Model EX-10S series - Miniature Photoelectric Sensors - Brochure

Conforming toEMC DirectiveRecognitionThru-beam · Narrow-beam type EX-10S?Ultra-slim Photoelectric SensorAmplifier built-in??????? ????Advantage 1Alleviates interference without slits, allowing close-spaced installationWith about half the light diffusion of previous models, narrow-beam models can be placed twice as closely together-without the added cost of purchasing and installing slits.Advantage 2Detects minute objects with a diameter of just 0.5 mm 0.020 in, without slitsWith about half the light diffusion of previous models, narrow-beam models can detect minute objects with a diameter of just 0.5 mm 0.020 in, without slits. These models provide a reasonably-priced solution for applications requiring detection of minute objects.High-speed response time: 0.5 msThe sensor is suitable for detecting small and high-speed traveling objects.Long-range sensing at 1 m 3.281 ft with a narrow-beamNarrow-beam models deliver long-range sensing at 1 m 3.281ft.Advantage 3Wide variationAvailable in a total of five types, including flat sensing and side sensing types. Choose the model that best suits the available installation space.EX-11S? / EX-11SE?• Sensing range : 150 mm 5.906 in• Min. sensing objectFront sensing : ø0.5 mm ø0.020 inSide sensing : ø1.0 mm ø0.039 inEX-13S? / EX-13SE?• Sensing range : 500 mm 19.685 in• Min. sensing objectFront sensing : ø1.0 mm ø0.039 inSide sensing : ø2.0 mm ø0.079 inEX-19S?• Sensing range : 1 m 3.281 ft• Min. sensing objectFront sensing : ø2.0 mm ø0.079 inEX-11S?Smallest body, just 3.5 mm 0.138 in thickIt can be mounted in a very small space as its size is just W10 × H14.5 × D3.5 mm W0.394 × H0.571 × D0.138 in (front sensing type).EX-19S?About half the light diffusion of previous modelsThree advantages of narrow-beam sensorsEX-11? / EX-11E?EX-11S? / EX-11SE?EX-19S?ø0.5 mmø0.020 inActual sizeSPECIFICATIONSEX-19S?EX-11S? / EX-11SE? EX-13S? / EX-13SE?EX-19E? (Additional standard-beam type model)Sensing range : 1 m 3.281 ftMin. sensing object : ø2.0 mm ø0.079 in opaque objectPARALLEL DEVIATIONS (TYPICAL)ItemTypeThru-beam · Narrow-beamFront sensing Side sensing Front sensing Side sensing Front sensingModel No.(Note 2)Light-ON EX-11SA(-PN) EX-11SEA(-PN) EX-13SA(-PN) EX-13SEA(-PN) EX-19SA(-PN)Dark-ON EX-11SB(-PN) EX-11SEB(-PN) EX-13SB(-PN) EX-13SEB(-PN) EX-19SB(-PN)Sensing range 150 mm 5.906 in 500 mm 19.685 in 1 m 3.281 ftMin. sensing object ø0.5 mm ø0.020 inopaque objectø1.0 mm ø0.039 inopaque objectø1.0 mm ø0.039 inopaque objectø2.0 mm ø0.079 inopaque objectø2.0 mm ø0.079 inopaque objectRepeatability (perpendicular to sensing axis) 0.05 mm 0.002 in or lessSupply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or lessCurrent consumption Emitter: 10 mA or less, Receiver: 10 mA or lessOutputNPN open-collector transistor• Maximum sink current: 50 mAPNP open-collector transistor• Maximum source current: 50 mAResponse time 0.5 ms or lessOperation indicator Orange LED (lights up when the output is ON)Stability indicator Green LED (lights up under stable light received condition or stable dark condition)Protection IP67 (IEC)Ambient temperature -25 to +55 °C -13 to +131 °F (No dew condensation or icing allowed), Storage: -30 to +70 °C -22 to +158 °FCable 0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft longWeight Net weight (each emitter and receiver): 20 g approx.,Gross weight: 50 g approx.Accessories Mounting screws: 1 setNOTE: Please note that MS-EX10-? sensor mounting brackets designed for standard-beam models cannot be used with narrow-beam models. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.2) Model Nos. having the suffix “-PN” are PNP output type.3) Standard-beam type EX-11(E)? / EX-13(E)? / EX-19(E)? are also available.1003.937501.9690 501.9691003.9370501.9691003.9371505.9062007.874LlReceiverEmitterReceiverEmitterL lSetting distance L (mm in)EX-11S?EX-11SE?EX-11S?EX-11SE?Left RightCenterOperating point l (mm in)1003.937501.9690 501.9691003.93702007.87440015.74860023.62280031.496L l ReceiverEmitterReceiverEmitterL l Setting distance L (mm in)Left RightCenterOperating point l (mm in)EX-13S?EX-13SE?EX-13S?EX-13SE?2007.8741003.9370 1003.9372007.874050019.6851,00039.370ReceiverEmitterLlSetting distance L (mm in)Left RightCenterOperating point l (mm in)2007.8741003.9370 1003.9372007.874050019.6851,00039.370LlReceiverEmitterLeft RightCenterOperating point l (mm in)Setting distance L (mm in)??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????¦????????????????????????????¦??????????????????????????????????????????????©???????????????????????????????????????????????????????????????????????????????????????????????????????????????EX-11S? / EX-13S? / EX-19S? SensorEX-11SE? / EX-13SE? / EX-19E? SensorReceiverEmitterReceiverEmitter2-ø2.2 ø0.087 mounting holesBeam-emittingpart110.4331.75 0.0694.50.17714.50.5715.50.217100.3941.75 0.0692.10.0833.50.138ø2.5 ø0.098 cable, 2 m 6.562 ft long6.50.25640.157 2.1 0.083 4 0.157 3.5 0.138 5.5 0.217 10 0.394 6.45 0.254 Beam- receiving part 2-ø2.2 ø0.087 mounting holes ø2.5 ø0.098 cable, 2 m 6.562 ft long 11 0.433 1.75 0.069 4.5 0.177 14.5 0.571 1.5 0.059 6.5 0.256 Stability indicator (Green) Operationindicator(Orange)1.75 0.069 2-ø2.2 ø0.087 mounting holesø2.5 ø0.098 cable, 2 m 6.562 ft long110.4331.75 0.0694.50.17714.50.571100.3941.75 0.0696.50.25640.157Beam-emittingpart4.50.1772.250.0894.20.165Stability indicator (Green) Operationindicator (Orange)Beam- receiving part 4.5 0.177 2.25 0.089 4.2 0.165 4 0.157 10 0.394 6.45 0.254 1.75 0.069 2-ø2.2 ø0.087 mounting holes ø2.5 ø0.098 cable, 2 m 6.562 ft long 11 0.433 1.75 0.069 4.5 0.177 14.5 0.571 1.5 0.059 6.5 0.256 NPN output type PNP output typeNote: The emitter does not incorporate the output.I/O CIRCUIT DIAGRAMSDIMENSIONS (Unit: mm in)Symbols … D1: Reverse supply polarity protection diodeD2: Reverse output polarity protection diodeZD: Surge absorption zener diodeTr : NPN output transistorSymbols … D1: Reverse supply polarity protection diodeD2: Reverse output polarity protection diodeZD: Surge absorption zener diodeTr : PNP output transistorNote: The emitter does not incorporate the output.Users’ circuit Internal circuit Color code 50 mA max. Sensor circuit Tr D1D2ZDLoad (Brown) +V (Black) Output (Note) (Blue) 0 V + - 12 to 24 V DC ±10 %Users’ circuit Internal circuit D1D250 mA max. ZDTr Load (Black) Output (Note) (Blue) 0 V 12 to 24 V DC±10 %Sensor circuit Color code (Brown) +V + - The CAD data in the dimensions can be downloaded from our website.