Model PE-BG - Below Ground HDPE Water Storage Tanks Brochure

SerieS Pe-BGBelow Ground HdPe TankSHigh density polyethylene below ground tanks are an economical single piece water storage system with superior corrosion resistance. FeaTureS• Low profile design minimizes excavation depth• Integrated internal support columns molded into tank structure• Easily interconnect with equalization kit for larger storage capacities• No water required during installation• Tanks can be 100% emptied• Tanks are shipped from one of 5 manufacturing locations throughout the US reducing freight charges• Tanks can be shipped factory modified to customer specifications• HDPE material of construction provides long service life below groundES-BR-PE-BG BRAE product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact BRAE Technical Service. BRAE reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on BRAE products previously or subsequently sold.Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor –––––––––––––––––––––––––––––––––––––––––––––Job Location –––––––––––––––––––––––––––––––––––––––––– Approval ––––––––––––––––––––––––––––––––––––––––––––––Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––––Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative –––––––––––––––––––––––––––––––––––––––––Series PE-BGDescription and Capacity (Gallons)Length(in.) (mm)Width*(in.) (mm)Height** (in.) (mm)Manholes FOB325 Gallons – Sump 54 1372 54 1372 51 1295 1-20" (508mm) O500 Gallons – Sump 64 1626 64 1626 62 1575 1-20" (508mm) O1200 Gallons – Low Profile (LP) 126 3200 60 1524 51 1295 2-20" (508mm) A1700 Gallons – Low Profile (LP) 191 4851 60 1524 51 1295 2-20" (508mm) A2400 Gallons – Low Profile (LP) [2 x 1200] 126 3200 132 3353 51 1295 4-20" (508mm) A3400 Gallons – Low Profile (LP) [2 x 1700] 191 4851 132 3353 51 1295 4-20" (508mm) A5100 Gallons – Low Profile (LP) [3 x 1700] 191 4851 204 5182 51 1295 6-20" (508mm) A TeCHniCal daTa*Width includes the actual tank width plus 12" (300mm) for multi-tank capacities. **Height does not include manway riser sections. Tank aCCeSSorieSOrder ID Description130018 12" (300mm) Riser - 12" (300mm) H x 20" (500mm) Diameter120178 2" (50mm) Diameter Equalization Bulkhead Fitting120179 3" (80mm) Diameter Equalization Bulkhead Fitting120227 4" (100mm) Diameter Pipe Gasket100042 4" (100mm) Rubber Seal/Tank Gasket120229 6" (150mm) Diameter Pipe Gasket120256 4" (100mm) Diameter Screened Vent130033 6" (150mm) Diameter Vent w/Inspection Port130034 4" (100mm) Diameter Calming Inlet Assembly130035 6" (150mm) Diameter Calming Inlet Assembly120029 4" (100mm) Diameter Overflow Trap1. Filtration2. Below Ground PE Tank3. Rainset TYPiCal rain SYSTeM wiTH:OVERFLOW123To Irrigation System warninG Rainwater supplied by BRAE rainwater harvesting systems is not potable water and is not intended for potable water applica- tions. Do Not Drink Water supplied from BRAE rainwater systems and related equipment. Users shall determine the suitability of the product for the intended application before using.Plumbing Connection(s) (Riser Pos. A) (Inches) SELECT ONE_____ None (00) _____ Single 1" (25mm) NPT Connection (01) _____ Double 1" (25mm) NPT Connection - when direct makeup supply enters the tank (02) _____ Single 1-1/4" (32mm) NPT Connection (03) _____ Double 1-1/4" (32mm) NPT Connection - when direct makeup supply enters the tank (04) _____ Single 2" (50mm) NPT Connection (05) _____ Double 2" (50mm) NPT Connection - when direct makeup supply enters the tank (06) Conduit Connection(s) (Riser Pos. B) (Inches) SELECT ONE_____ None (00) _____ Single 1" (25mm) Electrical Conduit Connection (01) _____ Double 1" (25mm) Electrical and Controls Conduit Connections (02) riSer drawinG deTail How To orderSeries PE-BG Below Ground HDPE TanksCapacity (in gallons)• 