position B of the light-receiving element (2-segment element). Accordingly, even objects that are glossy can be sensed. This is useful if the object and background are close together, or if the object being sensed is glossy.Conveyor Conveyor ConveyorLight received at position ALight is not received at position B, so an object is judged to be presentLight received at position BALensEmittingelementObject present For glossy objectObject absentON ONOFFBOFF in this condition only ON in all other conditionsSettingdistanceA conveyor or other back-ground must be present( )BGS (Background suppression) functionThe sensor judges that an object is present when light is received at position A of the light-receiving element (2-segment element). This is useful if the object and background are far apart. The distance adjustment method is the same as the conventional adjustment method for adjustable range reflective type sensors.Setting distanceObjectMoving objectin the backONOFFElement BElement ABackgroundLight received at element B, or light not received ( ) ( )Light received at element ADetects minute objects unaffected by glossy background objects. Uses FGS function.Stable sensing even for thin objects. Uses FGS function.Not affected by color variations in objects and background objects. Uses BGS function.Applications? Small tablet detection ? Biscuit detection ? Passage con? rmationCX-443CX-442CX-441BGS FGS18/07/20117 ORDER GUIDE Type Appearance Sensing rangeModel No. (Note 1) OutputoperationEmittingelementNPN output PNP outputThru-beam10 m 32.808 ft CX-411 CX-411-PSwitchableeither Light-ON or Dark-ONRed LEDLong sensing range15 m 49.213 ft CX-412 CX-412-PInfraredLED30 m 98.425 ft CX-413 CX-413-PRetrore? ectiveWith polarizing ? lters 3 m 9.843 ft (Note 2) CX-491 CX-491-PRed LEDLong sensing range 5 m 16.404 ft (Note 2) CX-493 CX-493-PFor transparent object sensing50 to 500 mm 1.969 to 19.685 in (Note 2) CX-481 CX-481-PInfraredLED50 to 1,000mm 1.969 to 39.37 in (Note 2) CX-483 CX-483-P0.1 to 2 m 0.328 to 6.562 ft (Note 2) CX-482 CX-482-PDiffuse re? ective100 mm 3.937 in CX-424 CX-424-PInfraredLED300 mm 11.811 in CX-421 CX-421-P800 mm 31.496 in CX-422 CX-422-PNarrow-view70 to 300 mm 2.756 to 11.811 in CX-423 CX-423-P Red LEDAdjustable range re? ectiveSmall spot2 to 50 mm 0.079 to 1.969 inCX-441 CX-441-PRed LEDCX-443 CX-443-P15 to 100 mm 0.591 to 3.937 in CX-444 CX-444-P20 to 300 mm 0.787 to 11.811 in CX-442 CX-442-PNOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets.Notes: 1) The model No. with “E” shown on the label af? xed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver.(e.g.) Emitter of CX-411: CX-411E, Receiver of CX-411: CX-411D 2) The sensing range of the retrore? ective type sensor is speci? ed for the RF-230 re? ector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Setting rangeof the reflector: BSensingobjectSensingrange: ASensor ReflectorCX-491? CX-493? CX-481? CX-483? CX-482?A 0 to 3 m0 to 9.843 ft0 to 5 m0 to 16.404 ft50 to 500 mm1.969 to 19.685 in50 to 1,000 mm1.969 to 39.37 in0.1 to 2 m0.328 to 6.562 ftB 0.1 to 3 m 0.328 to 9.843 ft0.1 to 5 m 0.328 to 16.404 ft100 to 500 mm 3.937 to 19.685 in100 to 1,000 mm3.937 to 39.37 in0.8 to 2 m2.625 to 6.562 ftStandard type18/07/20118Type Appearance Sensing rangeModel No.(Note 1) OutputoperationEmittingelementNPN output PNP outputThru-beam10 m 32.808 ftCX-411A-C05 CX-411A-P-C05 Light-ONRed LEDCX-411B-C05 CX-411B-P-C05 Dark-ONLong sensingrange15 m 49.213 ftCX-412A-C05 CX-412A-P-C05 Light-ONInfraredLEDCX-412B-C05 CX-412B-P-C05 Dark-ONRetrore? ectiveWith polarizing ? lters 3 m 9.843 ft (Note 3)CX-491A-C05-Y CX-491A-P-C05-Y Light-ONRed LEDCX-491B-C05-Y CX-491B-P-C05-Y Dark-ONNOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mounting brackets.Notes: 1) The model No. with “E” shown on the label af? xed to the thru-beam type sensor is the emitter, “D” shown on the label is the receiver.(e.g.) Emitter of CX-411A-C05: CX-411E, Receiver of CX-411A-C05: CX-411AD 2) The re? ector is sold separately. 3) The sensing range of the retrore? ective type sensor is speci? ed for the RF-230 (optional) re? ector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Setting rangeof the reflector: BSensingobjectSensingrange: ASensor Reflector(Optional)CX-491?A 0 to 3 m 0 to 9.843 ftB 0.1 to 3 m0.328 to 9.843 ftORDER GUIDEBasic type (Without operation mode switch and sensitivity adjuster. Cable is 0.5 m 0.02 in long)Optional (Note 2)18/07/20119ORDER GUIDE0.5 m 1.640 ft / 5 m 16.4 ft cable length types0.5 m 1.640 ft / 5 m 16.404 ft cable length types (standard: 2 m 6.562 ft, basic: 0.5 m 1.640 in) are also available.When ordering this type, suf? x “-C05” for the 0.5 m 1.640 ft cable length type, “-C5” for the 5 m 16.404 ft cable length type to the model No.(Excluding CX-44? and basic type.)(e.g.) 0.5 m 1.640 ft cable length type of CX-411-P is “CX-411-P-C05”5 m 16.404 ft cable length type of CX-411-P is “CX-411-P-C5”M8 plug-in connector type, M12 pigtailed typeM8 plug-in connector type and M12 pigtailed type are also available.When ordering this type, suf? x “-Z” for the M8 connector type, “-J” for the M12 pigtailed type to the model No. (Please note that M12 pigtailed type is not available for CX-44?. Excluding basic type.)(e.g.) M8 connector type of CX-411-P is “CX-411-P-Z”M12 pigtailed type of CX-411-P is “CX-411-P-J”Mating cables (2 cables are required for the thru-beam type.)