MONO - Model CML 243 110V - Progressive Cavity Pump Brochure

Features and Benefits Compact design A single rotor, universal drive coupling enables this pump range to be small in size, whilst the robust construction ensures reliable service. Pumping principleThe key to this pumping principle is the moving part, known as the rotor and the fixed part, the stator, inside which the rotor rotates. A progressive cavity is formed which progresses pumped liquid towards the discharge end of the pump as the rotor rotates.Reliable performanceThe Mono M range can satisfy a range of demanding duties, including viscous liquids and random solids. It features an abrasion and chemical resistant stator, a precision-engineered stainless steel rotor, a mechanically sealed drive shaft and a close-grained cast iron pump housing.Smooth, silent runningThe pump’s smooth action and resilient rubber stator ensure quiet running - a very desirable feature for domestic installations.Positive pumping actionThe progressing cavity principle, as explained above, ensures steady output pressure and non pulsing flow. This is vital in some applications such as pumping heating oil to burner nozzles.Self-primingThe M Range pumps are fully self priming and can achieve suction lifts up to 26ft (8m). This allows for accessible mounting, well clear of liquid levels.STATORAuthorised DistributorM RangeMini PumpsPublished information other than that marked CERTIFIED does not extend any warranty or representation, expressed or implied, regarding these products. Any such warranties or other terms and conditions of sales and products shall be in accordance with Mono Pumps Limited standard terms and conditions of sale, available on request.© Mono Pumps Limited April 2013 Literature reference: MPSB/018/01/R1Mono® is a registered trademark of Mono Pumps Ltd. Registered in England No 300721ContactMono Pumps Ltd, Martin Street, Audenshaw Manchester, M34 5JA, England T. +44 (0)161 339 9000 E. info-mono@nov.com W. www.mono-pumps.comROTORFor light industrial applicationsPerformance DataDrive Motor DetailsPump r.p.m.0 bar 1.4 bar 2.4 bar 2.75 bar 3.45 barWeightkg0lb/in2 20lb/in2 35lb/in2 40lb/in2 50lb/in2l/h gal/h l/h gal/h l/h gal/h l/h gal/h l/h gal/hMS 1450 750 165 500 110 409 90 386 85 318 68 15MM 1450 1590 350 1250 275 1050 231 1000 220 900 198 17ML 2850 3130 690 2470 543 2040 450 1890 416 1590 350 18MS 0.18kW Single/Three Phase 110/230/380/415V 50 HzMM 0.37kW Single/Three Phase 110/230/415V 50 HzML 0.55kW Three Phase 415V 50 HzML 0.75kW Single Phase 230V 50 Hz*All motors supplied with IP55 enclosure as standard, with others availableSuction LiftsPump m ftMS 8 26MM 7.5 25ML 5.5 17.5Capacity up to 3,130 l/h Pressure up to 3.45 barTemperature up to 70°CTypical Applications• Cellar drainage • Septic tank/cess pit emptying • Water supply/sampling from wells, streams and rivers • Garden sprinkler systems/irrigation • Diesel • Water based inks • Vegetable oils • Non-aggressive chemicals • Oil/Water pressure sets MANUFACTURED BY MONOCMM MODELCMS MODELCML MODEL