Performance Liner - Trenchless Cleanout Installation Systems Brochure

LMK TECHNOLOGIES®WWW.PERFORMANCELINER.COMPERFORMANCE LINER®TRENCHLESS CLEANOUTINSTALLATION SYSTEMS VAC-A-TEE®WWW.PERFORMANCELINER.COM • 815.433.1275“WE’RE BREAKING NEW GROUNDWITHOUT BREAKING ANY GROUND.”VAC-A-TEE® allows access to the lateral pipe for cleaning, inspection, and lateral lining through a cleanout.VAC-A-TEE®can also be used to establish a new service connection at the mainline pipe.VAC-A-TEE® is compatible with all pipe typessuch as clay, cast iron, concrete, PVC and even HDPE and is available in diameters from 4 to 24 inches.The lateral pipe is located using a sewer camera and sonde – A vacuum excavated bore hole is made approximately 18”in diameter exposing the buried pipe – All spoils are deposited in the debris tank of the vacuum truck – The exterior ofthe pipe is cleaned by using a pressure washer – A depth measurement is taken and the riser pipe is solvent welded tothe VAC-A-TEE® – Then, the engineered adhesive/sealant is applied thoroughly to theunderside of the saddle – The assembly is lowered in to the bore hole, the saddle is snappedon to the pipe from above the surface and then backfilled – Once cured, the saddle ishydrostatically tested by filling the riser pipe with water verifying a non-leaking connection –The crown of the pipe is then cut open by inserting a diamond core saw down through the waterfilled riser pipe – The coupon is removed and the water flushes downstream – The new cleanoutis complete allowing access to the upstream or downstream side of the lateral pipe – Now youhave a new outside cleanout.ADVANTAGESHOW IT WORKS…HOMEOWNER FRIENDLYMinimal disruption and restorationENVIRONMENTALLY FRIENDLYSaves trees and landscapingUTILITY FRIENDLYVacuum excavation eliminates the potential hazardsof digging up buried utility lines such as water and gasINSTALLER FRIENDLYNo large trench boxes, no shoring, and no man-entrymeans a safe workplace LINED MAIN TAP™WWW.PERFORMANCELINER.COM • 815.433.1275How to effectively connect and seal a lateral sewer pipe to a main sewer, which has been lined with CIPP or folded plastic liners.The LMT™ (Lined Main Tap) makes connecting directly to the mainline lining as easy as a SNAP.The lateral pipe is cut, and the old main pipe is brokenaway exposing the mainline liner. By connecting directlyto the main liner, a hermetic seal is made to the lateralpipe.The lateral opening in the main liner is prepared byremoving any high spots making a suitable surface forthe attachment of the LMT™ saddle.Next, the underwater curing 2-part hybrid adhesive isapplied to the saddle by use of a twin cartridge caulkinggun. This proprietary adhesive bonds the LMT™saddle to the new main liner and provides a flexible seal.The LMT™ Saddle is snapped onto the Lined MainPipe providing a new Lateral Tap. The saddle coversmore than 180-degrees of the main liner forming astructural new connection.The lateral pipe is connected to the new pipe extendingfrom the LMT™ using Non-Shear Couplings. The endresult is a structural new Lateral Tap that does notprotrude into the main pipe, is compatible with all pipetypes and connects the lateral pipe directly to the mainliner ensuring a long-term effective Main/Lateral Seal. WWW.PERFORMANCELINER.COMLMK TECHNOLOGIES®1779 Chessie Lane • Ottawa, IL 61350USA 815.433.1275 • FAX 815.433.0107 VacATee_Brochure1 VacATee_Brochure2 VacATee_Brochure3 VacATee_Brochure4