Model e-HM - Horizontal Multistage Centrifugal Pump Brochure

CEA-CA SeriesCEA(N)-CA(N) made of AISI 316SINGLE AND TWIN-IMPELLER CENTRIFUGAL ELECTRIC PUMPSEQUIPPED WITH IE2/IE3 MOTORS COMPLYING WITH REGULATION (EC) n. 640/200960 Hz60 Hz60 Hz60 Hz60 HzCCCCCod.od.od.od.od. 191013651 R 191013651 R 191013651 R 191013651 R 191013651 Revevevevev.B Ed.06/2012.B Ed.06/2012.B Ed.06/2012.B Ed.06/2012.B Ed.06/20122CEA-CA - CEA(N)-CA(N) SERIESCEA-CA - CEA(N)-CA(N) SERIESCEA-CA - CEA(N)-CA(N) SERIESCEA-CA - CEA(N)-CA(N) SERIESCEA-CA - CEA(N)-CA(N) SERIESHYDRAHYDRAHYDRAHYDRAHYDRAULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AT 60 HzT 60 HzT 60 HzT 60 HzT 60 Hz3CEA-CEA(N) Series Specifications .........................................................................................................55555List of Models and Table of Materials CEA-CEA(N) Series ......................................................................77777Mechanical Seal CEA-CEA(N) Series .....................................................................................................88888Hydraulic Performance Table and Electrical Data CEA-CEA(N) Series ....................................................99999Hydraulic Performance Range CEA-CEA(N) Series at 60 Hz ..........................................................1212121212Dimensions and Weights CEA-CEA(N) Series ................................................................................1717171717CA-CA(N) Series Specifications .....................................................................................................1919191919List of Models and Table of Materials CA-CA(N) Series .................................................................2121212121Mechanical Seal CA-CA(N) Series .................................................................................................2222222222Hydraulic Performance Table and Electrical Data CA-CA(N) Series .................................................2323232323Hydraulic Performance Range CA-CA(N) Series at 60 Hz ..............................................................2626262626Dimensions and Weights CA-CA(N) Series ...................................................................................3030303030Technical Appendix ......................................................................................................................3131313131CONTENTSCONTENTSCONTENTSCONTENTSCONTENTS45Single-Single-Single-Single-Single-ImpellerImpellerImpellerImpellerImpellerCentrifugalCentrifugalCentrifugalCentrifugalCentrifugalElectricElectricElectricElectricElectricPumpsPumpsPumpsPumpsPumpsMMMMMARKET SECTORSARKET SECTORSARKET SECTORSARKET SECTORSARKET SECTORSCIVIL, AGRICULTURAL, INDUSTRIAL.CEA-CEA(N)CEA-CEA(N)CEA-CEA(N)CEA-CEA(N)CEA-CEA(N)60 Hz Series60 Hz Series60 Hz Series60 Hz Series60 Hz SeriesAPPLICAAPPLICAAPPLICAAPPLICAAPPLICATIONSTIONSTIONSTIONSTIONSVVVVVersion made of AISI 304ersion made of AISI 304ersion made of AISI 304ersion made of AISI 304ersion made of AISI 304• Handling of chemically and mechanically non- aggressive water and liquids (*).• Water supply.• Irrigation.• Water circulation (cold, hot, refrigerated).* For moderately aggressive liquids, a version with FPM elastomers is available (CEA../..V). For very aggressive liquids, please contact our sales network. On request “N” V On request “N” V On request “N” V On request “N” V On request “N” Version made of AISI 316ersion made of AISI 316ersion made of AISI 316ersion made of AISI 316ersion made of AISI 316 (for aggressive liquids) (for aggressive liquids) (for aggressive liquids) (for aggressive liquids) (for aggressive liquids)• Reverse osmosis (where demineralized water is used).• Industrial washing.• Thermal waters.• Chlorine dispensing in swimming pools.• Jewellary industry.• Wine production.SPECIFICASPECIFICASPECIFICASPECIFICASPECIFICATIONSTIONSTIONSTIONSTIONSPUMPPUMPPUMPPUMPPUMP• DeliveryDeliveryDeliveryDeliveryDelivery: up to 540 l/min (32 m3/h).• HeadHeadHeadHeadHead: up to 46 m.• TTTTTemperatureemperatureemperatureemperatureemperature of pumped liquid: -10°C to 85°C standard version. -10°C to +110°C (N and V versions).• MaximumMaximumMaximumMaximumMaximum operating pressure: 8 bar (PN 8).• Counterclockwise rotation facing the pump from the suction port.MOTORMOTORMOTORMOTORMOTOR• Asynchronous, squirrel cage rotor, closed construction, external ventilation.• Protection classProtection classProtection classProtection classProtection class: IP55.• InsulationInsulationInsulationInsulationInsulation: Class 155 (F).• Performances to EN 60034-1 specification.• Standard voltageStandard voltageStandard voltageStandard voltageStandard voltage: Single-phase Single-phase Single-phase Single-phase Single-phase versions: 220-230 V, 60 Hz, 2 poles, with automatic reset overload protection? Standard suppliedStandard suppliedStandard suppliedStandard suppliedStandard supplied IE2/IE3 motors IE2/IE3 motors IE2/IE3 motors IE2/IE3 motors IE2/IE3 motors are compliant with are compliant with are compliant with are compliant with are compliant with Regulation (EC) Regulation (EC) Regulation (EC) Regulation (EC) Regulation (EC) no. 640/2009 no. 640/2009 no. 640/2009 no. 640/2009 no. 640/2009. up to 1,5 kW. For higher powers, the overload protection must be provided and installed by the user in the control panel. Three-phase Three-phase Three-phase Three-phase Three-phase version: 220-230/380-400 V, 60 Hz, 2 poles, the overload protection must be provided and installed by the user in the control panel.• Condensate drain plug in the standard version.CONTRUCTIONCONTRUCTIONCONTRUCTIONCONTRUCTIONCONTRUCTIONCHARACTERISTICCHARACTERISTICCHARACTERISTICCHARACTERISTICCHARACTERISTICSSSSS• Close-coupled, single-impeller centrifugal pump featuring axial suction and radial discharge.• Compact construction, with pump coupled directly to motor; special motor shaft extension supported by ball bearings.• Rotating assembly has back pull-out design, no need to disconnect the pump body from the pipe line.• Threaded suction and discharge ports (Rp ISO 7).• High performance closed impellerimpellerimpellerimpellerimpeller made of AISI 304 stainless steel.• Mechanical sealMechanical sealMechanical sealMechanical sealMechanical seal with ceramic/carbon rings, NBR elastomers, other parts are made of AISI 304 stainless steel. Mounting dimensions according to EN 12756 (ex DIN 24960) and ISO 3069.• NBR ONBR ONBR ONBR ONBR O-rings-rings-rings-rings-rings• Mounting pedestal.OPTIONALOPTIONALOPTIONALOPTIONALOPTIONALFEAFEAFEAFEAFEATURESTURESTURESTURESTURES• Different voltages and frequencies.• Different materials for the mechanical seal and O-rings.6CEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESIDENTIFICAIDENTIFICAIDENTIFICAIDENTIFICAIDENTIFICATION CODETION CODETION CODETION CODETION CODEEXAMPLE : CEAM 1206/5-VCEA series electric pump, single-phase, flow rate 120 l/min60 Hz, Impeller size 5, FPM version.RARARARARATING PLATING PLATING PLATING PLATING PLATETETETETE LEGENDLEGENDLEGENDLEGENDLEGENDSINGLE-PHASESINGLE-PHASESINGLE-PHASESINGLE-PHASESINGLE-PHASETHREE-PHASETHREE-PHASETHREE-PHASETHREE-PHASETHREE-PHASE 1 - Electric pump type 2 - Code 3 - Delivery range 4 - Head range 5 - Electrical data 6 - Serial number (date + sequential number) 8 - Minimum head11 - Rated power12 - Electric pump protection class13 - Maximum temperature of pumped liquidCEA M 120 6 /IMPELLER SIZEFPM VERSION5 V6 = 60 HzNULL = 50 HzSERIES NAMEFLOW RATE IN l/minM = SINGLE-PHASENULL = THREE-PHASE-NVERSION MADE OF AISI 316/_NULL ORLETTER ASSIGNED BY THE MANUFACTURER7MATERIALI CEA70-CEA80-CEA120-CEA210-CEA370REF. PART MATERIALN. EUROPE USA1 Pump body Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3042 Impeller Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3043 Diffuser Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3044 Seal housing Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3045 Adapter Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) -12 Mechanical seal13 Elastomers16 Fill/drain plugs Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 31626 Impeller lock nut Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 31627 Mounting pedestal28 Pump body fastening nuts and bolts29 Shaft extension Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 316cea-cea-en_b_tmREFERENCE STANDARDS NBR (standard version) Ceramic / Carbon / NBR (standard version) Zinc-plated steel Painted