Model TL - Flow Meter Brochure

www . k y t o I a . c omISO 9001:2008 l ISO 14001:2004FLOW METER MODEL TLVariable area flow meter Model TL is a sturdy industrial flow meter. It comes with a stainless steel AISI 316 body and all parts are interchangeable. You can choose either a freeze resistant Grilamid (PA-12) or PES impact resistant flow tube. It is a reliable instrument for measuring and monitoring liquid and gas flows. For liquid, air or gas Flow rate water up to 105 USGPM (400 LPM) Flow rate air up to 450 SCFM (12 NLPM) Maximum pressure 290 psi (20 bar) Maximum temperature 175°F (80°C) Minimum temperature seals -22°F (-30°C) Nitrile -4°F (20°C) Viton® Connections 2” NPT (2” BSP), ANSI 2” (DN50) FlangedFEATURESStainless steel AISI 316 bodyChoice of flow tubeAluminum or 316 stainless steel connectionsThreaded or flanged connectionsTYPICAL APPLICATIONSWater treatmentOil or compressed air measurementsSealing water measurements of vacuum pumpsKEY OPTIONSInductive low/high flow alarmViton® or EPDM sealsCustom calibration/special construction availableUSA +1 678-701-3569 • CANADA +1 514-630-7887FAX +1 514-448-5151 • E-mail: flow@kytoIa.comwww.kytoIa.comDealer Name AddressMODEL TLA TECHNICAL DATA2” BSP2” NPTø 90 (3.54)373 (14.69)2” BSP( 2” NPT )317 (12.48)DN502” ANSI 150 RF mm (inches)TL - - Flow meter Body MaterialA NPT 2” (BSP 2”) aluminumH NPT 2” (BSP 2”) AISI 316FH ANSI 2” (DN50) flanges AISI 316 H20 Flow Range Air Flow RangeUSGPM LPM SCFM NM3/MIN4E 2.0 - 15.0 7.5 - 55 15 - 70 0.3 - 2.04A 2.5 - 27.5 10 - 105 20 - 120 0.4 - 3.04F 2.5 - 40.0 10 - 150 20 - 160 0.5 - 4.254B 5.0 - 52.5 20 - 200 20 - 220 0.5 - 6.54C 10 - 85.0 40 - 320 40 - 380 1 - 104D 10 - 105.0 50 - 400 50 - 450 1 - 12Scale A H20 scale LPM (20°C)D Relative scale 1-10G H20 scale USGPH (70°F)S Air scale NM3/MIN (20°C, 101.3 kPa)T Air scale SCFM (70°F, 14.7 psia)Special OptionD Alarm readiness (holder required)N NPT 2” or 2” ANSI 150# RF connectionsV PES (polysulphone) flow tubeW PES (polysulphone) flow tube and Viton® sealsX Viton® sealsY EPDM sealsModel TLA TLH TLFHBody AISI 316 AISI 316 AISI 316Flow tube Grilamid (*PES) Grilamid (*PES) Grilamid (*PES)Float AISI 329** AISI 329** AISI 329**Connectors Aluminum AISI 316 AISI 316Seals Nitrile (*Viton®, EPDM) Nitrile (*Viton®, EPDM) Nitrile (*Viton®, EPDM)Connections NPT 2” (*BSP 2”) NPT 2” (*BSP 2”) ANSI 2” (*DN50) FlangedMaximum pressure290 psi (20 bar) up to maximum temp.290 psi (20 bar) up to maximum temp.232 psi (16 bar) up to maximum temp.Maximum temperature175oF (80oC) ((248oF (120oC))175oF (80oC) ((248oF (120oC))175oF (80oC) ((248oF (120oC))Weight 7 lbs 4 oz (3.3 kg) 9 lbs 15 oz (4.5 kg) 14 lbs 9 oz (6.6 kg)* Special construction upon request. **PTFE float for flow range 4E