Model HF 130 - Hydraulic Milling Robot Brochure

HF 200HF 130Milling robots for 130-800 mmHächler AG UmwelttechnikTägerhardstrasse 118CH-5430 WettingenPhone +41 56 438 05 50Fax +41 56 438 05 51info@haechlerag.comwww.haechlerag.comThe Hächler AG Umwelttechnik provides all the solutions for sewer rehabilitationHydraulic milling robotsfor 130-800 mmPneumatic milling robotsfor 55-225 mmRehabilitating lateral connectionsfor 200-800 mmUV-curing systemsfor 150-1500 mmMilling toolsfor milling systems and pipe cleaningLayout: advertising21.deHydraulic milling robotsHF 200/HF 130Hydraulic milling robotsThe HF 130 and HF 200 hydraulic milling robots are particu-larly powerful.Torque is 4 times greater than that of other robotic systems The very high cutting performance guarantees a quick job and hence excellent economy This is particularly true for all operations in GRP liners.As is the case with all of our systems, the robots are sup-plied with dried air at a constant pressure. This means that ingress of water from outside is impossible.The complete system including all ancillary equipment is installed in small vehicles (5 tonnes total weight) or in a heavy goods vehicle at the client´srequest. Even where small vehicles are used, the trailer coupling device remains free for other purposes.This equipment can be extended into a multifunctional system by combining it with the EL 300/600 rehabilitation system and top hat profile systems.Milling tools CLICK-systemCamera with cleaning systemSmall vehicles LorriesHF 130Self assemblyPower LEDs Spatula unitCockpitFinderHF 200Milling robot for 200 to 800 mm Its 2-axis milling arm makes the HF 200 very flexible and hence ideal for use in egg-shaped sections. The robot can simultaneously perform milling procedures on pipe walls and remove material in its path. Penetration depth of up to 500 mm into the service connection makes it possible to carry out optimum preparation of service connection rehabi-litation, or to remove deposits in this area.HF 130Milling robot for 130 to 300 mmThe range is complemented by the HF 130, perfect for smaller nominal diameters. It offers exactly the same high milling performance as the HF 200.Expansion modulesSpatula unit for 200-800 mmThe spatula filler unit can be mounted on to the HF 200. It enables the spot renovation of individual damaged areas using epoxy resin or plasticized mortar.Finder for 200-800 mmThe innovative lateral sensor makes it possible to locate lateral pipes after the main pipe has been rehabilitated with an inliner.Technical Data:HF 200/HF 130 Features of the system: • cable length 75 to 100 m • hydraulic milling motor • constant pressure supply to the robot • simple control via touchscreenHF 200 milling robot: • for circular profiles ND 200-800 • for egg-shaped sections ND 250/375, 300/450, 400/600, 500/750, 600/900 • unbeatable depth of penetration into service con-nection (up to 500 mm)HF 130 milling robot: • for circular profiles ND 130 – 300Spatula unit: • for circular profiles ND 200-800 • use with epoxy resin or plasticized mortarFinder: • for circular profiles ND 200-800HF 200HF 130Milling robots for 130-800 mmHächler AG UmwelttechnikTägerhardstrasse 118CH-5430 WettingenPhone +41 56 438 05 50Fax +41 56 438 05 51info@haechlerag.comwww.haechlerag.comThe Hächler AG Umwelttechnik provides all the solutions for sewer rehabilitationHydraulic milling robotsfor 130-800 mmPneumatic milling robotsfor 55-225 mmRehabilitating lateral connectionsfor 200-800 mmUV-curing systemsfor 150-1500 mmMilling toolsfor milling systems and pipe cleaningLayout: advertising21.deHydraulic milling robots