•Type Model No. Cable length DescriptionFor M8 plug-in connector typeStraightCN-24A-C2 2 m 6.562 ftCan be used with all modelsCN-24A-C5 5 m 16.404 ftElbowCN-24AL-C2 2 m 6.562 ftCN-24AL-C5 5 m 16.404 ftFor M12 pigtailed type2-coreCN-22-C2 2 m 6.562 ft For thru-beam type emitter (2-core)CN-22-C5 5 m 16.404 ft4-coreCN-24-C2 2 m 6.562 ftCan be used with all modelsCN-24-C5 5 m 16.404 ftPackage without re? ectorNPN output type: CX-491-YPNP output type: CX-491-P-YAccessoryRF-230• (Re? ector)CN-24AL-C2•CN-24AL-C5CN-22-C2• , CN-22-C5CN-24-C2, CN-24-C5Mating cablesCN-24A-C2•CN-24A-C531.4 mm1.236 inø4 mmø0.157 inø9 mmø0.354 in23.1 mm0.909 inø4 mm ø0.157 inø9 mm ø0.354 in20.5 mm0.807 in300 mm11.811 inø14 mmø0.551 inø5 mmø0.197 in18/07/201110Interferenceprevention ? lterPF-CX4-V•(Vertical, Silver)PF-CX4-H•(Horizontal, Light brown)Two sets of CX-411??can be mounted close together.DesignationModel No.Slit sizeSensing range Min. sensing objectSlit mask Sensor Slit on one side Slit on both sides Slit on one side Slit on both sidesRound slit mask( )For thru-beam type sensor onlyOS-CX-05CX-411?ø0.5 mmø0.020 in400 mm 15.748 in 20 mm 0.787 inø12 mm ø0.472 in ø0.5 mm ø0.020 inCX-412? 600 mm 23.622 in 30 mm 1.181 inCX-413? 1,200 mm 47.242 in 60 mm 2.362 inOS-CX-1CX-411?ø1 mmø0.039 in 900 mm 35.433 in 100 mm 3.937 inø12 mm ø0.472 inø1 mm ø0.039 inCX-412? 1.35 m 4.429 ft 150 mm 5.906 inø1.5 mm ø0.059 inCX-413? 2.7 m 8.857 ft 300 mm 11.811 inOS-CX-2CX-411?ø2 mmø0.079 in2 m 6.562 ft 400 mm 15.748 inø12 mm ø0.472 inø2 mm ø0.079 inCX-412? 3 m 9.843 ft 600 mm 23.622 inø3 mm ø0.118 inCX-413? 6 m 19.685 ft 1,200 mm 47.242 inRectangular slit mask( )For thru-beam type sensor onlyOS-CX-05×6CX-411?0.5×6 mm0.020×0.236 in2 m 6.562 ft 400 mm 15.748 inø12 mm ø0.472 in 0.5×6 mm0.020×0.236 inCX-412? 3 m 9.843 ft 600 mm 23.622 inCX-413? 6 m 19.685 ft 1,200 mm 47.242 inOS-CX-1×6CX-411?1×6 mm0.039×0.236 in3 m 9.843 ft 1 m 3.281 ftø12 mm ø0.472 in 1×6 mm0.039×0.236 inCX-412? 4.5 m 14.764 ft 1.5 m 4.921 ftCX-413? 9 m 29.528 ft 3 m 9.843 ftOS-CX-2×6CX-411?2×6 mm0.079×0.236 in5 m 16.404 ft 2 m 6.562 ftø12 mm ø0.472 in 2×6 mm0.079×0.236 inCX-412? 7.5 m 24.606 ft 3 m 9.843 ftCX-413? 15 m 49.213 ft 6 m 19.685 ftOPTIONSDesignation Model No. Sensing range Min. sensing objectInterferenceprevention ? lter( )For CX-411?only PF-CX4-V(Vertical, Silver) 2 pcs. per set 5 m 16.404 ft (Note 1) ø12 mm ø0.472 in (Note 1) PF-CX4-H(Horizonal, Light brown) 2 pcs. per set Re? ector( )For retro- re? ective type sensor onlyRF-210CX-491? 1 m 3.281 ft (Note 2)ø30 mm ø1.181 inCX-493? 1.5 m 4.921 ft (Note 2)CX-481?CX-483? 0.1 to 0.3 m 0.3288 to 0.984 ft (Note 2)CX-482? 0.1 to 0.6 m 0.328 to 1.969 ft (Note 2)RF-220CX-491? 1.5 m 4.921 ft (Note 2)ø35 mm ø1.378 inCX-493? 3 m 9.843 ft (Note 2)CX-481? 50 to 300 mm 1.969 to 11.811 in (Note 2)CX-483? 0.1 to 0.7 m 0.328 to 2.297 ft (Note 2)CX-482? 0.1 to 1.3 m 0.328 to 4.265 ft (Note 2)RF-230(Note 3) CX-491?-Y 3 m 9.843 ft (Note 2) ø50 mm ø1.969 inNotes: 1) Value when attached on both sides. 2) Set the distance between the CX-491?/493? and the re? ector to 0.1 m 0.328 ft or more.However, see the table below for CX-48?.The sensing range “A” may vary depending on the shape of sensing object.Be sure to check the operation with the actual sensing object.Setting rangeof the reflector: BSensingobjectSensingrange: ASensor ReflectorModel No.A BSensor Re? ectorCX-481? RF-220 50 to 300 mm 1.969 to 11.811 in 100 to 300 mm 3.937 to 11.811 inCX-483?RF-220 0.1 to 0.7 m 0.328 to 2.297 ft 0.2 to 0.7 m 0.656 to 2.297 ftRF-210 0.1 to 0.3 m 0.328 to 0.984 ft 0.1 to 0.3 m 0.328 to 0.984 ftRF-230 0.05 to 1 m 0.164 to 3.281 ft 0.1 to 1 m 0.328 to 3.281 ftCX-482?RF-220 0.1 to 1.3 m 0.328 to 4.265 ft 0.5 to 1.3 m 1.640 to 4.265 ftRF-210 0.1 to 0.6 m 0.328 to 1.969 ft 0.3 to 0.6 m 0.984 to 1.969 ft 3) RF-230 is attached to the retrore? ective type sensor other than the basic type.Round slit maskOS-CX-• ?Fitted on the front face of the sensor with one-touch.Rectangular slit maskOS-CX-• ?×6Fitted on the front face of the sensor with one-touch.Round slit mask(Stainless steel)Rectangular slit mask(Stainless steel)Interference prevention filter50.3 mm1.98 in8.3 mm0.327 in59.3 mm2.235 inRe? ectorRF-210• RF-220•33.3 mm1.311 in11 mm0.433 in12.8 mm0.504 in35.3 mm1.390 in8.3 mm0.327 in42.3 mm1.665 inRF-230•18/07/201111 OPTIONS Designation Model No. DescriptionRe? ector mountingbracketMS-RF21-1 Protective mounting bracket for RF-210It protects the re? ector from damage and maintains alignment.MS-RF22 For RF-220MS-RF23 For RF-230Re? ective tapeRF-11Sensing range (Note 4): •0.5 m 1.640 ft [CX-491?]0.8 m 2.625 ft [CX-493?]Ambient temperature: -25 to +50 °C•-13 to +122 °FAmbient humidity: 35 to 85 % RH•Notes: 1) Keep the tape free from stress. If it is pressed too much, its capability may deteriorate.2) Do not cut the tape. It will deteriorate the sensing performance.RF-12Sensing range (Note 4):•0.7 m 2.297 ft [CX-491?]1.2 m 3.937 ft [CX-493?]0.1 to 0.6 m 0.328 to 1.969 ft [CX-482?]RF-13 Sensing range (Note 5): • 0.5 m 1.640 ft [CX-491?]Ambient temperature: -25 to +55 °C•-13 to +131 °FAmbient humidity: 35 to 85 % RH•Sensormountingbracket (Note 1)MS-CX2-1 Foot angled mounting bracket It can also be used for mounting RF-210.The thru-beam type sensor needs two brackets.MS-CX2-2 Foot biangled mounting bracket It can also be used for mounting RF-210.MS-CX2-4 Protective mounting bracketMS-CX2-5 Back biangled mounting bracketMS-CX-3 Back angled mounting bracketUniversalsensor mounting stand (Note 2)MS-AJ1 Horizontal mounting typeBasic assemblyMS-AJ2 Vertical mounting typeMS-AJ1-A Horizontal mounting typeLateral arm assemblyMS-AJ2-A Vertical mounting typeMS-AJ1-M Horizontal mounting typeAssembly for re? ectorMS-AJ2-M Vertical mounting typeSensor checker(Note 3) CHX-SC2It is useful for beam alignment of thru-beam type sensors. The optimum receiver position is given by indicators, as well as an audio signal.Notes: 1) The plug-in connector type sensor does not allow use of some sensor mounting brackets because of the protrusion of the connector. 2) Refer to the general catalog for details of the universal sensor mounting stand. 3) Refer to the general catalog for details of the sensor checker CHX-SC2. 4) Set the distance between the sensor and the re? ective tape to 0.1 m 0.328 ft (CX-482?:0.4 m 1.312 ft) or more.5) Set the distance between the sensor and the re?ective tape to 0.2 m 0.656 ft or more.Re? ector mounting bracketMS-RF23•Re? ective tapeSensor mounting bracketMS-RF21-1• MS-RF22•Two M3 (length 12 mm 0.472 in) screws with washers are attached.Two M3 (length 8 mm 0.315 in) screws with washers are attached.Two M4 (length 10 mm 0.394 in) screws with washers are attached.RF-11• RF-12•RF-13•30 mm1.181 in0.7 mm0.028 in8 mm0.315 in30 mm1.181 in25 mm0.984 in0.7 mm0.028 in30 mm1.181 in30 mm1.181 in0.5 mm0.020 inMS-CX2-1• MS-CX2-2•MS-CX2-4• MS-CX2-5•MS-CX-3•Sensor checkerTwo M3 (length 12 mm 0.472 in) screws with washers are attached.Two M3 (length 12 mm 0.472 in) screws with washers are attached.Two M3 (length 14 mm 0.551 in) screws with washers are attached.Two M3 (length 12 mm 0.472 in) screws with washers are attached.Two M3 (length 12 mm 0.472 in)screws with washers are attached.CHX-SC2•LEVELPOWER CHX-SC2Sensor checkerUniversal sensor mounting standMS-AJ2• MS-AJ2-A•With the lateral arm, the sensor can sense from above a production line.Forward / backadjustment:130 mm 5.118 inapprox.MS-AJ2-M•Elevationangle: ±45°Mounting hole for M6 screwSwivel:360° rotation45°45°Heightadjustment:150 mm 5.906 in approx.Angle adjustment: ±45°Swivel:360° rotationMountinghole for M6 screw360°45°45°rotationHeightadjustment:150 mm 5.906 in approx.Heightadjustment:150 mm 5.906 in approx.Mounting hole for M6 screwSwivel:360° rotation45°45°Elevationangle: ±45°MS-AJ1• MS-AJ1-A• MS-AJ1-M•Elevationangle: ±45°Swivel:360° rotationMounting hole for M6 screw45°45°Heightadjustment:150 mm 5.906 in approx.Angle adjustment: ±45°Swivel:360° rotationMountinghole forM6 screw360°45°45°rotationHeightadjustment:150 mm 5.906 in approx.Swivel:360° rotationElevationangle: ±45°Heightadjustment:150 mm 5.906 in approx.Mounting hole for M6 screw45°45°With the lateral arm, the sensor can sense from above a production line.Forward / back adjustment:130 mm 5.118 inapprox.18/07/201112 SPECIFICATIONS TypeThru-beam Retrore? ectiveDiffuse re? ectiveLong sensing range With polarizing ? lters Long sensing range For transparent object sensing Narrow-viewModel No. NPN output CX-411 CX-412 CX-413 CX-491 CX-493 CX-481 CX-483 CX-482 CX-424 CX-421 CX-422 CX-423Item PNP output CX-411-P CX-412-P CX-413-P CX-491-P CX-493-P CX-481-P CX-483-P CX-482-P CX-424-P CX-421-P CX-422-P CX-423-PSensing range 10 m 32.808 ft15 m 49.213 ft30m98.425 ft3 m 9.843 ft(Note 2)5 m 16.404 ft(Note 2)50 to 500 mm 1.969 to 19.685 in (Note 2)50 to 1,000mm 1.969 to 39.37 in (Note 2)0.1 to 2 m 0.328 to 6.562 ft (Note 2)100 mm 3.937 in (Note 3)300 mm11.811 in (Note 3)800 mm 31.496 in (Note 3)70 to 200 mm 2.756 to 7.874 in (Note 3)Sensing object ø12 mm ø0.472 inor more opaque object (Note 4) ø50 mm ø1.969 inor more opaque, translucent or specular object (Note 2, 5)ø50 mm ø1.969 inor more opaque or translucent object (Note 2, 5)ø50 mm ø1.969 in or more transparent, translucent or opaque object (Note 2, 5)Opaque, translucent or transparent object (Note 5)Opaque, translucent or transparent object (Note 5)( )Min. sensing object: ø0.5 mm ø0.020 in copper wireHysteresis 15 % or less of operation distance (Note 3)Repeatability (perpendicular to sensing axis) 0.5 mm 0.020 in or less 1 mm 0.039 in or less 0.5 mm 0.020 in or lessSupply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or lessCurrent consumption Emitter: 15 mA or lessReceiver: 10 mA or lessEmitter: 20 mA or lessReceiver: 10 mA or lessEmitter: 25 mA or lessReceiver: 10 mA or less13 mA or less 10 mA or less 13 mA or less 15 mA or lessOutputNPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current)PNP open-collector transistor • Maximum source current: 100 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current)Output operation Switchable either Light-ON or Dark-ONShort-circuit protection IncorporatedResponse time 1 ms or less 2 ms or less 1 ms or lessOperation indicator Orange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type)Stability indicator Green LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type)Power indicator Green LED (lights up when the power is ON) (incorporated on the emitter)Sensitivity adjuster Continuously variable adjuster (incorporated on the receiver for thru-beam type)Automatic interference prevention functionTwo units of sensors can be mounted close together with interference prevention ? lters. (Sensing range: 5 m 16.404 ft)Incorporated (Two units of sensors can be mounted close together.)Environmental resistanceProtection IP67 (IEC)Ambient temperature -25 to +55 °C -13 to +131 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °FAmbient humidity 35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminance Incandescent light: 3,000 ?x at the light-receiving faceVoltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance 20 M?, or more, with 250 V DC megger between all supply terminals connected together and enclosureVibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours eachShock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times eachEmitting element (modulated) Red LED Infrared LED Red LED Infrared LED Infrared LED Red LEDPeak emission wavelength 680 nm 0.027 mil 870 nm 0.034 mil 850 nm 0.033 mil 680 nm 0.027 mil 650 nm 0.026 mil 870 nm 0.034 mil 860 nm 0.033 mil 645 nm 0.025 milMaterial Enclosure: PBT (Polybutylene terephthalate), Lens: Acrylic (CX-48?: Polycarbonate), Indicator cover: Acrylic (CX-48?: Polycarbonate)Cable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft longCable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver)WeightNet Emitter: 45 g approx., Receiver: 50 g approx. 50 g approx.Gross 100 g approx. 80 g approx. 60 g approx.Accessories RF-230 (Re? ector): 1 pc.Notes: 1) Where measurement conditions have not been speci? ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 2) The sensing range and the sensing object of the retrore? ective type sensor are speci?ed for the RF-230 re? ector. The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object. Setting rangeof the reflector: BSensingobjectSensingrange: ASensor ReflectorCX-491?? CX-493? CX-481? CX-483? CX-482?A 0 to 3 m 0 to 9.843 ft0 to 5 m0 to 16.404 ft50 to 500 mm1.969 to 19.685 in50 to 1,000 mm1.969 to 39.37 in0.1 to 2 m0.328 to 6.562 ftB 0.1 to 3 m0.328 to 9.843 ft0.1 to 5 m0.328 to 16.404 ft100 to 500 mm3.937 to 19.685 in100 to 1,000 mm3.937 to 39.37 in0.8 to 2 m2.625 to 6.562 ft 3) The sensing range and hysteresis of the diffuse re? ective type sensor are speci? ed for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object. 4) If slit masks (optional) are ? tted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected. 5) Make sure to con? rm detection with an actual sensor before use.Standard type18/07/201113Type Adjustable range re? ectiveSmall spotModel No. NPN output CX-441 CX-443 CX-444 CX-442Item PNP output CX-441-P CX-443-P CX-444-P CX-442-PAdjustable range (Note 2) 20 to 50 mm 0.787 to 1.969 in 20 to 100 mm 0.787 to 3.937 in 40 to 300 mm 1.575 to 11.811 inSensing range (with white non-glossy paper) 2 to 50 mm 0.079 to 1.969 in 15 to 100 mm 0.591 to 3.937 in 20 to 300 mm 0.787 to 11.811 inHysteresis(with white non-glossy paper) 2 % or less of operation distance 5 % or less of operation distance Repeatability Along sensing axis: 1 mm 0.039 in or less, Perpendicular to sensing axis: 0.2 mm 0.008 in or less (with white non-glossy paper)Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or lessCurrent consumption 25 mA or lessOutputNPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current)PNP open-collector transistor • Maximum source current: 100 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current)Output operation Switchable either Detection-ON or Detection-OFFShort-circuit protection IncorporatedResponse time 1 ms or lessOperation indicator Orange LED (lights up when the output is ON)Stability indicator Green LED (lights up under stable operating condition) (Note 3)Distance adjuster 5-turn mechanical adjusterSensing mode BGS / FGS functions Switchable with wiring of sensing mode selection inputAutomatic interference prevention function (Note 4) IncorporatedEnvironmental resistanceProtection IP67 (IEC)Ambient temperature -25 to +55 °C -13 to +131 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °FAmbient humidity 35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminance Incandescent light: 3,000 ?x at the light-receiving faceVoltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance 20 M?, or more, with 250 V DC megger between all supply terminals connected together and enclosureVibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours eachShock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times eachEmitting element Red LED (Peak emission wavelength: 650 mm 25.591 in, modulated)Spot diameter ø2 mm ø0.079 in approx.(at 50 mm 1.969 in distance)ø6.5 mm ø0.256 in approx.(at 50 mm 1.969 in distance)ø9 mm ø0.354 in approx.(at 100 mm 3.937 in distance)?15 mm ?0.591 in approx.(at 300 mm 11.811 in distance)Material Enclosure: PBT (Polybutylene terephthalate), Lens: Polycarbonate, Indicator cover: PolycarbonateCable 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft longCable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.Weight Net weight: 55 g approx., Gross weight: 65 g approx.Notes: 1) Where measurement conditions have not been speci? ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 2) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can detect an object 2 mm 0.079 in [CX-444(-P): 15 mm 0.591 in, CX-442(-P): 20 mm 0.787 in], or more, away.Actual sensing range of the sensor: ASensingobjectAdjustable range: BCX-441?/443? CX-444? CX-442?A 2 to 50 mm0.079 to 1.969 in15 to 100 mm0.591 to 3.937 in20 to 300 mm0.787 to 11.811 inB 20 to 50 mm0.787 to 1.969 in20 to 100 mm0.787 to 3.937 in40 to 300 mm1.575 to 11.811 in 3) Refer to the manual or the general catalog for operation of the stability indicator. 4) Note that detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. SPECIFICATIONS Standard type18/07/201114TypeThru-beam Retrore? ectiveLong sensing range With polarizing ? ltersModel No.Light-ON Dark-ON Light-ON Dark-ON Light-ON Dark-ONNPN output CX-411A-C05 CX-411B-C05 CX-412A-C05 CX-412B-C05 CX-491A-C05-Y CX-491B-C05-YItem PNP output CX-411A-P-C05 CX-411B-P-C05 CX-412A-P-C05 CX-412B-P-C05 CX-491A-P-C05-Y CX-491B-P-C05-YSensing range 10 m 32.808 ft 15 m 49.213 ft 3 m 9.843 ft (Note 2)Sensing object ø12 mm ø0.472 in or more opaque object (Note 3) ø50 mm ø1.969 in or more transparent, translucent or opaque object (Note 2, 4)HysteresisRepeatability (perpendicular to sensing axis) 0.5 mm 0.020 in or lessSupply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or lessCurrent consumption Emitter: 15 mA or lessReceiver: 10 mA or lessEmitter: 20 mA or lessReceiver: 10 mA or less 13 mA or lessOutputNPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 2 V or less (at 100 mA sink current)1 V or less (at 16 mA sink current)PNP open-collector transistor • Maximum source current: 100 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 2 V or less (at 100 mA source current)1 V or less (at 16 mA source current)Short-circuit protection IncorporatedResponse time 1 ms or lessOperation indicator Orange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type)Stability indicator Green LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type)Power indicator Green LED (lights up when the power is ON) (incorporated on the emitter)Sensitivity adjusterAutomatic interferenceprevention functionTwo units of sensors can be mounted close together with interference