Netafim - Nylon and PVC Valves - Brochure

WASTEWATER DIVISIONAPPLICATIONS? Headworks assemblies for use in advanced treatment wastewater drip dispersal systems? Ideal for water control in all piping networks? Above or below grade installations? Remote control irrigation for master valves and automated or manual operations? Nylon valves are ideal for mild corrosive and acidity levels in the water? PVC Valves are ideal for higher corrosive and acidity levels in the waterSPECIFICATIONS? Recommended Operating Pressure (psi): Nylon - 12 minimum to 145 maximum PVC - 12 minimum to 115 maximum (based on valve size - see chart)? Maximum Water Temperature: 140° F ? Optional Functions: Manual, Electric, Pressure Reducing, Pressure Sustaining MATERIALS? Nylon Valve Body, Bonnet, Seat: Glass Reinforced Polyamide (GRP) ? PVC Valve Body: uPVC? Spring: Stainless Steel (AISI 302)? Nuts, Bolts, Washers: Zinc Coated Steel (BS 5216)? Diaphragm: Natural Rubber? Connections: Threaded - ANSI (NPT Female) Socket - IPS, PVC StandardPRODUCT ADVANTAGES? Superb hydraulic performance. ? Simple design with only one moving component, the diaphragm, means parts are not located in the water passage way. ? Low operating pressure. ? Simple inline installation with minimal maintenance requirements for maximum dependability. ? Durable, corrosion-resistant materials provide high resistance to corrosive water containing fertilizers and chemicals. ? Nylon valves have threaded connections. ? PVC valves have threaded or socket (slip) connections allowing pipes to be cemented into the valves. HIGH FLOW, LOW FRICTION LOSS AND MINIMUM SERVICING FOR A BROAD RANGE OF APPLICATIONSNYLON AND PVCVALVESMANUAL NYLON THREADED VALVEPRESSURE REDUCING ELECTRIC NYLON THREADED VALVEMANUAL PVCSLIP VALVEPRESSURE REDUCINGPVC THREADED VALVEMATERIAL NYLON PVCCONNECTION THREADED THREADED SLIPAVAILABLE MODELS & SIZES1”1 ½”2”3233”4”6”XXXX-------X------XXXSIZESMANUAL VALVE OPERATION WITH A 3-WAY SELECTOR? CLOSED (C): Upstream pressure or pressure from an external source is applied to the control chamber. Initiated by the spring, the diaphragm is pressed down to close the valve drip-tight. ? OPEN (O): Relieving the water or air pressure to the atmosphere from the control chamber causes the valve to open. ? AUTOMATIC (A): The automatic port of the 3-Way selector is connected to a solenoid, hydraulic relay or pilot which controls the valve. The common port of the 3-Way selector connects the control chamber to either A, O or C, depending on the direction the selector is pointed. VALVE INSTALLATION TIPS? THREADED VALVES: Use a few layers of Teflon sealer compound on the adapter and tighten by hand. Use a wrench to tighten the adapter another half revolution. ? SOCKET OR ‘SLIP’ VALVE WITH PVC PIPE: Use the same procedure as when cementing PVC pipes. Mark the pipe first, then apply glue to the socket of the valve and the PVC pipe. Insert the pipe until reaching the mark and rotate a quarter turn. Hold the joint in place