Model EX-10 series - Miniature Photoelectric Sensors- Brochure

EX-10Ultra-slim Photoelectric SensorAmplifier built-inextraordinarily smalland slim size226SERIESSmallest body, just 3.5 mm 0.138 in thick High-speed response time: 0.5 ms Flexible mountingIt can be mounted in a very small spaceas its size is just W10?H14.5?D3.5 mmW0.394? H0.571? D0.138 in (thru-beam, front sensing type).The sensor is suitable for detectingsmall and high-speed traveling objects.The diffuse reflective type sensor isfront sensing and is so thin that it givesan impression of being just pasted onthe mounting base. The thru-beamtype is available as front sensing type,as well as, side sensing type, allowingflexible mounting.Diffuse reflective• Front sensing type Thru-beam• Front sensing type • Side sensing typeOperation mode switchThru-beam type sensor incorporatedwith an operation mode switch on thebifurcation is also available. It helpsyou to test the operability before start-up.Bright 2-color indicator WaterproofA convenient 2-color indicator hasbeen incorporated in the miniaturebody.Ten times durableFlexible cable on EX-10-R is 10 timesas durable as conventional model. It ismost suitable for moving parts, such asrobot arm, etc.The sensor can be hosed downbecause of its IP67 construction andthe non-corrosive stainless steelmounting bracket.Note: However, take care that if it is exposed towater splashes during operation, it maydetect a water drop itself.Red beam makes beam alignment easyThe red LED beam projected from theemitter helps you to align the sensorheads.2-color indicator Red: Operation indicator( Green: Stability indicator )SENS.SENS.EXEX-17-17SENS.SENS.EXEX-17-17Operation mode switchOperation indicator(Orange)Even for the thru-beam type sensor, only three wires have to be con-nected.Amplifier Built-inConforming to EMC Directive(Excluding EX-15?/17?)UL Recognition(Excluding 5 m cable length type)227EX-10APPLICATIONSVerifying position of PCBs Detecting ICs Detecting PCB rackEX-14?Transparent stickIC EX-15EX-19?Detecting wafer cassette Detecting thin ring Checking for absence of capacitorin trayEX-14? GuideEX-13E?EX-14?Mountable with M3 screws Minimum sensing object: "1 mm "0.039 in Long sensing range: 1 m 3.281 ft (EX-19?)Non-corrosive stainless steel typemounting bracket is also available.• MS-EX10-1 [Cold rolled carbon steel (SPCC)]and MS-EX10-11 [Stainless steel (SUS304)](mounting bracket for the front sensing type) • MS-EX10-2 [Cold rolled carbon steel (SPCC)]and MS-EX10-12 [Stainless steel (SUS304)](mounting bracket for the side sensing type)• MS-EX10-3 [Cold rolled carbon steel (SPCC)]and MS-EX10-13 [Stainless steel (SUS304)](L-shaped mounting bracket) EX-11?, EX-11E?, EX-15 and EX-15Eare incorporated with "1 mm "0.039 inslit masks so that "1 mm "0.039 in, ormore, object can be detected. Hence,they are suitable for precise positioning orsmall parts detection.A sensing range of 1 m 3.281 ft hasbeen realized with a slim size of just3.5 mm 0.138 in. It can be used todetect even wide IC trays.Background suppression (EX-14?)• Not affected by backgroundEven a specular background sepa-rated by 100 mm 3.937 in, or more,is not detected.However, the background should bedirectly opposite.• Black object reliably detectedIt can reliably detect dark color ob-jects since it is convergent reflectivetype.M3 screwsM3 screwsM3 screws1 m3.281 ft100 mm3.937 inBackgroundThe best distance isapprox. 