steelMATERIALI CEA70N-CEA80N-CEA120N-CEA210N-CEA370NREF. PART MATERIALN. EUROPE USA1 Pump body Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L2 Impeller Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L3 Diffuser Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L4 Seal housing Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L5 Adapter Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) -12 Mechanical seal13 Elastomers16 Fill/drain plugs Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 31626 Impeller lock nut Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 31627 Mounting pedestal28 Pump body fastening nuts and bolts29 Shaft extension Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 316cea-ceaN-en_a_tmREFERENCE STANDARDS EPDM Ceramic / Carbon /EPDM Zinc-plated Painted steelCEA - CEA(N) SERIESCEA - CEA(N) SERIESCEA - CEA(N) SERIESCEA - CEA(N) SERIESCEA - CEA(N) SERIESLIST OF MODELS AND TLIST OF MODELS AND TLIST OF MODELS AND TLIST OF MODELS AND TLIST OF MODELS AND TABLE OF MAABLE OF MAABLE OF MAABLE OF MAABLE OF MATERIALSTERIALSTERIALSTERIALSTERIALS DENOMINAZIONE MODELSERIE CEA VERSIONSCEA706/3CEA706/4CEA706/5CEA1206/1CEA1206/2CEA1206/3CEA1206/4CEA1206/5CEA2106/0CEA2106/1CEA2106/2CEA2106/3CEA2106/4CEA3706/0CEA3706/0ACEA3706/1CEA3706/2CEA3706/3cea-ceaN-2p60-en_b_moCEA SERIES TCEA SERIES TCEA SERIES TCEA SERIES TCEA SERIES TABLE OF MAABLE OF MAABLE OF MAABLE OF MAABLE OF MATERIALSTERIALSTERIALSTERIALSTERIALSCEA(N) SERIES TCEA(N) SERIES TCEA(N) SERIES TCEA(N) SERIES TCEA(N) SERIES TABLE OF MAABLE OF MAABLE OF MAABLE OF MAABLE OF MATERIALS (ON REQUEST)TERIALS (ON REQUEST)TERIALS (ON REQUEST)TERIALS (ON REQUEST)TERIALS (ON REQUEST)8CEA-CEA(N) MECHANICAL SEAL, ACCORDING TO EN 12756CEA-CEA(N) MECHANICAL SEAL, ACCORDING TO EN 12756CEA-CEA(N) MECHANICAL SEAL, ACCORDING TO EN 12756CEA-CEA(N) MECHANICAL SEAL, ACCORDING TO EN 12756CEA-CEA(N) MECHANICAL SEAL, ACCORDING TO EN 12756Mechanical seal with mounting dimensions according to EN12756 (ex DIN 24960) and ISO 3069.CEA-CEA(N) LIST OF MACEA-CEA(N) LIST OF MACEA-CEA(N) LIST OF MACEA-CEA(N) LIST OF MACEA-CEA(N) LIST OF MATERIALSTERIALSTERIALSTERIALSTERIALS TENUTA MECCANICA CEA COMBINAZIONITEMPERATURE1 2 3 4 5ROTATING ASSEMBLYROTATING ASSEMBLY FIXED ASSEMBLYFIXED ASSEMBLY ELASTOMERSELASTOMERS SPRINGSSPRINGS OTHER COMPONENTSOTHER COMPONENTSV B P GFB P GF V B P G F -10 +85VBEGGVBEGG V B E G G -10 +110VCEGGVCEGG V C E G G -10 +110Q1Q1EGGEGG Q1 Q1 E GE G G -10 +110U3CEGGCEGG U3 C EC E G G -10 +110U3U3EGGEGG U3 U3 E GE G G -10 +110VBVGGVBVGG V B V G G -10 +110VCVGGVCVGG V C V G G -10 +110Q1Q1VGGVGG Q1 Q1 V GV G G -10 +110U3CVGGCVGG U3 C V G G -10 +110U3U3VGGVGG U3 U3 V GV G G -10 +110cea_tipi-ten-mec_b_tcTYPESTANDARD MECHANICAL SEALSTANDARD MECHANICAL SEALOTHER TYPES OF MECHANICAL SEALOTHER TYPES OF MECHANICAL SEALPOSITION( °C ) TENUTA MECCANICA CEA-CA MATERIALI B : Resin impregnated carbon P P : NBR FF : AISI 304 C : Special resin impregnated carbon E E : EPDM G G : AISI 316 Q1 : Silicon carbide V : FPM U3 : Tungsten carbide V : Ceramic cea-ca_ten-mec-en_b_tmPOSITION 1 - 2 POSITION 3 POSITION 4 - 5CEA MECHANICAL SEALSCEA MECHANICAL SEALSCEA MECHANICAL SEALSCEA MECHANICAL SEALSCEA MECHANICAL SEALSCEA-CEA(N)CEA-CEA(N)CEA-CEA(N)CEA-CEA(N)CEA-CEA(N) TENUTA MECCANICA CEA (N)-CA (N) COMBINAZIONITEMPERATURE1 2 3 4 5ROTATING ASSEMBLYROTATING ASSEMBLY FIXED ASSEMBLYFIXED ASSEMBLY ELASTOMERSELASTOMERS SPRINGSSPRINGS OTHER COMPONENTSOTHER COMPONENTSV B E G GB E G G V B E G G G -10 +110V C E G GC E G G V C E G G G -10 +110Q1 Q1 E G G E G G Q1 Q1 E G G G -10 +110V C V G GC V G G V C V G G G -10 +110Q1 Q1 V G G V G G Q1 Q1 V G G G -10 +110cean-can_tipi-ten-mec-en_b_tcTYPESTANDARD MECHANICAL SEALSTANDARD MECHANICAL SEALOTHER TYPES OF MECHANICAL SEALOTHER TYPES OF MECHANICAL SEALPOSITION( °C )CEA(N) CEA(N) CEA(N) CEA(N) CEA(N) MECHANICAL SEALSMECHANICAL SEALSMECHANICAL SEALSMECHANICAL SEALSMECHANICAL SEALS9DATI ELETTRICI SERIE CEA 2 poli 60 HzMOTOR INPUT INPUT CAPACIT. MOTOR INPUT INPUT INPUTTYPE POWER* CURRENT* TYPE POWER* CURRENT* CURRENT*220-230 V 220-230 V 380-400 VkW A µF / 450 V kW A ACEAM706/3 SM71BG/1076 0,96 4,39 20 CEA706/3 SM80BG/307PE 0,84 2,89 1,67CEAM706/4 SM71BG/1096 1.30 5,91 25 CEA706/4 SM80BG/311PE 1,17 3,98 2,30CEAM706/5 SM80BG/1116 1,54 7,13 30 CEA706/5 SM80BG/311PE 1,46 4,61 2,66CEAM1206/1 SM71BG/1056 0,84 3,87 16 CEA1206/1 SM71BG/305 0,74 2,36 1,36CEAM1206/2 SM71BG/1076 1,05 4,79 20 CEA1206/2 SM80BG/307PE 0,94 3,11 1,79CEAM1206/3 SM71BG/1096 1,39 6,31 25 CEA1206/3 SM80BG/311PE 1,27 4,19 2,42CEAM1206/4 SM80BG/1156 1,85 8,71 40 CEA1206/4 SM80BG/315PE 1,71 5,51 3,18CEAM1206/5 PLM90BG/1226 2,24 10,6 60 CEA1206/5 PLM90BG/322 2,23 7,37 4,26CEAM2106/0 SM71BG/1076 1,06 4,85 20 CEA2106/0 SM80BG/307PE 0,95 3,13 1,81CEAM2106/1 SM80BG/1116 1,50 6,98 30 CEA2106/1 SM80BG/311PE 1,40 4,47 2,58CEAM2106/2 SM80BG/1156 1,90 8,87 40 CEA2106/2 SM80BG/315PE 1,74 5,58 3,22CEAM2106/3 PLM90BG/1226 2,28 10,7 60 CEA2106/3 PLM90BG/322 2,27 7,46 4,31CEAM2106/4 PLM90BG/1226 2,91 13,5 60 CEA2106/4 PLM90BG/322 2,95 9,11 5,26CEAM3706/0 SM80BG/1116 1,54 7,15 30 CEA3706/0 SM80BG/311PE 1,45 4,59 2,65CEAM3706/0A SM80BG/1156 1,97 9,19 40 CEA3706/0A SM80BG/315PE 1,84 5,83 3,36CEAM3706/1 PLM90BG/1226 2,41 11,3 60 CEA3706/1 PLM90BG/322 2,42 7,79 4,50CEA3706/2 PLM90BG/330 3,21 10,1 5,85CEA3706/3 PLM90BG/330 3,92 11,9 6,89* Maximum value in specified range cea-2p60-en_e_tePUMP TYPESINGLE PHASEPUMP TYPETHREE PHASECEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESHYDRAHYDRAHYDRAHYDRAHYDRAULIC PERFORMANCE TULIC PERFORMANCE TULIC PERFORMANCE TULIC PERFORMANCE TULIC PERFORMANCE TABLE AABLE AABLE AABLE AABLE AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLESTABELLA DI PRESTAZIONI IDRAULICHE SERIE CEA 2 poli 60 HzPUMP TYPEl/min 0l/min 0 20 30 40 60 80 120 140 160 180 240 300 320 380380 420420 460460 500500 540540m3/h 0 1,21,2 1,81,8 2,4 3,6 4,8 7,2 8,4 9,6 10,8 14,4 18 19,2 22,822,8 25,225,2 2828 3030 32kW HPCEA(M) 706/3 0,75 1 32,3 30,7 30,0 29,2 27,0 23,5CEA(M) 706/4 0,9 1,2 39,2 37,5 36,6 35,7 33,4 29,9CEA(M) 706/5 1,1 1,5 45,2 43,3 42,4 41,4 38,6 34,4CEA(M) 1206/1 0,55 0,75 22,1 19,1 17,7 14,4 12,2 9,8CEA(M) 1206/2 0,75 1 27,8 24,1 22,6 19,1 16,9 14,3CEA(M) 1206/3 0,9 1,2 32,8 29,1 27,7 24,1 22,0 19,6CEA(M) 1206/4 1,5 2 40,5 36,3 34,6 30,6 28,2 25,4CEA(M) 1206/5 1,85 2,5 46,6 42,2 40,4 36,0 33,4 30,6 27,4CEA(M) 2106/0 0,75 1 17,0 15,9 15,5 14,9 14,3 11,9 8,8CEA(M) 2106/1 1,1 1,5 21,1 20,4 20,0 19,5 19,0 16,9 14,0CEA(M) 2106/2 1,5 2 25,3 24,5 24,1 23,7 23,2 21,3 18,7CEA(M) 2106/3 1,85 2,5 30,0 29,4 29,1 28,8 28,3 26,7 24,3 23,3CEA(M) 2106/4 2,2 3 34,8 34,3 34,0 33,6 33,2 31,5 28,9 27,9CEA(M) 3706/0 1,1 1,5 16,9 15,9 15,6 14,4 12,8 12,2 10,0CEA(M) 3706/0A 1,5 2 19,8 19,4 19,2 18,4 17,2 16,7 14,6 12,9CEA(M) 3706/1 1,85 2,5 23,5 22,9 22,6 21,7 20,3 19,8 17,8 16,3 14,5CEA 3706/2 3 4 29,6 29,0 28,8 27,9 26,6 26,1 24,2 22,7 21,0 19,0CEA 3706/3 3 4 35,0 33,0 32,7 31,6 30,2 29,7 27,9 26,5 24,9 23,0 20,9cea-2p60-en_c_thH = TOTAL HEAD METRES COLUMN OF WATERQ = DELIVERYRATEDPOWERCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESELECTRICAL DAELECTRICAL DAELECTRICAL DAELECTRICAL DAELECTRICAL DATTTTTA AA AA AA AA AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES10MOTORI TRIFASE PER SERIE CEA Ie2 60 Hz, 2 poli PNkW 4/4 3/4 2/4 4/4 3/4 2/4 4/4 3/4 2/4 4/4 3/4 2/40,55 - - - - - - - - - - - - -0,75 83,4 82,4 79,0 83,4 82,4 79,0 83,4 82,4 79,0 83,4 82,4 79,00,9 85,6 85,0 82,1 85,6 85,0 82,1 85,6 85,0 82,1 85,6 85,0 82,11,1 85,6 85,0 82,1 85,6 85,0 82,1 85,6 85,0 82,1 85,6 85,0 82,11,5 87,2 87,0 84,6 87,2 87,0 84,6 87,2 87,0 84,6 87,2 87,0 84,61,85 85,5 85,5 84,5 85,5 85,5 84,5 85,5 85,5 84,5 85,5 85,5 84,52,2 85,5 85,5 84,5 85,5 85,5 84,5 85,5 85,5 84,5 85,5 85,5 84,53 87,8 88,0 86,0 87,8 88,0 86,0 87,8 88,0 86,0 87,8 88,0 86,0PN fN TNkW Hz cos? ls / lN Nm Ts/TN Tm/Tn0,55 71 0,84 5,83 1,55 3,09 2,770,75 80 0,79 8,25 2,05 3,80 4,020,9 80 0,80 9,11 3,01 4,15 4,291,1 80 0,80 9,11 3,01 4,15 4,291,5 80 0,82 9,79 4,10 4,36 4,371,85 90 0,83 9,59 6,00 3,80 4,022,2 90 0,83 9,59 6,00 3,80 4,023 90 0,84 9,12 8,22 3,52 3,65Altitudine T. amb ATEXPN 220 V 230 V 380 V 400 V 380 V 400 V 660 V 690 V s.l.m. min/maxkW m °C0,55 2,37 2,30 1,37 1,33 - - - -0,75 3,03 3,01 1,75 1,74 1,75 1,74 1,01 1,000,9 4,24 4,24 2,45 2,45 2,44 2,43 1,41 1,401,1 4,24 4,24 2,45 2,45 2,44 2,43 1,41 1,401,5 5,58 5,53 3,22 3,19 3,23 3,22 1,86 1,861,85 8,14 8,12 4,70 4,69 4,69 4,68 2,71 2,702,2 8,14 8,12 4,70 4,69 4,69 4,68 2,71 2,703 10,7 10,5 6,19 6,06 6,20 6,11 3,58 3,53Note: Observe the regulations and codes locally in force regarding sorted waste disposal. cea-ie2-mott-2p60-en_b_te** Operating conditions to be referred to motor only. About electric pump, refer to limits in user’s manual.323380 ÷ 34153490 ÷ 3500Data for 380 V / 60 HzSee note.NoOperating conditions **? 