Logo Environmental XPRT
Companies
Products
Services
Software
Training
Applications
Sign in
List your business
Precision Hermetic Technology (PHT)
About
Downloads
  2. Companies & Suppliers
  3. Precision Hermetic Technology (PHT)
  4. Downloads
  5. PHT - MIL-STD-38999 - Circular ...

PHT - MIL-STD-38999 - Circular Connectors - Brochure

INCH-POUNDMIL-STD-1560B 20 July 2007 SUPERSEDING MIL-STD-1560A 1 December 1975 DEPARTMENT OF DEFENSE INTERFACE STANDARD INSERT ARRANGEMENTS FOR MIL-DTL-38999, MIL-DTL-27599 AND MIL-C-29600 SERIES A ELECTRICAL CIRCULAR CONNECTORS AMSC N/A FSC 5935 MIL-STD-1560B ii FORWARD 1. This standard is approved for use by all Departments and Agencies of the Department of Defense. 2. Comments, suggestions, or questions on this document should be addressed to Commander, Defense Supply Center Columbus, Attn: VAI, P.O. Box 3990, Columbus, Ohio, 43218-3990 or emailed to CircularConnector@dla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at http://assist.daps.dla.mil. MIL-STD-1560B iii CONTENTS PARAGRAPH PAGE FORWARD .....................................................................................................................................ii 1. SCOPE .....................................................................................................................................1 1.1 Scope .....................................................................................................................................1 2. APPLICABLE DOCUMENTS...............................................................................................................1 2.1 General ...................................................................................................................................1 2.2 Government documents .........................................................................................................1 2.2.1 Specifications, standards, and handbooks.............................................................................1 2.2.2 Other Government documents, drawings and publications ...................................................1 2.3 Order of precedence...............................................................................................................2 3. DEFINITIONS .....................................................................................................................................2 3.1 Definitions ...............................................................................................................................2 4. GENERAL REQUIREMENTS..............................................................................................................2 4.1 Recycled, recovered, or environmentally preferable materials ..............................................2 5. DETAILED REQUIREMENTS .............................................................................................................2 5.1 Dimensions .............................................................................................................................2 5.2 Marking ...................................................................................................................................3 5.3 Drawing notes .........................................................................................................................3 6. NOTES 6.1 Intended use ..........................................................................................................................4 6.2 Cross-reference. .....................................................................................................................4 6.3 Subject term (key word) listing................................................................................................7 FIGURES 1. Insert arrangement, electrical connector, shell size 9 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) ..................................................8 2. Insert arrangement, electrical connector, shell size 11 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) ..................................................13 3. Insert arrangement, electrical connector, shell size 13 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) ..................................................20 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) ..................................................25 5. Insert Arrangement, Electrical Connector, Shell Size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) ..................................................34 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) ..................................................45 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) ..................................................58 8. Insert arrangement, electrical connector, shell size 23 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) ..................................................71 MIL-STD-1560B iv 9. Insert arrangement, electrical connector, shell size 25 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) ..................................................90 10. Insert arrangement, electrical connector, shell size 8 (Series II of MIL-DTL-38999, and Series II of MIL-DTL-27599) ...................................................................................................121 11. Insert arrangement, electrical connector, shell size 10 (Series II of MIL-DTL-38999, and Series II of MIL-DTL-27599) ...................................................................................................126 12. Insert arrangement, electrical connector, shell size 12 (Series II of MIL-DTL-38999, and Series II of MIL-DTL-27599) ...................................................................................................131 13. Insert arrangement, electrical connector, shell size 14 (Series II of MIL-DTL-38999, and Series II of MIL-DTL-27599) ...................................................................................................137 14. Insert arrangement, electrical connector, shell size 16 (Series II of MIL-DTL-38999, and Series II of MIL-DTL-27599) ...................................................................................................143 15. Insert arrangement, electrical connector, shell