Oil Only Absorbents Material Safety Data Sheets (MSDS)

MELTBLOWN TECHNOLOGIES / MATERIAL SAFETY DATA SHEET: #MBT/M512 __________________________________________________________________________________________ Material Name: Melt Blown Non-Woven Roll Goods & Sorbents Material Safety Data Sheet Section 1 – Chemical Product and Company Identification Product Name: Melt Blown Non-Woven Roll Goods CAS#: various Generic name: Polyolefin Melt Blown Formula: Mixture Chemical Name: Polyolefin Hazard Label: None Required Trade Names: SOCK AND NET ABSORBENT BOOM Section 2 – Composition / Information on Ingredients Additional Component Information: The products listed in Section 1 are articles under OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and do not require a material safety data sheet or hazard warning label. An article is a manufactured item which is formed to a specific shape or design which has end-use function(s) dependent in whole or in part upon its shape or design during end use; and which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical and does not pose a physical hazard or health risk to employees. Contains less than 1% zinc-coated metal fasteners and/or aluminum staples. Section 3 – Hazards Identification Emergency Overview APPEARANCE AND ODOR: White or colored melt-blown non-woven material. No significant odor. Under normal conditions of use, this product is not expected to create any unusual emergency hazards at ambient temperatures (-18 to +38 degrees C / 0 to 100 degrees F). Solid material, may burn at or above 316 degrees C / 600 degrees F. In the event of fire, use normal fire fighting procedures to prevent inhalation of smoke and gases. Potential Health Effects Summary: The products listed in Section 1 are articles under OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and do not require a material safety data sheet or hazard warning label. Ana article is a manufactured item which is formed to a specific shape or design which has end-use function(s) dependent in whole or in part upon its shape or design during end use; and which under normal conditions of use does not release more than very small quantities, e.g., minute or trace amounts of a hazardous chemical and does not pose a physical hazard or health risk to employees. Page 1 of 4 Material Name: Melt Blown Non-Woven Roll Goods & Sorbents Material Safety Data Sheet Inhalation Not applicable Skin Not applicable Absorption Not applicable Ingestion Not applicable Eyes Not applicable Target Organs None Primary Routes of Entry (Exposure) None Medical Conditions Aggravated by Exposure None Section 4 – First Aid Measures First Aid: Inhalation Not applicable First Aid: Skin Not applicable First Aid: Ingestion Not applicable First Aid: Eyes Not applicable First Aid: Notes to Physician None Section 5 – Fire Fighting Measures Flash Point: >316 degrees C / 600 degrees F Method Used: Not determined Upper Flammable Limit (UFL): Not determined Lower Flammable Limit (LFL): Not determined Auto Ignition: >302 degrees C / 575 degrees Flammability Classification: Not determined Rate of Burning: Not determined General Fire Hazards: Not a fire hazard. Extinguishing Media: Carbon dioxide (CO2), water, water fog, dry chemical. Fire Fighting Equipment/Instructions: Wear full protective clothing, including helmet, self-contained positive pressure or pressure demand breathing apparatus, protective clothing and face mask. Section 6 – Accidental Release Measures Containment Procedures: Pick up large pieces. Vacuum dusts. If sweeping is necessary, use a dust suppressant such as water. Do not dry sweep dust accumulation. These procedures will help to minimize potential exposures. If a water spill occurs skim material from surface and advise authorities if floating material enters a watercourse or sewer. For land spills: eliminate sources of ignition; recover spilled material and place in suitable containers for recycle or disposal. Clean-Up Procedures Wastes are not hazardous as defined by the Resource Conservation and Recovery Act (RCRA; 40 CFR 261). Comply with state and local regulations for disposal of these products. If you are unsure of the regulations, contact you local Public Health Department, or the local office of the Environmental Protection Agency (EPA). Section 7 – Handling and Storage Handling Procedures Electrostatic accumulation hazard. Use proper grounding procedure. Storage Procedures Warehouse storage should be in accordance with package directions, if any. Material should be kept dry and protected from the elements. Page 2 of 4 Material Name: Melt Blown Non-Woven Roll Goods & Sorbents Material Safety Data Sheet Section 8 – Exposure Controls / Personal Protection Exposure Guidelines A: General Product Information No special protective measures are necessary for use of the products listed on this material safety data sheets. These products are articles; under normal conditions of use they are not expected to release or otherwise result in exposure to hazardous chemicals. B. Component Exposure Limits This material has no components listed. PERSONAL PROTECTIVE EQUIPMENT: Personal Protective Equipment: Eyes/Face Not applicable Personal Protective Equipment: Skin Not applicable Personal Protective Equipment: Respiratory Not applicable Ventilation: Not applicable Personal Protective Equipment: General Section 9 – Physical & Chemical Properties Appearance: White or colored melt blown non-woven material Odor: No odor Physical State: Solid pH: Not applicable Vapor Pressure: Negligible Vapor Density: Not applicable Boiling Point: Not applicable Melting Point: >107 degrees C / 225 degrees F Solubility (H2O): Insoluble Specific Gravity: Varies by grade Freezing Point: Not applicable Evaporation Rate: Not applicable Percent Volatile: Not applicable VOC: Not applicable Section 10 – Chemical Stability & Reactivity Information Chemical Stability: This is a stable material. This product is not reactive. Chemical Stability: Conditions to Avoid Temperature above 249 degrees C / 480 degrees F may cause material degradation. Hazardous Polymerization: Will not occur. Section 11 – Toxicological Information Acute Toxicity A: General Product Information Because it will not release, or otherwise result in exposure to a hazardous chemical under normal conditions of use, this product is not expected to cause any acute toxicological effects. B: Component Analysis – LD50/LC50 This material has no components listed. Carcinogenicity A: General Product Information The occupational Safety and Health Administration (OSHA), National Toxicology Program (NTP), International Agency for Research on Cancer (IARC), and American Conference of Governmental Industrial Hygienists (ACGIH) have not classified this product in its entirety as a carcinogen. B: Component Carcinogenicity This material has no components listed. Chronic Toxicity: No chronic health effects are expected from the normal use of this product. Section 12 – Ecological Information Ecotoxicity: A: General Product Information No data available for this product. Page 3 of 4 Material Name: Melt Blown Non-Woven Roll Goods & Sorbents Material Safety Data Sheet B: Component Analysis – Ecotoxicity – Aquatic Toxicity This material has no components listed. Section 13 – Disposal Considerations US EPA Waste Number & Descriptions A: General Product Information: This product is not regulated as a hazardous waste by the U.S. Environmental Protection Agency (EPA) under Resource Conservation and Recovery Act (RCRA) regulations. Material should be recycled if possible. B: Component Waste Numbers This material has no components listed. Disposal Instructions Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations. Section 14 – Transportation Information US DOT Information Shipping Name: Not Regulated for Transport. Section 15 – Regulatory Information US Federal Regulations A: General Product Information No information on this product as a whole. B: Component Analysis This material has no components listed. State Regulations A: General Product Information No information available. B: Component Analysis – State This material has no components listed. Other regulatory Information A: General Product Information No information available for the product. B: TSCA Status This material has no components listed. Component Analysis – WHMIS IDL This material has no components listed. Section 16 – Other Information Other Information The information herein is presented in good faith and believed to be accurate as of the effective date given. However, no warranty, expressed or implied, is given. It is the buyer’s responsibility to ensure that its activities comply with Federal, State or provincial and local laws. Contact information: MBT 770-754-0600 fax: 770-754-0550 Page 4 of 4