Morse - Double Drum Rollers - Specifications Sheet

The Specialist In Drum Handling EquipmentDouble Stationary Drum Rollers2-5154 SeriesMORSE Mfg. Co., Inc. • 727 West Manlius St. • P.O. Box 518 • East Syracuse, NY 13057-0518Phone: (315) 437-8475 • Fax: (315) 437-1029 • Email: info@morsedrum.com • Website: morsedrum.comCopyright 2014 - Morse Mfg. Co., Inc. Spec Sheet F2-5154 (Updated January 27, 2014 1:19 PM)MADEINUSAFixed Speed Drum RollersDesigned to rotate one or two drums at a time at factory fixed drum speed of 10, 20, or 30 RPM, based on 22.5” (57 cm) diameter drum.Variable Speed Drum RollersRotate one or two drums at a time at any speed from 1 to 38 RPM. Find the best speed for each material. Some use high speed for initial mixing and low speed for prolonged agitation. Variable speed drum rollers are ideal for experimental use or where there is a variety of materials to be handled.ROTATE VARIOUS DRUM SIZES: A simple three-bolt attachment feature enables the user to relocate the idler wheel shaft assembly to adjust for various drum diameters. Set screws at each wheel permit easy repositioning to support various length drums.GROUNDING STRAP: Spring steel grounding straps are standard at every drum position to help drain possible static charge from drums.Double Stationary Drum Rollers Click Here to Watch the VideoSave time, labor and money• Blend ingredients right inside • your sealed drum Eliminate transfer, clean-up, • special vessels and apparatusEnsure Homogeneity• Capacity per drum: • Liquid load: 1,000 Lb. (455 kg) Dry load varies: 400 Lb. (182 kg) at 10 RPM 300 Lb. (136 kg) at 20 RPM 250 Lb. (114 kg) at 30 RPMWith twice the capacity of Double drum rollers, the heavy duty 1 HP motor drives an efficient gear reducer connected to a 1”(2.54 cm) diameter shaft operating eight 6” (15.2 cm) diameter neoprene drive wheels. There are four roller bearing idler wheels for each drum position. Handle: One or two steel drums 6” to 28” (15 to 71 cm) diameter and up to 40” (102 cm) long. Motor: 1 HPBase Dimensions: 24” x 94” (61 x 234 cm)Domestic Ship dimensions: L 102” W 31” H 17” (259 x 79 x 43 cm)Export ship dimensions: L 107” W 29” H 24” (271 x 74 x 61 cm) Recommended Loading MethodEfficiently load drum rollers with overhead lifting equipment and Morse model 41 Drum Lifting Hook (shown right), or model 42 Drum Lifter. MOTOR SELECTION: The basic motor is a three phase, 230/460V, 60Hz, TEFC motor. Other motor voltages, phases, enclosure types, etc. (for example: Explosion-Proof ***) or air motors are available. Motor controls are not included with the basic machines. Standard Stationary Drum Rotators are shipped without control, cord and plug and must be installed by an electrician according to local codes and customer’s preference.Explosion-Proof *** motors are rated for Class I Group D, and Class II Groups F and G.Air motors are vane-type and require correctly sized filter, regulator, lubricator, valve (FRL) and piping supplied by customer. Air Motor Technical InformationFilter, regulator and lubricator (FRL) may be ordered from Morse.Part # 90020-P Description: KIT, 3/8” FRL & VALVE• Install Morse Rotators in accordance with OSHA requirements for enclosure and interlock, etc. For OSHA compliance, see OSHA subpart O.1910.212 “General Requirements for all Machines.” Power connections and motor controls must comply with applicable codes.Roll 1 or 2 drums a a time(Model 2-5154/20-3 shownrolls drums at 20 RPM)OptionsROLL PLASTIC DRUMS: Roll 55-gallon (208 liter) plastic drums on a stationary drum roller with option POLY-2-5154. It provides extra wheels to support the flexible soft sides of your 55-gallon plastic drum, and an end stop to prevent it from traveling lengthways while being rolled, because plastic drums lack rigid ribs or roll rings.ROLL A 5-GALLON PAIL: Optional Idler Attachment part # 1-5-1 facilitates rolling 1 to 5 gallon size (3.8 to 18.9 liters) cylindrical cans / pails. Install one idler attachment for each drum position where you want to roll a pail. It is easily removed to return to rolling drums.The Specialist In Drum Handling EquipmentDouble Stationary Drum Rollers2-5154 SeriesCopyright 2014 - Morse Mfg. Co., Inc. Spec Sheet F2-5154 (Updated January 27, 2014 1:19 PM) 2MADEINUSAEnclosures with Safety InterlockComply with OSHA Requirements (Enclosure Kits Sold Separately)Enclosures