10 mm 0.394 infrom the object.( )228EX-10Light-ONDark-ON Light-ONDark-ONLight-ONDark-ON Light-ONDark-ON Light-ONDark-ONLight-ONDark-ON ORDER GUIDE500 mm19.685 in150 mm 5.906 in500 mm19.685 in150 mm 5.906 in500 mm19.685 in150 mm 5.906 in500 mm19.685 in2 to 25 mm 0.079 to 0.984 in (Note)(Convergent point: 10 mm 0.394 in)150 mm 5.906 inType Appearance Sensing range Model No. Output operation OutputThru-beamNPN outputConvergentreflective(Diffused beam type)Front sensingFront se ns in gSide sensingWith op e ra tion mo d es witc h o n th e b ifu rca tionWith op e ra tion mo d es witc h o n th e b ifu rca tionEX-11AEX-11BEX-13AEX-13BEX-19AEX-19BEX-15 EX-17 EX-11EA EX-11EB EX-13EA EX-13EB EX-15EEX-17EEX-14AEX-14BEX-11A-PNEX-11B-PNEX-13A-PNEX-13B-PNEX-19A-PNEX-19B-PNEX-11EA-PNEX-11EB-PNEX-13EA-PNEX-13EB-PNEX-14A-PNEX-14B-PN500 mm19.685 in150 mm 5.906 in500 mm19.685 in2 to 25 mm 0.079 to 0.984 in (Note)(Convergent point: 10 mm 0.394 in)150 mm 5.906 inThru-beamPNP outputConvergentreflective(Diffused beam type)Front se ns in gFront se ns in gSid e se ns ingLight-ONDark-ON Light-ONDark-ONLight-ONDark-ON Light-ONDark-ON Light-ONDark-ONLight-ONDark-ON 1 m3.281 ft1m3.281 inNote: The sensor does not detect even a specular background if it is separated by 100 mm 3.937 in or more. (However, the background should bedirectly opposite.)Switchable either Light-ON or Dark-ONNPN open-collector transistorPNP open-collector transistorSwitchable either Light-ON or Dark-ONNOTE: Mounting bracket is not supplied with the sensor. Please select from the range of optional sensor mountingbrackets (six types).229EX-10ORDER GUIDEFlexible cable type and 5 m 16.404 ft cable length typeFlexible cable type and 5 m 16.404 ft cable length type (standard: 2 m 6.562 ft) are also available.• Table of model Nos.EX-11AEX-11BEX-13AEX-13BEX-19AEX-19BEX-15EX-17EX-11EAEX-11EBEX-13EAEX-13EBEX-15EEX-17EEX-14AEX-14BEX-11A-REX-11B-REX-13A-REX-13B-REX-19A-REX-19B-REX-11EA-REX-11EB-REX-13EA-REX-13EB-REX-14A-REX-14B-REX-11A-C5EX-11B-C5EX-13A-C5EX-13B-C5EX-19A-C5EX-19B-C5EX-15-C5EX-17-C5EX-11EA-C5EX-11EB-C5EX-13EA-C5EX-13EB-C5EX-15E-C5EX-17E-C5EX-14A-C5EX-14B-C5Thru-beamFront sensingWith operationmode switch onthe bifurcationWith operationmode switch onthe bifurcationSide sensingFront sensingConvergentreflective(Diffused beam type)Type Standard Flexible cable (2 m 6.562 ft) type 5 m 16.404 ft cable length type230EX-10Slit on both sides? Sensing range: 500 mm 19.685 in [EX-19?] 300 mm 11.811 in [EX-13?]? Min. sensing object: "1.5 mm "0.059 inDesignation Model No. DescriptionMounting bracket for the front sensing type sensor [Cold rolled carbon steel (SPCC)](The thru-beam type sensor needs two brackets.) Mounting bracket for the side sensing type sensor [Cold rolled carbon steel (SPCC)](The thru-beam type sensor needs two brackets.) L-shaped mounting bracket sensor [Cold rolled carbon steel (SPCC)](The thru-beam type sensor needs two brackets.) Mounting bracket for the front sensing type sensor [Stainless steel (SUS304)](The thru-beam type sensor needs two brackets.) Mounting bracket for the side sensing type sensor [Stainless steel (SUS304)](The thru-beam type sensor needs two brackets.) L-shaped mounting bracket [Stainless steel (SUS304)] (The thru-beam type sensor needs two brackets.)Slit on one side? Sensing range: 600 mm 23.622 in [EX-19?] 250 mm 9.843 in [EX-13?, EX-17]? Min. sensing object: "2 mm "0.079 inSlit on both sides? Sensing range: 400 mm 15.748 in [EX-19?] 200 mm 7.874 in [EX-13?, EX-17]? Min. sensing object: "1.2 mm "0.047 inSlit on one side? Sensing range: 800 mm 31.496 in [EX-19?] 350 mm 13.780 in [EX-13?]? Min. sensing object: "2 mm "0.079 inSlit on one side ? Sensing range: 250 mm 9.843 in [EX-13E?, EX-17E]? Min. sensing object: "2 mm "0.079 inSlit on both sides ? Sensing range: 200 mm 7.874 in [EX-13E?, EX-17E]? Min. sensing object: "1.2 mm "0.047 inMounting screws with washers (50 pcs. lot). It can mountsecurely as it is spring washer attached.SensormountingbracketSlit maskMounting screwMS-EX10-1MS-EX10-2 MS-EX10-3 MS-EX10-11MS-EX10-12MS-EX10-13OS-EX10-12(Slit size "1.2 mm "0.047 in)OS-EX10-15(Slit size "1.5 mm "0.059 in)OS-EX10E-12(Slit size "1.2 mm "0.047 in)CHX-SC2MS-M2Sensor checker(Note) It is useful for beam alignment of thru-beam type sensors.The optimum receiver position is given by indicators, aswell as an audio signal.OPTIONSSensor mounting bracket• MS-EX10-1 • MS-EX10-11• MS-EX10-2 • MS-EX10-12• MS-EX10-3 • MS-EX10-13Slit mask• OS-EX10-12 • OS-EX10E-12• OS-EX10-15Example of mounting(OS-EX10E-12)Tighten along with the sensormounting bracket.Sensor checker• CHX-SC2LEVELPOWER CHX-SC2Sensor checkerMaterial: Cold rolled carbon steel (SPCC) (Uni-chrome plated)Two M2 (length 4 mm 0.157 in)pan head screws are attached.Material: Stainless steel (SUS304)Two M2 (length 4 mm 0.157 in)pan head screws [stainless steel(SUS304)] are attached.Material: Cold rolled carbonsteel (SPCC) (Uni-chrome plated)Two M2 (length 8 mm 0.315 in)pan head screws are attached.Material: Stainless steel (SUS304)Two M2 (length 8 mm 0.315 in)pan head screws [stainless steel(SUS304)] are attached.Material: Cold rolled carbonsteel (SPCC)(Uni-chrome plated)Two M2 (length 4 mm 0.157 in)pan head screws, and twoM2 (length 8 mm 0.315 in)pan head screws are attached.Material: Stainless steel (SUS304)Two M2 (length 4 mm 0.157 in)pan head screws [stainless steel(SUS304)] and two M2 (length8 mm 0.315 in) pan head screws[stainless steel (SUS304)] areattached.231EX-1012 to 24 V DC?10 % Ripple P-P 10 % or lessNPN open-collector transistor • Maximum sink current: 50 mA• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 1 V or less (at 50 mA sink current) 0.4 V or less (at 16 mA sink current)PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (between output and?V)• Residual voltage: 1 V or less (at 50 mA source current) 0.4 V or less (at 16 mA source current)DC-12 or DC-13Incorporated0.5 ms or lessRed LED (lights up when the output is ON)Green LED (lights up under stable light received condition or stable dark condition)3 (Industrial environment)IP67 (IEC)?25 to?55 ?C ?13 to?131 ?F (No dew condensation or icing allowed), Storage:?30 to?70 ?C ?22 to?158 ?F35 to 85 % RH, Storage: 35 to 85 % RH Sunlight: 10,000 ?x at the light-receiving face, Incandescent light: 3,000 ?x at the light-receiving faceEN 50081-2, EN 50082-2, EN 60947-5-21,000 V AC for one min. between all supply terminals connected together and enclosure20 M?, or more, with 250 V DC megger between all supply terminals connected together and enclosure10 to 500 Hz frequency, 3 mm 0.118 in amplitude in X, Y and Z directions for two hours