size 18 (Series II of MIL-DTL-38999, and Series II of MIL-DTL-27599) ...................................................................................................153 16. Insert arrangement, electrical connector, shell size 20 (Series II of MIL-DTL-38999, and Series II of MIL-DTL-27599) ...................................................................................................171 17. Insert arrangement, electrical connector, shell size 22 (Series II of MIL-DTL-38999, and Series II of MIL-DTL-27599) ...................................................................................................184 18. Insert arrangement, electrical connector, shell size 24 (Series II of MIL-DTL-38999, and Series II of MIL-DTL-27599) ...................................................................................................204 CONCLUDING MATERIAL.......................................................................................................................220 MIL-STD-1560B 1 1. SCOPE 1.1 Scope. This standard covers insert arrangements for use with MIL-DTL-38999 series I, II, III, IV; MIL-DTL-27599 series I and II; and MIL-C-29600 series A circular connectors. 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this section are specified in sections 3, 4, and 5 of this standard. This section does not include documents cited in other sections of this standard or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, and 5 of this standard, whether or not they are listed. 2.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation contract. DEPARTMENT OF DEFENSE SPECIFICATIONS MIL-DTL-38999 - Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, General Specification For. MIL-C-29600 - Connectors, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts, Associated Hardware General Specification For. MIL-DTL-27599 - Connector, Electrical, Miniature, Quick Disconnect (For Weapon Systems) Established Reliability. (Copies of these documents are available online at http://assist.daps.dla.mil/quicksearch/ or http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2.2 Other Government documents, drawings and publications. The following other Government documents, drawings and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DRAWINGS 02003 - Contact Electrical Connector Concentric Twinax, Socket Shielded, Size 12 (For MIL-DTL-38999 Series I, III, and IV connectors) 02004 - Contact Electrical Connector Concentric Twinax, Pin, Shielded, Size 12 (For MIL-DTL-38999 Series I, III, and IV connectors) (Copies of DSCC drawings are available for download at internet web address http://dscc.dla.mil). MIL-STD-1560B 2 2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. DEFINITIONS 3.1 Definitions. The terms used in this standard are generally accepted by the electrical and electronics industries and commonly used in electrical connector engineering practice. 4. GENERAL REQUIREMENTS 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable materials should be used to the maximum extent possible, provided that the materials meets or exceeds the operational and maintenance requirements, and promotes economical advantageous life cycle costs. 5. DETAILED REQUIREMENTS 5.1 Dimensions. Dimensions shall be in accordance with the applicable section of this standard and the following dimensional data: a. Ð indicates L of insert arrangement. C b. All dimensions (TP) are in inches. Dimensions and markings: Front face of pin insert shown (socket insert opposite). c. Number 12 contacts - MIL-DTL-27599 - pin contacts .094 ± .001 diameter, socket contacts entry hole (contact sleeve) .099 minimum diameter, number of places as applicable. MIL-DTL-38999 and MIL-C-29600 series A – pin contacts .094 ± .001 diameter, socket insert entry hole .103 minimum diameter, number of places as applicable. d. Number 16 contacts - MIL-DTL-27599 – pin contacts .0625 ± .0010 diameter, socket contacts entry hole (contact sleeve) .067 minimum diameter, number of places as applicable. MIL-DTL-38999 and MIL-C-29600 series A – pin contacts .0625 ± .0010 diameter, socket insert entry hole .071 minimum diameter, number of places as applicable. e. Number 20 contacts - MIL- DTL-27599 - pin contacts .040 ± .001 diameter, socket contacts entry hole (contact sleeve) .045 minimum diameter, number of places as applicable. MIL-DTL-38999 and MIL-C-29600 series A – pin contacts .040 ± .001 diameter, socket insert entry hole .049 minimum diameter, number of places as applicable. f. Number 22 and 22M - MIL-DTL-27599 – pin contacts .0300 ± .0005 diameter, socket contacts entry hole (contact sleeve) .036 minimum diameter, number of places as applicable. MIL-STD-1560B 3 g. Number 22D contacts - MIL-DTL-38999 and MIL-C-29600 series A - pin contacts .0300 ± .0.0005 diameter, socket insert entry hole .035 minimum diameter, number of places as applicable. h. Number 8 contacts - MIL-DTL-38999 and MIL-C-29600 series A - pin contacts .218 ± .001 diameter, socket insert entry hole .227 minimum diameter, number of places as applicable. i. Gauge features for MIL-DTL-38999 series I, II, and III, MIL-C-29600 series A and MIL-DTL-27599 series I and II receptacle connectors shall be .002 smaller than H at MMC, and .006 smaller than GG at MMC. ? H- .002 ? GG- .006 ? See notes j. Gauge features for MIL-DTL-38999 series I, II, and III; MIL-C-29600 series A and MIL-DTL-27599 series I and II plug connectors shall be .002 larger than W at MMC and .006 larger than GG at MMC. ? W+ .002 ? GG+ .006 ? See notes NOTES: a. For fixed contact designs such as MIL-DTL-27599 and hermetic connectors of MIL-DTL-38999; this requirement pertains to the pin contacts and the socket entry holes (contact sleeve). .004 DIA ? b. For removable contacts MIL-DTL-38999 and MIL-C-29600 series A connectors; this requirement pertains to the closed entry hole of the socket contacts. .015 DIA ? c. For removable contacts MIL-DTL-38999 and MIL-C-29600 series A connectors, this requirement pertains to the tip of the pin contact. .024 DIA ? d. DATUMS H, GG, and W are located on connector intermateability dimension figures for key/keyway polarization in MIL-DTL-38999. 5.2 Marking. Marking shall be in accordance with MIL-DTL-38999, MIL-C-29600 series A, MIL-DTL-27599, and as shown in the applicable section of this standard. Sawtooth lines may be used in place of straight lines. 