prevention ? lters. (Sensing range: 5 m 16.404 ft)Incorporated (Two units of sensors can be mounted close together.)Environmental resistanceProtection IP67 (IEC)Ambient temperature -25 to +55 °C -13 to +131 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °FAmbient humidity 35 to 85 % RH, Storage: 35 to 85 % RHAmbient illuminance Incandescent light: 3,000 ?x at the light-receiving faceVoltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosureInsulation resistance 20 M?, or more, with 250 V DC megger between all supply terminals connected together and enclosureVibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours eachShock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times eachEmitting element (modulated) Red LED Infrared LED Red LEDPeak emission wavelength 680 nm 0.027 mil 870 nm 0.034 mil 680 nm 0.027 milMaterial Enclosure: PBT (Polybutylene terephthalate), Lens: Acrylic, Indicator cover: AcrylicCable 0.2 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m 1.640 ft longCable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver)WeightNet Emitter: 20 g approx., Receiver: 20 g approx. 20 g approx.Gross 50 g approx. 30 g approx.Notes: 1) Where measurement conditions have not been speci? ed precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F. 2) The sensing range and the sensing object of the retrore?ective type sensor are speci?ed for the RF-230 re? ector (optional). The sensing range represents the actual sensing range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing object. Be sure to check the operation with the actual sensing object.Setting rangeof the reflector: BSensingobjectSensingrange: ASensor Reflector(Optional)CX-491??A 0 to 3 m 0 to 9.843 ftB 0.1 to 3 m0.328 to 9.843 ft 3) If slit masks (optional) are ?tted, an object of ø0.5 mm ø0.020 in (using round slit mask) can be detected.4) Make sure to con? rm detection with an actual sensor before use. SPECIFICATIONS Basic type18/07/201115 I/O CIRCUIT AND WIRING DIAGRAMS I/O circuit diagram+–12 to 24 V DC±10 %DTrZDZD 100 mA max.(Brown / 1) +V(Black / 4)Output (Note 1)Color code / Connector pin No. of the connector type(Blue / 3) 0 V*1LoadDUser’s circuitInternal circuit(Pink / 2) Sensing mode selection input (Note 2, 3)Sensor circuitNotes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX-44? adjustable range re? ective type. When using the CX-44?, be sure to wire the sensing mode selection input (pink / 2) as mentioned *1. Unstable operation may occur. 3) When the mating cable is connected to the plug-in connector type of CX-44?, its color is white.*1Sensing mode selection input•BGS function: Connect to 0 VFGS function: Connect to +VSymbols ... D : Reverse supply polarity protection diode ZD : Surge absorption zener diode Tr : NPN output transistorNPN output typeWiring diagram+*1–LoadBrownBlack (Note 1)BluePink (Note 2, 3)12 to 24 V DC±10 %Notes: 1) The emitter of the thru-beam type sensor does not incorporate the black wire. 2) The pink wire is incorporated only for the CX-44? adjustable range re? ective type. When using the CX-44?, be sure to wire the pink wire as mentioned *1. Unstable operation may occur. 3) When the mating cable is connected to the plug-in connector type of CX-44?, its color is white.*1Sensing mode selection input•BGS function: Connect to 0 VFGS function: Connect to +VConnector pin positionM8 plug-in connector type M12 pigtailed type2Sensing modeselection input(Note 2)4Output(Note 1)1+V30 V2Notconnected1+V30 V4Output (Note 1)Notes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX-44? adjustable range re? ective type. When using the CX-44?, be sure to wire the sensing mode selection input (pink / 2). Unstable operation may occur.PNP output typeI/O circuit diagramTr ZDZD 100 mA max.User’s circuitInternal circuitLoad(Brown / 1) +V(Black / 4) Output (Note 1)Color code / Connector pin No. of the connector type(Blue / 3) 0 VDD12 to 24 V DC±10 %*1+–(Pink / 2) Sensing mode selection input (Note 2, 3)Sensor circuitNotes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX-44?-P adjustable range re? ective type. When using the CX-44?-P, be sure to wire the sensing mode selection input (pink / 2) as mentioned *1. Unstable operation may occur. 3) When the mating cable is connected to the plug-in connector type of CX-44?-P, its color is white.*1Sensing mode selection input•BGS function: Connect to 0 VFGS function: Connect to +VSymbols ... D : Reverse supply polarity protection diode ZD : Surge absorption zener diode Tr : PNP output transistorWiring diagram+–*1LoadBrownBlack (Note 1)BluePink (Note 2, 3)12 to 24 V DC±10 %Notes: 1) The emitter of the thru-beam type sensor does not incorporate the black wire. 2) The pink wire is incorporated only for the CX-44?-P adjustable range re? ective type. When using the CX-44?-P, be sure to wire the pink wire as mentioned *1. Unstable operation may occur. 3) When the mating cable is connected to the plug-in connector type of CX-44?-P, its color is white.*1Sensing mode selection input•BGS function: Connect to 0 VFGS function: Connect to +VConnector pin position 2Sensing modeselection input(Note 2)4 Output (Note 1)1+V30 V2Notconnected1+V30 V4 Output (Note 1)M8 plug-in connector type M12 pigtailed typeNotes: 1) The emitter of the thru-beam type sensor does not incorporate the output. 2) Sensing mode selection input is incorporated only for the CX-44?-P adjustable range re? ective type. When using the CX-44?-P, be sure to wire the sensing mode selection input (pink / 2). Unstable operation may occur.18/07/201116Do not run the wires together with high-voltage lines or •power lines or put them in the same raceway.This can cause malfunction due to induction.Extension up to total 100 m • 328.084 ft (thru-beam type: both emitter and receiver) is possible with 0.3 mm2, or more, cable. However, in order to reduce noise, make the wiring as short as possible.Make sure that stress by forcible bend or pulling is not •applied directly to the sensor cable joint.OthersThis product has been developed / produced for industrial •use only.Do not use during the initial transient time (50 ms) after •the power supply is switched on.Take care that the sensor is not directly exposed to •? uorescent light from a rapid-starter lamp or a high frequency lighting device, as it may affect the sensing performance.This sensor is suitable for indoor use only.•Do not use this sensor in places having excessive vapor, •dust, etc., or where it may come in direct contact with water or corrosive gas.Take care that the sensor does not come in direct contact •with water, oil, grease or organic solvents, such as, thinner, etc.This sensor cannot be used in an environment containing •in? ammable or explosive gases.Never disassemble or modify the sensor.• PRECAUTIONS FOR PROPER USE Never use this product as a sensing device •for personnel protection.In case of using sensing devices for •personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country.MountingThe tightening torque should be 0.5 N·m or less.•Sensormountingbracket(Optional)M3 (length 12 mm 0.472 in)screw with washersWiringMake sure that the power supply is off while wiring.•Take care that wrong wiring will damage the sensor.•Verify that the supply voltage variation is within the rating.•If power is supplied from a commercial switching regulator, •ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground.In case noise generating equipment (switching regulator, •inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground.Notes: 1) Not incorporated on the emitter and the basic type sensor. 2) It is the power indicator (green) on the emitter. 3) Not incorporated on the emitter. 4) Basic type: 0.5 m 1.640 ft long.Notes: 1) Not incorporated on the emitter.2) It is the power indicator (green) on the emitter.2.30.09130.1183.95 0.1567.85 0.30911.80.465Beamaxis11.20.441Operation indicator (Orange)(Note 2)Stability indicator (Green)(Note 3)Sensitivity adjuster (Note 1)Operation mode switch (Note 1)3-core (emitter: 2-core)×0.2 mm2insulator diameter: ø1.2 ø0.04715.5 0.610ø3.7 ø0.146 cable, 2 m 6.562 ft long (Note 4)2-M3×0.5 0.020thru-hole threads( )200.787311.22025.41.000Operation indicator (Orange)(Note 2)Sensitivity adjuster (Note 1)3.95 0.1567.85 0.30911.80.4652.30.09130.118311.220Stability indicator (Green)(Note 1)Beamaxis11.20.441ø9.4ø0.370Operation mode switch (Note 1)M8 connector2-M3×0.5 0.020thru-hole threads200.787( )42.51.67325.41.00015.50.61035.51.398 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the website:panasonic-electric-works.net/sunxCX-41? Sensor CX-41?-Z Sensor18/07/201117 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the website:panasonic-electric-works.net/sunx3.95 0.1567.85 0.30911.80.465Operation indicator (Orange)(Note 2)Stability indicator (Green)(Note 1)Sensitivity adjuster (Note 1)Operation mode switch (Note 1)30.118200.7872.30.091 M12 connector311.22025.41.00015.5 0.610ø3.7 ø0.146 cableBeamaxis11.20.4412-M3×0.5 0.020thru-hole threads30011.811( )( )( )441.7323.95 0.1567.85 0.30911.80.465Operation indicator (Orange)Stability indicator (Green)Sensitivity adjuster (Note 1)Operation mode switch (Note 1)4 0.1572.30.09130.11811.20.441Beam-receivingpartCenter of sensing40.157Beam-emittingpart2-M3×0.5 0.020thru-hole threads ø3.7 ø0.146 cable,2 m 6.562 ft long (Note 2)200.787( )25.41.000311.22015.5 0.6103-core×0.2 mm2insulator diameter: ø1.2 ø0.047( )30.1182.30.09111.80.4657.85 0.3093.95 0.156Sensitivity adjusterOperation indicator (Orange)Stability indicator (Green) Operation mode switch25.41.00015.5 0.6102-M3×0.5 0.020thru-hole threadsCenter of sensingM8 connector11.20.441ø9.4ø0.370Beam-emittingpartBeam-receivingpart40.15740.15742.51.673200.78735.51.398311.220( )2.30.091200.78711.80.4657.85 0.3093.95 0.156Operation mode switchSensitivity adjusterOperation indicator (Orange)Stability indicator (Green)Center of sensing2-M3×0.5 0.020thru-hole threadsBeam-emittingpartBeam-receivingpart15.5 0.6104 0.15740.15711.20.441 30.118ø3.7 ø0.146 cableM12 connector( )441.732( )30011.811311.22025.41.00040.1578.20.32312.50.492Stability indicator (Green)Operation mode switchDistance adjuster (5-turn) Operation indicator (Orange)3 0.1180.90.035200.7872.80.11020.07911.20.4412-M3×0.5 0.020thru-hole threads220.866Beam-receiving partBeam-emitting partCenter of sensingø3.7 ø0.146 cable,2 m 6.562 ft long4-core × 0.2mm2insulator diameter: ø1.2 ø0.047311.22025.41.000220.866ø9.40.3702-M3×0.5 0.020thru-hole threads11.20.441Beam-receiving partBeam-emitting partCenter of sensing311.22025.41.00042.51.67335.51.3982.80.11020.079 3 0.1180.90.035M8 connector40.1578.20.32312.50.492Stability indicator (Green)Operation mode switchDistance adjuster (5-turn) Operation indicator (Orange)200.787CX-41?-J SensorCX-49?-Z CX-48?-Z CX-42?-Z SensorCX-44? SensorCX-49? CX-48? CX-42? SensorCX-49?-J CX-48?-J CX-42?-J SensorCX-44?-Z SensorNotes: 1) Not incorporated on the Bacic type sensors. 