until the cement hardens. ? INSTALLATION ABOVE GROUND: When installing a manifold above ground, the length of the manifold should be kept as short as possible (this eliminates the need for additional support). For longer lengths, a firm support under the horizontal pipes is recommended. Always install the valve with the bonnet exposed to the sun. AOCAOCAOCCLOSED OPENAUTOMATICCOMMON PORTAOCNYLON VALVE SHOWNBONNETSPRINGSPRING SEATDIAPHRAGMBODYNUTPLUGSHORT BOLTLONG BOLTFLOW RATE VS. PRESSURE LOSSHEADLOSS (PSI)FLOW (GPM)11.52345650 60 80 100 150 200 300 400 500 700 900 1,300 1,700GREY AREA INDICATES RECOMMENDED OPERATING RANGE6”2”4”1 ½”2 ½”3233”H (psi) = ( Q (GPM) ) ² CvSIZE1”1 ½”2“ 3233” 4“6”MAX. FLOW(GPM)441101761763964401,540Cv186683103175250554OPERATINGPRESSURE (psi) *12 - 11512 - 14512 - 14512 - 14512 - 11512 - 11512 - 145* Low Pressure Diaphragms also availableSPECIFICATIONSDIMENSIONS & WEIGHT1” NYLON THREADED1 1/2” NYLON THREADED2” NYLON THREADED323 NYLON THREADED **3” PVC THREADED3” PVC SLIP4” PVC SLIP6” PVC SLIPSIZE/CONNECTION4 7/8”7 3/8“7 7/8”9 1/4“10 1/8”10 1/8“11”14“LENGTH2 7/8”4 3/8“4 3/8”4 3/4“7 5/8”7 5/8“8”15“HEIGHT0.4 LBS.2.0 LBS.2.2 LBS.3.1 LBS.9.3 LBS.9.3 LBS.9.5 LBS.20 LBS.WEIGHT ** Weight for Basic Valve** Refers to a 2” Valve body with a 3” inlet and outlet3-WAY CONTROL VALVESThe 3-Way control valve only ports water (or air) into the control chamber to close the valve or releases it from the control chamber to open the valve. This non-continuous porting technique allows for full opening of the main valve when operating conditions require the valve to be fully open. REFER TO WASTEWATER PRICE LISTFOR ORDERING INFORMATION FOR3-WAY VALVESORDERING INFORMATION1” ELECTRIC PBI THROTTLING NYLON VALVE323 ELECTRIC PBITHROTTLING NYLON VALVE2-WAY ELECTRIC VALVESPRODUCT ADVANTAGES? Durable, glass reinforced nylon construction provides superb hydraulic performance. ? Large internal water passage with no moving parts in the flow path prevents clogging. ? Built-in 2-Way Solenoid with low power requirement for ease of operation and reliability. ? Simple installation either vertically or horizontally. ? High resistance to corrosive water containing fertilizer and chemicals. ? Standard with a flow control (throttling) handle. APPLICATIONS? Ideal for mild corrosive and mild acidity levels in the waterSPECIFICATIONS? Available Sizes: 1”, 1 1/2”, 2” and 323? Maximum Working Pressure: 1” - 115 psi and 2” to 323 - 150 psi? Maximum Water Temperature: 140° F? Connections: Female Threaded NPT? Electrical Specifications: Voltage - Standard 24 VAC, 60 Hz Inrush Current - 29mA Holding Current - 14mA Allowable Voltage Variation: 10%MATERIALS? Body and Bonnet: Glass Reinforced Nylon? Spring: Stainless Steel (AISI 302)? Nuts, Bolts, Washers: Stainless Steel (304)? Diaphragm: Natural RubberFLOW RATE VS. PRESSURE LOSSLIGHT PURPLE AREA INDICATES RECOMMENDED OPERATING RANGE.3476581010 15 20 30 40 50 60 80 100 150 200HEADLOSS (PSI)FLOW (GPM)1”3232”1 ½”DIMENSIONS & WEIGHT1” 