Model ISF DWZ Series - Industrial Super Flow Duplex Water Softeners Datasheet

the water marqueWater Softeners ISF DWZ SeriesThe Industrial Super Flow Duplex water softeners are a proven range of quality engineered systems designed for higher flow situations and are readily configured for all process applications.Various control options are available and can be integrated with usual plant monitoring and status indication systems (BMS).These softeners are designed to operate automatically with no intervention and have very low maintenance needs.They are delivered with pre-manufactured manifolds for fast on-site installation and commissioning.Lubron UKLubron UK LimitedLubron House8 Challenge Way, Hythe HillColchester, Essex CO1 2LYTel: +44 (0)1206 866444 Fax: +44 (0)1206 866800 www.lubron.co.uk Lubron NederlandLubron Waterbehandeling B.V.Mechelaarstraat 384903 RE Oosterhout (NB)Postbus 540NederlandTel: +31 (0)162-426931Fax: +31 (0)162-459192www.lubron.euLubron BelgiëLubron Belgium B.V.B.A.Antwerpsesteenweg 124B-2630 AartselaarBelgiëTel: +32 (0)3877 1519Fax: +32 (0)3877 2884 Lubron DeutschlandLubron Wasseraufbereitung GmbHBahnhofstrasse 39D-71691 Freiberg am NeckarDeutschlandTel: +49 (0)7141 2986130Fax: +49 (0)7141 2986159www.lubron.deBrine TankHeightWidthOptions available:TECHNICAL INFORMATIONNormal configurationDuty standby or parallel operation of vesselsas required. Remote water meter regen-eration initiation with external contact, e.g.from hardness monitor alarm.ConnectionsPre-assembled manifold in PVC withflanged connections.Electrical requirementsNormally 230 V, 50 Hz. Transformed to24V AC for valve actuaction.Normal power consumption varies between10 and 340 Watts depending on status.Feed water pressureNormal range under operating conditions2 - 7 bar.Maximum acceptable water temperature40°C at inlet.ControlsMultiport brass valve (or Noryl,depending on requirements) with 24V ACactuators, operated by remote micropro-cessor controller mounted on backboardfor wall or pipework mounting providing:• Status indication• Water use and programme information• Alarm outputs• Programme over-ride capabilityResin vesselPolyethylene inner liner with GRP outershell, fitted with internal riser and distri-bution system and food grade high capacitysoftening resin. Typical test pressure 11 bar.PRODUCT RANGEType Maximum Nominal Typical Pressure Resin Salt Overallflow rate capacity• salt use•• loss volume storage dimensionsat per per200ppm generation tankCaCO3m3/h m3 kg bar litres kg cmH x W x DISF1600 DWZ 20 160 85 1.0 500 565 270 x 260 x 802400 DWZ 30 241 128 1.2 750 565 275 x 290 x 943200 DWZ 40 322 170 1.4 1000 860 280 x 320 x 1104000 DWZ 50 401 213 1.8 1250 860 285 x 350 x 125• Typical values •• Normal standard settingControllerSoftener Vessel Softener Vessel• Isolation valves• By-pass manifold• Hard water blending valves• Salt level monitor/alarm• Pressure gauges• Hardness monitor/alarm• Salt storage facilities• Brining systems• twin tank• bulk saturators• Simplex or multiplexconfiguration as required• Booster pumps• Skid mounting• Side mounted valves• Service flow/level controlsystem• Electronic meter/pulse relay• Noryl valves• 110 or 24 VDimensionsDimensions shown are for reference only. Contact Lubron for cerified drawings.LUBRON UK LIMITED reserve the right to change equipment specification without prior notice, as part of our continuous product development.