for Morse Double Stationary Drum Rollers have a safety interlock to automatically shut off the drum roller when the gate is opened. Open the enclosure gate, place your drum onto the drum roller, then close the gate to allow operation. Connections are included for air powered models only. Customer to provide controls and connections for 1-phase and 3-phase AC models.Install all Morse Drum Rotators in accordance with OSHA requirements for enclosure and safety interlock, etc. Drum roller automatically turns off when enclosure door is opened. For OSHA compliance, see OSHA subpart O.1910.212(a)(4) “Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place.” Power connections and motor controls must comply with applicable codes.Guard Enclosure KitDescription (drum roller sold separately)Gate Switch Ship Weight Ship DimensionsGEK-2-5154-1 Fits Double Stationary Drum Roller with 1-phase electric motor AC 418 Lb. (190 kg) L101” W31” H66” (257 x 79 x 168 cm)GEK-2-5154-3 Fits Double Stationary Drum Roller with 3-phase electric motor AC 418 Lb. (190 kg) L101” W31” H66” (257 x 79 x 168 cm)GEK-2-5154-E1 Fits Double Stationary Drum Roller with Explosion-proof 1-phase electric motor AC 418 Lb. (190 kg) L101” W31” H66” (257 x 79 x 168 cm)GEK-2-5154-E3 Fits Double Stationary Drum Roller with Explosion-proof 3-phase electric motor AC 418 Lb. (190 kg) L101” W31” H66” (257 x 79 x 168 cm)GEK-2-5154-A Fits Double Stationary Drum Roller with Air motor Air 418 Lb. (190 kg) L101” W31” H66” (257 x 79 x 168 cm)* Explosion Proof rated for Class I Group D, and Class II Groups F and GOutside Post-To-Post DimensionsL100” x W52” x H65.25” (254 x 132 x 166 cm)The Specialist In Drum Handling EquipmentDouble Stationary Drum Rollers2-5154 SeriesCopyright 2014 - Morse Mfg. Co., Inc. Spec Sheet F2-5154 (Updated January 27, 2014 1:19 PM) 3MADEINUSAContinued on page 3* RPM is based on standard 22.5” (57.15 cm) diameter 55-gallon (208 liter) drum.** A shifting dry load exerts greater stress on the drum roller than the fluid motion of a liquid load.*** Explosion proof models are rated for Class I Group D, and Class II Groups F and G. Variable speed models are NOT available for hazardous areas.† Domestic Ship dimensions: L 102” W 31” H 17” (259 x 79 x 43 cm). Export ship dimensions: L 107” W 29” H 24” (271 x 74 x 61 cm) Install Morse Rotators in accordance with OSHA requirements for enclosure and interlock, etc. For OSHA compliance, see OSHA subpart O.1910.212(a)(4) “Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place.”Power connections and motor controls must comply with applicable codes.Drum Roller Model # Roll Motor Style Phase Volts HzFull Load Amp Draw RPM *Capacity Per Drum Drum DiameterMax. Drum LengthShip Weight †Liquid Dry **Variable Speed Drum Rollers2-5154VS-1-115 1 or 2 Drums Inverter Duty 1 HP 1 115 50 / 60 16.6 Variable 1 to 381000 Lb. (455 kg)400 Lb. (182 kg) at 10 RPM, 200 Lb. (91 kg) at 40 RPM6” to 28” (15 to 71 cm) 40” (102 cm)495 Lb. (225 kg)2-5154VS-1-230 1 or 2 Drums Inverter Duty 1 HP 1 230 50 / 60 8.3 Variable 1 to 381000 Lb. (455 kg)400 Lb. (182 kg) at 10 RPM, 200 Lb. (91 kg) at 40 RPM6” to 28” (15 to 71 cm) 40” (102 cm)495 Lb. (225 kg)2-5154VS-3-230 1 or 2 Drums Inverter Duty 1 HP 3 230 50 / 60 5.0 Variable 1 to 381000 Lb. (455 kg)400 Lb. (182 kg) at 10 RPM, 200 Lb. (91 kg) at 40 RPM6” to 28” (15 to 71 cm) 40” (102 cm)495 Lb. (225 kg)2-5154VS-3-460 1 or 2 Drums Inverter Duty 1 HP 3 460 50 / 60 2.5 Variable 1 to 381000 Lb. (455 kg)400 Lb. (182 kg) at 10 RPM, 200 Lb. (91 kg) at 40 RPM6” to 28” (15 to 71 cm) 40” (102 cm)495 Lb. (225 kg)Fixed Speed Drum Rollers2-5154/10-1 1 or 2 Drums 1 HP 1 115 / 208-230 60 12.8 / 7-6.4 10 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/10-1-50 1 or 2 Drums 1 HP 1 110 / 220 50 12.4 / 6.2 8 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/10-3 1 or 2 Drums 1 HP 3 208-230 / 460 60 3.7-3.4 / 1.7 10 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/10-3-50 1 or 2 Drums 1 HP 3 230 / 400 50 3.1 / 1.8 8 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/10-575 1 or 2 Drums 1 HP 3 575 60 1.4 10 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/10-E1 1 or 2 Drums 1 HP Explosion-Proof *** 1 115 / 230 60 13 / 6.5 10 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/10-E1-50 1 or 2 Drums 1 HP Explosion-Proof *** 1 110 / 220 50 12.4 / 6.2 8 