each500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times eachRed LED (modulated)Enclosure: Polyethylene terephthalate Lens: Polyalylate0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft longExtension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable(thru-beam type: emitter and receiver).Thru-beam Thru-beam • with operation mode switch on bifurcationFront sensing Side sensing Front sensing Side sensing Front sensing Front sensing Front sensing Side sensing Front sensing Side sensingEX-11A(-PN) EX-11EA(-PN) EX-13A(-PN) EX-13EA(-PN) EX-19A(-PN) EX-14A(-PN) EX-15 EX-15E EX-17 EX-17EEX-11B(-PN) EX-11EB(-PN) EX-13B(-PN) EX-13EB(-PN) EX-19B(-PN) EX-14B(-PN) (Note 2) (Note 2) (Note 2) (Note 2)NPN open-collector transistor• Maximum sink current: 100 mA• Applied voltage: 30 V DC or less (between output and 0 V)• Residual voltage: 1.5 V or less (at 100 mA sink current) • Residual voltage: 0.4 V or less (at 16 mA sink current)"0.1 mm "0.004 incopper wireSetting distance:10 mm 0.394 in"2 mm "0.079 inopaque objectSetting distance betweenemitter and receiver:1 m 3.281 ftTypeLight-ONItem Dark-ONSensing range Min. sensing objectHysteresisRepeatability (perpendicular to sensing axis) Supply voltageCurrent consumption OutputUtilization categoryShort-circuit protectionResponse time Operation indicator Incident beam indicator Stability indicatorPollution degreeProtectionAmbient temperature Ambient humidityAmbient illuminanceEMCVoltage withstandability Insulation resistanceVibration resistance Shock resistance Emitting elementMaterialCable (Note 4)Cable extensionWeightAccessoriesSPECIFICATIONSModelNo.(Note 1)150 mm 5.906 in"1 mm "0.039 in opaque objectSetting distance between emitter and receiver:150 mm 5.906 in500 mm 19.685 in 1 m 3.281 ft2 to 25 mm 0.079 to0.984 in (Note 3)(Conv. point: 10 mm 0.394 in)15 % or less ofoperation distance0.1 mm 0.004 inor lessConvergent reflective(Diffused beam type)0.05 mm 0.002 in or less0.05 mm 0.002 in or lessOrange LED (lights up when the output is ON),located on the bifurcationRed LED (lights up under light received condition),located on the receiverGreen LED (lights up under stable light received conditionor stable dark condition), located on the receiver20 mA or less 30 mA or lessEmitter: 10 mA or less, Receiver: 15 mA or less150 mm 5.906 in 500 mm 19.685 in( ) "2 mm "0.079 in opaque objectSetting distance betweenemitter and receiver:500 mm 19.685 in( ) "1 mm "0.039 in opaque objectSetting distance between emitter and receiver:150 mm 5.906 in( ) "2 mm "0.079 in opaque objectSetting distance between emitter and receiver:500 mm 19.685 in( )( )Mounting screws: 1 set Mounting screws:1 setEmitter: 20 g approx., Receiver: 20 g approx.Enclosure: Polyethylene terephthalate Lens: Polyalylate, Bifurcation: Polyalylate0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft long (beyond bifur-cation; from emitter / receiver to bifurcation: 0.5 m 1.640 ft long)Extension up to total 100 m 328.084 ft ispossible with 0.3 mm2, or more, cable.Mounting screws: 1 set, Adjusting screwdriver: 1 pc.55 g approx.20 g approx.Notes: 1) Model Nos. having the suffix ‘-PN’ are PNP output type.Notes: 2) Either Light-ON or Dark-ON can be selected by the operation mode switch (located on the bifurcation).Notes: 3) The sensing range of convergent reflective type sensor is specified for white non-glossy paper (50?50 mm 1.969?1.969 in) as the object.Notes: 4) The flexible cable type (model Nos. having suffix ‘-R’) has a 0.1 mm2 3-core (thru-beam type emitter : 2-core) flexible cabtyre cable, 2 m 6.562 ft long.Environmental resistance( )232EX-10I/O CIRCUIT AND WIRING DIAGRAMSEX-11? EX-13?EX-19? EX-14?I/O circuit diagramNPN output typePNP output typeNPN output typeWiring diagramUsers’ circuitInternal circuitColor code50 mA max.Sensor circuitTrDZDLoad(Brown)?V(Black)Output (Note)(Blue) 0 V??12 to 24 V DC?10 %Note: The emitter of the thru-beam type sensor does not incorporate the output.Note: The emitter of the thru-beam type sensor does not incorporate the black wire.Symbols … D : Reverse supply polarity protection diodeZD: Surge absorption zener diodeTr : NPN output transistor??BrownBlack (Note)BlueLoad12 to 24 V DC?10 %EX-11?-PN EX-13?-PNEX-19?-PN EX-14?-PNUsers’ circuitInternal circuitD50 mA max.ZDTrLoad(Black) Output (Note)(Blue) 0 V12 to 24 V DC?10 %??Sensor circuitColor code(Brown)?VSymbols … D : Reverse supply polarity protection diodeZD: Surge absorption zener diodeTr : PNP output transistorEX-15 EX-15EEX-17 EX-17EI/O circuit diagram Wiring diagramUsers’ circuitInternal circuitColor code100 mA max.Sensor circuitTrDZDLoad(Brown)?V(Black) Output(Blue) 0 V??12 to 24 V DC?10 %Symbols … D : Reverse supply polarity protection diodeZD: Surge absorption zener diodeTr : NPN output transistor?? 12 to 24 V DC?10 %LoadBrownBlackBlue??BrownBlack (Note)BlueLoad12 to 24 V DC?10 %Note: The emitter of the thru-beam type sensor does not incorporate the output.Note: The emitter of the thru-beam type sensor does not incorporate the black wire.I/O circuit diagram Wiring diagram233EX-10All modelsSENSING CHARACTERISTICS (TYPICAL)Correlation between setting distance and excess gain0 2007.87460023.62280031.4961,00039.370110510040015.748Excess gain50EX-13?EX-17?EX-11?EX-15?Setting distance L (mm in)0 13.28139.843413.123516.404110510026.562Excess gain50Setting distance L (m ft)EX-19?Thru-beam typeEX-19?Parallel deviation Angular deviation Parallel deviation with slit masks ("1.2 mm "0.047 in) Parallel deviation with slit masks ("1.5 mm "0.059 in)Thru-beam type2007.8741003.9370 1003.9372007.874050019.6851,00039.370ReceiverEmitterL#Set t ing distance L (mm in)Left RightCenterOperating point ?(mm in)40 20 0 20 40050019.6851,00039.370L$ReceiverEmitterSetting distance L (mm in)Left RightCenterOperating angle $( ? )EX-11? EX-11E?EX-15? EX-15E?Parallel deviation Angular deviationThru-beam typeReceiverEmitterReceiver1003.937501.9690 501.9691003.9370Left RightCenterOperating point ?(mm in)2007.8741003.9371505.906EX-11?EX-15?EX-11?EX-15?EX-11E?EX-15E?EX-11E?EX-15E?L# L#Set t ing distance L (mm in)Emitter501.969EmitterReceiverEmitterReceiver20 10 0 10 200501.9691003.9371505.9062007.874Left RightCenterOperating angle $( ° )EX-11?EX-15?EX-11?EX-15?EX-11E?EX-15E?L$L$Setting distance L (mm in)EX-11E?EX-15E?2007.8741003.9370 1003.9372007.87402007.87440015.74860023.62280031.496Slit on one sideSlit on both sidesReceiverEmitterL#Setting distance L (mm in)Left RightCenterOperating point ?(mm in)2007.8741003.9370 1003.9372007.874050019.6851,00039.370Slit on one sideSlit on both sidesReceiverEmitterL#Setting distance L (mm in)Left RightCenterOperating point ?