2) Basic type: 0.5 m 1.640 ft long.Notes: 1) Not incorporated on the emitter.2) It is the power indicator (green) on the emitter.18/07/201118Material: Acrylic (Reflector) ABS (Base)2-ø4.6 ø0.181mountingholes50.31.980401.5755 0.1978.30.3273.30.13010 0.39459.32.33549.31.941( )301.181Material: Acrylic (Reflector) ABS (Base)35.31.39042.31.66534.31.350250.9842-ø3.6 ø0.142mountingholes4 0.1578 0.3158.30.3273.30.130210.827( )Material: Acrylic (Reflector) ABS (Base)Two M3 (length 8 mm 0.315 in)screws with washers and two nuts are attached.33.31.311ReflectorM3 nut mounting holes(for mounting at the back)Base250.9843.20.126100.3942-ø3.4 ø0.134 thru-holes(for mounting at the side)(for mounting at the back)2-ø3.4 ø0.134 holes, 6 0.236 deep(for mounting at the side)2-M3 nut mounting holes12.8 0.50411 0.433Material: Acrylic80.315281.10260.236301.181AdhesivetapeEffectivereflecting surface0.70.028( )( )Material: Acrylic( )301.1810.70.028281.102250.984230.906AdhesivetapeEffectivereflecting surface( )0.50.020301.181301.181( )Reflective surface (Acrylic)Rear surface pressure-sensitiveadhesive DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the website:panasonic-electric-works.net/sunxAssembly dimensionsMounting drawing with the receiver of CX-41?Material: Stainless steel (SUS304)Two M3 (length 12 mm 0.472 in) screwswith washers are attached.3.40.1348 0.31514 0.55150.19730.1183.40.13414°10 0.3947°2-ø3.4 ø0.134 holes(for RF-210)3.40.13412.5 0.492t 1.2t 0.047120.472 R12R0.472220.866150.591200.787R25R0.984250.98442.51.673Beam axis9.50.374250.98412.3 0.484t 1.2t 0.04725.41.0000.30.0127°13.6 0.5353.40.1343.40.13450.19730.11814°120.4720.50.020311.220 42.51.673( )220.86625.20.992200.787R12R0.472RF-220 Re? ector (Optional) RF-210 Re? ector (Optional) RF-11 Re? ective tape (Optional) RF-12 Re? ective tape (Optional) RF-13 Re? ective tape (Optional) MS-CX2-1 Sensor mounting bracket (Optional) RF-230 Re? ector (Accessory for the retrore? ective type sensor)18/07/201119 DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the website:panasonic-electric-works.net/sunxAssembly dimensionsMounting drawing with the receiver of CX-41?Assembly dimensionsMounting drawing with the receiver of CX-41?Material: Stainless steel (SUS304)Two M3 (length 12 mm 0.472 in) screwswith washers are attached.15.80.622t 2t 0.079 5 0.1974.50.1774.50.17714°7.80.3074.5 0.1774 0.157120.4727.80.3077 0.276230.906100.3948-ø3.4 ø0.134holesR12 R0.472140.55170.276140.551361.417552.16522 0.866250.98415.50.610( )Beam axis15.80.6228.20.323t 2t 0.0793.60.14240.157140.5514.50.1774.50.177120.472 5 0.19714°R12 R0.4727 0.2764.5 0.17740.1578.2 0.323281.102552.165361.417220.86625.41.00015.50.610Material: Stainless steel (SUS304)Two M3 (length 14 mm 0.551 in) screwswith washers are attached.3.40.1343.40.13440.1577°14°ø25 ø0.984 R25R0.984SENSOR180.709130.512 t 2.5t 0.0986.20.244R9.5R0.374SENSOR291.142190.7485.50.2175.50.21760.23670.27620°40°ø55 ø2.165ø39 ø1.535250.984250.984250.984190.748461.811SENSORSENSOR20°40°70.2760.90.035130.512 11.20.4410.90.03512.3 0.484250.984 t 2.5 t 0.098Beam axis461.811 SENSORSENSORø55 ø2.165ø39 ø1.535291.142180.70925.41.000Assembly dimensionsMounting drawing with the receiver of CX-41?Material: Stainless steel (SUS304)Two M3 (length 12 mm 0.472 in) screwswith washers are attached.3.40.1343.40.1343.50.1386.5 0.2565 0.1977°150.591 t 1.5t 0.05980.31550.1977.90.31170.276451.77218.90.744371.457200.787190.748250.984R19R0.748R25R0.984190.748t 1.5t 0.05925.41.000Beam axis7° R25R0.98470.276200.7876.5 0.2565 0.19750.1977.9 0.31120.60.81126.21.031451.77218.90.744371.457150.591 MS-CX2-2 Sensor mounting bracket (Optional) MS-CX2-4 Sensor mounting bracket (Optional) MS-CX2-5 Sensor mounting bracket (Optional)18/07/201120Material: Stainless steel (SUS304)Two M3 (length 12 mm 0.472 in) screws with washers are attached.t 1.2t 0.04720.50.8073.50.1383.40.1343.40.13410°R25R0.98450.1973.40.13410°50.197150.591140.55180.315 3.40.13460.2368.50.33560.23630 1.181351.378250.984180.709R25R0.984Assembly dimensionsMounting drawing with the receiver of CX-41?13.60.5353.40.134 80.315140.55160.2369 0.3548.50.335180.709Beam axis0.50.0203.50.1384.80.189t 1.2t 0.0470.30.01210°25.20.99211.20.4416 0.236311.220301.18125.41.000351.378( )200.787Assembly dimensionsMaterial: Stainless steel (SUS304)Two M3 (length 12 mm 0.472 in) screws with washers are attached.12.5 0.492t 1.2t 0.047130.512ø25ø0.984160.630100.3943.50.1383.20.126R7.5R0.295250.984461.81120°230.906501.9695.50.217ø36ø1.41730°461.811 250.984130.512100.39420°501.969ø36ø1.41730°230.9065.50.217DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the website:panasonic-electric-works.net/sunxAssembly dimensionsMaterial: Cold rolled carbon steel (SPCC) (Uni-chrome plated)Two M3 (length 8 mm 0.315 in) screws with washers are attached.4.50.177100.394110.433250.984351.37840.15716 0.63010 0.3946 0.2368 0.315441.732200.787t 1.6t 0.0638-M3×0.5 0.020thru-hole threads250.9844.50.177250.984100.394 28.31.1148.30.32734.31.3508 0.31540.157210.82735.31.39044.31.74460.236271.063t 1.6t 0.06319.30.760( ) ( ) MS-CX-3 Sensor mounting bracket (Optional) MS-RF21-1 Re? ector mounting bracket for RF-210 (Optional)MS-RF22 Re? ector mounting bracket for RF-220 (Optional)18/07/201121DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the website:panasonic-electric-works.net/sunxAssembly dimensionsMaterial: Cold rolled carbon steel (SPCC) (Uni-chrome plated)Two M4 (length 10 mm 0.394 in) screws with washers are attached.401.575 4.50.17730.118 100.394 110.433501.969401.5755 0.19716 0.63015 0.59118 0.7097 0.276200.787t 2t 0.0798-M4×0.7 0.028 thru-hole threads261.024120.472351.37830.118612.402( )( ) 281.102( )401.5754.50.17728.31.11419.30.7608.30.327100.39450.31.98049.31.94150.197t 2t 0.079100.394301.18161.32.41370.276371.457401.575( )( )25.51.004100.3942-ø6.6 ø0.260 mounting holes451.772321.260Base(PA)80.315180.709200.787281.102200.7871 0.039200.78710.039250.984331.29917.80.701 120.47211.80.46544.51.7522188.5831475.787281.10245°45°t 2t 0.0796 0.23620 0.787Attachment(Nylon 6) M4 hexagon-socket-headbolt2-ø3.2 ø0.126mounting holes2-3.2 0.126×4.2 0.165oblong holesø10 ø0.394 pipe[Stainless steel (SUS304)]Sensor mounting bracket[Stainless steel (SUS304)]Cable guide(POM)4.2 0.1653.20.126(Note)40.157200.787( )( )( )Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.11.80.46520 0.78717.80.701 120.472t 2t 0.0792-ø3.2 ø0.126mounting holes2-3.2 0.126×4.2 0.165oblong holes45°45°4.2 0.1653.20.126M4 hexagon-socket-headbolt1 0.03910.039200.787250.984331.299200.787Attachment(Nylon 6)Sensor mounting bracket[Stainless steel (SUS304)]ø10 ø0.394 