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/10-E3 1 or 2 Drums 1 HP Explosion-Proof *** 3 208-230 / 460 60 3.8-3.6 / 1.8 10 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/10-E3-50 1 or 2 Drums 1 HP Explosion-Proof *** 3 230 / 400 50 3.4 / 2 8 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/10-E575 1 or 2 Drums 1 HP Explosion-Proof *** 3 575 60 1.4 10 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/10-A 1 or 2 Drums Air Motor - - - - 10 1000 Lb. (455 kg) 400 Lb. (182 kg)6” to 28” (15 to 71 cm) 40” (102 cm)440 Lb. (200 kg)2-5154/20-1 1 or 2 Drums 1 HP 1 115 / 208-230 60 12.8 / 7-6.4 20 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/20-1-50 1 or 2 Drums 1 HP 1 110 / 220 50 12.4 / 6.2 16 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/20-3 1 or 2 Drums 1 HP 3 208-230 / 460 60 3.7-3.4 / 1.7 20 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/20-3-50 1 or 2 Drums 1 HP 3 230 / 400 50 3.1 / 1.8 16 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)Please contact your Morse dealermorsedrum.comCopyright 2014 - Morse Mfg. Co., Inc. Spec Sheet F2-5154 (Updated January 27, 2014 1:19 PM) 4MADEINUSAThe Specialist In Drum Handling EquipmentDouble Stationary Drum Rollers2-5154 Series* RPM is based on standard 22.5” (57.15 cm) diameter 55-gallon (208 liter) drum.** A shifting dry load exerts greater stress on the drum roller than the fluid motion of a liquid load.*** Explosion proof models are rated for Class I Group D, and Class II Groups F and G. Variable speed models are NOT available for hazardous areas.† Domestic Ship dimensions: L 102” W 31” H 17” (259 x 79 x 43 cm). Export ship dimensions: L 107” W 29” H 24” (271 x 74 x 61 cm)Install Morse Rotators in accordance with OSHA requirements for enclosure and interlock, etc. For OSHA compliance, see OSHA subpart O.1910.212(a)(4) “Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place.”Power connections and motor controls must comply with applicable codes.Drum Roller Model # Roll Motor Style Phase Volts HzFull Load Amp Draw RPM *Capacity Per Drum Drum DiameterMax. Drum LengthShip Weight †Liquid Dry **2-5154/20-575 1 or 2 Drums 1 HP 3 575 60 1.4 20 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/20-E1 1 or 2 Drums 1 HP Explosion-Proof *** 1 115 / 230 60 13 / 6.5 20 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/20-E1-50 1 or 2 Drums 1 HP Explosion-Proof *** 1 110 / 220 50 12.4 / 6.2 16 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/20-E3 1 or 2 Drums 1 HP Explosion-Proof *** 3 208-230 / 460 60 3.8-3.6 / 1.8 20 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/20-E3-50 1 or 2 Drums 1 HP Explosion-Proof *** 3 230 / 400 50 3.4 / 2 16 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/20-E575 1 or 2 Drums 1 HP Explosion-Proof *** 3 575 60 1.4 20 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)Fixed Speed Drum Rollers (continued)2-5154/20-A 1 or 2 Drums Air Motor - - - - 20 1000 Lb. (455 kg) 300 Lb. (136 kg)6” to 28” (15 to 71 cm) 40” (102 cm)440 Lb. (200 kg)2-5154/30-1 1 or 2 Drums 1 HP 1 115 / 208-230 60 12.8 / 7-6.4 30 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/30-1-50 1 or 2 Drums 1 HP 1 110 / 220 50 12.4 / 6.2 25 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/30-3 1 or 2 Drums 1 HP 3 208-230 / 460 60 3.7-3.4 / 1.7 30 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/30-3-50 1 or 2 Drums 1 HP 3 230 / 400 50 3.1 / 1.8 25 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/30-575 1 or 2 Drums 1 HP 3 575 60 1.4 30 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)445 Lb. (202 kg)2-5154/30-E1 1 or 2 Drums 1 HP Explosion-Proof *** 1 115 / 230 60 13 / 6.5 30 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/30-E1-50 1 or 2 Drums 1 HP Explosion-Proof *** 1 110 / 220 50 12.4 / 6.2 25 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/30-E3 1 or 2 Drums 1 HP Explosion-Proof *** 3 208-230 / 460 60 3.8 / 3.6-1.8 30 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/30-E3-50 1 or 2 Drums 1 HP Explosion-Proof *** 3 230 / 400 50 3.4 / 2 25 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/30-E575 1 or 2 Drums 1 HP Explosion-Proof *** 3 575 60 1.4 30 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)450 Lb. (205 kg)2-5154/30-A 1 or 2 Drums Air Motor - - - - 30 1000 Lb. (455 kg) 250 Lb. (114 kg)6” to 28” (15 to 71 cm) 40” (102 cm)440 Lb. (200 kg)