(mm in)EX-13? EX-13E?EX-17? EX-17E?Parallel deviation Angular deviation Parallel deviation with slit masks ("1.2 mm "0.047 in) Parallel deviation with slit masks ("1.5 mm "0.059 in)Thru-beam type401.575200.7870 200.787401.5750EX-13?/17?Slit on one sideReceiverEmitterL#40015.74830011.8112007.8741003.937EX-13?/17?Slit on both sidesEX-13E?/17E?Slit on one sideEX-13E?/17E?Slit on both sidesSetting distance L (mm in)Left RightCenterOperating point ?(mm in)1003.937501.9690 501.9691003.9370Slit on one side or both sidesSlit on one side, sensing range: 350 mm 13.78 inSlit on both sides, sensing range: 300 mm 11.81 inReceiverEmitterL#40015.74830011.8112007.8741003.937Setting distance L (mm in)Left RightCenterOperating point ?(mm in)EmitterReceiverEmitterReceiver1003.937501.9690 501.9691003.9370Left RightCenterOperating point ?(mm in)2007.87440015.74860023.62280031.496EX-13?EX-17?EX-13?EX-17?EX-13E?EX-17E?EX-13E?EX-17E?L#L#Set t ing distance L (mm in)EmitterReceiver Receiver20 10 0 10 20Left RightCenterOperating angle $( ° )EX-13?EX-17?L$ L$EmitterEX-13?EX-17?02007.87440015.74860023.62280031.496EX-13E?EX-17E?EX-13E?EX-17E?Setting distance L (mm in)234EX-10Operation mode switchL : Light-OND: Dark-ONLights up when the output isON.Operation indicator (Orange)Switchposition Description• Vertical (up and down) directionSENSING CHARACTERISTICS (TYPICAL)Convergent reflective typeSensing fields• Horizontal (left and right) directionCorrelation between lightness and sensing range Correlation between material (50?50 mm 1.969?1.969 in) and sensing range 50.197100.3940 50.197100.3940100.394200.787301.181401.575WhiteN47 mm0.276 in#LSetting distance L (mm in)Left RightCenterOperating point ?(mm in)50?50 mm 1.969?1.969 inNon-glossy paper 0100.394200.787301.181401.575N2 N4 N6 N8Lightness LightDarkN2N1 N3 N4 N5 N6 N7 N8 N9Sensing range L (mm in)Sensing regionDistance to convergent point0200.787100.394401.575602.362803.150Sensing range L (mm in)Black circuit boardBlack rubber sheetIC tray (Black)Glass epoxy printed circuit board (Green masked surface)Ceramic circuit boardWhite non-glossy paperStainless steel plateAluminum plate(Hair line)Aluminum-evaporated mirrorDistance to convergent pointEX-14?The sensing region is represent-ed by oblique lines in the leftfigure. However, the sensitivityshould be set with enough mar-gin because of slight variation inproducts.Lightness shown on the leftmay differ slightly from theactual object condition.The bars in the graph indicate thesensing range for the respectivematerial. However, there is aslight variation in the sensingrange depending on the product.Further, if there is a reflectiveobject (conveyor, etc.) in thebackground of the sensing object,since it affects the sensing,separate it by more than twice thesensing range shown in the leftgraph.50.197100.3940 50.197100.3940100.394200.787301.181401.575WhiteN4#7.75mm0.305 inLSetting distance L (mm in)Down UpCenterOperating point ?(mm in)50?50 mm1.969?1.969 inNon-glossy paper( )The tightening torque should be 0.2 N?m or less.Dark-ON mode is set when the switch is turned fullycounterclockwise (D side).The tightening torque should be 0.2 N?m or less.