OmniTRADE - E - Heavy-Duty Low Voltage, Electric Trade Binlift Brochure

OmniTRADE~eLow Voltage, Heavy Duty Trade BinliftElectricOmniTRADE~eThe OmniTRADE is a low voltage, electric trade binlift with proven heritage offering robust build, safe operation & minimal maintenance. OmniTRADEshares mechanical design components and an array of features with the standard OmniTRADE but requires only 24v chassis electrical power for operation; n Environmentally friendly performance as standardCompatible with future developments in electric & hybrid RCV technologies, the OmniTRADE is equally compatible with diesel powered RCV’s but because it relies on electrical power alone offers significant savings in fuel consumption and CO emissions.2n Practically silent operationThe OmniTRADE is extremely quiet, producing less than 57 dB(A) of noise in operation and can operate without the engine running.n Minimal chassis and body preparationThe OmniTRADE negates the need for a second pump on vehicle chassis’ & requires no hydraulic preparation, offering a straightforward ‘bolt on, plug in & play on’ system to significantly reduce fitting times & body preparation costs.n Choice of interfaceThe OmniTRADE is available as a one-piece lift with its own integral mounting frame, or as a two-part lift suitable for mounting onto a body builder prepared frame. Two width variants are available; 2.2m or 2.5m wide.n Low weightThe OmniTRADE bin lift weighs as little as 710kg with the integral mounting frame (subject to specification).n Unique OmniBALANCE hydraulicsThe OmniTRADE unique and patented hydraulic system ensures that the lifting cycle is smooth, safe and controlled at all times.n Reduced overhang and Centre of Gravity projectionThe combination of low weight, a reduced overhang and a CoG projection of only 100mm, help OmniTRADE minimise rear axle overloading.n Smart design reduces downtimeThe OmniTRADE reduces downtime during unlikely repair work by employing maintenance free ultrasonic sensors for SMT and four wheeled recognition, low maintenance bearings and stainless steel axles representing a reliable, low maintenance solution with reduced whole life costs.n ’First movement’ button stationFor ease of use the OmniTRADE is fitted with a ‘first movement’ button station on the lifting frame. Once a container is ‘engaged’, control is passed over to the main control panel mounted outside of the restricted lifting zone.n Single Man Trade (SMT) optionTo aid one man operation the OmniTRADE is supplied with SMT, a feature that enables containers to be automatically ‘engaged’ before control is passed to the manual button station.n Easy hand loadingThe OmniTRADE profiled, full width hopper plate lowers with minimal effort to cover the OmniTRADE ’s heavy duty bin lift comb/chair and provides genuine ‘open back’ hand loading.n Two stage soft lift for ease of operationThe OmniTRADE is designed with a progressive soft lift action to enable easy handling and container location.n SafetyTerberg’s unique geometry ensures that containers are not kicked back towards operators during lifting. Folding safety arms conform to EN1501.1 and provide guarding against entry into the functional working space during operation.n Designed with dynamic weighing and RFID in mindThe OmniTRADE is designed to integrate easily with weighing & identification systems, has a smooth operation to minimise ‘bin bounce’and a vertical initial lift providing a ‘window’ for ease of data recording.~e~e ~e ~e ~e~e~e~e~e~e~e~e~e~e~e~ennnnnnnnnnnnnnnnnnnnnnnnnnnnbinlifts | sideloaders | weighing & ID | data solutionsOmniDEL~e - Rev. 2 EN UK - April 2011 The electrical specifications listed aboverepresent the most common configurations, however, certain chassis/body combinationsmay require these to be modified.Terberg engineering should always beconsulted prior to commencing anypreparation work.˜-standard ž ™-not available Heavy duty bar comb chairSBC10˜ ˜˜ž˜˜˜˜500kgs (5000N)710kgs (with mounting frame)electric 16-pin / 24vRequires 20A spare capacity. Minimum 75A, 100A recommendedProximity switches/sensors to IP68 <57db (A) Chair configuration > Control system >Single Man Trade (SMT) >4-wheel container recognition > ‘First movement’ button station >Terberg Weighing & RFID preparation > EN840.1 containers (80-390 ltr:) > EN840.2 containers (500-1200 ltr:) > EN840.3 containers (770-1300 ltr.) > Lifting capacity > Weight > Power source > Electrical connection to body > Chassis alternator requirement > Waterproof ratings > Cycle time > Noise level: > Safety > -option Terberg Matec UK Ltd. reserve the right to change the specification or design of our equipment at any time without prior notificationTerberg Matec UK Ltd, Leacroft Road,Birchwood, Warrington, Cheshire, WA3 6PJ.Tel > +44 (0) 1925 283 915Fax > +44 (0) 1925 283 905E-mail: sales@terberg.co.ukManual > 4-wheel containers 12.0 secs / 2-wheel container 10.0 secsPaladin containers with conversion bars > OmniTRADE~e - Rev. 1 EN UK - Apr 2012 technical specificationsTerberg Machines B.V, Postbus 127,3400 AC IJsselstein (U), Holland.Tel > (31) 30 2100 600Fax > (31) 30 2100 610E-mail: info@terbergmachines.nlChassis battery requirement > 175 Ah minimum, ideal 245Ah (for hybrid chassis please consult Terberg)CE machinery directive certification andEuropean Norms EN1501.1 & EN1501.5OmniTRADE~ewww.terbergmatec.com430460 Page 1 Page 2