5.3 Drawing notes. The following information is applicable to all figure of this standard. a. Dimensions are in inches. b. Metric equivalents are given for information only. c. Insert arrangements using multi-axial (i.e coax, twinax, shielded) contacts shall not be used in firewall connector applications. MIL-STD-1560B 4 6. NOTES (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.) 6.1 Intended use. This standard covers insert arrangements for use with MIL-DTL-38999 series I, II, III, IV; MIL-DTL-27599 series I and II; and MIL-C-29600 series A circular connectors. Information pertaining to Shell size, arrangement number, number of contacts, size of contacts, service rating, contact location, and superseding information is contained in this document. 6.2 Cross-reference. See table I for cross-reference of previous sections and current figures. See table II for reference links to insert arrangement numbers. TABLE I. Cross reference of figures to sections. Title Current figure Previous section Document Series MIL-DTL-38999 I,III, IV MIL-DTL-27599 I Insert arrangement, electrical connector, shell size 9 1 101 MIL-C-29600 A MIL-DTL-38999 I,III, IV MIL-DTL-27599 I Insert arrangement, electrical connector, shell size 11 2 102 MIL-C-29600 A MIL-DTL-38999 I,III, IV MIL-DTL-27599 I Insert arrangement, electrical connector, shell size 13 3 103 MIL-C-29600 A MIL-DTL-38999 I,III, IV MIL-DTL-27599 I Insert arrangement, electrical connector, shell size 15 4 104 MIL-C-29600 A MIL-DTL-38999 I,III, IV MIL-DTL-27599 I Insert arrangement, electrical connector, shell size 17 5 105 MIL-C-29600 A MIL-DTL-38999 I,III, IV MIL-DTL-27599 I Insert arrangement, electrical connector, shell size 19 6 106 MIL-C-29600 A MIL-DTL-38999 I,III, IV MIL-DTL-27599 I Insert arrangement, electrical connector, shell size 21 7 107 MIL-C-29600 A MIL-DTL-38999 I,III, IV MIL-DTL-27599 I Insert arrangement, electrical connector, shell size 23 8 108 MIL-C-29600 A MIL-DTL-38999 I,III, IV MIL-DTL-27599 I Insert arrangement, electrical connector, shell size 25 9 109 MIL-C-29600 A MIL-DTL-38999 II Insert arrangement, electrical connector, shell size 8 10 201 MIL-DTL-27599 II MIL-DTL-38999 II Insert arrangement, electrical connector, shell size 10 11 202 MIL-DTL-27599 II MIL-DTL-38999 II Insert arrangement, electrical connector, shell size 12 12 203 MIL-DTL-27599 II MIL-STD-1560B 5 TABLE I. Cross reference of figures to sections-Continued. Title Current figure Previous section Document Series MIL-DTL-38999 II Insert arrangement, electrical connector, shell size 14 13 204 MIL-DTL-27599 II MIL-DTL-38999 II Insert arrangement, electrical connector, shell size 16 14 205 MIL-DTL-27599 II MIL-DTL-38999 II Insert arrangement, electrical connector, shell size 18 15 206 MIL-DTL-27599 II MIL-DTL-38999 II Insert arrangement, electrical connector, shell size 20 16 207 MIL-DTL-27599 II MIL-DTL-38999 II Insert arrangement, electrical connector, shell size 22 17 208 MIL-DTL-27599 II MIL-DTL-38999 II Insert arrangement, electrical connector, shell size 24 18 209 MIL-DTL-27599 II TABLE II. Cross reference to insert arrangements. Figure Insert arrangement Page Figure Insert arrangement Page 1 9-3 8 9 25-11 110 1 9-98 9 9 25-20 111 1 9-44 10 9 25-7 113 1 9-6 11 9 25-8 116 1 9-35 12 9 25-90 117 2 11-4 13 9 25-37 119 2 11-5 14 10 8-3 121 2 11-98 15 10 8-6 122 2 11-99 16 10 8-44 123 2 11-13 17 10 8-98 124 2 11-35 18 10 8-35 125 2 11-2 19 11 10-5 126 3 13-4 20 11 10-13 127 3 13-8 21 11 10-98 128 3 13-98 22 11 10-99 129 3 13-22 23 11 10-35 130 3 13-35 24 12 12-22 131 4 15-5 25 12 12-4 132 4 15-15 26 12 12-8 133 4 15-18 27 12 12-98 134 4 15-19 28 12 12-35 135 MIL-STD-1560B 6 TABLE II. Cross reference to insert arrangements-Continued. Figure Insert arrangement Page Figure Insert arrangement Page 4 15-37 29 12 12-3 136 4 15-97 31 13 14-5 137 4 15-35 32 13 14-15 138 5 17-6 34 13 14-18 139 5 17-8 35 13 14-97 140 5 17-11 36 13 14-35 141 5 17-99 37 13 14-37 142 5 17-26 38 14 16-8 143 5 17-2 39 14 16-26 144 5 17-35 41 14 16-99 145 5 17-55 43 14 16-55 146 6 19-11 45 14 16-42 148 6 19-28 46 14 16-35 150 6 19-30 47 14 16-6/ 7 152 6 19-32 48 15 18-11 153 6 19-67 49 15 18-28 154 6 19-35 51 15 18-30 156 6 19-66 53 15 18-32 158 6 19-45 55 15 18-67 162 6 19-18 57 15 18-35 164 7 21-11 58 15 18-45 166 7 21-16 59 15 18-66 168 7 21-24 60 15 18-96 170 7 21-25 61 16 20-1 171 7 21-27 62 16 20-2 173 7 21-41 63 16 20-16 175 7 21-39 64 16 20-24 176 7 21-1 66 16 20-25 177 7 21-35 68 16 20-27 178 7 21-75 70 16 20-39 179 8 23-1 71 16 20-41 181 8 23-35 74 16 20-35 182 8 23-2 77 17 22-1 184 8 23-21 79 17 22-2 187 8 23-32 80 17 22-21 189 8 23-34 81 17 22-32 190 8 23-36 82 17 22-34 191 MIL-STD-1560B 7 TABLE II. Cross reference to insert arrangements-Continued. Figure Insert arrangement Page Figure Insert arrangement Page 8 23-53 84 17 22-36 193 8 23-97 86 17 22-53 195 8 23-99 87 17 22-55 197 8 23-55 88 17 22-97 199 9 25-1 90 17 22-99 200 9 25-35 93 17 22-35 201 9 25-2 96 18 24-1 204 9 25-29 99 18 24-2 207 9 25-61 100 18 24-61 210 9 25-4 102 18 24-4 212 9 25-43 104 18 24-24 214 9 25-46 106 18 24-29 215 9 25-19 108 18 24-35 216 9 25-24 109 18 24-19 219 6.3 Subject term (key word) listing. Shell size Contacts Socket Plug 6.4 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. MIL-STD-1560B 8 Contacts (Insert arrangement 9-3) Contact location Contact position identification (ID) X-axis (mm) Y-axis (mm) A +.056 (1.42) +.018 (0.46) B +.000 (0.00) -.079 (2.01) C -.056 (1.42) +.018 (0.46) (Applicable to MIL-DTL-27599 only) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 9 -3 3 20 M All MS20049-3 FIGURE 1. Insert arrangement, electrical connector, shell size 9 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600). MIL-STD-1560B 9 Contacts (Insert arrangement 9-98) Contact location Contact position ID X-axis (mm) Y-axis (mm) A +.065 (1.65) +.038 (0.97) B +.000 (0.00) -.075 (1.91) C -.065 (1.65) +.038 (0.97) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 9 -98 3 20 I All MS20049-98 FIGURE 1. Insert arrangement, electrical connector, shell size 9 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 10 Contacts (Insert arrangement 9-44) Contact location Contact position ID X-axis (mm) Y-axis (mm) 1 +.000 (0.00) +.081 (2.06) 2 +.080 (2.03) +.021 (0.53) 3 +.000 (0.00) -.050 (1.27) 4 -.080 (2.03) +.021 (0.53) (Inactive for new design for MIL-DTL-38999 and MIL-C-29600, series A) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 9 -44 4 22 M All MS20049-44 FIGURE 1. Insert arrangement, electrical connector, shell size 9 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 11 Contacts (Insert arrangement 9-6) Contact location Contact position ID X-axis (mm) Y-axis (mm) 1 +.045 (1.14) +.078 (1.98) 2 +.078 (1.98) -.045 (1.14) 3 +.000 (0.00) -.090 (2.29) 4 -.078 (1.98) -.045 (1.14) 5 -.045 (1.14) +.078 (1.98) 6 +.000 (0.00) +.000 (0.00) (Inactive for new design for MIL-DTL-38999 and MIL-C-29600, series A) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 9 -6 6 22M M All MS20049-6 FIGURE 1. Insert arrangement, electrical connector, shell size 9 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 12 Contacts (Insert arrangement 9-35) Contact location Contact position ID X-axis (mm) Y-axis (mm) 1 +.045 (1.14) +.078 (1.98) 2 +.078 (1.98) -.045 (1.14) 3 +.000 (0.00) -.090 (2.29) 4 -.078 (1.98) -.045 (1.14) 5 -.045 (1.14) +.078 (1.98) 6 +.000 (0.00) +.000 (0.00) (Applicable to MIL-DTL-38999 and MIL-C-29600, series A) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 9 -35 6 22D M All MS27525-35 FIGURE 1. Insert arrangement, electrical connector, shell size 9 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 13 Contacts (Insert arrangement 11-4) Contact location Contact position ID X-axis (mm) Y-axis (mm) A +.065 (1.65) +.065 (1.65) B +.065 (1.65) -.065 (1.65) C -.065 (1.65) -.065 (1.65) D -.065 (1.65) +.065 (1.65) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 11 -4 4 20 I All MS20050-4 FIGURE 2. Insert arrangement, electrical connector, shell size 11 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600). MIL-STD-1560B 14 Contacts (Insert arrangement 11-5) Contact location Contact position ID X-axis (mm) Y-axis (mm) A +.065 (1.65) +.056 (1.42) B +.113 (2.87) -.065 (1.65) C +.000 (0.00) -.130 (3.30) D -.113 (2.87) -.065 (1.65) E -.065 (1.65) +.056 (1.42) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 11 -5 5 20 I All MS20050-5 FIGURE 2. Insert arrangement, electrical connector, shell size 11 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 15 Contacts (Insert arrangement 11-98) Contact location Contact position ID X-axis (mm) Y-axis (mm) A +.000 (0.00) +.130 (3.30) B +.130 (3.30) +.000 (0.00) C +.065 (1.65) -.113 (2.87) D -.065 (1.65) -.113 (2.87) E -.130 (3.30) +.000 (0.00) F +.000 (0.00) +.000 (0.00) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 11 -98 6 20 I All MS20050-98 FIGURE 2. Insert arrangement, electrical connector, shell size 11 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 16 Contacts (Insert arrangement 11-99) Location Contact position ID X-axis (mm) Y-axis (mm) A +.065 (1.65) +.113 (2.87) B +.130 (3.30) +.000 (0.00) C +.065 (1.65) -.113 (2.87) D -.065 (1.65) -.113 (2.87) E -.130 (3.30) +.000 (0.00) F -.065 (1.65) +.113 (2.87) G +.000 (0.00) +.000 (0.00) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 11 -99 7 20 I All MS20050-99 FIGURE 2. Insert arrangement, electrical connector, shell size 11 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. . MIL-STD-1560B 17 Contacts (Insert arrangement 11-13) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 +.000 (0.00) +.146 (3.71) 8 -.138 (3.51) -.045 (1.14) 2 +.085 (2.16) +.118 (3.00) 9 -.138 (3.51) +.045 (1.14) 3 +.138 (3.51) +.045 (1.14) 10 -.085 (2.16) +.118 (3.00) 4 +.138 (3.51) -.045 (1.14) 11 +.000 (0.00) +.056 (1.42) 5 +.085 (2.16) -.118 (3.00) 12 +.049 (1.24) -.035 (0.89) 6 +.000 (0.00) -.146 (3.71) 13 -.049 (1.24) -.035 (0.89) 7 -.085 (2.16) -.118 (3.00) (Inactive for new design for MIL-DTL-38999) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 11 -13 13 22M M All MS20050-13 FIGURE 2. Insert arrangement, electrical connector, shell size 11 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 18 Contacts (Insert arrangement 11-35) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 +.000 (0.00) +.146 (3.71) 8 -.138 (3.51) -.045 (1.14) 2 +.085 (2.16) +.118 (3.00) 9 -.138 (3.51) +.045 (1.14) 3 +.138 (3.51) +.045 (1.14) 10 -.085 (2.16) +.118 (3.00) 4 +.138 (3.51) -.045 (1.14) 11 +.000 (0.00) +.056 (1.42) 5 +.085 (2.16) -.118 (3.00) 12 +.049 (1.24) -.035 (0.89) 6 +.000 (0.00) -.146 (3.71) 13 -.049 (1.24) -.035 (0.89) 7 -.085 (2.16) -.118 (3.00) (Applicable to MIL-DTL-38999 only) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 11 -35 13 22D M All MS27526-35 FIGURE 2. Insert arrangement, electrical connector, shell size 11 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 19 Contacts (Insert arrangement 11-2) Contact location Contact position ID X-axis (mm) Y-axis (mm) A +.095 (2.41) +.000 (.00) B -.095 (2.41) +.000 (.00) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location 11 -2 2 16 I All FIGURE 2. Insert arrangement, electrical connector, shell size 11 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 20 Contacts (Insert arrangement 13-4) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 13 -4 4 16 I All MS20051-4 FIGURE 3. Insert arrangement, electrical connector, shell size 13 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600). Location Contact position ID X-axis (mm) Y-axis (mm) A +.000 (0.00) +.150 (3.81) B +.146 (3.71) +.035 (0.89) C +.000 (0.00) -.083 (2.11) D -.146 (3.71) +.035 (0.89) MIL-STD-1560B 21 Contacts (Insert arrangement 13-8) Contact location Contact position X-axis (mm) Y-axis ID (mm) A +.065 (1.65) +.157 (3.99) B +.170 (4.32) +.000 (0.00) C +.120 (3.05) -.120 (3.05) D +.000 (0.00) -.170 (4.32) E -.120 (3.05) -.120 (3.05) F -.170 (4.32) +.000 (0.00) G -.065 (1.65) +.157 (3.99) H +.000 (0.00) +.044 (1.12) Shell Arrangement no. Number of contacts Size contacts Service rating Contact size location Supersedes 13 -8 8 20 I All MS20051-8 FIGURE 3. Insert arrangement, electrical connector, shell size 13 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 22 Contacts (Insert arrangement 13-98) Location Contact position ID X-axis Y-axis (mm) (mm) A +.000 (0.00) +.195 (4.95) B +.125 (3.18) +.150 (3.81) C +.193 (4.90) +.030 (0.76) D +.164 (4.17) -.105 (2.67) E +.000 (0.00) -.135 (3.43) F -.164 (4.17) -.105 (2.67) G -.193 (4.90) +.030 (0.76) H -.125 (3.18) +.150 (3.81) J +.065 (1.65) -.015 (0.38) Shell size Arrangement no. Number of contacts Size contacts Service rating K -.065 (1.65) -.015 (0.38) Contact location Supersedes 13 -98 10 20 I All MS20051-98 FIGURE 3. Insert arrangement, electrical connector, shell size 13 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 23 Contacts (Insert arrangement 13-22) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 +.045 (1.14) +.197 (5.00) 12 -.182 (4.62) +.088 (2.24) 2 +.126 (3.20) +.158 (4.01) 13 -.126 (3.20) +.158 (4.01) 3 +.182 (4.62) +.088 (2.24) 14 -.045 (1.14) +.197 (5.00) 4 +.203 (5.16) +.000 (0.00) 15 +.045 (1.14) +.107 (2.72) 5 +.182 (4.62) -.088 (2.24) 16 +.117 (2.97) +.026 (0.66) 6 +.126 (3.20) -.158 (4.01) 17 +.093 (2.36) -.075 (1.91) 7 +.045 (1.14) -.197 (5.00) 18 +.000 (0.00) -.120 (3.05) 8 -.045 (1.14) -.197 (5.00) 19 -.093 (2.36) -.075 (1.91) 9 -.126 (3.20) -.158 (4.01) 20 -.117 (2.97) +.026 (0.66) 10 -.182 (4.62) -.088 (2.24) 21 -.045 (1.14) +.107 (2.72) 11 -.203 (5.16) +.000 (0.00) 22 +.000 (0.00) -.030 (0.76) (Inactive for new design for MIL-DTL-38999) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 13 -22 22 22M M All MS20051-22 FIGURE 3. Insert arrangement, electrical connector, shell size 13 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 24 Contacts (Insert arrangement 13-35) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis Y-axis (mm) (mm) 1 +.045 (1.14) +.197 (5.00) 12 -.182 (4.62) +.088 (2.24) 2 +.126 (3.20) +.158 (4.01) 13 -.126 (3.20) +.158 (4.01) 3 +.182 (4.62) +.088 (2.24) 14 -.045 (1.14) +.197 (5.00) 4 +.203 (5.16) +.000 (0.00) 15 +.045 (1.14) +.107 (2.72) 5 +.182 (4.62) -.088 (2.24) 16 +.117 (2.97) +.026 (0.66) 6 +.126 (3.20) -.158 (4.01) 17 +.093 (2.36) -.075 (1.91) 7 +.045 (1.14) -.197 (5.00) 18 +.000 (.00) -.120 (3.05) 8 -.045 (1.14) -.197 (5.00) 19 -.093 (2.36) -.075 (1.91) 9 -.126 (3.20) -.158 (4.01) 20 -.117 (2.97) +.026 (0.66) 10 -.182 (4.62) -.088 (2.24) 21 -.045 (1.14) +.107 (2.72) 11 -.203 (5.16) +.000 (0.00) 22 +.000 (.00) -.030 (0.76) (Applicable to MIL-DTL-38999 only) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 13 -35 22 22D M All MS27527-35 FIGURE 3. Insert arrangement, electrical connector, shell size 13 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 25 Contacts (Insert arrangement 15-5) Location Contact position ID X-axis (mm) Y-axis (mm) A +.000 (0.00) +.100 (2.54) B +.174 (4.42) +.024 (0.61) C +.094 (2.39) -.148 (3.76) D -.094 (2.39) -.148 (3.76) E -.174 (4.42) +.024 (0.61) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 15 -5 5 16 II All MS20052-5 FIGURE 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600). MIL-STD-1560B 26 Contacts (Insert arrangement 15-15) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) A +.100 (2.54) +.225 (5.72) J -.244 (6.20) +.014 (0.36)B +.202 (5.13) +.140 (3.56) K -.202 (5.13) +.140 (3.56)C +.244 (6.20) +.014 (0.36) L -.100 (2.54) +.225 (5.72)D +.218 (5.54) -.113 (2.87) M +.000 (.00) +.140 (3.56)E +.126 (3.20) -.209 (5.31) N +.110 (2.79) +.040 (1.02)F +.000 (.00) -.245 (6.22) P +.000 (.00) -.077 (1.96)G -.126 (3.20) Shell size Arrangement no. Number of contacts Size -.209 (5.31) R -.110 (2.79) +.040 (1.02)H -.218 (5.54) -.113 (2.87) contacts Service rating Contact location Supersedes 1 16 P 15 -15 14 20 I MS20052-15 All other FIGURE 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 27 Contacts (Insert arrangement 15-18) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) A +.065 (1.65) +.252 (6.40) K -.195 (4.95) +.113 (2.87) B +.195 (4.95) +.113 (2.87) L -.065 (1.65) +.252 (6.40) C +.260 (6.60) +.000 (0.00) M -.065 (1.65) +.113 (2.87) D +.195 (4.95) -.113 (2.87) N +.065 (1.65) +.113 (2.87) E +.130 (3.30) -.225 (5.72) P +.130 (3.30) +.000 (0.00) F +.000 (0.00) -.225 (5.72) R +.065 (1.65) -.113 (2.87) G -.130 (3.30) -.225 (5.72) S -.065 (1.65) -.113 (2.87) H -.195 (4.95) -.113 (2.87) T -.130 (3.30) +.000 (0.00) Shell size Arrangement no. Number of contacts J -.260 (6.60) +.000 (0.00) U +.000 (0.00) +.000 (0.00) Size contacts Service rating Contact location Supersedes 15 -18 18 20 I All MS20052-18 FIGURE 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 28 Contacts (Insert arrangement 15-19) Location Location Contact position ID X-axis Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) (mm) A +.000 (0.00) +.225 (5.72) L -.195 (4.95) +.113 (2.87) B +.130 (3.30) +.225 (5.72) M -.130 (3.30) +.225 (5.72) C +.195 (4.95) +.113 (2.87) N -.065 (1.65) +.113 (2.87) D +.260 (6.60) +.000 (0.00) P +.065 (1.65) +.113 (2.87) E +.195 (4.95) -.113 (2.87) R +.130 (3.30) +.000 (0.00) F +.130 (3.30) -.225 (5.72) S +.065 (1.65) -.113 (2.87) G +.000 (0.00) -.225 (5.72) T -.065 (1.65) -.113 (2.87) H -.130 (3.30) -.225 (5.72) U -.130 (3.30) +.000 (0.00) J -.195 (4.95) -.113 (2.87) V +.000 (0.00) +.000 (0.00) Shell size Arrangement no. K -.260 (6.60) +.000 (0.00) Number of contacts Size contacts Service rating Contact location Supersedes 15 -19 19 20 I All MS20052-19 FIGURE 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 29 Contacts (Insert arrangement 15-37) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 +.045 (1.14) +.262 (6.65) 20 +.123 (3.12) +.119 (3.02) 2 +.123 (3.12) +.217 (5.51) 21 +.170 (4.32) +.040 (1.02) 3 +.211 (5.36) +.160 (4.06) 22 +.170 (4.32) -.050 (1.27) 4 +.254 (6.45) +.080 (2.03) 23 +.123 (3.12) -.127 (3.23) 5 +.266 (6.76) -.010 (0.25) 24 +.045 (1.14) -.172 (4.37) 6 +.247 (6.27) -.098 (2.49) 25 -.045 (1.14) -.172 (4.37) 7 +.200 (5.08) -.175 (4.45) 26 -.123 (3.12) -.127 (3.23) 8 +.130 (3.30) -.232 (5.89) 27 -.170 (4.32) -.050 (1.27) 9 +.045 (1.14) -.262 (6.65) 28 -.170 (4.32) +.040 (1.02) 10 -.045 (1.14) -.262 (6.65) 29 -.123 (3.12) +.119 (3.02) 11 -.130 (3.30) -.232 (5.89) 30 -.045 (1.14) +.172 (4.37) 12 -.200 (5.08) -.175 (4.45) 31 +.045 (1.14) +.074 (1.88) 13 -.247 (6.27) -.098 (2.49) 32 +.090 (2.29) -.004 (0.10) 14 -.266 (6.76) -.010 (0.25) 33 +.045 (1.14) -.082 (2.08) 15 -.254 (6.45) +.080 (2.03) 34 -.045 (1.14) -.082 (2.08) FIGURE 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 30 Contacts (Insert arrangement 15-37) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 16 -.211 (5.36) +.160 (4.06) 35 -.090 (2.29) -.004 (0.10) 17 -.123 (3.12) +.217 (5.51) 36 -.045 (1.14) +.074 (1.88) 18 -.045 (1.14) +.262 (6.65) 37 +.000 (0.00) (Inactive for new design for MIL-DTL-38999) -.004 (0.10) 19 +.045 (1.14) +.172 (4.37) Shell size Arrangement no. Number of contacts Size contacts Service Contact Supersedes rating location 15 -37 37 22M M All MS20052-37 FIGURE 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 31 Contacts (Insert arrangement 15-97) Location Location Contact position ID X-axis (mm) Contact position Y-axis (mm) ID X-axis (mm) Y-axis (mm) A +.065 (1.65) +.234 (5.94) G -.207 (5.26) -.095 (2.41) B +.178 (4.52) +.178 (4.52) H -.234 (5.94) +.065 (1.65) C +.230 (5.84) -.023 (0.58) J -.178 (4.52) +.178 (4.52) D +.178 (4.52) -.178 (4.52) K -.065 (1.65) +.234 (5.94) E +.065 (1.65) -.234 (5.94) L -.047 (1.19) +.081 (2.06) F -.089 (2.26) -.235 (5.97) M +.047 (1.19) -.081 (2.06) Shell size Arrangement no. Number of contacts Size Service rating Contact location Supersedes contacts 4 16 C, G, L, M 15 -97 FIGURE 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. 8 20 I All others MS20052-97 MIL-STD-1560B 32 Contacts (Insert arrangement 15-35) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 +.045 (1.14) +.262 (6.65) 20 +.123 (3.12) +.119 (3.02) 2 +.123 (3.12) +.217 (5.51) 21 +.170 (4.32) +.040 (1.02) 3 +.211 (5.36) +.160 (4.06) 22 +.170 (4.32) -.050 (1.27) 4 +.254 (6.45) +.080 (2.03) 23 +.123 (3.12) -.127 (3.23) 5 +.266 (6.76) -.010 (.25) 24 +.045 (1.14) -.172 (4.37) 6 +.247 (6.27) -.098 (2.49) 25 -.045 (1.14) -.172 (4.37) 7 +.200 (5.08) -.175 (4.45) 26 -.123 (3.12) -.127 (3.23) 8 +.130 (3.30) -.232 (5.89) 27 -.170 (4.32) -.050 (1.27) 9 +.045 (1.14) -.262 (6.65) 28 -.170 (4.32) +.040 (1.02) 10 -.045 (1.14) -.262 (6.65) 29 -.123 (3.12) +.119 (3.02) 11 -.130 (3.30) -.232 (5.89) 30 -.045 (1.14) +.172 (4.37) 12 -.200 (5.08) -.175 (4.45) 31 +.045 (1.14) +.074 (1.88) 13 -.247 (6.27) -.098 (2.49) 32 +.090 (2.29) -.004 (0.10) 14 -.266 (6.76) -.010 (.25) 33 +.045 (1.14) -.082 (2.08) 15 -.254 (6.45) +.080 (2.03) 34 -.045 (1.14) -.082 (2.08) FIGURE 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 33 Contacts (Insert arrangement 15-35) Location Location Contact position ID X-axis Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) (mm) 16 -.211 (5.36) +.160 (4.06) 35 -.090 (2.29) -.004 (0.10) 17 -.123 (3.12) +.217 (5.51) 36 -.045 (1.14) +.074 (1.88) 18 -.045 (1.14) +.262 (6.65) 37 +.000 (0.00) -.004 (0.10) 19 +.045 (1.14) +.172 (4.37) (Applicable to MIL-DTL-38999 only) Shell size Arrangement no. Number of contacts Size Service Contact Supersedes contacts rating location 15 -35 37 22D M All MS27528-35 FIGURE 4. Insert arrangement, electrical connector, shell size 15 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 34 Contacts (Insert arrangement 17-6) Location Contact position ID X-axis (mm) Y-axis (mm) A +.121 (3.07) +.209 (5.31) B +.241 (6.12) +.000 (0.00) C +.000 (0.00) -.241 (6.12) D -.241 (6.12) +.000 (0.00) Shell size Arrangement no. E -.121 (3.07) +.209 (5.31) F +.000 (0.00) +.000 (0.00) Number of Size Service Contact Supersedes contacts contacts rating location 17 -6 6 12 I All MS20053-6 FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600). MIL-STD-1560B 35 Contacts (Insert arrangement 17-8) Location Contact position ID X-axis (mm) Y-axis (mm) A +.000 (0.00) +.236 (5.99) B +.128 (3.25) +.086 (2.18) C +.230 (5.84) -.078 (1.98) D +.094 (2.39) -.216 (5.49) E -.094 (2.39) -.216 (5.49) F -.230 (5.84) -.078 (1.98) G -.128 (3.25) +.086 (2.18) Shell size H +.000 (0.00) -.052 (1.32) Arrangement no. Number of Size Service Contact contacts contacts rating location Supersedes 17 -8 8 16 II All MS20053-8 FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 36 Contacts (Insert arrangement 17-11) Location Location Contact position ID X-axis (mm) Y-axis Contact position X-axis (mm) Y-axis (mm) ID (mm) A +.000 (0.00) +.290 (7.37) G -.190 (4.83) -.199 (5.05) B +.200 (5.08) +.100 (2.54) H -.275 (6.99) -.088 (2.24) C +.275 (6.99) -.088 (2.24) J -.200 (5.08) +.100 (2.54) D +.190 (4.83) -.199 (5.05) K +.000 (0.00) +.150 (3.81) E +.071 (1.80) -.282 (7.16) L +.000 (0.00) -.075 (1.91) Standard contacts Shell size Arrangement no. Number of contacts Size contactsService rating F -.071 (1.80) -.282 (7.16) Contact position ID Pin Socket 1 12 Coax J M39029/28-211 M39029/75-416 2 12 Twinax B, L 02004-936 02003-926 17 -11 8 20 N A, C, D,E, F,G, H, K M39029/58-363 M39029/56-351 FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 37 Contacts (Insert arrangement 17-99) Contact location Contact location Contact position ID X-axis (mm) Y-axis Contact position ID X-axis (mm) Y-axis (mm) (mm) A .000 (0.00) +.321 (8.15) N -.305 (7.75) +.099 (2.51) B +.131 (3.33) +.293 (7.44) P -.239 (6.07) +.214 (5.44) C +.239 (6.07) +.214 (5.44) R -.131 (3.33) +.293 (7.44) D +.305 (7.75) +.099 (2.51) S -.070 (1.78) +.177 (4.50) E +.319 (8.10) -.034 (0.86) T +.070 (1.78) +.177 (4.50) F +.278 (7.06) -.161 (4.09) U +.175 (4.45) +.094 (2.39) G +.189 (4.80) -.260 (6.60) V +.150 (3.81) -.075 (1.91) H +.067 (1.70) -.314 (7.98) W +.000 (0.00) -.161 (4.09) J -.067 (1.70) -.314 (7.98) X -.150 (3.81) -.075 (1.91) K -.189 (4.80) -.260 (6.60) Y -.175 (4.45) +.094 (2.39) L -.278 (7.06) -.161 (4.09) Z +.000 (0.00) +.025 (0.64) M -.319 (8.10) -.034 (0.86) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact position ID Supersedes 2 16 W, Z 17 -99 21 20 I All others MS20053-99 FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 38 Contacts (Insert arrangement 17-26) Contact location Contact location Contact position ID X-axis (mm) Y-axis Contact position ID X-axis (mm) Y-axis (mm) (mm) A +.000 (0.00) +.321 (8.15) P -.239 (6.07) +.214 (5.44) B +.131 (3.33) +.293 (7.44) R -.131 (3.33) +.293 (7.44) C +.239 (6.07) +.214 (5.44) S -.070 (1.78) +.177 (4.50) D +.305 (7.75) +.099 (2.51) T +.070 (1.78) +.177 (4.50) E +.319 (8.10) -.034 (0.86) U +.175 (4.45) +.094 (2.39) F +.278 (7.06) -.161 (4.09) V +.178 (4.52) -.036 (0.91) G +.189 (4.80) -.260 (6.60) W +.119 (3.02) -.151 (3.84) H +.067 (1.70) -.314 (7.98) X +.000 (0.00) -.203 (5.16) J -.067 (1.70) -.314 (7.98) Y -.119 (3.02) -.151 (3.84) K -.189 (4.80) -.260 (6.60) Z -.178 (4.52) -.036 (0.91) L -.278 (7.06) -.161 (4.09) a -.175 (4.45) +.094 (2.39) M -.319 (8.10) -.034 (0.86) b +.000 (0.00) +.065 (1.65) N -.305 (7.75) +.099 (2.51) c +.000 (0.00) -.065 (1.65) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact position ID Supersedes 17 -26 26 20 I All