• In case of using attached screws and nuts (Unit: mm in)PRECAUTIONS FOR PROPER USEThis product is not a safety sensor. Its use is not intended or designed to protect life and prevent bodyinjury or property damage from dangerous parts ofmachinery. It is a normal object detection sensor.Mounting• In case of mounting on tapped holes (Unit: mm in)Side sensing Front sensingSide sensing Front sensingM2?0.4 0.016 holetapped, 6 0.157 deepAttachedscrew[M2 (length 10 0.394)]110.433SensingdirectionSensingdirectionM2?0.4 0.016 holetapped, 7 0.276 deep[M2 (length 8 0.315)]Attachedscrew110.433Thickness of mounting plate: 2 0.079 or lessAttachedscrew[M2 (length 10 0.394)]Thickness of mounting plate: 2.5 0.098 or lessSpringwashersNutsFlat washers[M2 (length 8 0.315)]AttachedscrewSensingdirectionSensingdirection110.433110.433Operation mode switch (EX-15?, EX-15E?, EX-17? and EX-17E? only)Light-ON mode is set when the switch is turned fullyclockwise (L side).Others• Do not use during the initial transient time (50ms)(EX-15?, EX-15E?, EX-17?, EX-17E?: 100 ms) afterthe power supply is switched on.235EX-10EX-11A? EX-11B? EX-13A?EX-13B? EX-19A? EX-19B? SensorEmitter Receiver2-"2.2 "0.087 mounting holesBeam-emittingpart110.4331.75 0.0694.50.17714.50.5715.50.217100.3941.75 0.0692.10.0833.50.138"2.5 "0.098 cable, 2 m 6.562 ft long6.50.25640.1572.10.08340.1573.50.1385.50.217100.3946.450.254Beam-receivingpart2-"2.2 "0.087 mounting holes"2.5 "0.098 cable, 2 m 6.562 ft long110.4331.750.0694.50.17714.50.5711.50.0596.50.256Stabilityindicator(Green)Operationindicator(Red)1.750.069EX-11EA? EX-11EB?EX-13EA? EX-13EB? SensorEmitter Receiver2-"2.2 "0.087 mounting holes"2.5 "0.098 cable, 2 m 6.562 ft long110.4331.75 0.0694.50.17714.50.571100.3941.75 0.0696.50.25640.157Beam-emittingpart4.50.1772.250.0894.20.165Stabilityindicator (Green)Operationindicator (Red)Beam-receivingpart4.50.1772.250.0894.20.16540.157100.3946.450.2541.750.0692-"2.2 "0.087 mounting holes"2.5 "0.098 cable, 2 m 6.562 ft long110.4331.750.0694.50.17714.50.5711.50.0596.50.256EX-15 EX-17 SensorEX-15E EX-17E SensorEmitter EmitterReceiver Receiver50019.6852.10.0833.50.138381.49615.2 0.59880.31570.2761 0.0391.750.0695.50.2174 0.1574.5 0.1771.50.05919.20.756110.4331.750.0696.45 0.254Beam-receivingpartIncident beam indicator (Red)Stability indicator (Green)5.50.2171.750.069110.4334 0.157100.39410 0.3941.750.0692-"2.2 "0.087 mounting holes"2.5 "0.098 cables Operation mode switchOperation indicator(Orange)2-"2.2 "0.087 mounting holesBeam-emittingpart2.10.0833.50.138"3.8 "0.150 cable,2 m 6.562 ft long14.50.5714.50.17714.50.571Operation mode switch50019.685381.49615.2 0.59880.31570.2761 0.03919.20.756Beam-emittingpart40.157110.4331.750.0691.75 0.069100.394 6.45 0.2544.20.1651.750.0694.20.1652.250.0894.50.1774.50.17714.50.571110.4331.750.069 40.157100.3941.50.05914.50.5714.5 0.177Operation indicator(Orange)"2.5 "0.098 cables2-"2.2 "0.087 mounting holesBeam-receivingpartStability indicator (Green)Incident beam indicator (Red)2-"2.2 "0.087 mounting holes2.250.0894.50.177"3.8 "0.150 cable,2 m 6.562 ft longDIMENSIONS (Unit: mm in)236EX-10DIMENSIONS (Unit: mm in)EX-14A?EX-14B? SensorStability indicator(Green)Operationindicator (Red)1.750.0692.750.1086.450.254130.5122.10.0833.50.1384.50.177Beam-receivingpartBeam-emitting part2-"2.2 "0.087 mounting holes"2.5 "0.098 cable,2 m 6.562 ft long4.50.177 14.50.571110.4331.50.0591.750.06980.31550.197MS-EX10-1 Sensor mounting bracket (Optional)4-M2?0.4 0.016thru-hole threads 2-"3.4 "0.134 mounting holes6.50.256110.433150.59180.3157.60.2993.50.138200.78780.3153.70.146t 1.2t 0.047Beam-emittingpartBeam-receivingpart3 