MS - - PP Cartridge Filter Brochure

MS ® PP Pleated Cartridge Filter General Description MS ® PP pleated cartridge filter is constructed of micro polypropylene media and nonwoven or silk net support. It uses fibers of varying diameters to produce a pore size distribution from coarse (upstream) to fine (downstream) and is all polypropylene for compatibility with a wide range of fluids. The filters have more open area and pores than filters of similar appearance. Adaptors are thermal welded with cartridges without using any glue on it. So there will be no any possibilities to cause the second pollution. Features ? Excellent chemical compatibility, suitable for filtering organic solvents acid bases ? Pleated design increased the filtration area ? Low pressure drop, long service life ? Full range of removal ratingsApplications? Pharmaceutics ? Food and Beverage ? Chemical industry ? Oil industry ? Semiconductor Specifications? Removal rating: 0.1µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, 30µm, 50µm ? Length: 10”, 20”, 30”, 40” ? Outside diameter: 69mm ? Maximum operating temperature: 80?@1 bar, support adaptors are recommended for temperature exceeds 50? ? Maximum operating pressure: 4.0bar@25? ? Maximum operating pressure(Reverse Direction): 2.0 bar@25? ? Maximum temperature sterilization: 5 times, 20 minutes cycles at 120? ? Part Numbers/Ordering Information For Example: CRPP0100223S PP plated cartridge filter, 10”length, 0.22µm, 222/Fin end cap type, silicone seal material CRPP+ Length + Rating +End cap type+Seal material CRPP Rating 001:0.01µm 010:0.1µm 022:0.22µm 045:0.45µm 100:1.0µm 300:3.0µm 500:5.0µm 1000:10µm 2000:20µm 5000:50µm Length 10:10” 20:20” 30:30” 40:40” End Cap Type 2:222/Flat 3:222/Fin 7:226/Flat 6:226/Fin 1:SOE 0:DOE Seal Material S:Silicone E:EPDM F:Viton B:NBR T:Teflon