Model MR 40 RC - Vacuum Regulators System Brochure

Dosing devices for aggressive gases and fluids / Dosing devices for gasses / Systems of Vacuum regulators System of vacuum regulators series MR 40 RC General: The MR 40 RC System of Vacuum Regulators is designed for dosing larger amo-unts of gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle. The MR 40 RC System consists of an M 40 C vacuum regulator, an M 340 C ejector, and M 240 C rotameter. Dosing can be set manually by means of the dosing valve on the rota-meter. It starts or stops when the ejector pump switches on or off. The MR 40 RC System can be additionaly equipped with motor valve for automatic dosing of gas. It can easily be switched from automatic to manual opera-tion. M 340 C Ejector with non-return valve MR 40 RC Vacuum System additionaly equipped with motor valve 292929 BUL 02011 Dosing devices for aggressive gases and fluids / Dosing devices for gasses / Systems of Vacuum regulators Measure drawings : Technical data : Dosing ranges : (in kg/h) MR 40 RC: 20 - up to 20 kg/h 40 - up to 40 kg/h Dosing precision : ± 4% of the set value Gas Types : C=Cl2 S=SO2 N=NH3 Regulation Ratio : 1 : 20 Weight : 30 kg Connections: Vacuum: 20 (20 kg/h) – D20 – 3/4" 40 (40 kg/h) – D25 – 1" Pressure: Flange connection D3/4’’ NP16 DN20 (DIN2633) from 20 up to 40 kg Ejector connection : See product info for ejectors M 340. See product info for high capacity ejectors M 340. See product info for high capacity ejectors M 340. Data is subject to change without notice. 303030 Fajfarjeva 15, 1230 Domzale, Slovenija Tel. +386 1 72 13 552, Fax +386 1 72 19 360 www.controlmatik-abw.si Order codes : MR 40 R C/ X M U F T H Model Regulator Gas Type Dosing range Pressure Gauge(y/n) Vacuum Gauge(y/n) Filter(y/n) Chlorine trap Heater Options: -Alarm yes –“A”, without alarm the letter is not written in -Regulator “R”, means system with all general parts. -Gas type, “C” – Cl2, “S” – SO2, “N” – NH3 -Capacity is chosen from the technical data table and the suitable number is written into the ordering code -Pressure gauge yes – “M”, without it the letter is not written in -Vacuum gauge yes – “U”, without it the letter is not written in -Filter type M 3319 “F”, without it the letter is not written in; if filter is not selected then is present chlorine trap “T” “H” Heater : when the heather is necessary