1 1/2”2” 323SIZE4 7/8”7 3/8“7 7/8”9 1/4“LENGTH4 7/8”6“6”6 5/8“HEIGHT.5 LBS.2.0 LBS.2.2 LBS.3.1 LBS.WEIGHTFLOW RANGE1” 1 1/2”2” 323SIZE1 - 501 - 1251 - 1751 - 225GPMORDERING INFORMATION1” 1 1/2”2” 323SIZE71610-01401571610-01404071610-01450771610-015202ITEM NUMBER61ET1PBI-BC61ET1.5PBI2-BC61ET2PBI2-BC61ET323PBI2-BCMODEL NUMBERSOLD IN CASE QUANTITIES AND 24VAC ONLY1” CASE QUANTITY = 201 1/2” AND 2“ CASE QUANTITY = 8323 CASE QUANTITY = 42-WAY CONTROL VALVESThe 2-Way control valve continuously ports water into and from the control chamber, making it an excellent choice when a very accurate and sensitive regulation performance is required. The 2-Way valves may be used with clean water when a minimal pressure difference is allowed and a fast, accurate response is required. W069 01/13NETAFIM USA 5470 E. HOME AVE.FRESNO, CA 93727CS 888 638 2346www.netafimusa.comSERIES 80 2-WAY ELECTRIC VALVES¾” & 1” GLOBESERIES 80 2-WAY1 ½” & 2” ANGLE SERIES 80 2-WAY1 ½” & 2” GLOBESERIES 80 2-WAY PRODUCT ADVANTAGES? Suitable for high pressure applications with quick reaction to opening and closing. ? Exceptionally low inrush and holding current allows the longest wire run from valve to controller. ? Quick reaction to opening and closing and a drip-tight seal for accurate irrigation. ? Stable solenoid to voltage fluctuations with low sensitivity to dirt - no diode solenoid.? Integrated check valve ensures valve remains closed until the controller designates opening.? Flow control stem allows manual control from full closure up to maximum capacity. APPLICATIONS? Ideal for mild corrosive and mild acidity levels in the waterSPECIFICATIONS? Recommended Flow Ranges: ¾” valve - .01 to 26 GPM 1” valve - .01 to 44 GPM 1 ½” valve - .25 to 110 GPM 2” valve - .25 to 176 GPM? Valve Configurations: ¾” & 1” valves - Globe 1 ½” & 2” valves - Globe or Angle? Minimum Operating Pressure: 7 psi? Maximum Operating Pressure:150 psi? Maximum Water Temperature: 140° F? Standard Solenoid Voltage: 24VAC + 10% voltage? Solenoid Inrush Current: .22A ? Solenoid Holding Current: .095AMATERIALS? Body, Bonnet, Diaphragm Seat: Glass Reinforced Polyamide (GRP) ? Nuts, Bolts, Washers: Stainless Steel 304? Spring: Stainless Steel AISI 302DIMENSIONS & WEIGHTSIZE3/4” GLOBE1” GLOBE1 ½” GLOBE1 ½” ANGLE2” GLOBE2” ANGLE3 15/16”4 1/8”6 9/16”3 1/2”6 9/16”3 1/2”3”3”6 1/2”6 1/2”6 1/2”6 1/2”4 3/8”4 1/2”6 3/8”6 13/16”6 5/8”6 13/16”.62 LBS.64 LBS2 LBS1.8 LBS2 LBS1.8 LBSLENGTH WIDTH HEIGHT WEIGHTORDERING INFORMATION STANDARD 24VAC VALVES00135-00099500135-00100500135-00101500135-00101600135-00102500135-001026ITEM NUMBERLVET.75GH2LVET1GH2LVET1.5GH2LVET1.5GH2-ANLVET2GH2LVET2GH2-ANMODEL NUMBERVALVE SIZE¾” GLOBE1” GLOBE1 ½” GLOBE1 ½“ ANGLE2” GLOBE2“ ANGLE¾” & 1” FLOW RATE VS. PRESSURE LOSS FLOW RATE (GPM)PRESSURE LOSS (psi)141210864202 4 8 12 16 20 24 28 30 36 40 441” Globe¾” Globe20 40 60 80 100 120 140 160 18016141210864201½” & 2” FLOW RATE VS. PRESSURE LOSSFLOW RATE (GPM)PRESSURE LOSS (psi)1½” Globe1½”Angle& 2” Globe2” Angle