325• 500• 1200• 1700• 2400• 3400• 5100Inlet Size (inches) Tank will be modified to include specified pipe stub for flexible connector (connector accessory not provided)• None (00)• 4" (100mm) Diameter (01)• 6" (150mm) Diameter (02)Overflow Size (inches) • None (00)• 4" (100mm) Diameter (01)• 6" (150mm) Diameter (02)Equalization Tank Port (2" (50mm) diameter bulkhead installed)• None (00)• 2" (50mm) (01)Tank Notes: 1. Cisterns should be vented per the installation instructions.2. Tanks are designed for buried applications only in non-traffic instal-lations.3. Each tank is supplied with a single 12” (300mm) high manway riser. Additional risers are available.4. F.O.B. points: A=Available all locations; C=Chowchilla, CA; L=Lincoln, NE; M=Marked Tree, AR; O=Oakboro, NC; P=Phillippi, WV 3. Modified tanks are shipped with calming inlet sized for the inlet pipe diameterPE - BG - - - - diMenSionS1,200 Gallons Low Profile HDPE Below Ground Tank Diagram1,700 Gallons Low Profile HDPE Below Ground Tank DiagramA InletB OverflowC VentD Conduit ConnectionE TIE PP CableF Rubber GasketG 2" (50mm) PP TxT W/EPDM GasketH ASM Packet (IOM) I LID UGWJ (4) SCREW SS 1/4X-14 x 2" (50mm) HH W/SealK LID UGWL (4) SCREW SS 1/4X-14 x 2" (50mm) HH W/SealA InletB OverflowC VentD Conduit ConnectionE TIE PP CableF Rubber GasketG 2" (50mm) PP TxT W/EPDM GasketH ASM Packet (IOM) I LID UGWJ (4) SCREW SS 1/4X-14 x 2" HH W/SealK LID UGWL (4) SCREW SS 1/4X-14 x 2" HH W/Seal3.25" (80mm)3.25" (80mm)5.00" (125mm) 5.00" (125mm)5.25" (133mm)5.25" (133mm)4.00" (100mm)60.00" (1600mm)126.00" (3000mm)51.00" (1295mm)191.00" (4851mm)5.00" (125mm)5.00" (125mm)3.25" (80mm)3.25" (80mm)51.00" (1295mm)60.00" (1600mm)5.25" (133mm)5.25" (133mm) laYouT drawinG deTail — SerieS inSTallaTion TANK #1TANK #2TANK #3AAABBBOUTLETEQUALIZATIONVENT INLET (by others)(by others)(by others)4” or 6”(100 or 150mm)4” or 6”(100 or 150mm)2” or 3”(50 or 80mm)4” or 6”(100 or 150mm)Modification Summary: TANK #1 INLET (Pos.A) = ________ OUTLET (Pos.B) = ________ EQUALIZATION = ________ VENT = ________ *RISER "A" (Qty) = ________ *RISER "B" (Qty) = ________ TANK #2 INLET (Pos.A) = ________ OUTLET (Pos.B) = ________ EQUALIZATION = ________ VENT = ________ *RISER "A" (Qty) = ________ *RISER "B" (Qty) = ________ TANK #3 INLET (Pos.A) = ________ OUTLET (Pos.B) = ________ EQUALIZATION = ________ VENT = ________ *RISER "A" (Qty) = ________ *RISER "B" (Qty) = ________ *Max Qty of 3 x 12" (300mm) Ht. Riser Sections per tank manway (max total of 6 riser sections per tank); Calming inlet is located at position A. laYouT drawinG deTail — Parallel inSTallaTion- TANK #1TANK #2TANK #3AAABBBOUTLETEQUALIZATIONVENT INLET (by others)(by others)(by others)4” or 6”(100 or 150mm)4” or 6”(100 or 150mm)2” or 3”(50 or 80mm)4” or 6”(100 or 150mm)Modification Summary: TANK #1 INLET (Pos.A) = ________ OUTLET (Pos.B) = ________ EQUALIZATION = ________ VENT = ________ *RISER "A" (Qty) = ________ *RISER "B" (Qty) = ________ TANK #2 INLET (Pos.A) = ________ OUTLET (Pos.B) = ________ EQUALIZATION = ________ VENT = ________ *RISER "A" (Qty) = ________ *RISER "B" (Qty) = ________ TANK #3 INLET (Pos.A) = ________ OUTLET (Pos.B) = ________ EQUALIZATION = ________ VENT = ________ *RISER "A" (Qty) = ________ *RISER "B" (Qty) = ________ *Max Qty of 3 x 12" (300mm) Ht. Riser Sections per tank manway (max total of 6 riser sections per tank); Calming inlet is located at position A.A Watts Water Technologies CompanyES-BR-PE-BG 1204 © 2012 BRAEUSA: Tel: (800) 772-1958 • Fax: (704) 485-8032 • www.braewater.comCanada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • www.braewater.ca Job Name field: Contractor field: Job Location field: Approval field 2: Engineer field: Contractor P: O: No: field: Approval field 1: Representative field: Text1: Text2: Text3: Text4: