Kidde Canada
  1. Companies & Suppliers
  2. Kidde Canada
  3. Downloads
  4. Photoelectric Smoke Alarm Brochure

Photoelectric Smoke Alarm Brochure

Part Number PE9KCA Model p9050CA10-Year Limited WarrantyDescriptionThe Kidde p9050CA is a 9 V battery operated, single station smoke alarm. The p9050CA offers a Hush® button that temporarily silences nuisance alarms.This smoke alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible fire particles (associated with slow smouldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. Features and Benefits • Multi-function One Button Design includes:• Hush® Feature – Temporarily silences nuisance alarms for approximately 8 minutes (smoke must be present before Hush® is activated).• Test Feature – Simultaneously tests the unit’s electronic circuitry, horn, and battery function.• Photoelectric Technology – may detect visible particles (associated with smoldering fires) sooner than ionization alarms.• 9 V Battery Operated – No wiring required. Provides continuous protection even during power outages.• Tamper Resist Feature – Tamper resist locking pin deters from tampering or theft. Ionization Technology9 V Battery OperatedTest / Hush® Button9 V Battery Operated Photoelectric Smoke AlarmRECOMMENDED BYRECOMMANDÉ PARThe smoke alarm shall be Kidde model p9050CA or approved equal. It shall be powered by a 9 V battery. The temperature operation range shall be between 4.4°C and 37.8°C (40° and 100°F) and the humidity operating range shall be 10%–95% relative humidity.The unit shall incorporate an photoelectric sensor with nominal sensitivity of 0.72 - 3.27% / ft. The alarm can be installed on the surface of any wall or ceiling following the UL / NFPA / Manufacturer’s recommended placement guidelines. The unit shall provide optional tamper resistance that deters removal of the unit from the wall or ceiling.The alarm shall include a test button that will electronically simulate the presence of smoke and cause the unit to go into alarm. This sequence tests the unit’s electronics, battery and horn to ensure proper operation.The unit shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. The unit shall include a Hush® feature that silences the unit for approximately 8 minutes if a nuisance condition occurs. The unit shall also include a low battery warning utilizing a brief alarm chirp every 30-40 seconds for a minimum of seven (7) days.The unit shall incorporate a red LED indicator (located under the Test / Hush® button) that will flash every 40 seconds to indicate that the smoke alarm is receiving power. When products of combustion are sensed, the unit sounds the alarm, and the red LED will flash every 2 seconds, until the air is cleared. The unit shall at a minimum meet the requirements of CAN / ULC-S531. It also shall include a 10-year manufacturer’s limited warranty.9 V Battery Operated Photoelectric Smoke Alarm Part Number PE9KCAModel p9050CAArchitectural and Engineering SpecificationsDistributed by:Ordering InformationUPC: 0-47871-40378-3Kidde Canada Inc. P.O. Box 40, Apsley, ON K0L 1A0 1-800-880-6788 www.kiddecanada.com rev. 09-2014Technical SpecificationsPower Source: 9 V batterySensor: PhotoelectricAudio Alarm: 85 dB at 10 ftTemperature Range: 4.4°C (40°F) to 37.8°C (100°F)Humidity Range: 10%-95% relative humidity, non-condensingUnit Size: 12.5 cm in diameter x 3.8 cm depthUnit Weight: 0.14 kgInterconnects: NoWarranty: 10-year limitedPart Number I2 of 5 Pack QuantityCase Dimensions (w x d x h centimeters) Case WeightCase/ SkidPE9KCA 400-47871-40378-1 8 units 45 cm x 21 cm x 30.5 cm 2.66 kg 3612.5 cm 3.8 cm
Most popular related searches