pipe[Stainless steel (SUS304)]2-ø6.6 ø0.260mounting holesBase(PA)321.260461.811200.78780.315150.591311.220200.78736.51.437( )( )( )1475.787 (Note)Cable guide(POM) 100.39424.50.965200.7872108.268281.1026 0.23640.157Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.Note: The dimensions in the brackets indicate the adjustable range of the movable part.Note: The dimensions in the brackets indicate the adjustable range of the movable part.Assembly dimensions with CX-400 series (Mounting part only)Assembly dimensions with RF-210 (Re? ector) (Mounting part only)200.78711.80.465331.299200.787281.102271.06317.60.69345°45°t 2t 0.07960.236Center of sensing2-M3 (length14 mm 0.551 in)screws with washers4.20.16525.41.00023.20.913 18.40.72424.80.97645°45°t 2t 0.079250.98433.31.31131.81.252200.7872-M3 (length14 mm 0.551 in)screws with washers4.20.165200.78711.80.46560.236331.299MS-RF23 Re? ector mounting bracket for RF-230 (Optional)MS-AJ1 Universal sensor mounting stand (Optional) MS-AJ2 Universal sensor mounting stand (Optional)18/07/201122DIMENSIONS (Unit: mm in) The CAD data in the dimensions can be downloaded from the website:panasonic-electric-works.net/sunx( )( )( )( )( )( )25.51.004100.3942-ø6.6 ø0.260 mounting holes451.772321.260Base(PA)80.315180.709200.787281.10228.451.120120.47216.50.6501475.787(Note 1)44.51.752203.58.0121345.276 (Note 1) 331.2992108.26816.50.650331.2996 0.2362188.5832-ø3.2 ø0.126mounting holesArm joint(Nylon 6)ø10 ø0.394 pipe[Stainless steel (SUS304)]ø10 ø0.394 pipe[Stainless steel (SUS304)]2-3.2 0.126×4.2 0.165oblong holesCable guide(POM)Sensor mounting bracket[Stainless steel (SUS304)] (Note 2)4.20.165( )Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in) screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.( )( )( )( ) ( )( )( )24.50.965321.260461.811Base(PA)311.220150.59180.315100.394200.7872-ø6.6 ø0.260mounting holes28.451.120120.47216.50.6501475.787(Note 1)36.51.437208.58.2091345.276 (Note 1)331.2992108.26816.50.650331.2996 0.2362108.268200.7872-ø3.2 ø0.126mounting holesArm joint(Nylon 6)ø10 ø0.394 pipe[Stainless steel (SUS304)]ø10 ø0.394 pipe2-3.2 0.126×4.2 0.165oblong holesCable guide(POM)Sensor mounting bracket[Stainless steel (SUS304)] (Note 2)4.20.165 [Stainless steel (SUS304)]Two M3 (length 14 mm 0.551 in) screws with washers, two M3 (length 16 mm 0.630 in) screws with washers, two M3 (length 18 mm 0.709 in)screws with washers, one auxiliary mounting plate for EQ-20 series and one auxiliary mounting plate for EX-40 series are attached.Assembly dimensions with RF-220 (Re? ector) (Mounting part only)Assembly dimensions with RF-230 (Re? ector) (Mounting part only)Two M3 (length 8 mm 0.315 in)screws with washers and two M4 (length 8 mm 0.315 in) screws with washers are attached.(Note)1475.787180.709281.10211.80.46525.51.004100.394321.2602-ø6.6 ø0.260 mounting holesø10 ø0.394 pipe[Stainless steel (SUS304)]80.315451.772200.787Base(PA)200.787281.1022-M4250.98445°45°Attachment(Nylon 6)2-M3 t 2 t 0.079220.866170.669M4 hexagon-socket-head bolt2088.189501.969401.57544.51.7524.20.165( ) ( )( )t 2t 0.079M4 hexagon-socket-head bolt200.78711.80.465281.10245.31.783281.10245°45°36.31.429200.7872-M3 (length 8 mm 0.315 in)screws with washers55.32.177381.496120.472501.9694.20.16535.31.390Two M3 (length 8 mm 0.315 in)screws with washers and two M4 (length 8 mm 0.315 in) screws with washers are attached.220.866 2-M4250.98411.80.465 170.669M4 hexagon-socket-head bolt2-M3 t 2 t 0.07945°45°281.102200.787Attachment(Nylon 6)ø10 ø0.394 pipe[Stainless steel (SUS304)](Note)321.26024.50.965311.220150.59180.315461.811Base(PA)100.394200.7872-ø6.6 ø0.260mounting holes200.7872007.874143.55.650401.575501.9694.20.165401.575( )( )( )11.80.46571.32.807200.78745°45°t 2t 0.0792-M4 (length 8 mm 0.315 in)screws with washers281.10236.31.429200.787M4 hexagon-socket-head bolt471.85050.31.980371.45761.32.4134.20.165MS-AJ1-A Universal sensor mounting stand (Optional)MS-AJ1-M Universal sensor mounting stand (Optional) MS-AJ2-M Universal sensor mounting stand (Optional)MS-AJ2-A Universal sensor mounting stand (Optional)Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. 2) Refer to MS-AJ1 / MS-AJ2 for the assembly dimensions with the sensor mounting bracket, sensor or re? ector.Notes: 1) The dimensions in the brackets indicate the adjustable range of the movable part. 2) Refer to MS-AJ1 / MS-AJ2 for the assembly dimensions with the sensor mounting bracket, sensor or re? ector.Note: The dimensions in the brackets indicate the adjustable range of the movable part.Note: The dimensions in the brackets indicate the adjustable range of the movable part.18/07/2011Protecting the environment is one of our guiding business principlesISO 14001 environmental management system certification acquiredOur Nagoya Head Office and Factory acquired ISO 14001 certification in September 1999.Now and into the future, we will continuously improve environmental management systems based on our Environment Policy, which focuses on the promotion of environmentally friendly business activities and product development.Promoting a totally lead-free working environmentWe are now working to eliminate the use of lead in all our in-house manufacturing processes such as in reflow ovens, hand soldering and parts and substrates procurement.Using simple packagingSimple, environmentally friendly packaging material reduces waste.Please contact .......... Panasonic Electric Works SUNX Co., Ltd.2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan¦Telephone: +81-568-33-7211 ¦Facsimile: +81-568-33-2631Overseas Marketing Department¦Telephone: +81-568-33-7861 ¦Facsimile: +81-568-33-8591panasonic-electric-works.net/sunxAll Rights Reserved ©Panasonic Electric Works SUNX Co., Ltd. 2010Sped?cations are subject to change without notice. Printed in JapanNo. CE-CX400-2-3 November, 201018/07/2011