1000-15 / 40SM80BG /311 PESM80BG /315 PEPLM90BG /322PLM90BG /322Construction DesignIEC SIZELowara srl UnipersonaleReg. No. 341820260Montecchio Maggiore Vicenza - ItaliaModelN. of Poles?? 380 VY 380 V2 60Y 660 VY 400 VYManufacturernN3490 ÷ 35053480 ÷ 3495By June 20113495 ÷ 35053490 ÷ 35053485 ÷ 35053495 ÷ 3505min-1Efficiency ?NY 690 V Year of construction%? 220 V ? 230 V ? 400 VIEIN (A)SPECIAL? YVoltage UNVPLM90BG /330SM71BG /305SM80BG /307 PESM80BG /311 PEMOTORS FOR CEA-CEA(N) SERIESMOTORS FOR CEA-CEA(N) SERIESMOTORS FOR CEA-CEA(N) SERIESMOTORS FOR CEA-CEA(N) SERIESMOTORS FOR CEA-CEA(N) SERIESSINGLE-PHASE MOTORS ASINGLE-PHASE MOTORS ASINGLE-PHASE MOTORS ASINGLE-PHASE MOTORS ASINGLE-PHASE MOTORS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLESMOTORI MONOFASE PER SERIE CEA 60 Hz, 2 poliINPUTCURRENTPN In (A) TnkW 220-230 V µF V min-1 ls / ln ? % cos? Nm Ts/Tn Tm/Tn0,55 SM71BG/1056 71 3,68-3,62 16 450 3400 4,28 70,2 0,97 1,54 0,66 2,110,75 SM71BG/1076 71 4,98-4,88 20 450 3380 3,90 69,8 0,98 2,12 0,64 1,910,9 SM71BG/1096 71 6,04-5,96 25 450 3370 3,80 72,9 0,98 2,69 0,58 1,861,1 SM80BG/1116 80 6,94-6,89 30 450 3435 4,54 74,2 0,97 3,06 0,62 2,031,5 SM80BG/1156 80 9,28-9,35 40 450 3455 4,91 76,3 0,96 4,14 0,49 2,191,85 PLM90BG/1226 90 12,3-11,7 60 450 3455 4,99 83,4 0,98 6,08 0,54 2,062,2 PLM90BG/1226 90 12,3-11,7 60 450 3455 4,99 83,4 0,98 6,08 0,54 2,06cea-motm-2p60-en_a_teMOTOR TYPESPECIALDATA FOR 220 V 50 Hz VOLTAGECAPACITORIEC SIZEConstruction DesignTHREE-PHASE MOTORS ATHREE-PHASE MOTORS ATHREE-PHASE MOTORS ATHREE-PHASE MOTORS ATHREE-PHASE MOTORS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLESStandard supplied IE2/IE3 three-phase surface motors Standard supplied IE2/IE3 three-phase surface motors Standard supplied IE2/IE3 three-phase surface motors Standard supplied IE2/IE3 three-phase surface motors Standard supplied IE2/IE3 three-phase surface motors = 0,75 kW are compliant with0,75 kW are compliant with0,75 kW are compliant with0,75 kW are compliant with0,75 kW are compliant withRegulation (EC) no. 640/2009 and IEC 60034-30.Regulation (EC) no. 640/2009 and IEC 60034-30.Regulation (EC) no. 640/2009 and IEC 60034-30.Regulation (EC) no. 640/2009 and IEC 60034-30.Regulation (EC) no. 640/2009 and IEC 60034-30.Electrical performances according to EN 60034-1.Insulation class 155 (F). IP55 protection. Condensate drain plugs on standard version.Cooling by fan according to EN 60034-6.Cable gland metric size according to EN 50262. Standard voltage:••••• Single-phaseSingle-phaseSingle-phaseSingle-phaseSingle-phase version: 220-230 V 60 Hz (incorporated automatic-reset overload protection).••••• Three-phaseThree-phaseThree-phaseThree-phaseThree-phase version : 220 V ?, 380 V ?, 60 Hz (overload protection to be provided by the user).11AAAAAVVVVVAILABLE VAILABLE VAILABLE VAILABLE VAILABLE VOLOLOLOLOLTTTTTAGESAGESAGESAGESAGESMOTORS FOR CEA-CEA(N) SERIESMOTORS FOR CEA-CEA(N) SERIESMOTORS FOR CEA-CEA(N) SERIESMOTORS FOR CEA-CEA(N) SERIESMOTORS FOR CEA-CEA(N) SERIESIEC SIZE1 x 220-240 1 x 100 1 x 110-120 1 x 220-230 1 x 1001x 110-115 1 x 120-127 1 x 200-210 3 x 220-230-240/380-400-415 3 x 380-400-415/660-690 3 x 200-208/346-360 3 x 255-265/440-460 3 x 290-300/500-525 3 x 440-460/- 3 x 500-525/- 3 x 220-230/380-400 3 x 255-265-277/440-460-480 3 x 380-400/660-690 3 x 440-460-480/- 3 x 110-115/190-200 3 x 200-208/346-360 3 x 330-346/575-600 3 x 575/- 3 x 230/400 50 Hz3 x 265/460 60 Hz3 x 400/690 50 Hz3 x 460/- 60 Hz0,4 63 s o o s - o - - 0,4 s o o o o o o s o o o o o o o o o0,55 71 s o o s o o o o 0,55 s o o o o o o s o o o o o o o o o0,75 71 s o o s o o o o 0,75 s o o o o o o s o o o o o o o o o0,95 71 s o o s o o o o 0,95 s o o o o o o s o o o o o o o o o1,1 80 s - o s - o - o 1,1 s o o o o o o s o o o o o o o o o1,5 80 s - - s - o - o 1,5 s o o o o o o s o o o o o o o o o2,2 90 s - - s - - - - 2,2 s o o o o o o s o o o o o o o o o3 s o o o o o o s o o o o o o o o os = Standard voltage o = Optional voltage - = Not available cea-volt-lowa-en_a_teTHREE-PHASE - 2 POLESPN kWSINGLE-PHASE50 Hz 60 HzPN kW50/60 Hz50 Hz 60 Hz12CEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESHYDRAHYDRAHYDRAHYDRAHYDRAULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES13These performances are valid for liquids with density ? = 1.0 Kg/dm3 and kinematic viscosity ? = 1 mm2/sec.CEA706 SERIESCEA706 SERIESCEA706 SERIESCEA706 SERIESCEA706 SERIESOPERAOPERAOPERAOPERAOPERATING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICS AS AS AS AS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES14These performances are valid for liquids with density ? = 1.0 Kg/dm3 and kinematic viscosity ? = 1 mm2/sec.CEA1206 SERIESCEA1206 SERIESCEA1206 SERIESCEA1206 SERIESCEA1206 SERIESOPERAOPERAOPERAOPERAOPERATING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICS AS AS AS AS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES15These performances are valid for liquids with density ? = 1.0 Kg/dm3 and kinematic viscosity ? = 1 mm2/sec.CEA2106 SERIESCEA2106 SERIESCEA2106 SERIESCEA2106 SERIESCEA2106 SERIESOPERAOPERAOPERAOPERAOPERATING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICS AS AS AS AS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES16These performances are valid for liquids with density ? = 1.0 Kg/dm3 and kinematic viscosity ? = 1 mm2/sec.CEA3706 SERIESCEA3706 SERIESCEA3706 SERIESCEA3706 SERIESCEA3706 SERIESOPERAOPERAOPERAOPERAOPERATING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICS AS AS AS AS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES17CEA SERIES DIMENSIONS AND WEIGHTS 60 HzPUMP TYPE DNA DNM WEIGHTA D H H1 H2 L L1 W kgCEAM 706/3/A 51 140 222 111 232 325 76 65 Rp 1¼ Rp 1 12,8CEAM 706/4/A 51 140 222 111 241 325 31 65 Rp 1¼ Rp 1 13CEAM 706/5/A 51 156 222 111 248 371 69 65 Rp 1¼ Rp 1 14,5CEAM 1206/1/A 51 140 222 111 232 325 76 65 Rp 1¼ Rp 1 11,7CEAM 1206/2/A 51 140 222 111 232 325 76 65 Rp 1¼ Rp 1 11,7CEAM 1206/3/A 51 140 222 111 241 325 31 65 Rp 1¼ Rp 1 11,7CEAM 1206/4/A 51 156 222 111 248 371 69 65 Rp 1¼ Rp 1 16,7CEAM 1206/5/P 51 174 222 111 262 416 84 65 Rp 1¼ Rp 1 24,4CEAM 2106/0/A 54 140 224 113 232 339 76 76 Rp 1½ Rp 1¼ 12,8CEAM 2106/1/A 54 156 224 113 248 385 69 76 Rp 1½ Rp 1¼ 16,8CEAM 2106/2/A 54 156 224 113 248 385 69 76 Rp 1½ Rp 1¼ 17CEAM 2106/3/P 54 174 224 113 262 429 84 76 Rp 1½ Rp 1¼ 24,6CEAM 2106/4/P 54 174 224 113 262 429 84 76 Rp 1½ Rp 1¼ 25CEAM 3706/0/A 54 156 224 113 248 385 69 76 Rp 2 Rp 1¼ 15CEAM 3706/0A/A 54 156 224 113 248 385 69 76 Rp 2 Rp 1¼ 21CEAM 3706/1/P 54 174 224 113 262 429 84 76 Rp 2 Rp 1¼ 26CEA 706/3/D 51 155 222 111 240 371 114 65 Rp 1¼ Rp 1 13CEA 706/4/D 51 155 222 111 240 371 114 65 Rp 1¼ Rp 1 14,6CEA 706/5/D 51 155 222 111 240 371 114 65 Rp 1¼ Rp 1 16,3CEA 1206/1/A 51 140 222 111 232 325 76 65 Rp 1¼ Rp 1 11,5CEA 1206/2/D 51 155 222 111 240 371 114 65 Rp 1¼ Rp 1 14,2CEA 1206/3/D 51 155 222 111 240 371 114 65 Rp 1¼ Rp 1 15CEA 1206/4/D 51 155 222 111 240 371 114 65 Rp 1¼ Rp 1 16,2CEA 1206/5/C 51 174 222 111 245 416 172 65 Rp 1¼ Rp 1 20,3CEA 2106/0/D 54 155 224 113 240 385 114 76 Rp 1½ Rp 1¼ 14CEA 2106/1/D 54 155 224 113 240 385 114 76 Rp 1½ Rp 1¼ 16CEA 2106/2/D 54 155 224 113 240 385 114 76 Rp 1½ Rp 1¼ 17,7CEA 2106/3/C 54 174 224 113 245 429 172 76 Rp 1½ Rp 1¼ 21,8CEA 2106/4/C 54 174 224 113 245 429 172 76 Rp 1½ Rp 1¼ 22,2CEA 3706/0/D 54 155 224 113 240 385 114 76 Rp 2 Rp 1¼ 16CEA 3706/0A/D 54 155 224 113 240 385 114 76 Rp 2 Rp 1¼ 17,7CEA 3706/1/C 54 174 224 113 245 429 172 76 Rp 2 Rp 1¼ 22,2CEA 3706/2/P 54 174 224 113 245 429 172 76 Rp 2 Rp 1¼ 23CEA 3706/3/P 54 174 224 113 245 429 172 76 Rp 2 Rp 1¼ 24cea-2p60-en_f_tdDIMENSIONS (mm)CEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESCEA-CEA(N) SERIESDIMENSIONS AND WEIGHTS ADIMENSIONS AND WEIGHTS ADIMENSIONS AND WEIGHTS ADIMENSIONS AND WEIGHTS ADIMENSIONS AND WEIGHTS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES1819Twin-Twin-Twin-Twin-Twin-ImpellerImpellerImpellerImpellerImpellerCentrifugalCentrifugalCentrifugalCentrifugalCentrifugalElectricElectricElectricElectricElectricPumpsPumpsPumpsPumpsPumpsMMMMMARKET SECTORSARKET SECTORSARKET SECTORSARKET SECTORSARKET SECTORSCIVIL, AGRICULTURAL, INDUSTRIAL.CA-CA(N)CA-CA(N)CA-CA(N)CA-CA(N)CA-CA(N)60 Hz Series60 Hz Series60 Hz Series60 Hz Series60 Hz SeriesAPPLICAAPPLICAAPPLICAAPPLICAAPPLICATIONSTIONSTIONSTIONSTIONS• Handling of chemically and mechanically non- aggressive water and liquids (*).• Water supply.• Irrigation.• Water circulation (cold, hot, refrigerated).* For moderately aggressive liquids, a version with FPM elastomers is available (CA../..V). For very aggressive liquids, please contact our sales network. On request “N” V On request “N” V On request “N” V On request “N” V On request “N” Version made of AISI 316ersion made of AISI 316ersion made of AISI 316ersion made of AISI 316ersion made of AISI 316 (for aggressive liquids) (for aggressive liquids) (for aggressive liquids) (for aggressive liquids) (for aggressive liquids)• Reverse osmosis (where demineralized water is used).• Industrial washing.• Thermal waters.• Chlorine dispensing in swimming pools.• Jewellary industry.• Wine production.SPECIFICASPECIFICASPECIFICASPECIFICASPECIFICATIONSTIONSTIONSTIONSTIONSPUMPPUMPPUMPPUMPPUMP• DeliveryDeliveryDeliveryDeliveryDelivery: up to 210 l/min (12,5 m3/h).• HeadHeadHeadHeadHead: up to 62 m.• TTTTTemperatureemperatureemperatureemperatureemperature of pumped liquid: -10°C to 85°C standard version. -10°C to +110°C (N and V versions).• MaximumMaximumMaximumMaximumMaximum operating pressure: 8 bar (PN 8).• Counterclockwise rotation facing the pump from the suction port.MOTORMOTORMOTORMOTORMOTOR• Asynchronous, squirrel cage rotor, closed construction, external ventilation.• Protection classProtection classProtection classProtection classProtection class: IP55.• InsulationInsulationInsulationInsulationInsulation: class 155 (F).• Performances to EN 60034-1 specification.• Standard voltageStandard voltageStandard voltageStandard voltageStandard voltage: Single-phase Single-phase Single-phase Single-phase Single-phase versions: 220-230 V, 60 Hz, 2 poles, with automatic reset overload protection? Standard suppliedStandard suppliedStandard suppliedStandard suppliedStandard supplied IE2/IE3 motors IE2/IE3 motors IE2/IE3 motors IE2/IE3 motors IE2/IE3 motors are compliant with are compliant with are compliant with are compliant with are compliant with Regulation (EC) Regulation (EC) Regulation (EC) Regulation (EC) Regulation (EC) no. 640/2009 no. 640/2009 no. 640/2009 no. 640/2009 no. 640/2009. up to 1,5 kW. For higher powers, the overload protection must be provided and installed by the user in the control panel. Three-phase Three-phase Three-phase Three-phase Three-phase version: 220-230/380-400 V, 60 Hz, 2 poles, the overload protection must be provided and installed by the user in the control panel.• Condensate drain plug in the standard version.CONTRUCTIONCONTRUCTIONCONTRUCTIONCONTRUCTIONCONTRUCTIONCHARACTERISTICCHARACTERISTICCHARACTERISTICCHARACTERISTICCHARACTERISTICSSSSS• Close-coupled, single-impeller centrifugal pump featuring axial suction and radial discharge.• Compact construction, with pump coupled directly to motor; special motor shaft extension supported by ball bearings.• Rotating assembly has back pull-out design, no need to disconnect the pump body from the pipe line.• Threaded suction and discharge ports (Rp ISO 7).• High performance closed impellerimpellerimpellerimpellerimpeller made of AISI 304 stainless steel.• Mechanical sealMechanical sealMechanical sealMechanical sealMechanical seal with ceramic/carbon rings, NBR elastomers, other parts are made of AISI 304 stainless steel. Mounting dimensions according to EN 12756 (ex DIN 24960) and ISO 3069.• NBR ONBR ONBR ONBR ONBR O-rings-rings-rings-rings-rings• Mounting pedestal.OPTIONALOPTIONALOPTIONALOPTIONALOPTIONALFEAFEAFEAFEAFEATURESTURESTURESTURESTURES• Different voltages and frequencies.• Different materials for the mechanical seal and O-rings.20CA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESIDENTIFICAIDENTIFICAIDENTIFICAIDENTIFICAIDENTIFICATION CODETION CODETION CODETION CODETION CODEEXAMPLE : CAM 1206/33-VCA series electric pump, single-phase, flow rate 120 l/min60 Hz, Impeller size 33, FPM version.RARARARARATING PLATING PLATING PLATING PLATING PLATETETETETE LEGENDLEGENDLEGENDLEGENDLEGENDSINGLE-PHASESINGLE-PHASESINGLE-PHASESINGLE-PHASESINGLE-PHASETHREE-PHASETHREE-PHASETHREE-PHASETHREE-PHASETHREE-PHASE 1 - Electric pump type 2 - Code 3 - Delivery range 4 - Head range 5 - Electrical data 6 - Serial number (date + sequential number) 8 - Minimum head11 - Rated power12 - Electric pump protection class13 - Maximum temperature of pumped liquidCA M 120 6 /IMPELLER SIZEFPM VERSION33 V6 = 60 HzNULL = 50 HzSERIES NAMEFLOW RATE IN l/minM = SINGLE-PHASENULL = THREE-PHASE-NVERSION MADE OF AISI 316/_NULL ORLETTER ASSIGNED BY THE MANUFACTURER21DENOMINAZIONE MODELSERIE CA VERSIONSCA706/33CA1206/33CA2006/33ca-caN-2p60-en_a_moMATERIALI CA70-CA120-CA200REF. PART MATERIALN. EUROPE USA1 Suction flange Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3042 Pump body Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3043 Impeller Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3044 Diffuser cover Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3045 Diffuser Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3048 Impeller spacer Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 3049 Elastomers11 Mechanical seal13 Fill/drain plugs Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 31624 Mounting pedestal Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) -33 Adapter Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) -34 Pump body fastening nuts and bolds35 Impeller shoulder washer Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 30436 Key Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 31637 Impeller lock nut and washer Stainless steel EN 10088-1-X5CrNi18-10 (1.4301) AISI 30438 Shaft extension Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 316ca-ca-en_b_tm Zinc-plated steelREFERENCE STANDARDS NBR (standard version) Ceramic / Carbon / NBR (standard version)MATERIALI CA70N-CA120N-CA200NREF. PART MATERIALN. EUROPE USA1 Suction flange Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L2 Pump body Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L3 Impeller Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L4 Diffuser cover Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L5 Diffuser Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L8 Impeller spacer Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 3169 Elastomers11 Mechanical seal13 Fill/drain plugs Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 31624 Mounting pedestal Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) -33 Adapter Aluminium EN 1706-AC-AlSi11Cu2 (Fe) (AC46100) -34 Pump body fastening nuts and bolds35 Impeller shoulder washer Stainless steel EN 10088-1-X2CrNiMo17-12-2 (1.4404) AISI 316L36 Key Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 31637 Impeller lock nut and washer Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 31638 Shaft extension Stainless steel EN 10088-1-X5CrNiMo17-12-2 (1.4401) AISI 316ca-caN-en_a_tm Zinc-plated steelREFERENCE STANDARDS EPDM (standard version) Ceramic / Carbon / EPDM (standard version)CA - CA(N) SERIESCA - CA(N) SERIESCA - CA(N) SERIESCA - CA(N) SERIESCA - CA(N) SERIESLIST OF MODELS AND TLIST OF MODELS AND TLIST OF MODELS AND TLIST OF MODELS AND TLIST OF MODELS AND TABLE OF MAABLE OF MAABLE OF MAABLE OF MAABLE OF MATERIALSTERIALSTERIALSTERIALSTERIALSCA SERIES TCA SERIES TCA SERIES TCA SERIES TCA SERIES TABLE OF MAABLE OF MAABLE OF MAABLE OF MAABLE OF MATERIALSTERIALSTERIALSTERIALSTERIALSCA(N) SERIES TCA(N) SERIES TCA(N) SERIES TCA(N) SERIES TCA(N) SERIES TABLE OF MAABLE OF MAABLE OF MAABLE OF MAABLE OF MATERIALS (ON REQUEST)TERIALS (ON REQUEST)TERIALS (ON REQUEST)TERIALS (ON REQUEST)TERIALS (ON REQUEST)22CA-CA(N) MECHANICAL SEAL, ACCORDING TO EN 12756CA-CA(N) MECHANICAL SEAL, ACCORDING TO EN 12756CA-CA(N) MECHANICAL SEAL, ACCORDING TO EN 12756CA-CA(N) MECHANICAL SEAL, ACCORDING TO EN 12756CA-CA(N) MECHANICAL SEAL, ACCORDING TO EN 12756Mechanical seal with mounting dimensions according to EN12756 (ex DIN 24960) and ISO 3069.CA-CA(N)CA-CA(N)CA-CA(N)CA-CA(N)CA-CA(N) TENUTA MECCANICA CA COMBINAZIONITEMPERATURE1 2 3 4 5ROTATING ASSEMBLYROTATING ASSEMBLY FIXED ASSEMBLYFIXED ASSEMBLY ELASTOMERSELASTOMERS SPRINGSSPRINGS OTHER COMPONENTSOTHER COMPONENTSV B P GFB P GF V B P G F -10 +85VBEGFVBEGF V B E G F -10 +110VCEGGVCEGG V C E G G -10 +110Q1Q1EGFEGF Q1 Q1 E GE G F -10 +110U3BEGFBEGF U3 B E G F -10 +110U3CEGFCEGF U3 C EC E G F -10 +110U3U3EGFEGF U3 U3 E GE G F -10 +110VBVGFVBVGF V B V G F -10 +110VCVGFVCVGF V C V G F -10 +110Q1Q1VGFVGF Q1 Q1 V G F -10 +110U3CVGFCVGF U3 C V G F -10 +110U3U3VGFVGF U3 U3 V G F -10 +110ca_tipi-ten-mec-en_b_tcTYPESTANDARD MECHANICAL SEALSTANDARD MECHANICAL SEALOTHER TYPES OF MECHANICAL SEALOTHER TYPES OF MECHANICAL SEALPOSITION( °C )CA CA CA CA CA MECHANICAL SEALSMECHANICAL SEALSMECHANICAL SEALSMECHANICAL SEALSMECHANICAL SEALSCA-CA(N) LIST OF MACA-CA(N) LIST OF MACA-CA(N) LIST OF MACA-CA(N) LIST OF MACA-CA(N) LIST OF MATERIALSTERIALSTERIALSTERIALSTERIALSCA(N) CA(N) CA(N) CA(N) CA(N) MECHANICAL SEALSMECHANICAL SEALSMECHANICAL SEALSMECHANICAL SEALSMECHANICAL SEALS TENUTA MECCANICA CEA (N)-CA (N) COMBINAZIONITEMPERATURE1 2 3 4 5ROTATING ASSEMBLYROTATING ASSEMBLY FIXED ASSEMBLYFIXED ASSEMBLY ELASTOMERSELASTOMERS SPRINGSSPRINGS OTHER COMPONENTSOTHER COMPONENTSV B E G GB E G G V B E G G G -10 +110V C E G GC E G G V C E G G G -10 +110Q1 Q1 E G G E G G Q1 Q1 E G G G -10 +110V C V G GC V G G V C V G G G -10 +110Q1 Q1 V G G V G G Q1 Q1 V G G G -10 +110cean-can_tipi-ten-mec-en_b_tcTYPESTANDARD MECHANICAL SEALSTANDARD MECHANICAL SEALOTHER TYPES OF MECHANICAL SEALOTHER TYPES OF MECHANICAL SEALPOSITION( °C ) TENUTA MECCANICA CEA-CA MATERIALI B : Resin impregnated carbon P P : NBR FF : AISI 304 C : Special resin impregnated carbon E E : EPDM G G : AISI 316 Q1 : Silicon carbide V : FPM U3 : Tungsten carbide V : Ceramic cea-ca_ten-mec-en_b_tmPOSITION 1 - 2 POSITION 3 POSITION 4 - 523DATI ELETTRICI SERIE CA 2 poli 60 HzMOTOR INPUT INPUT CAPACITOR MOTOR INPUT INPUT INPUTTYPE POWER* CURRENT* TYPE POWER* CURRENT* CURRENT*220-230 V 220-230 V 380-400 VkW A µF / 450 V kW A ACAM706/33 SM80CA/1156 2,01 9,32 40 CA706/33 SM80CA/315PE 1,81 5,73 3,31CAM1206/33 PLM90CA/1226 2,59 12,1 60 CA1206/33 PLM90CA/322 2,61 8,23 4,75CA2006/33 PLM90CA/330 3,35 10,5 6,07* Maximum value in specified range ca-2p60-en_f_tePUMP TYPESINGLE PHASEPUMP TYPETHREE PHASECA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESHYDRAHYDRAHYDRAHYDRAHYDRAULIC PERFORMANCE TULIC PERFORMANCE TULIC PERFORMANCE TULIC PERFORMANCE TULIC PERFORMANCE TABLE AABLE AABLE AABLE AABLE AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES PRESTAZIONI IDRAULICHE SERIE CA 2 poli 60 HzPUMP TYPEl/min 0l/min 0 30 40 50 60 70 80 90 120120 150150 180180 210210m3/h 0/h 0 1,81,8 2,42,4 3 3,63,6 4,24,2 4,84,8 5,45,4 7,27,2 9 10,810,8 12,612,6kW HPCA(M) 706/33 1,5 2 62,6 58,5 56,3 53,7 50,6 46,9 42,8 38,1CA(M) 1206/33 2,2 3 64,2 58,5 56,9 55,3 53,5 51,7 45,5 38,7CA 2006/33 3 4 62,4 59 58,2 55,2 51,7 47,6 43,2 ca-2p60-en_c_thRATEDPOWERQ = DELIVERYH = TOTAL HEAD METRES COLUMN OF WATERCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESELECTRICAL DAELECTRICAL DAELECTRICAL DAELECTRICAL DAELECTRICAL DATTTTTA AA AA AA AA AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES24MOTORI TRIFASE PER SERIE CA Ie2 60 Hz, 2 poli PNkW 4/4 3/4 2/4 4/4 3/4 2/4 4/4 3/4 2/4 4/4 3/4 2/41,5 87,2 87,0 84,6 87,2 87,0 84,6 87,2 87,0 84,6 87,2 87,0 84,6 32,2 85,5 85,5 84,5 85,5 85,5 84,5 85,5 85,5 84,5 85,5 85,5 84,53 87,8 88,0 86,0 87,8 88,0 86,0 87,8 88,0 86,0 87,8 88,0 86,0PN fN TNkW Hz cos? ls / lN Nm Ts/TN Tm/Tn1,5 80 0,82 9,79 4,10 4,36 4,372,2 90 0,83 9,59 6,00 3,80 4,023 90 0,84 9,12 8,22 3,52 3,65Altitudine T. amb ATEXPN 220 V 230 V 380 V 400 V 380 V 400 V 660 V 690 V s.l.m. min/maxkW m °C1,5 5,58 5,53 3,22 3,19 3,23 3,22 1,86 1,862,2 8,14 8,12 4,70 4,69 4,69 4,68 2,71 2,703 10,7 10,5 6,19 6,06 6,20 6,11 3,58 3,53Note: Observe the regulations and codes locally in force regarding sorted waste disposal. ca-ie2-mott-2p60-en_c_te** Operating conditions to be referred to motor only. About electric pump, refer to limits in user’s manual.IN (A)SPECIAL? YVoltage UNVSM80CA /315PEPLM90CA /322PLM90CA /330By June 2011Efficiency ?NY 690 V Year of construction%? 220 V ? 230 VIE2NoOperating conditions **? 1000-15 / 40?? 380 VY 380 V2 60Y 660 VY 400 VYManufacturerModelLowara srl Unipersonale Reg. No. 341820260 Montecchio Maggiore (Vicenza) Italia Data for 380 V / 60 HzConstruction DesignIEC SIZEN. of Poles3485 ÷ 35053495 ÷ 3505? 400 Vmin-1See note.nN3480 ÷ 3495MOTORS FOR CA-CA(N) SERIESMOTORS FOR CA-CA(N) SERIESMOTORS FOR CA-CA(N) SERIESMOTORS FOR CA-CA(N) SERIESMOTORS FOR CA-CA(N) SERIESSINGLE-PHASE MOTORS ASINGLE-PHASE MOTORS ASINGLE-PHASE MOTORS ASINGLE-PHASE MOTORS ASINGLE-PHASE MOTORS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLESMOTORI MONOFASE PER SERIE CA 60 Hz, 2 poliINPUTCURRENTPN In (A) TnkW 220-230 V µF V min-1 ls / ln ? % cos? Nm Ts/Tn Tm/Tn1,5 SM80CA/1156 80 9,28-9,35 40 450 3455 4,91 76,3 0,96 4,14 0,49 2,192,2 PLM90CA/1226 90 12,3-11,7 70 450 3455 4,99 83,4 0,98 6,08 0,54 2,06ca-motm-2p60-en_a_teMOTOR TYPESPECIALDATA FOR 220 V 50 Hz VOLTAGECAPACITORIEC SIZEConstruction DesignTHREE-PHASE MOTORS ATHREE-PHASE MOTORS ATHREE-PHASE MOTORS ATHREE-PHASE MOTORS ATHREE-PHASE MOTORS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLESStandard supplied IE2/IE3 three-phase surface motors Standard supplied IE2/IE3 three-phase surface motors Standard supplied IE2/IE3 three-phase surface motors Standard supplied IE2/IE3 three-phase surface motors Standard supplied IE2/IE3 three-phase surface motors = 0,75 kW are compliant with0,75 kW are compliant with0,75 kW are compliant with0,75 kW are compliant with0,75 kW are compliant withRegulation (EC) no. 640/2009 and IEC 60034-30.Regulation (EC) no. 640/2009 and IEC 60034-30.Regulation (EC) no. 640/2009 and IEC 60034-30.Regulation (EC) no. 640/2009 and IEC 60034-30.Regulation (EC) no. 640/2009 and IEC 60034-30.Electrical performances according to EN 60034-1.Insulation class 155 (F). IP55 protection. Condensate drain plugs on standard version.Cooling by fan according to EN 60034-6.Cable gland metric size according to EN 50262. Standard voltage:••••• Single-phaseSingle-phaseSingle-phaseSingle-phaseSingle-phase version: 220-230 V 60 Hz (incorporated automatic-reset overload protection).••••• Three-phaseThree-phaseThree-phaseThree-phaseThree-phase version : 220 V ?, 380 V ?, 60 Hz (overload protection to be provided by the user).25AAAAAVVVVVAILABLE VAILABLE VAILABLE VAILABLE VAILABLE VOLOLOLOLOLTTTTTAGESAGESAGESAGESAGESMOTORS FOR CA-CA(N) SERIESMOTORS FOR CA-CA(N) SERIESMOTORS FOR CA-CA(N) SERIESMOTORS FOR CA-CA(N) SERIESMOTORS FOR CA-CA(N) SERIESIEC SIZE1 x 220-240 1 x 100 1 x 110-120 1 x 220-230 1 x 1001x 110-115 1 x 120-127 1 x 200-210 3 x 220-230-240/380-400-415 3 x 380-400-415/660-690 3 x 200-208/346-360 3 x 255-265/440-460 3 x 290-300/500-525 3 x 440-460/- 3 x 500-525/- 3 x 220-230/380-400 3 x 255-265-277/440-460-480 3 x 380-400/660-690 3 x 440-460-480/- 3 x 110-115/190-200 3 x 200-208/346-360 3 x 330-346/575-600 3 x 575/- 3 x 230/400 50 Hz3 x 265/460 60 Hz3 x 400/690 50 Hz3 x 460/- 60 Hz0,75 71 s o o s o o o o 0,75 s o o o o o o s o o o o o o o o o0,95 71 s o o s o o o o 0,95 s o o o o o o s o o o o o o o o o1,1 80 s - o s - o - o 1,1 s o o o o o o s o o o o o o o o o1,5 80 s - - s - o - o 1,5 s o o o o o o s o o o o o o o o o2,2 90 s - - s - - - - 2,2 s o o o o o o s o o o o o o o o o3 s o o o o o o s o o o o o o o o os = Standard voltage o = Optional voltage - = Not available ca-volt-lowa-en_a_teTHREE-PHASE - 2 POLESPN kWSINGLE-PHASE50 Hz 60 HzPN kW50/60 Hz50 Hz 60 Hz26CA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESHYDRAHYDRAHYDRAHYDRAHYDRAULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AULIC PERFORMANCE RANGE AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES27These performances are valid for liquids with density ? = 1.0 Kg/dm3 and kinematic viscosity ? = 1 mm2/sec.CA706 SERIESCA706 SERIESCA706 SERIESCA706 SERIESCA706 SERIESOPERAOPERAOPERAOPERAOPERATING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICS AS AS AS AS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES28These performances are valid for liquids with density ? = 1.0 Kg/dm3 and kinematic viscosity ? = 1 mm2/sec.CA1206 SERIESCA1206 SERIESCA1206 SERIESCA1206 SERIESCA1206 SERIESOPERAOPERAOPERAOPERAOPERATING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICS AS AS AS AS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES29These performances are valid for liquids with density ? = 1.0 Kg/dm3 and kinematic viscosity ? = 1 mm2/sec.CA2006 SERIESCA2006 SERIESCA2006 SERIESCA2006 