Parker Balston - Model UDA-300 - Air Dryers for Analytical Instruments - Brochure

Products for Ultra Dry Air461-800-343-4048 www.labgasgenerators.comModel 64-02Laboratory Membrane Air Dryers? Low dewpoint instrument air - prevents analytical instrument contamination? Dry air for hazardous areas? No electricity required - low operating costs? No refrigerants or freons - environmentally sound? Explosion proof? No moving parts or motors - silent operationThe Parker Balston® 64-01, 64-02 and 64-10 Membrane Air Dryers will supply oil and particulate free dry compressed air to atmospheric dewpoints as low as -40°F (-40°C), and at flow rates of up to 25 SCFM. Parker Balston Membrane Air Dry-ers are engineered for easy instal-lation, operation, and long term reliability. The dryers incorporate the highest efficiency membrane available, offering low cost opera-tion and minimal maintenance.Parker Balston Membrane Air Dryers are designed to operate continuously, 24 hours per day, 7 days per week. The only main-tenance required is changing the prefilter cartridge once each year. This annual maintenance takes ap-proximately 5 minutes.Water vapor quickly permeates the membrane, and is released harmlessly to atmosphere. Air flows along the membrane fiber as a separate product stream.FiberDry AirAirWater VaporThe dryers are lightweight, com-pact, and can be easily installed on an existing air line. In a vertical or horizontal orientation (depending upon model), a high efficiency co-alescing prefilter is installed directly upstream from the dryer module to protect the membrane from potential contamination caused by pipe scale, liquids, or other sol-ids. Parker Balston Membrane Air Dryers require no electrical connec-tions, making them ideal for remote and point-of-use installations or for installation in hazardous areas.Products for Ultra Dry Air471-800-343-4048 www.labgasgenerators.comLaboratory Membrane Air DryersPrincipal SpecificationsOrdering Information for assistance, call 800-343-4048, 8 to 5 Eastern TimeNotes:1 Dewpoint specified with inlet air at 100°F (38°C) saturated at 100 psig.2 Inlet compressed air dewpoint must not exceed the ambient air temperature.Membrane Air Dryers Model At -40°F Dewpoint At 32°F Dewpoint (-40°C) (0°C) Max. Flow Rate (1) 64-01 28 LPM 71 LPM 64-02 57 LPM 142 LPM 64-10 283 LPM 708 LPMMin/Max Inlet Air Temp. (2) 40°F/140°F (4°C/60°C)Recommended Operating Temp. Range 60°F-100°F (16°C-38°C)Min/Max Inlet Pressure 60 psig/150 psigMaximum Pressure Drop <4 psigWall Mountable YesInlet/Outlet Port Size 64-01 1/4” NPT (female) 64-02 1/4” NPT (female) 64-10 1/2” NPT (female) Electrical Requirements NoneShipping Weight 64-01 9 lbs. (4 kg) 64-02 10 lbs. (5 kg) 64-10 18 lbs. (9 kg)Dimensions 64-01 6”w x 22”h x 5”d (15cm x 57cm x 13cm) 64-02 6”w x 23”h x 5”d (15cm x 112cm x 13cm) 64-10 6”w x 37”h x 5”d (15cm x 93cm x 13cm)Description Model NumberParker Balston Membrane Dryer 64-01, 64-02, 64-10 Annual Maintenance Kit 64-01 MK7601 64-02 MK7601 64-10 MK7610Installation Kit 64-01 IK7572 64-02 IK7572 64-10 IK75880Pressure Regulator All 72-130-V883Preventive Maintenance Plan 64-01 64-01-PM 64-02 64-02-PM 64-10 64-10-PMExtended Support with 24 Month Warranty 64-01 64-01-DN2 64-02 64-02-DN2 64-10 64-10-DN2Products for Ultra Dry Air481-800-343-4048 www.labgasgenerators.comModel UDA-300NAUltra Dry Gas Generator? Supplies ultra-dry, purified compressed air to NMR Spectrometers and other analytical instruments? Ideal gas supply for spindle and automatic sample changer? Completely eliminates costly, inconvenient nitrogen dewars - never pay for or change out another dewar? Compact design frees up valuable laboratory floor space? Completely automatic - plug it in and forget about itThe Parker Balston® Model UDA-300NA Compressed Air Dryer provides ultra-dry, purified com-pressed air to analytical instruments. The model UDA-300 reduces the dewpoint to -100°F (-73°C) without operator attention. Each system is delivered complete, and ready for easy installation. A high efficiency prefiltration system, automatic drains, a 0.01µm final fil-ter, a moisture indicator, and pretest-ed controls are integral to the design of each dryer.To install, simply connect your house compressed air supply (at least 60 psig and 1/4 inch pipe) to the dry-er inlet port, and connect the dryer outlet port to your instruments. Plug the electrical cord into a wall outlet - no electrician required - and the unit is ready for trouble-free operation. Designed specifically for NMR instrumentation, the generator is completely automatic, and virtu-ally maintenance free. It is ideal for injecting, spinning, and lifting opera-tions. It is recommended by major NMR instrument manufacturers and is currently installed in several thou-sand locations.Principal SpecificationsOrdering Information for assistance, call 800-343-4048, 8 to 5 Eastern TimeNotes:1 Outlet dew point will increase at higher inlet compressed air temperatures2 Refer to voltage appendix for electrical and plug configurations outside North America.Model UDA-300NA Compressed Air DryerDew Point -100°F (-73°C)Flow Rate at 60 psig 390 scfh (184 lpm)Flow Rate at 125 psig 720 scfh (340 lpm)Min/Max Inlet Air Pressure 60 psig/125 psigMax Inlet Air Temperature (1) 78°F (25°C)Inlet/Outlet Port Size 1/4” NPT (female)Electrical Requirements (2) 120 VAC/60 Hz, 10 WattsDimensions 41”h x 15”w x 8”d (104cm x 38cm x 20cm)Shipping Weight 50 lbs (23 kg)Description Model NumberCompressed Air Dryer UDA-300NAInlet Pressure Regulator 72-130-V883Annual Maintenance Kit MK7525Annual Preventive Maintenance Plan UDA-300-PMExtended Support with 24 Month Warranty UDA-300-DN2