MPI - DMU-200-QC Series - Drawer Magnet and Housing Quick-Clean - Brochure

Magnetic Products, Inc.683 Town Center Drive,Highland, MI 48357Tel: 248-887-5600Email: info@mpimagnet.com • Website: www.mpimagnet.comDrawer Magnet and Housing Quick-Clean (DMU-200-QC Series)Application:MPI's "Quick Clean" Drawer and Housing Magnetic Separators utilize "Type A" magnetic circuit to remove small to medium sized ferrous contaminant from dry powderor granular free-flowing product streams in gravity-fed vertical chutes. These 200-SERIES QUICK-CLEANING DRAWER MAGNETS (DMU-200-QC) utilize two tiers ofmagnetic tubes for maximum magnetic filtration for protecting processing equipment, such as milling, extruding and mixing machinery, while ensuring high productquality standards with low maintenance.Operation:Product flows through two rows of 1" diameter magnetic tubes, designed to create an extremely effective magnetic circuit. The rows of magnetic tubes are staggered tomaximize magnetic filtration as product flows through the housing. Tramp metal contaminants move to the underside of the magnetic tubes–eliminating tramp metal"wash-off." After terminating the product flow, the magnetic tubes are pulled through the non-metallic UHMW stripper assemblies, cleaning the magnetic tubes anddepositing the metal contaminants outside the product stream into a collection tray.Standard Features: • UHMW stripper seals for increased magnetic strength • Powerful Rare Earth Neodymium-Iron-Boron magnet material • Operating temperatures up to 250 deg. F • 100% Stainless steel construction • Two rows of 1" dia. magnetic tubes on 2" centers, for maximum magnetic filtration • Complete stripping action of magnetic tubes ensures tramp iron release • Easy maintenance and replacement of both magnetic tubes and stripper seals • Tramp iron collection trays Optional Features: • Single and multi-tier configurations and non-standard magnetic tube spacings • Non-standard alloy stainless steel construction • Economical Ceramic 8 magnetic material for less severe tramp iron applications • Inlet and outlet transition adapters, sized to customer specifications • Abrasive resistant and low friction material for magnetic tubes • Non-standard stripper seals for applications not suitable for UHMW Note: Part numbers DMU-210-QC-304-STOCK and DMU-212-QC-304-STOCK are seam-welded inside and outside. Results 1 - 7 of 7Item # Chute Max. Area A Flange Width B DMU AreaOpening CRear Edge toCenter GNo. of MagneticTubes (2 Rows)Weight List PriceDMU-208-QC 16 in²103 cm²12.25 in31.1 cm64 in²162.5 cm²14.5 in36.8 cm7 77 lb34.9 kgQUOTEDMU-210-QC-304-STOCK36 in²232 cm²14.25 in36.2 cm100 in²254 cm²15.5 in39.4 cm9 106 lb48.1 kg$4723.00DMU-210-QC 36 in²232 cm²14.25 in36.2 cm100 in²254 cm²15.5 in39.4 cm9 106 lb48.1 kgQUOTEDMU-212-QC-304-STOCK64 in²413 cm²16.25 in41.3 cm144 in²365.7 cm²16.5 in41.9 cm11 128 lb58.1 kg$5888.008/27/2013 | Page 1 of 2DMU-212-QC 64 in²413 cm²16.25 in41.3 cm144 in²365.7 cm²16.5 in41.9 cm11 128 lb58.1 kgQUOTEDMU-214-QC 81 in²523 cm²18.25 in46.4 cm196 in²497.8 cm²17.5 in44.5 cm13 156 lb70.8 kgQUOTEDMU-216-QC 100 in²645 cm²20.25 in51.4 cm256 in²650.2 cm²18.5 in47.0 cm15 186 lb84.4 kgQUOTE Results 1 - 7 of 78/27/2013 | Page 2 of 2