Neoptix - Nomad Portable Fiber Optic Thermometer Brochure

QUALITROL® NOMAD Portable fi ber optic thermometer Compact fi ber optic temperature measurement • Easily verify probes throughout installation • Fully functional through front interface • Highly accurate across wide temperature ranges • Captures measurements for later review Product Summary Description Single channel fi ber optic thermometer with large, backlit LCD display. Battery (standard AA batteries) or universal power supply operation. Can log data onto SD fl ash card (2GB max) or directly to laptop using OptiLink™ software. Application Mobile monitoring of Qualitrol Neoptix T2™ temperature probe during or after installation.Fibers by QUALITROL® NOMAD portable fi ber optic thermometer Compact fi ber optic • Fits in hand, battery operated temperature measurement • Rugged casing for every day fi eld and factory use ` Easily verify probes • Maximum user freedom to measure temperature throughout installation at many critical sensing points • No calibration between probes (saves time) Fully functional through • Instrument set up and confi guration, data logging on SD card front interface and expert mode all accessible through display menu • 160 x 160 pixel LCD display with LED backlight Highly accurate across • Accuracy within ± 0.5° C wide temperature ranges • Operates from -20°C to 65°C (-4°F to 149°F) ambient temperature Captures measurements • Data can be saved onto high capacity SD fl ash card for access for later review through any PC with fl ash card reader • Data logging can also be accomplished through OptiLink™ directly to computer hard disk • SnapLog™ feature enables recording of one temperature point with time stamp at the press of a button Temperature IndicationGraphical representation of temperature including historical temperature run chartDirect Data LoggingSave data directly to PCin MS Excel® formatDevice RecognitionAutomatically detectsattached devices (compatible with portable fi ber optic thermometer and optical hot spot module) TECHNICAL SPECIFICATIONS Communications Hardware RS-232 Operating mode OptiLink™ PC software Power supply Batteries 4 x AA alkaline or rechargeable batteries (included) Power supply 100-240 VAC, 50-60 Hz, 0.3 A Power consumption 1.25 watts Environmental Operating temperature -20°C to 65°C (-4°F to 149°F) Storage temperature -30°C to 70°C (-22°F to 158°F), non condensing Enclosure IP54 standard Mechanical Accuracy ± 0.5°C or ± 1% FS Number of channels 1 Temperature -80°C to 300°C (-112°F to 572°F) measurement range Resolution 0.1°C Sampling rate 5 Hz Materials Anodized aluminum extrusion and heavy duty die cast top and bottom end caps painted with textured black powder paint (RAL 9005) Connectors Optical: 1 ST connector Serial: DB-9 Power-in: power jack connector SD card: push-to-eject card slot on top panel Batteries: battery access port on bottom side Weight 1.21 lbs (550 g) without batteries Data logging Memory capacity Temperature plus time and date stamp in ASCII format on removeable SD fl ash card (2GB) or directly to PC ASCII or MS Excel® Record types Running log sessions: user selectable log rate from 1 second to 1 hour SnapLog feature: one datapoint logging when SnapLog key is pushed User interface Display 3 inch diagonal (53mm x 53mm) graphic matrix display, 160 x 160 pixels, transfl ective display, yellow-green LED backlight Firmware Flash ROM upgradable through serial communicationEmail info@qualitrolcorp.comwww.qualitrolcorp.com Warranty 1 year limited International waranty on a return-to-factory basis. Extended warranty available. QUALITROL® NOMAD portable fi ber optic thermometer QUALITROL® Field Services To further improve reliability, QUALITROL provides comprehensive education and on-site commissioning services, maintenance contracts and technical support to all customers worldwide. Emergency response is available on all products and services. About QUALITROL® QUALITROL® Company LLC manufactures substation and transformer monitoring and protection devices used by electric utilities and manufacturing companies. It is the global leader in sales and installations of transformer asset protection equipment, fault recorders and fault locators. Established in 1945, QUALITROL Company produces thousands of different types of products on demand, each customized to customers’ unique requirements. ©2011 QUALITROL® Company LLC, an ISO 9001 system certifi ed company. All rights reserved. Information subject to change without notice. All trademarks are properties of their respective companies, as noted herein. AP-M09-15L-01E.Email info@qualitrolcorp.comwww.qualitrolcorp.com1.30 [32 mm]FIBER OPTIC PROBE CONNECTIONSD CARD PORTTOP1.46 [37 mm]BATTERY ACCESS PORTPOWER SUPPLY INPUTSERIAL PCCONNECTIONBOTTOM4.65 [118 mm]7.32 [186 mm]BACKLIT GRAPHICAL DISPLAY