Model MR 50 RC - Vacuum Regulators System Brochure

Dosing devices for aggressive gases and fluids / Dosing devices for gasses / Systems of Vacuum regulators System of vacuum regulators series MR 50 RC General: The MR 50 RC System of Vacuum Regula-tors is designed for dosing larger amounts of gas chlorine and with minor alterations also for other gases, working on the indirect vacuum principle. The MR 50 RC System consists of an M 50 C vacuum regulator, an M 350 C ejector, and M 250 C rotameter. M 350 C Ejector with non-return valve Dosing can be set manually by means of the dosing valve on the rota-meter. It starts or stops when the ejector pump switches on or off. The MR 50 RC System can be additionaly equipped with motor valve for automatic dosing of gas. It can easily be switched from automatic to manual opera-tion. MR 50 RC Vacuum System additionaly equipped with motor valve 313131 BUL 02012 Dosing devices for aggressive gases and fluids / Dosing devices for gasses / Systems of Vacuum regulators Measure drawings : Order codes : MR 50 R C/ X M U F T H Model Regulator Gas Type Dosing range Pressure Gauge(y/n) Vacuum Gauge(y/n) Filter(y/n) Chlorine trap(y/n) Heater(y/n) Options: -Regulator “R”, means system with all general parts -Gas type, “C” – Cl2, “S” – SO2, “N” – NH3 -Capacity is chosen from the technical data table and the suitable number is written into the ordering code -Pressure gauge yes – “M”, without it the letter is not written in -Vacuum gauge yes – “U”, without it the letter is not written in -Filter “F”, without it the letter is not written in; if filter is not selected then chlorine trap “T” is present. -“H” Heater : When the heater is necessary Technical data : Dosing ranges : (in kg/h) MR 50 RC: 60 upto………….60 80 up to.................80 120 up to...............120 Dosing precision : ± 4% of the set value Gas Types : C=Cl2 S=SO2 N=NH3 Regulation Ratio : 1 : 20 Weight : 54 kg Connections: Vacuum: 60 (60kg/h) – D32 – 5/4" 80 (80 kg/h) – D32 – 5/4" 120 (120 kg/h) – D32 – 5/4" Pressure: Flange connection D3/4’’ NP16 DN20 (DIN2633) from 60 up to 120 kg Other connections can be made by order. Ejector connection : See product info for ejectors M 350. See product info for high capacity ejectors M 350. See product info for high capacity ejectors M 350. Data is subject to change without notice. 323232 Fajfarjeva 15, 1230 Domzale, Slovenija Tel. +386 1 72 13 552, Fax +386 1 72 19 360 www.controlmatik-abw.si