0.11850.19710.75 0.4234.25 0.1671.250.049t 1.2t 0.0473.70.1463.50.13820 0.787130.51222.75 0.8967.60.299(0.7)(0.028)(4.9)(0.193)3.50.13880.315 (8.8)(0.346)150.591110.43380.3152-"3.4 "0.134 mounting holesAssembly dimensionsMounting drawing with EX-14?MS-EX10-2 Sensor mounting bracket (Optional)2-M2?0.4 0.016 thru-hole threadst 1.2t 0.047150.591110.433200.7876.250.24680.3153.50.13880.3151.40.0553.20.1267.60.299100.3947.60.2993.20.1260.250.0104.250.1671.40.0551.250.0492.5 0.098t 1.2t 0.0476.250.2464.50.177(1.3)(0.051)110.433150.59180.31580.3153.50.138200.787Beam-receivingpart40.157(7.45)(0.293)(2.3)(0.091)Assembly dimensionsMounting drawing with EX-11E? and EX-13E?Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated)Two M2 (length 4 mm 0.157 in) pan head screws are attached.Material: Cold rolled carbon steel (SPCC)(Uni-chrome plated)Two M2 (length 8 mm 0.315 in) pan head screws are attached.237EX-10DIMENSIONS (Unit: mm in)MS-EX10-3 Sensor mounting bracket (Optional)4-M2?0.4 0.016thru-hole threads20.0796.50.2563.20.12680.31510.80.4257 0.276 10.50.4131.40.055110.433150.591t 1.2t 0.047 Beam-receiving partBeam-emitting part(2.75)(0.108)10.80.425t 1.2t 0.047(0.7)(0.028)130.51250.1971.75 0.0691.250.0493 0.118110.438150.5914.250.1673.50.13810.50.413 3.20.1261.40.05580.3156.250.24670.276Assembly dimensionsMounting drawing with EX-14?Material: Cold rolled carbon steel (SPCC) (Uni-chrome plated)Two M2 (length 4 mm 0.157 in) pan head screws, and two M2(length 8 mm 0.315 in) pan head screws are attached.Assembly dimensionsMounting drawing with EX-14?MS-EX10-11 Sensor mounting bracket (Optional)4-M2?0.4 0.016thru-hole threads110.4333.20.1261.40.0553.20.1261.40.055150.591200.7876.50.2563.50.13880.31580.3158.10.319t 1.2t 0.0473.70.146110.4333.20.1261.40.0553.20.1261.250.0494.250.1671.40.055150.59122.750.8963.50.13880.3153 0.1188.10.319200.787t 1.2t 0.0473.70.1463.50.138(4.9)(0.193)(0.7)(0.028)130.51250.197 10.75 0.423Beam-emitting partBeam-receiving part(9.3)(0.366)8 0.315Material: Stainless steel (SUS304)Two M2 (length 4 mm 0.157 in) pan head screws [stainless steel (SUS304)] areattached.MS-EX10-12 Sensor mounting bracket (Optional)2-M2?0.4 0.016thru-hole threads110.4333.20.1261.40.0553.20.1261.40.055150.5916.250.246200.78780.3158.10.319t 1.2t 0.04780.3153.50.138150.591110.43340.1573.50.1383.20.1262.5 0.0988.10.319200.787(7.45)(0.293)(2.3)(0.091)6.250.2464.50.177t 1.2t 0.047(1.3)(0.051)Beam- receivingpart80.315100.39480.3150.250.0101.40.055 1.250.049 3.20.1261.40.0554.250.167Assembly dimensionsMounting drawing with EX-11E? and EX-13E?Material: Stainless steel (SUS304)Two M2 (length 8 mm 0.315 in) pan head screws [stainless steel (SUS304)] areattached.238EX-10DIMENSIONS (Unit: mm in)MS-EX10-13 Sensor mounting bracket (Optional)4-M2?0.4 0.016thru-hole threadst 1.2t 0.04710.80.425110.43310.50.4136.5 0.2563.2 0.12620.079150.59170.2761.40.0551.4 0.05580.3153.2 0.126110.4333.20.1261.250.0494.250.167150.59180.3153 0.1183.20.1261.40.055130.51210.50.4133.50.1381.750.06910.80.42550.1971.40.055Beam-emittingpartBeam-receivingpartt 1.2t 0.047(2.75)(0.108)(0.7)(0.028)6.250.246 70.276Assembly dimensionsMounting drawing with EX-14?Material: Stainless steel (SUS304)Two M2 (length 4 mm 0.157 in) panhead screws [stainless steel (SUS304)]and two M2 (length 8 mm 0.315 in) panhead screws [stainless steel (SUS304)]are attached. date: 08/2005