Model SAK ISOLOK® Data Sheet 18.1.15

? Collects samples from slide or vertical drop chutes or direct from open processes? Single moving part collects 40 cc or 50 cc sample volume? Simple gravity-discharge design for powder, flakes or pellets up to 5/8" (16 mm) size? Heavy 316 stainless steel construction features chrome-hardened body bore? Field-replaceable, application-specific seals include EPDM, polyurethane elastomers and more? Extended-stroke plunger ideal for sample collection inside heavy-body/double-wall vessels? Choice of threaded instrument hub or 2.5" (6.4 cm) clamp ferrule for easy installation and maintenance? ATEX compliantISOLOK® Series SAH Extended-Stroke Samplers feature a three-inch plunger stroke to collect samples inside heavy-body or double-wall vessels such as mixers, dryers and reactors. The extended body can be utilized to capture free-falling material within chutes or slide aplications.An air cylinder extends a single plunger into the process material, then immediately withdraws, carrying a fixed amount of sample trapped in an annular ring between plunger seals. Process or flow ports are always closed, preventing leaks or product loss. There are no tubes or passages to become clogged. The gravity-discharged sample is transferred directly to a closed container. Sample integrity is maintained while contamination of personnel or facility is eliminated.ISOLOK® Series SAH Samplers can be used for composite, batch or analysis sampling techniques. Composite sampling is accomplished by obtaining a series of precisely measured material samples at set intervals or adjusted in response to product flow. Samples can be collected in common or individual containers. Batch or analysis sampling in response to immediate need or on-line process control interface is facilitated using single or rapid-cycling material withdrawal.A complete line of programmable automatic controls is available for use in general purpose as well as hazardous environments.www.sentry-equip.com 18.1.17 Rev. 6 02/14ISOLOK ® series sAH sAmplerBulk solids samplerExtended Stroke Sampler Collects Flowable MaterialsISOLOK® series sAHDescriptionFeaturesSPECIFICATIONSisolok® SAH TECHNICAL DATA1½"(OPG)ProductFlow1411/16" (37.3 cm)2½" TC21/32"Plunger ExtendsMomentarily toTake SampleSAmPLINg PrOCESSplunger extended;process isolatedplunger retracted;sample isolated and lockedSample Volume per Cycle 40 cc or 50 ccMaximum Particle Size 0.624" (16 mm)Operating Cycle Range maximum 15 samples/minuteBody Material 316 stainless steel; other alloys availablePlunger Material 316 stainless steel; other alloys availablePlunger Bore x Stroke 1.938" x 3" (39 mm x 76 mm)Plunger Seal Material. filled Teflon®, polyurethane, EPDM & others availableActuator Material 316 stainless steel; other alloys availableActuator Seal Material filled Teflon®; others availableStatic Seal Material fluoroelastomer; others availableSample Temperature Range -275° to 575°F (-170° to 302°C) depending on seal material & duty cycleAmbient Operating Temperature Range -5° to 131° F (-20° to 55° C) depending on seal materialLine Mount Adapter Type 3.75" (95 mm) instrument hub or 2.5" (63 mm) clamp ferruleCompressed Air Requirement 0.67 cfm @ 30 psi (19 l/min @ 2.07 bar) maximum cycle rangeOverall Dimensions, length x diameter, less accessories 14.7" x 6.25" (373 mm x 159 mm)Net Weight, not including controller or accessories 21 lbs. (9.5 kg)© Sentry Equipment Corp 2006 18.1.17 Rev. 6 02/14For further information, contact:It is solely the responsibility of the end-user, through its own analysis and testing, to select products and materials suitable for their specific application requirements, ensure they are properly installed, safely applied, properly maintained, and limit their use to their intended purpose. Improper selection, installation, or use may result in personal injury or property damage.SENTRY® EQUIPMENT CORP 966 Blue Ribbon Circle NorthOconomowoc, WI 53066 USATel: 262-567-7256 • Fax: 262-567-4523E-mail:sales@sentry-equip.comWebsite:www.sentry-equip.comEuropean Authorized Rep:OBELISBd. General Wahis 53-1030Brussels Belgium II 2GD TXTeflon is a registered trademark of E. I. Du Pont de Nemours and Company.