SERIESCA2006 SERIESOPERAOPERAOPERAOPERAOPERATING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICTING CHARACTERISTICS AS AS AS AS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLES30CA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESCA-CA(N) SERIESDIMENSIONS AND WEIGHTS ADIMENSIONS AND WEIGHTS ADIMENSIONS AND WEIGHTS ADIMENSIONS AND WEIGHTS ADIMENSIONS AND WEIGHTS AT 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLEST 60 Hz, 2 POLESCA SERIES DIMENSIONS AND WEIGHTS 60 HzPUMP TYPE DNA DNM WEIGHTD H L L1 M M1 N N1 S S1 W kgCAM 706/33/B 155 242 420 69 100 125 125 153 12 9 76 Rp 1¼ Rp 1 18,4CAM 1206/33/P 174 256 454 84 125 155 140 170 13 10 98 Rp 1¼ Rp 1 21,2CA 706/33/D 155 234 420 114 100 125 125 153 12 9 76 Rp 1¼ Rp 1 19,5CA 1206/33/P 174 239 454 172 125 155 140 170 13 10 98 Rp 1¼ Rp 1 22CA 2006/33/P 174 239 454 172 125 155 140 170 13 10 98 Rp 1½ Rp 1 27ca-2p60-en_f_tdDIMENSIONS (mm)31TECHNICALTECHNICALTECHNICALTECHNICALTECHNICALAPPENDIXAPPENDIXAPPENDIXAPPENDIXAPPENDIX32TYPICAL APPLICATYPICAL APPLICATYPICAL APPLICATYPICAL APPLICATYPICAL APPLICATIONS CEA AND CA SERIES ELECTRIC PUMPSTIONS CEA AND CA SERIES ELECTRIC PUMPSTIONS CEA AND CA SERIES ELECTRIC PUMPSTIONS CEA AND CA SERIES ELECTRIC PUMPSTIONS CEA AND CA SERIES ELECTRIC PUMPSWater Purification:FiltrationDe-ionized waterWater treatmentCommercial and residential poolsPlastic Industry:Temperature RegulatorsExtrusion machinesManufacture of polymersAgricultural Residential Applications:IrrigationGreenhousesHumidifiersWater supplyHeating, Ventilating & AirConditioning:Air scrubbersWater re-circulationCooling towersCooling systemsTemperature controlChillersInduction heatingHeat exchangersWater heatingBooster packagesGeneral Industry:Spray boothsLight chemical transferBooster systemsMedical:Laser coolingMassageMedical chillersSanitary equipmentWaste Management:Waste treatmentPollution controlMachine Tool:DegreasingParts washingChemical treatmentHeat treatmentGraphics:Film washingCooling processesMarine Sector:Water on board shipsComputers:Circuit board washingUnit coolingLaundry:Commercial washersFood and Drink:Food processingBottle washingCitrus processingDishwashingBrewingSanitary wareTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIX33 TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXCEA - CA SERIESstandard configuration:carbon\\\\ceramic mechanical seal, NBR O-ringsCompatibility chart for most commonly used liquids,for other compatible liquids refer to our web page www.lowara.commechanical seal materialsmechanical sealnumber Anumber Pnumber Ncarbon - ceramiccarbon - ceramicstandard productcarbon - ceramiccarbon - ceramicstandard productnot recommendedcarbon - ceramicstandard productcarbon - ceramicstandar productcarbon - ceramicstandard productconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration code34TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIX(X) - Richiesto battente positivo / Positive suction head required1 = COMPATIBILITA' BUONA(1)-Liquido pericoloso (tossico,velenoso,ustionabile ecc.)2 = COMPATIBILITA' MEDIOCRE 1 = GOOD COMPATIBILITY-Dangerous liquid (toxic,poisonous,attacks skin,irritant,etc.)3 = NON COMPATIBILE2 = POOR COMPATIBILITY(2)-Liquido infiammabile ed esplosivo3 = NO COMPATIBILITY-Flammable and explosive liquid(3)-Solo versioni a 4 poli. Fourpoles versions only.(4) La compatibilità dell'accaio inossidabile dipendedal contenuto di cloro in rapporto alla temperaturadel liquido, è necessaria un'analisi più dettaglataconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codeconfiguration codecarbon - ceramicstandard prodictcarbon - ceramicstandard productcarbon - ceramicstandard productcarbon - ceramicstandard productcarbon - ceramic35 TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXWATER REQUIREMENTS IN CIVIL USERSDetermination of the water requirement depends on the type of users and contemporaneity factor. The calculationmay be subject to regulations, standards or customs that may vary from country to country. The calculation methodshown below is an example based on practical experience, designed to provide a reference value and not a substi-tute for detailed analytical calculation.Water requirements in condominiumsThe consumption table shows the maximum values for each delivery point, depending on the plumbing amenities.MAXIMUM CONSUMPTION FOR EACH DELIVERY POINTTYPE CONSUMPTION (l/min)Sink 9Dishwasher 10Washing machine 12Shower 12Bathtub 15Washbasin 6Bidet 6Flush tank WC 6Controlled flushing system WC 90G-at-cm_a_thThe sum of the water consumption values of each delivery point determines the maximum theoretical re-quirement, which must be reduced according to the contemporaneity coefficient, because in actual fact thedelivery points are never used all together.The table of water requirements in civil users shows the maximum contemporaneity flow-rate valuesbased on the number of apartments and the type of WC for apartments with one bathroom and two bath-rooms. As regards apartments with one bathroom, 7 drawing points have been taken into consideration, while 11points have been considered for apartments with two bathrooms. If the number of drawing points or apartments isdifferent, use the formulas to calculate the requirement.( )NaNr857,01fxx=( )NaNr857,01fxx=( )NaNr545,003,1fxx=( )NaNr727,08,0fxx=Coefficient for apartments with one bathroom and flush tank WCCoefficient for apartments with one bathroom and controlled flushing system WCCoefficient for apartments with two bathrooms and flush tank WCCoefficient for apartments with two bathrooms and controlled flushing system WCf= coefficient; Nr= number of delivery points; Na= number of apartments36TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXNUMBER OFAPARTMENTS 1 2 1 21 32 40 60 792 45 56 85 1113 55 68 105 1364 63 79 121 1575 71 88 135 1766 78 97 148 1937 84 105 160 2088 90 112 171 2239 95 119 181 23610 100 125 191 24911 105 131 200 26112 110 137 209 27313 114 143 218 28414 119 148 226 29515 123 153 234 30516 127 158 242 31517 131 163 249 32518 134 168 256 33419 138 172 263 34320 142 177 270 35221 145 181 277 36122 149 185 283 36923 152 190 290 37824 155 194 296 38625 158 198 302 39426 162 202 308 40127 165 205 314 40928 168 209 320 41729 171 213 325 42430 174 217 331 43135 187 234 357 46640 200 250 382 49845 213 265 405 52850 224 280 427 55755 235 293 448 58460 245 306 468 61065 255 319 487 63570 265 331 506 65975 274 342 523 68280 283 354 540 70485 292 364 557 72690 301 375 573 74795 309 385 589 767100 317 395 604 787120 347 433 662 863140 375 468 715 932160 401 500 764 996180 425 530 811 1056200 448 559 854 1114For seaside resorts, a flow rate increased by at least 20% must be considered. G-at-fi_a_thFLOW RATE (l/min)WITH FLUSH TANK WC WITH CONTROLLED FLUSHING SYSTEM WCTABLE OF WATER REQUIREMENTS IN CIVIL USERS37 TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXWATER REQUIREMENTS FOR COMMUNITY BUILDINGSFor seaside resorts, the flow rate must be increased by at least 20%.1= Offices (N. of people)2= Department stores (N. of people)3= Nursing homes (N. of beds)4= Hotels, residences (N. of beds)The requirements of buildings intended for specific uses, such as offices, residential units, hotels, de-partment stores, nursing homes and so on, are different from those of condominiums, and both theirglobal daily water consumption and the maximum contemporaneity flow rate are usually greater. The diagramof water requirements for community buildings shows the maximum contemporaneity flow rate ofsome types of communities, for guidance.These requirements must be determined case by case with the utmost accuracy, using analytical calculation meth-ods, according to particular needs and local provisions.38The minimum operating values that can be reached at thepump suction end are limited by the onset of cavitation.Cavitation is the formation of vapour-filled cavities withinliquids where the pressure is locally reduced to a critical value,or where the local pressure is equal to, or just below thevapour pressure of the liquid.The vapour-filled cavities flow with the current andwhen they reach a higher pressure area the vapourcontained in the cavities condenses. The cavities collide,generating pressure waves that are transmitted to thewalls. These, being subjected to stress cycles, graduallybecome deformed and yield due to fatigue. Thisphenomenon, characterized by a metallic noiseproduced by the hammering on the pipe walls, is calledincipient cavitation.The damage caused by cavitation may be magnified byelectrochemical corrosion and a local rise intemperature due to the plastic deformation of thewalls. The materials that offer the highest resistance toheat and corrosion are alloy steels, especially austeniticsteel. The conditions that trigger cavitation may beassessed by calculating the total net suction head,referred to in technical literature with the acronymNPSH (Net Positive Suction Head).The NPSH represents the total energy (expressed in m.)of the liquid measured at suction under conditions ofincipient cavitation, excluding the vapour pressure(expressed in m.) that the liquid has at the pump inlet.To find the static height hz at which to install themachine under safe conditions, the following formulamust be verified:hp + hz = (NPSHr + 0.5) + hf + hpvwhere:hp is the absolute pressure applied to the free liquid surface in the suction tank, expressed in m. of liquid; hp is the quotient between the barometric pressure and the specific weight of the liquid.hz is the suction lift between the pump axis and the free liquid surface in the suction tank, expressed in m.; hz is negative when the liquid level is lower than the pump axis.hf is the flow resistance in the suction line and its accessories, such as: fittings, foot valve, gate valve, elbows, etc.hpv is the vapour pressure of the liquid at the operating temperature, expressed in m. of liquid. hpv is the quotient between the Pv vapour pressure and the liquid’s specific weight.0,5 is the safety factor.The maximum possible suction head for installationdepends on the value of the atmospheric pressure(i.e. the elevation above sea level at which the pumpis installed) and the temperature of the liquid.To help the user, with reference to water temperature(4° C) and to the elevation above sea level, thefollowing tables show the drop in hydraulic pressurehead in relation to the elevation above sea level, andthe suction loss in relation to temperature.Friction loss is shown in the tables at pages 40-41 ofthis catalogue. To reduce it to a minimum, especiallyin cases of high suction head (over 4-5 m.) or withinthe operating limits with high flow rates, werecommend using a suction line having a largerdiameter than that of the pump’s suction port.It is always a good idea to position the pump as closeas possible to the liquid to be pumped.Make the following calculation:Liquid: water at ~15°C ? = 1 kg/dm3Flow rate required: 30 m3/hHead for required delivery: 43 m.Suction lift: 3,5 m.The selection is an FHE 40-200/75 pump whose NPSHrequired value is, at 30 m3/h, di 2,5 m.For water at 15 °Chp = Pa / ? = 10,33m, hpv = Pv / ? = 0,174m (0,01701 bar)The Hf flow resistance in the suction line with footvalves is ~ 1,2 m.By substituting the parameters in formula with thenumeric values above, we have:10,33 + (-3,5) = (2,5 + 0,5) + 1,2 + 0,17from which we have: 6,8 > 4,4The relation is therefore verified. Water temperature (°C) 20 40 60 80 90 110 120 Suction loss (m) 0,2 0,7 2,0 5,0 7,4 15,4 21,5 Elevation above sea level (m) 500 1000 1500 2000 2500 3000 Suction loss (m) 0,55 1,1 1,65 2,2 2,75 3,3NPSHNPSHNPSHNPSHNPSH11TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIX39 TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXt T ps ? ? ?t T ps t T ps°C K bar kg/dm3 °C K bar kg/dm3 °C K bar kg/dm30 273,15 0,00611 0,9998 55 328,15 0,15741 0,9857 120 393,15 1,9854 0,94291 274,15 0,00657 0,9999 56 329,15 0,16511 0,9852 122 395,15 2,1145 0,94122 275,15 0,00706 0,9999 57 330,15 0,17313 0,9846 124 397,15 2,2504 0,93963 276,15 0,00758 0,9999 58 331,15 0,18147 0,9842 126 399,15 2,3933 0,93794 277,15 0,00813 1,0000 59 332,15 0,19016 0,9837 128 401,15 2,5435 0,93625 278,15 0,00872 1,0000 60 333,15 0,1992 0,9832 130 403,15 2,7013 0,93466 279,15 0,00935 1,0000 61 334,15 0,2086 0,9826 132 405,15 2,867 0,93287 280,15 0,01001 0,9999 62 335,15 0,2184 0,9821 134 407,15 3,041 0,93118 281,15 0,01072 0,9999 63 336,15 0,2286 0,9816 136 409,15 3,223 0,92949 282,15 0,01147 0,9998 64 337,15 0,2391 0,9811 138 411,15 3,414 0,927610 283,15 0,01227 0,9997 65 338,15 0,2501 0,9805 140 413,15 3,614 0,925811 284,15 0,01312 0,9997 66 339,15 0,2615 0,9799 145 418,15 4,155 0,921412 285,15 0,01401 0,9996 67 340,15 0,2733 0,9793 155 428,15 5,433 0,912113 286,15 0,01497 0,9994 68 341,15 0,2856 0,9788 160 433,15 6,181 0,907314 287,15 0,01597 0,9993 69 342,15 0,2984 0,9782 165 438,15 7,008 0,902415 288,15 0,01704 0,9992 70 343,15 0,3116 0,9777 170 433,15 7,920 0,897316 289,15 0,01817 0,9990 71 344,15 0,3253 0,9770 175 448,15 8,924 0,892117 290,15 0,01936 0,9988 72 345,15 0,3396 0,9765 180 453,15 10,027 0,886918 291,15 0,02062 0,9987 73 346,15 0,3543 0,9760 185 458,15 11,233 0,881519 292,15 0,02196 0,9985 74 347,15 0,3696 0,9753 190 463,15 12,551 0,876020 293,15 0,02337 0,9983 75 348,15 0,3855 0,9748 195 468,15 13,987 0,870421 294,15 0,24850 0,9981 76 349,15 0,4019 0,9741 200 473,15 15,550 0,864722 295,15 0,02642 0,9978 77 350,15 0,4189 0,9735 205 478,15 17,243 0,858823 296,15 0,02808 0,9976 78 351,15 0,4365 0,9729 210 483,15 19,077 0,852824 297,15 0,02982 0,9974 79 352,15 0,4547 0,9723 215 488,15 21,060 0,846725 298,15 0,03166 0,9971 80 353,15 0,4736 0,9716 220 493,15 23,198 0,840326 299,15 0,03360 0,9968 81 354,15 0,4931 0,9710 225 498,15 25,501 0,833927 300,15 0,03564 0,9966 82 355,15 0,5133 0,9704 230 503,15 27,976 0,827328 301,15 0,03778 0,9963 83 356,15 0,5342 0,9697 235 508,15 30,632 0,820529 302,15 0,04004 0,9960 84 357,15 0,5557 0,9691 240 513,15 33,478 0,813630 303,15 0,04241 0,9957 85 358,15 0,5780 0,9684 245 518,15 36,523 0,806531 304,15 0,04491 0,9954 86 359,15 0,6011 0,9678 250 523,15 39,776 0,799232 305,15 0,04753 0,9951 87 360,15 0,6249 0,9671 255 528,15 43,246 0,791633 306,15 0,05029 0,9947 88 361,15 0,6495 0,9665 260 533,15 46,943 0,783934 307,15 0,05318 0,9944 89 362,15 0,6749 0,9658 265 538,15 50,877 0,775935 308,15 0,05622 0,9940 90 363,15 0,7011 0,9652 270 543,15 55,058 0,767836 309,15 0,05940 0,9937 91 364,15 0,7281 0,9644 275 548,15 59,496 0,759337 310,15 0,06274 0,9933 92 365,15 0,7561 0,9638 280 553,15 64,202 0,750538 311,15 0,06624 0,9930 93 366,15 0,7849 0,9630 285 558,15 69,186 0,741539 312,15 0,06991 0,9927 94 367,15 0,8146 0,9624 290 563,15 74,461 0,732140 313,15 0,07375 0,9923 95 368,15 0,8453 0,9616 295 568,15 80,037 0,722341 314,15 0,07777 0,9919 96 369,15 0,8769 0,9610 300 573,15 85,927 0,712242 315,15 0,08198 0,9915 97 370,15 0,9094 0,9602 305 578,15 92,144 0,701743 316,15 0,09639 0,9911 98 371,15 0,9430 0,9596 310 583,15 98,70 0,690644 317,15 0,09100 0,9907 99 372,15 0,9776 0,9586 315 588,15 105,61 0,679145 318,15 0,09582 0,9902 100 373,15 1,0133 0,9581 320 593,15 112,89 0,666946 319,15 0,10086 0,9898 102 375,15 1,0878 0,9567 325 598,15 120,56 0,654147 320,15 0,10612 0,9894 104 377,15 1,1668 0,9552 330 603,15 128,63 0,640448 321,15 0,11162 0,9889 106 379,15 1,2504 0,9537 340 613,15 146,05 0,610249 322,15 0,11736 0,9884 108 381,15 1,3390 0,9522 350 623,15 165,35 0,574350 323,15 0,12335 0,9880 110 383,15 1,4327 0,9507 360 633,15 186,75 0,527551 324,15 0,12961 0,9876 112 385,15 1,5316 0,9491 370 643,15 210,54 0,451852 325,15 0,13613 0,9871 114 387,15 1,6362 0,9476 374,15 647,30 221,20 0,315453 326,15 0,14293 0,9862 116 389,15 1,7465 0,946054 327,15 0,15002 0,9862 118 391,15 1,8628 0,9445G-at_npsh_a_scTECHNICAL APPENDIX VAPOUR PRESSURE PS VAPOURPRESSURE AND ? DENSITY OF WATER TABLE40TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTABLE OF FLOW RESISTANCE IN 100 m OF STRAIGHT CASTIRON PIPELINE (HAZEN-WILLIAMS FORMULA C=100)m3/h l/min 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300 350 4001/2" 3/4" 1" 1 1/4" 1 1/2" 2 2 1/2" 3" 4" 5" 6" 7" 8" 10" 12" 14" 16"v 0,94 0,53 0,34 0,21 0,13 hr 16 3,94 1,33 0,40 0,13 The hr values must be multiplied by:v 1,42 0,80 0,51 0,31 0,20 0.71 for galvanized or painted steel pipeshr 33,9 8,35 2,82 0,85 0,29 0.54 for stainless steel or copper pipesv 1,89 1,06 0,68 0,41 0,27 0,17 0.47 for PVC or PE pipeshr 57,7 14,21 4,79 1,44 0,49 0,16 v 2,36 1,33 0,85 0,52 0,33 0,21hr 87,2 21,5 7,24 2,18 0,73 0,25v 2,83 1,59 1,02 0,62 0,40 0,25hr 122 30,1 10,1 3,05 1,03 0,35v 3,30 1,86 1,19 0,73 0,46 0,30hr 162 40,0 13,5 4,06 1,37 0,46v 2,12 1,36 0,83 0,53 0,34 0,20hr 51,2 17,3 5,19 1,75 0,59 0,16v 2,65 1,70 1,04 0,66 0,42 0,25hr 77,4 26,1 7,85 2,65 0,89 0,25v 3,18 2,04 1,24 0,80 0,51 0,30hr 108 36,6 11,0 3,71 1,25 0,35v 3,72 2,38 1,45 0,93 0,59 0,35hr 144 48,7 14,6 4,93 1,66 0,46v 4,25 2,72 1,66 1,06 0,68 0,40hr 185 62,3 18,7 6,32 2,13 0,59v 3,06 1,87 1,19 0,76 0,45 0,30hr 77,5 23,3 7,85 2,65 0,74 0,27v 3,40 2,07 1,33 0,85 0,50 0,33hr 94,1 28,3 9,54 3,22 0,90 0,33v 4,25 2,59 1,66 1,06 0,63 0,41hr 142 42,8 14,4 4,86 1,36 0,49v 3,11 1,99 1,27 0,75 0,50 0,32hr 59,9 20,2 6,82 1,90 0,69 0,23v 3,63 2,32 1,49 0,88 0,58 0,37hr 79,7 26,9 9,07 2,53 0,92 0,31v 4,15 2,65 1,70 1,01 0,66 0,42hr 102 34,4 11,6 3,23 1,18 0,40v 5,18 3,32 2,12 1,26 0,83 0,53 0,34hr 154 52,0 17,5 4,89 1,78 0,60 0,20v 3,98 2,55 1,51 1,00 0,64 0,41hr 72,8 24,6 6,85 2,49 0,84 0,28v 5,31 3,40 2,01 1,33 0,85 0,54 0,38hr 124 41,8 11,66 4,24 1,43 0,48 0,20v 6,63 4,25 2,51 1,66 1,06 0,68 0,47hr 187 63,2 17,6 6,41 2,16 0,73 0,30v 5,10 3,02 1,99 1,27 0,82 0,57 0,42hr 88,6 24,7 8,98 3,03 1,02 0,42 0,20v 5,94 3,52 2,32 1,49 0,95 0,66 0,49hr 118 32,8 11,9 4,03 1,36 0,56 0,26v 6,79 4,02 2,65 1,70 1,09 0,75 0,55hr 151 42,0 15,3 5,16 1,74 0,72 0,34v 7,64 4,52 2,99 1,91 1,22 0,85 0,62hr 188 52,3 19,0 6,41 2,16 0,89 0,42v 5,03 3,32 2,12 1,36 0,94 0,69 0,53hr 63,5 23,1 7,79 2,63 1,08 0,51 0,27v 6,28 4,15 2,65 1,70 1,18 0,87 0,66hr 96,0 34,9 11,8 3,97 1,63 0,77 0,40v 7,54 4,98 3,18 2,04 1,42 1,04 0,80hr 134 48,9 16,5 5,57 2,29 1,08 0,56v 8,79 5,81 3,72 2,38 1,65 1,21 0,93hr 179 65,1 21,9 7,40 3,05 1,44 0,75v 6,63 4,25 2,72 1,89 1,39 1,06 0,68hr 83,3 28,1 9,48 3,90 1,84 0,96 0,32v 8,29 5,31 3,40 2,36 1,73 1,33 0,85hr 126 42,5 14,3 5,89 2,78 1,45 0,49v 6,37 4,08 2,83 2,08 1,59 1,02 0,71hr 59,5 20,1 8,26 3,90 2,03 0,69 0,28v 7,43 4,76 3,30 2,43 1,86 1,19 0,83hr 79,1 26,7 11,0 5,18 2,71 0,91 0,38v 8,49 5,44 3,77 2,77 2,12 1,36 0,94hr 101 34,2 14,1 6,64 3,46 1,17 0,48v 6,79 4,72 3,47 2,65 1,70 1,18hr 51,6 21,2 10,0 5,23 1,77 0,73v 8,15 5,66 4,16 3,18 2,04 1,42hr 72,3 29,8 14,1 7,33 2,47 1,02v 6,61 4,85 3,72 2,38 1,65 1,21hr 39,6 18,7 9,75 3,29 1,35 0,64v 7,55 5,55 4,25 2,72 1,89 1,39hr 50,7 23,9 12,49 4,21 1,73 0,82v 8,49 6,24 4,78 3,06 2,12 1,56 1,19hr 63,0 29,8 15,5 5,24 2,16 1,02 0,53v 6,93 5,31 3,40 2,36 1,73 1,33hr 36,2 18,9 6,36 2,62 1,24 0,65G-at-pct_a_thhr = flow resistance for 100m of straight pipeline (m)V = water speed (m/s)420 7000600 100008000480540 9000210 3500360 6000240 4000300 5000180 30002000120150 250025015001000609075 1250500800600400901754836241510,518 300304,2 703 5015012 2004,8 800,9 150,6 105,41,2 201,8 302,1 351,5 252,4 403,6 606 1007,5 125FLOW RATE NOMINAL DIAMETER in mm and INCHES105 175042 70054 900941 TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXFLOW RESISTANCETABLE OF FLOW RESISTANCE IN BENDS, VALVES AND GATESThe flow resistance is calculated using the equivalent pipeline length method according to the table below:The table is valid for the Hazen Williams coefficient C = 100 (cast iron pipework). For steel pipework, multiply thevalues by 1.41. For stainless steel, copper and coated cast iron pipework, multiply the values by 1.85.When the equivalent pipeline length has been determined, the flow resistance is obtained from the table offlow resistance.The values given are guideline values which are bound to vary slightly according to the model, especially for gatevalves and non-return valves, for which it is a good idea to check the values supplied by the manufacturers.ACCESSORYTYPE 25 32 40 50 65 80 100 125 150 200 250 30045° bend 0,2 0,2 0,4 0,4 0,6 0,6 0,9 1,1 1,5 1,9 2,4 2,890° bend 0,4 0,6 0,9 1,1 1,3 1,5 2,1 2,6 3,0 3,9 4,7 5,890° smooth bend 0,4 0,4 0,4 0,6 0,9 1,1 1,3 1,7 1,9 2,8 3,4 3,9Union tee or cross 1,1 1,3 1,7 2,1 2,6 3,2 4,3 5,3 6,4 7,5 10,7 12,8Gate - - - 0,2 0,2 0,2 0,4 0,4 0,6 0,9 1,1 1,3Non return valve 1,1 1,5 1,9 2,4 3,0 3,4 4,7 5,9 7,4 9,6 11,8 13,9 G-a-pcv_a_thDNEquivalent pipeline length (m)42VOLUMETRIC CAPACITYLitres Cubic metres Cubic feet Cubic feet Imp. gal. US gal.per minute per hour per hour per minute per minute per minutel/min m3/h ft3/h ft3/min Imp. gal/min Us gal./min1,0000 0,0600 2,1189 0,0353 0,2200 0,264216,6667 1,0000 35,3147 0,5886 3,6662 4,40290,4719 0,0283 1,0000 0,0167 0,1038 0,124728,3168 1,6990 60,0000 1,0000 6,2288 7,48054,5461 0,2728 9,6326 0,1605 1,0000 1,20093,7854 0,2271 8,0208 0,1337 0,8327 1,0000PRESSURE AND HEADNewton per kilo Pascal bar Pound force per metre millimetre ofsquare metre square inch of water mercuryN/m2 kPa bar psi m H2O mm Hg1,0000 0,0010 1 x 10-5 1.45 x 10-4 1.02 x 10-4 0,00751000,0000 1,0000 0,0100 0,1450 0,1020 7,50061 x 105 100,0000 1,0000 14,5038 10,1972 750,06386894,7570 6,8948 0,0689 1,0000 0,7031 51,71519806,6500 9,8067 0,0981 1,4223 1,0000 73,5561133,3220 0,1333 0,0013 0,0193 0,0136 1,0000LENGTHmillimetre centimetre metre inch foot yardmm cm m in ft yd1,0000 0,1000 0,0010 0,0394 0,0033 0,001110,0000 1,0000 0,0100 0,3937 0,0328 0,01091000,0000 100,0000 1,0000 39,3701 3,2808 1,093625,4000 2,5400 0,0254 1,0000 0,0833 0,0278304,8000 30,4800 0,3048 12,0000 1,0000 0,3333914,4000 91,4400 0,9144 36,0000 3,0000 1,0000VOLUMEcubic metre litre millilitre imp. Gallon US gallon cubic footm3 litro ml imp. gal. US gal. ft31,0000 1000,0000 1 x 106 219,9694 264,1720 35,31470,0010 1,0000 1000,0000 0,2200 0,2642 0,03531 x 10-6 0,0010 1,0000 2.2 x 10-4 2.642 x 10-4 3.53 x 10-50,0045 4,5461 4546,0870 1,0000 1,2009 0,16050,0038 3,7854 3785,4120 0,8327 1,0000 0,13370,0283 28,3168 28316,8466 6,2288 7,4805 1,0000G-at_pp-en_a_scVVVVVOLOLOLOLOLUMETRIC CAPUMETRIC CAPUMETRIC CAPUMETRIC CAPUMETRIC CAPACITYACITYACITYACITYACITYPRESPRESPRESPRESPRESSURE AND HEADSURE AND HEADSURE AND HEADSURE AND HEADSURE AND HEADLENGLENGLENGLENGLENGTHTHTHTHTHVVVVVOLOLOLOLOLUMEUMEUMEUMEUMETECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIX43 TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXFURTHER PRODUCT SELECTION AND DOCUMENTFURTHER PRODUCT SELECTION AND DOCUMENTFURTHER PRODUCT SELECTION AND DOCUMENTFURTHER PRODUCT SELECTION AND DOCUMENTFURTHER PRODUCT SELECTION AND DOCUMENTAAAAATIONTIONTIONTIONTIONXylectXylectXylectXylectXylectXylect is pump solution selection software with an extensive online database of product information across the entireLowara, and Vogel range of pumps and related products, with multiple search options and helpful project managementfacilities. The system holds up-to-date product information on thousands of products and accessories.The possibility to search by applications and the detailed information output given makes it easy to make the optimalselection without having detailed knowledge about the Lowara and Vogel products.The search can be made by:• Application• Product type• Duty pointXylect gives a detailed output:• List with search results• Performance curves (flow, head, power,efficiency, NPSH)• Motor data• Dimensional drawings• Options• Data sheet printouts• Document downloads incl dxf filesThe search by application guides users not familiar withthe product range to the right choice.44TECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXTECHNICAL APPENDIXFURTHER PRODUCT SELECTION AND DOCUMENTFURTHER PRODUCT SELECTION AND DOCUMENTFURTHER PRODUCT SELECTION AND DOCUMENTFURTHER PRODUCT SELECTION AND DOCUMENTFURTHER PRODUCT SELECTION AND DOCUMENTAAAAATIONTIONTIONTIONTIONXylectXylectXylectXylectXylectThe detailed output makes it easy to select the optimal pump from the given alternatives.The best way to work with Xylect is to create apersonal account. This makes it possible to:• Set own standard units• Create and save projects• Share projects with other Xylect usersEvery user have a My Xylect space, where all projectsare saved.For more information about Xylect please contactour sales network or visit www.xylect.com.Dimensional drawings appear on the screen and can bedownloaded in dxf format.4546Xylem1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company.We’re 12,000 people uni? ed in a common purpose: creating innovative solutions to meet our world’s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water ef? ciently, in their homes, buildings, factories and farms. In more than 150 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise, backed by a legacy of innovation. For more information on how Xylem can help you, go to xyleminc.com.HeadquartersLOWARA S.r.l. UnipersonaleVia Vittorio Lombardi 1436075 Montecchio Maggiore - Vicenza - ItalyTel.(+39) 0444 707111 - Fax(+39) 0444 492166e-mail: lowara.mkt@xyleminc.comweb: www.lowara.com - www.completewatersystems.comLOWARA reserves the right to make modi? cation without prior notice.LOWARA is a trademark of Xylem Inc. or one of its subsidiaries.