OmniDEL Triple (E) Electric Automatic Triple Binlift Brochure

OmniDEL Triple~eOmniDEL Triple~ebinlifts | sideloaders | weighing & ID | data solutionsLow Voltage, Low-Level Triple Automatic BinliftElectricOmniDEL Triple is a low voltage, triple electric bin lift with a proven heritage offering robust build, safe operation & minimal maintenance. The OmniDEL Triple shares its mechanical design components, efficiency saving features and safety enhancing benefits with the standard OmniDEL Triple but requires only 24v chassis electrical power for operation of its three bin lift chairs that make it the ideal choice for all 70/30 split RCV bodies;n Environmentally friendly performance as standardDesigned to be compatible with future developments in electric & hybrid RCV technologies, the OmniDEL Triple is equally compatible with diesel powered RCV’s but because it relies on electrical power alone offers significant savings in fuel consumption and CO emissions.2n Practically silent operationThe OmniDEL Triple is extremely quiet, producing less than 57 dB(A) of noise in operation. Combined with its ability to operate without the engine running this is great news for light sleepers.n Minimal chassis and body preparationRequiring only electrical power, the OmniDEL Triple negates the need for a second pump on vehicle chassis’ & requires no hydraulic preparation. OmniDEL Triple therefore offers a straightforward ‘bolt on, plug in & play on’ system to significantly reduce fitting times & body preparation costs.n Reduced maintenance and increased durabilityVibration resistant IP69K automotive components, bearing protection systems & contact-less wear-free angle sensors offers superb resistance to steam cleaning duties & the harsh environment of modern bin collections.n Complete spillage protection systemOmniDEL Triple incorporates a unique sonar sensor anti-spillage system and tough extensions to the clamp and hopper plate. The sonar sensor system detects materials that are not fully discharged & automatically shakes the ‘offending’ bin until discharged. The extended clamp & hopper plate sections overlap during discharge to provide a continuous platform that directs any potential spillage into the hopper.n Designed with dynamic weighing and RFID in mindThe OmniDEL Triple is designed to integrate easily with weighing and identification systems, has a smooth operation to minimise ‘bin bounce’ and a vertical initial lift providing a ‘window’ for ease of data recording.3n Lightweight design, heavyweight performanceThe OmniDEL Triple bin lift weighs in from as little as 845kg.n ’Plug and Play’ wiring connections reduce downtimeThe OmniDEL Triple is designed to reduce downtime during unlikely repair work. All connections are ‘Plug and Play’ and easy to access, making replacement of defective components and/or wiring simple and fast. An intelligent diagnosis system simplifies the fault finding process.n Automatic Mode ChangeoverOmniDEL Triple features automatic cycle mode changeover on its twin chair section easing the operation. As trade containers are presented, the intelligent control system selects ‘trade’ mode & the catcher bar moves to the correct position. Both chairs are levelled/raised to the optimum height & the lift engages the bin to allow a safe, manually controlled cycle.n Single Point GreasingA single point greasing system is fitted as standard offering reductions in maintenance times, grease lines are protected from damage & provide grease to all ten lubrication points. n Smooth, two-stage soft liftThe OmniDEL Triple has a controlled two-speed lifting cycle with a safe, smooth & reliable bin pick up that reduces mechanical stress on bins and the bin lift system.Unique Terberg GeometryTerberg’s unique bin lift geometry gives a container tip angle of 50° ensuring that ‘sticky’ materials are discharged & eliminates bin ‘kick out’ during lifting to reduce the likelihood of injury.~e~e ~e ~e ~e~e~e~e~e~e~e~ennnnnnnnnnnnnnnnnnnnnnnnnn Rear Protection Device (RPD)Rear underwalk protection as standard ensures compliance with the requirements of EN1501.5. The sensor arrangement ensures that bin lift chair movement is frozen if a person (or obstruction) is detected inside the functional working area and the container is above 1000mm.nTerberg Machines B.V. reserve the right to change the specification or design of our equipment at any time without prior notificationTerberg Matec UK Ltd, Leacroft Road,Birchwood, Warrington, Cheshire, WA3 6PJ.Tel > +44 (0) 1925 283 915Fax > +44 (0) 1925 283 905E-mail: sales@terberg.co.ukOmniDEL Triple ~e - Rev. 2 EN UK - June 2012 Terberg Machines B.V, Postbus 127,3400 AC IJsselstein (U), Holland.Tel > (31) 30 2100 600Fax > (31) 30 2100 610E-mail: info@terbergmachines.nlThe electrical specifications listed aboverepresent the most common configurations, however, certain chassis/body combinationsmay require these to be modified.Terberg engineering should always beconsulted prior to commencing anypreparation work.technical specificationsOmniDEL Triple~e˜-standard ž ™-not available -option Painted to customer specification120019903001364150090012005002600Painted finish > <57 db (A) Noise level: > Auto > 2-wheel containers 6.0 secs (+dwell 0.5-1.5) / Manual > 12.0 secs Cycle time > proximity switches/sensors to IP68, ‘Plug and Play’ wiring to IP69K Waterproof ratings > 16-pin / 24vElectrical connection to body > electric Power source > 845kgs Weight > 100kgs split / 500kgs linked Lifting capacity > žPacker Cycle Delay Control (PCDC) > ˜Single point greasing system > ˜EN840.3 containers (770-1300 ltr.) > ˜EN840.2 containers (500-1200 ltr:) > ˜EN840.1 containers (80-390 ltr:) > žTerberg Weighing & RFID preparation > ˜Sonar Sensor Anti-Spillage System > žMechanical N1 Switch > ˜Sonar N1 Switch > ˜Diagnostic display > ˜4-wheel container recognition > Rear Protection Device (RPD) > ˜ Single Man Trade (SMT) > SingleChair configuration > CleAN Open CANbus output > žChassis battery requirement > Chassis alternator requirement > 175 Ah minimum, ideal 245Ah (for hybrid chassis please consult Terberg)Requires 20A spare capacity. Minimum 75A, 100A recommendedwww.terbergmatec.comSingle Chair Section Twin Chair SectionTwin˜ ™˜ž˜ž˜™™˜ž 100kgsSafety > CE machinery directive certification andEuropean Norms EN1501.1 & EN1501.5˜ ˜ Page 1 Page 2