Orbital GF 4 (AVM/MVM) Tube and Pipe Machining Brochure

MVMAVMPipe Cutting and Beveling Machines withAutomatic Feed Module AVMPreparing pipes at the touch of a buttonThis intelligent solution continuously controls the cutting speed depending on the torque and the para-meter settings. The automatic pipe cutting module AVM improves the handling of the GF- and RA machine and stops automatically after the cutting process. The restart inhibit does not allow an unintended start-up. precision.power.simplicity.www.orbitalum.comPipe Cutting and Beveling Machines with Manual Feed Module MVMPreparing pipes manuallyThis manually operated feed module facilitates the cutting and beveling of pipes. Via a hand wheel, the machine head is rotated around the pipe easily and with little effort. Your benefits by using the feed modules AVM/MVM:• Increased productivity• Improved cutting quality• Increased service life of tools• Reduced operator impact• Follows all EN and safety requirementsBoth feed modules AVM/MVM are available with the following Pipe Cutting and Beveling Machines made by Orbitalum Tools:l AVMl MVM„The intelligent solution for a precise and automatic pipe cutting process„„Cutting pipes easily with the help of a hand wheel„RA 6 MVM RA 6 AVM RA 8 MVM RA 8 AVM RA 12 MVM RA 12 AVM GF 20 AVM* GF 4 MVM GF 4 AVMThe perfect addition for the RA- and GF pipe cutters made by Orbitalum Tools:* GF 20 only available with AVM.Automatic/Manual Feed Modules AVM/MVMApplication range AVM/MVM with GF 4 GF 20* RA 6 RA 8 RA 12 Pipe OD [mm]Pipe OD [inch]12 - 1200.472 - 4.724283 - 50811.14 - 2044** - 1821.732** - 7.165114 - 2304.488 - 9.055154 - 3256.063 - 12.795Wall thickness, depends on material [mm]Wall thickness, depends on material [inch]1 - 90.039 - 0.354max. 15max. 0.592 - 100.079 - 0.3942 - 100.079 - 0.3942 - 100.079 - 0.394Pipe ID min. (saw blade Ø 63 mm/2.480") [mm]Pipe ID min. (saw blade Ø 63 mm/2.480") [inch]210.827––762.9921375.3941857.283Pipe ID min. (saw blade Ø 68 mm/2.677") [mm]Pipe ID min. (saw blade Ø 68 mm/2.677") [inch]160.630––712.7951325.1971766.929Pipe ID min. (saw blade Ø 80 mm/3.150") [mm]Pipe ID min. (saw blade Ø 80 mm/3.150") [inch]40.15729511.6592.3291204.7241646.457Pipe ID min. (saw blade Ø 100 mm/3.937") [mm]Pipe ID min. (saw blade Ø 100 mm/3.937") [inch]––27510.8391.5351013.976 1445.669Cutting speed [rpm] 65 - 215 50 - 163 150 - 270 150 - 270 150 - 270Technical data AVM MVMWeight 10.2 kg22.5 lbs3.5 kg7.7 lbsPower 50 W –Versions AVM 200 - 240 V, 50/60 Hz or 100 - 120 V, 50/60 Hz* GF 20 only available with AVM.** Special clamping jaws must be installed for pipes with an outer diameter (OD) of < 85 mm (3.346 inch). These are already delivered with the RA 6 (H).AVM_MVM__EN_00__digitHigh performance lubricants for pipe cutting and bevelling, to in-crease the life of the saw blades.GF TOP, Tube, 180 g: Code 790 060 228.ROCOL, Tube, 150 ml: Code 790 041 016.A wide range of saw blades and bevel cutters are available, designed to maximise the quality of cut and provide the longest service life possible.Aluminum clamping shellsFor GF 4, GF 20, RA 41 Plus, RA 6, RA 8, and RA 12. For deformation-free clamping of thin-walled tubes. A wide range of INOX-, aluminum- and Tempered cast steel clamping jaws for preparation of stainless steel and aluminum tubes and pipes.Very sturdy and stable pipe feeder: feeds accurately long and heavy pipes into GF- and RA machines.Base unit: Code 790 068 051Extension unit: Code 790 068 061Info-Hotline: +49 (0) 77 31 792-787 up to 789© Orbitalum Tools GmbH | An ITW Company | 11.2008Josef-Schüttler-Straße 17, 78224 Singen, Germany, Phone +49 (0) 77 31 792-0, Fax +49 (0) 77 31 792-524www.orbitalum.com, tools@orbitalum.comStamp of distributor:The technical data are not binding. They are not warranted characteristics and are subject to change. Please consult our general conditions of supply.Cutting high-alloy steel (stainless steel), low- and unalloyed steel, casting materials and non-ferrous metals in just seconds, using the patent-registered “Planetary Cutting” method – with the RA and GF Pipe saws made by Orbitalum Tools“The AVM/MVM is only available as a factory fitted option, it is not available as a retrofit option.The automatic and manual feed module AVM/MVM is already fitted to the pipe cutter upon delivery.