OXITEC - 5000 ECONOMY - Oxygen Analyser System Brochure

ENOTECOXITEC® 5000 ECONOMYOxygen Analyser System ENOTECTechnical Data ProbeMeasuring principle: Zirconia oxide sensorMax. flue gas temperature: 400 °C / 1400 °C (*with cooling tube)Immersion length: 300, 400, 500, 800 mm (400 °C version) 500, 1000 mm (1400 °C version)Material: ss 316 Ti/ss 304 (1.4571 /1.4301)Flange: Equal to DN 65 PN6Flue gas velocity: max. 25 m/secPressure: -50 mbar to +50 mbar relativeResponse time: 0,5 sec @ 10 m/sec flue gas velocityElectrical connection: Quick disconnect plug & socketProtection: IP 65Interconnecting cable: 6 m, 12 m, 18 m, 24 m, 30 m, other length on requestFor high dust loading (400°C) probes with an immersion depth of 400mm, 500mm and 800mm are available.* The OXITEC® 5000 Economy System can be used in some selected higher temperature applications to 1400 °C. The Economy System is intended and suitable for use in relative clean-gas applications only.Technical Data ElectronicConstruction: Sheet steel housing with windowDimensions: 400 mm x 300 mm x 225 mmProtection: IP65Weight: 5 kg approx.Supply voltage: 115 V or 230 V, 50/60 HzPower consumption: 100 - 200 VA (350 VA during start-up)Series fused recommended: 10 AAmbient tenmperature: -10 °C to +45 °CImmunity from disturbance: according EMVG and low-voltage directive 72/73 EWG EN 55011 cl.B (1998) EN 61000-6-2 (2001)Measuring range: 0 to 99% freely adjustableOutput: 0/4 to 20 mA, potential free, 500 ohm max. loadStatus signal: System fault, MaintenanceDisplay: LCD LED illuminates 240 x 64 points graphic displayOptionsInterface: RS 232O2 Alarms: 2 separate outputs; each programmable for High or Low O2 valuesOXITEC® 5000 ECONOMYHigh Quality that Doesn't Cost the EarthProbe with Cooling Tube Electronic Unit with Probe? High Quality? Low Cost? Simple OperationOxygen Analyser Package for Small to Medium Size Boilers? Easy Installation? Factory Calibrated? 24 Month WarrantyTechnical DescriptionThe OXITEC® 5000 ECONOMY oxygen analyser package comprises a probe, interconnecting cable and the microprocessor electronic unit and was developed for use in small to medium size boilers for commercial and industrial applications.All components and materials used have been well proven from ENOTEC's many years experience in large boiler applications, such as in power stations, incinerator plants etc. resulting in long working life and low maintenance.ENOTEC's gold brazing technology ensures a gas-tight sensor which with its large cell surface area contributes to the increased O2 measuring accuracy and fast response from the OXITEC® 5000 ECONOMY oxygen analyser package.The microprocessor electronics is contained in a rugged sheet metal hou-sing for direct mounting in the boiler house. The back lit graphic display (LCD) has clear text with keypad selectable language options, providing easy operation for end users in other countries. Installation time is reduced to a minimum with electrical cable connections simplified by use of quick disconnect plug & socket.BS DIN EN ISO 9001Certificate: FM 52247Measuring PrincipleOXITEC® 5000 ECONOMY oxygen analysers measure the oxygen content, using a heated zirconium oxide measuring cell (B), directly in the flue gas channel (InSitu). The process gas (A) diffuses through a filter element and “flows” over the measuring gas side of the measuring cell. The reference gas (air) with its known and constant O2-concentration contacts the cell from the inside (C). At constant temperature a voltage is generated between the two surfaces of the cell, which is a direct measure for the oxygen concentration in the process gas.Process gas (A)Ion migrationPlumb lineZirconium oxide (B)mV-VoltageHeatingElectrodesThermocoupleReference gas(Air) (C)Dimensions of the electronic equipment and standard probeECONOMY probesSheet steel housingAll dimensions in mmAll dimensions in mmwith Cooling Tube 1400 °Cwith Extended Filter Head 400 °CStandard probe 400 °Cfor High Dust Application 400 °CvH/04-06Flange according to DN 65 PN 6ENOTEC policy is one on continuous product improvement, and therefore,serves the right to change specifications and information as required without prior notice.OXITEC® is registrated trademark of ENOTEC GmbHENOTEC GmbHHöher Birken 6D-51709 MarienheideGermanyTel.: +49 22 64-4578-0Fax: +49 22 64-4578-31E-mail: info@enotec.dewww.enotec.dewww.enotec.comENOTEC Inc.6206 Sandy Ridge Circle NWNorth CantonOHIO 44720 - 6686USATel.: +1 330 498 0202Fax.: +1 330 497 9802E-mail: enotec.inc@enotec.comwww.enotec.comENOTEC UK Ltd.PO BOX 9026DumfriesDG1 3YHUnited KingdomTel.: +44 8703 500 102Fax: +44 8703 500 302E-mail: enotec.uk@enotec.comwww.enotec.comENOTEC ASIA PTE. Ltd.151 Pasir Panjang DistriparkBlock 1#02-19 Pasir Panjang RoadSingapore 118480Tel: +65 6100 2188Fax: +65 6399 2780E-mail: enotec@singnet.com.sgwww.enotec.comHeadquater: