Nederman Extraction Arm Original Data Sheet (PDF 338 KB)

6The Nederman Original extraction arm is equipped with a hood in a design (patent pending) that ensu-res optimal capturing capacity and manoeuvrability for easy positioning. The arm can be mounted on a ceiling, wall or bench or on an extension bracket. A wide range of accessories gives unlimited pos-sibilities to match the needs at any workspace. This makes Nederman Original to a universal solution wherever dust and fumes must be eliminated in an easy way. The hood in durable material withintegrated start/stop switch for fan and lamp.• Robust swivel - allows 360° rotation• The arm is flexible in all directions and simple to position• Can be mounted on brackets, extention arms, exhaust rails or on fixed or mobile filter equipment• Can be connected directly to a single fan or to a ducted system• Equipped with a damper in the hood - saves energy when not in operationNederman Original An all-round arm for medium applicationsArm lengths: 2, 3, 4V, 4H, 5m* Ducting diameter: Ø160 mmRecommended airflow: 700 - 1000 m3/hMax temp of extracted air: +70°C 4V: 4m Vertical: Long reach for work when the need for extraction at both high and low levels. 4H: 4m Horizontal: Long reach and fits under low ceilings. * 5m: For car body work. Dimensions Original Extraction Arm Pressure drop Original Extraction ArmStatic pressure Pa5 m4 m H4 m V3 m2 mAirflow m3/hArt. No: 2 m: 105542353 m: 105543354 m V: 10554435 4 m H: 105545355 m: 10554935The hood in durable material has integrated lamp and start/stop switch for fan.