MS20053-26 FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 39 Contacts (Insert arrangement 17-2) Location Location Contact position ID X-axis (mm) Y-axis Contact position ID X-axis (mm) Y-axis (mm) (mm) 1 +.046 (1.17) +.325 (8.26) 21 -.133 (3.38) +.299 (7.59) 2 +.133 (3.38) +.299 (7.59) 22 -.046 (1.17) +.325 (8.26) 3 +.211 (5.36) +.251 (6.38) 23 +.046 (1.17) +.231 (5.87) 4 +.272 (6.91) +.183 (4.65) 24 +.129 (3.28) +.197 (5.00) 5 +.312 (7.92) +.101 (2.57) 25 +.194 (4.93) +.133 (3.38) 6 +.328 (8.33) +.011 (0.28) 26 +.230 (5.84) +.050 (1.27) 7 +.318 (8.08) -.079 (2.01) 27 +.232 (5.89) -.040 (1.02) 8 +.284 (7.21) -.164 (4.17) 28 +.200 (5.08) -.125 (3.18) 9 +.228 (5.79) -.236 (5.99) 29 +.137 (3.48) -.191 (4.85) 10 +.154 (3.91) -.289 (7.34) 30 +.055 (1.40) -.229 (5.82) 11 +.068 (1.73) -.321 (8.15) 31 -.055 (1.40) -.229 (5.82) 12 -.068 (1.73) -.321 (8.15) 32 -.137 (3.48) -.191 (4.85) 13 -.154 (3.91) -.289 (7.34) 33 -.200 (5.08) -.125 (3.18) 14 -.228 (5.79) -.236 (5.99) 34 -.232 (5.89) -.040 (1.02) 15 -.284 (7.21) -.164 (4.17) 35 -.230 (5.84) +.050 (1.27) 16 -.318 (8.08) -.079 (2.01) 36 -.194 (4.93) +.133 (3.38) FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 40 Contacts (Insert arrangement 17-2) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 17 -.328 (8.33) +.011 (0.28) 37 -.129 (3.28) +.197 (5.00) 18 -.312 (7.92) +.101 (2.57) 38 -.046 (1.17) +.231 (5.87) 19 -.272 (6.91) +.183 (4.65) 39 +.000 (0.00) -.000 (0.00) 20 -.211 (5.36) +.251 (6.38) Standard contact Shell size Arrangement no. Number of contacts Size contacts Service rating Contact position ID Pin Socket 38 22D M All other M39029/58-360 M39029/56-348 17 -2 1 8 (See note) Twinax 39 M39029/90-529 M39029/91-530 NOTE: The SAE-AS39029/90 and 91 size 8 coaxial data bus contacts are not fully compatible with this insert arrangement and will require the use of a separate boot to seal properly and reduce the splaying of the contact. FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 41 Contacts (Insert arrangement 17-35) Location Location Contact position ID X-axis (mm) Y-axis Contact position ID X-axis (mm) Y-axis (mm) (mm) 1 -.312 (7.92) +.086 (2.18) 29 .000 (0.00) -.094 (2.39) 2 -.312 (7.92) -.004 (0.10) 30 .000 (0.00) -.184 (4.67) 3 -.312 (7.92) -.094 (2.39) 31 .000 (0.00) -.274 (6.96) 4 -.242 (6.15) +.221 (5.61) 32 +.089 (2.26) +.316 (8.03) 5 -.234 (5.94) +.131 (3.33) 33 +.078 (1.98) +.221 (5.61) 6 -.234 (5.94) +.041 (1.04) 34 +.078 (1.98) +.131 (3.33) 7 -.234 (5.94) -.049 (1.24) 35 +.078 (1.98) +.041 (1.04) 8 -.234 (5.94) -.139 (3.53) 36 +.078 (1.98) -.049 (1.24) 9 -.234 (5.94) -.229 (5.82) 37 +.078 (1.98) -.139 (3.53) 10 -.172 (4.37) +.279 (7.09) 38 +.078 (1.98) -.229 (5.82) 11 -.156 (3.96) +.176 (4.47) 39 +.078 (1.98) -.319 (8.10) 12 -.156 (3.96) +.086 (2.18) 40 +.172 (4.37) +.279 (7.09) 13 -.156 (3.96) -.004 (0.10) 41 +.156 (3.96) +.176 (4.47) 14 -.156 (3.96) -.094 (2.39) 42 +.156 (3.96) +.086 (2.18) 15 -.156 (3.96) -.184 (4.67) 43 +.156 (3.96) -.004 (0.10) 16 -.156 (3.96) -.274 (6.96) 44 +.156 (3.96) -.094 (2.39) 17 -.089 (2.26) +.316 (8.03) 45 +.156 (3.96) -.184 (4.67) 18 -.078 (1.98) +.221 (5.61) 46 +.156 (3.96) -.274 (6.96) FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 42 Contacts (Insert arrangement 17-35) Location Location Contact position ID X-axis (mm) Y-axis Contact position ID X-axis (mm) Y-axis (mm) (mm) 19 -.078 (1.98) +.131 (3.33) 47 +.242 (6.15) +.221 (5.61) 20 -.078 (1.98) +.041 (1.04) 48 +.234 (5.94) +.131 (3.33) 21 -.078 (1.98) -.049 (1.24) 49 +.234 (5.94) +.041 (1.04) 22 -.078 (1.98) -.139 (3.53) 50 +.234 (5.94) -.049 (1.24) 23 -.078 (1.98) -.229 (5.82) 51 +.234 (5.94) -.139 (3.53) 24 -.078 (1.98) -.319 (8.10) 52 +.234 (5.94) -.229 (5.82) 25 .000 (0.00) +.329 (8.36) 53 +.312 (7.92) +.086 (2.18) 26 .000 (0.00) +.176 (4.47) 54 +.312 (7.92) -.004 (0.10) 27 .000 (0.00) +.086 (2.18) 55 +.312 (7.92) -.094 (2.39) 28 .000 (0.00) -.004 (0.10) Shell Arrangement no. Number of Size Service Contact location Supersedes size contacts contacts rating FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. 17 -35 55 22D M All MS27529-35 MIL-STD-1560B 43 Contacts (Insert arrangement 17-55) Location Location Contact position ID X-axis (mm) Y-axis Contact position ID X-axis (mm) Y-axis (mm) (mm) 1 -.312 (7.92) +.086 (2.18) 29 +.000 (0.00) -.094 (2.39) 2 -.312 (7.92) -.004 (0.10) 30 +.000 (0.00) -.184 (4.67) 3 -.312 (7.92) -.094 (2.39) 31 +.000 (0.00) -.274 (6.96) 4 -.242 (6.15) +.221 (5.61) 32 +.089 (2.26) +.316 (8.03) 5 -.234 (5.94) +.131 (3.33) 33 +.078 (1.98) +.221 (5.61) 6 -.234 (5.94) +.041 (1.04) 34 +.078 (1.98) +.131 (3.33) 7 -.234 (5.94) -.049 (1.24) 35 +.078 (1.98) +.041 (1.04) 8 -.234 (5.94) -.139 (3.53) 36 +.078 (1.98) -.049 (1.24) 9 -.234 (5.94) -.229 (5.82) 37 +.078 (1.98) -.139 (3.53) 10 -.172 (4.37) +.279 (7.09) 38 +.078 (1.98) -.229 (5.82) 11 -.156 (3.96) +.176 (4.47) 39 +.078 (1.98) -.319 (8.10) 12 -.156 (3.96) +.086 (2.18) 40 +.172 (4.37) +.279 (7.09) 13 -.156 (3.96) -.004 (0.10) 41 +.156 (3.96) +.176 (4.47) 14 -.156 (3.96) -.094 (2.39) 42 +.156 (3.96) +.086 (2.18) 15 -.156 (3.96) -.184 (4.67) 43 +.156 (3.96) -.004 (0.10) 16 -.156 (3.96) -.274 (6.96) 44 +.156 (3.96) -.094 (2.39) 17 -.089 (2.26) +.316 (8.03) 45 +.156 (3.96) -.184 (4.67) 18 -.078 (1.98) +.221 (5.61) 46 +.156 (3.96) -.274 (6.96) FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 44 Contacts (Insert arrangement 17-55) Location Location Contact position ID X-axis (mm) Y-axis Contact position ID X-axis (mm) Y-axis (mm) (mm) 19 -.078 (1.98) +.131 (3.33) 47 +.242 (6.15) +.221 (5.61) 20 -.078 (1.98) +.041 (1.04) 48 +.234 (5.94) +.131 (3.33) 21 -.078 (1.98) -.049 (1.24) 49 +.234 (5.94) +.041 (1.04) 22 -.078 (1.98) -.139 (3.53) 50 +.234 (5.94) -.049 (1.24) 23 -.078 (1.98) -.229 (5.82) 51 +.234 (5.94) -.139 (3.53) 24 -.078 (1.98) -.319 (8.10) 52 +.234 (5.94) -.229 (5.82) 25 +.000 (0.00) +.329 (8.36) 53 +.312 (7.92) +.086 (2.18) 26 +.000 (0.00) +.176 (4.47) 54 +.312 (7.92) -.004 (0.10) 27 +.000 (0.00) +.086 (2.18) 55 +.312 (7.92) -.094 (2.39) 28 +.000 (0.00) -.004 (0.10) NOTE: Inactive for new design. Shell Arrangement no. Number of Size Service Contact Supersedes size contacts contacts rating location FIGURE 5. Insert arrangement, electrical connector, shell size 17 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. 17 -55 55 22M M All MS20053-55 MIL-STD-1560B 45 Contacts (Insert arrangement 19-11) Location Location Contact position ID X-axis (mm) Y-axis Contact position X-axis (mm) Y-axis (mm) ID (mm) A +.105 (2.67) +.260 (6.60) G -.275 (6.99) -.053 (1.35) B +.250 (6.35) +.132 (3.35) H -.250 (6.35) +.132 (3.35) C +.275 (6.99) -.053 (1.35) J -.105 (2.67) +.260 (6.60) D +.179 (4.55) -.215 (5.46) K +.000 (0.00) +.105 (2.67) E +.000 (0.00) -.281 (7.14) L +.000 (0.00) -.092 (2.34) F -.179 (4.55) -.215 (5.46) Shell Arrangement no. Number of Size Service Contact location Supersedes size contacts contacts rating 19 -11 11 16 II All MS20054-11 FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999,Series I of MIL-DTL-27599, and Series A of MIL-C-29600). MIL-STD-1560B 46 Contacts (Insert arrangement 19-28) Contact location Contact location Contact position ID X-axis Contact position ID Y-axis X-axis (mm) Y-axis (mm) (mm) (mm) A +.066 (1.68) +.353 (8.97) R -.286 (7.26) +.217 (5.51) B +.189 (4.80) +.305 (7.75) S -.189 (4.80) +.305 (7.75) C +.286 (7.26) +.217 (5.51) T -.066 (1.68) +.353 (8.97) D +.345 (8.76) +.098 (2.49) U +.000 (0.00) +.230 (5.84) E +.357 (9.07) -.033 (0.84) V +.124 (3.15) +.193 (4.90) F +.321 (8.15) -.160 (4.06) W +.209 (5.31) +.095 (2.41) G +.242 (6.15) -.265 (6.73) X +.228 (5.79) -.033 (0.84) H +.130 (3.30) -.335 (8.51) Y +.174 (4.42) -.151 (3.84) J +.000 (0.00) -.359 (9.12) Z +.000 (0.00) -.191 (4.85) K -.130 (3.30) -.335 (8.51) a -.174 (4.42) -.151 (3.84) L -.242 (6.15) -.265 (6.73) b -.228 (5.79) -.033 (0.84) M -.321 (8.15) -.160 (4.06) c -.209 (5.31) +.095 (2.41) N -.357 (9.07) -.033 (0.84) d -.124 (3.15) +.193 (4.90) P -.345 (8.76) +.098 (2.49) e +.000 (0.00) +.062 (1.57) Shell Arrangement no. Number of contacts Size contacts Service rating Contact Supersedes size location 2 16 e, Z 19 -28 26 20 I All others MS20054-28 FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 47 Contacts (Insert arrangement 19-30) Contact location Contact location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) A +.065 (1.65) +.346 (8.79) S -.065 (1.65) +.346 (8.79) B +.186 (4.72) +.299 (7.59) T +.084 (2.13) +.217 (5.51) C +.282 (7.16) +.210 (5.33) U +.181 (4.60) +.129 (3.28) D +.340 (8.64) +.093 (2.36) V +.228 (5.79) +.008 (0.20) E +.351 (8.92) -.033 (0.84) W +.193 (4.90) -.117 (2.97) F +.315 (8.00) -.158 (4.01) X +.096 (2.44) -.203 (5.16) G +.236 (5.99) -.261 (6.63) Y +.000 (0.00) -.290 (7.37) H +.124 (3.15) -.330 (8.38) Z -.096 (2.44) -.203 (5.16) J -.124 (3.15) -.330 (8.38) a -.193 (4.90) -.117 (2.97) K -.236 (5.99) -.261 (6.63) b -.228 (5.79) +.008 (0.20) L -.315 (8.00) -.158 (4.01) c -.181 (4.60) +.129 (3.28) M -.351 (8.92) -.033 (0.84) d -.084 (2.13) +.217 (5.51) N -.340 (8.64) +.093 (2.36) e +.000 (0.00) +.072 (1.83) P -.282 (7.16) +.210 (5.33) f +.069 (1.75) -.076 (1.93) R -.186 (4.72) +.299 (7.59) g -.069 (1.75) -.076 (1.93) Shell size Arrangement no. Number of contacts Size contacts Service Contact Supersedes rating location 1 16 e 19 -30 29 20 I All others MS20054-30 FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 48 Contacts (Insert arrangement 19-32) Contact location Contact location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) A +.066 (1.68) +.353 (8.97) T -.066 (1.68) +.353 (8.97) B +.189 (4.80) +.305 (7.75) U +.000 (0.00) +.230 (5.84) C +.286 (7.26) +.217 (5.51) V +.124 (3.15) +.193 (4.90) D +.345 (8.76) +.098 (2.49) W +.209 (5.31) +.095 (2.41) E +.357 (9.07) -.033 (0.84) X +.228 (5.79) -.033 (0.84) F +.321 (8.15) -.160 (4.06) Y +.174 (4.42) -.151 (3.84) G +.242 (6.15) -.265 (6.73) Z +.065 (1.65) -.221 (5.61) H +.130 (3.30) -.335 (8.51) a -.065 (1.65) -.221 (5.61) J -.000 (0.00) -.359 (9.12) b -.174 (4.42) -.151 (3.84) K -.130 (3.30) -.335 (8.51) c -.228 (5.79) -.033 (0.84) L -.242 (6.15) -.265 (6.73) d -.209 (5.31) +.095 (2.41) M -.321 (8.15) -.160 (4.06) e -.124 (3.15) +.193 (4.90) N -.357 (9.07) -.033 (0.84) f +.000 (0.00) +.096 (2.44) P -.345 (8.76) +.098 (2.49) g +.096 (2.44) +.000 (0.00) R -.286 (7.26) +.217 (5.51) h +.000 (0.00) -.096 (2.44) S -.189 (4.80) +.305 (7.75) j -.096 (2.44) +.000 (0.00) FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. Shell Arrangement no. Number of Size Service rating Contact size contacts contacts location Supersedes 19 -32 32 20 I All MS20054-32MIL-STD-1560B 49 Contacts (Insert arrangement 19-67) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 -.357 (9.07) +.081 (2.06) 35 +.088 (2.24) +.360 (9.14) 2 -.357 (9.07) -.009 (0.23) 36 +.045 (1.14) +.261 (6.63) 3 -.357 (9.07) -.099 (2.51) 37 +.045 (1.14) +.171 (4.34) 4 -.304 (7.72) +.213 (5.41) 38 +.045 (1.14) +.081 (2.06) 5 -.279 (7.09) +.126 (3.20) 39 +.045 (1.14) -.009 (0.23) 6 -.279 (7.09) +.036 (0.91) 40 +.045 (1.14) -.099 (2.51) 7 -.279 (7.09) -.054 (1.37) 41 +.045 (1.14) -.189 (4.80) 8 -.279 (7.09) -.144 (3.66) 42 +.045 (1.14) -.279 (7.09) 9 -.279 (7.09) -.234 (5.94) 43 +.045 (1.14) -.369 (9.37) 10 -.244 (6.20) +.280 (7.11) 44 +.156 (3.96) +.301 (7.65) 11 -.201 (5.11) +.171 (4.34) 45 +.123 (3.12) +.216 (5.49) 12 -.201 (5.11) +.081 (2.06) 46 +.123 (3.12) +.126 (3.20) 13 -.201 (5.11) -.009 (0.23) 47 +.123 (3.12) +.036 (0.91) 14 -.201 (5.11) -.099 (2.51) 48 +.123 (3.12) -.054 (1.37) 15 -.201 (5.11) -.189 (4.80) 49 +.123 (3.12) -.144 (3.66) 16 -.201 (5.11) -.279 (7.09) 50 +.123 (3.12) -.234 (5.94) 17 -.156 (3.96) +.301 (7.65) 51 +.123 (3.12) -.324 (8.23) FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 50 Contacts (Insert arrangement 19-67) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 18 -.123 (3.12) +.216 (5.49) 52 +.244 (6.20) +.280 (7.11) 19 -.123 (3.12) +.126 (3.20) 53 +.201 (5.11) +.171 (4.34) 20 -.123 (3.12) +.036 (0.91) 54 +.201 (5.11) +.081 (2.06) 21 -.123 (3.12) -.054 (1.37) 55 +.201 (5.11) -.009 (.23) 22 -.123 (3.12) -.144 (3.66) 56 +.201 (5.11) -.099 (2.51) 23 -.123 (3.12) -.234 (5.94) 57 +.201 (5.11) -.189 (4.80) 24 -.123 (3.12) -.324 (8.23) 58 +.201 (5.11) -.279 (7.09) 25 -.088 (2.24) +.360 (9.14) 59 +.304 (7.72) +.213 (5.41) 26 -.000 (0.00) +.339 (8.61) 60 +.279 (7.09) +.126 (3.20) 27 -.045 (1.14) +.261 (6.63) 61 +.279 (7.09) +.036 (0.91) 28 -.045 (1.14) +.171 (4.34) 62 +.279 (7.09) -.054 (1.37) 29 -.045 (1.14) +.081 (2.06) 63 +.279 (7.09) -.144 (3.66) 30 -.045 (1.14) -.009 (0.23) 64 +.279 (7.09) -.234 (5.94) 31 -.045 (1.14) -.099 (2.51) 65 +.357 (9.07) +.081 (2.06) 32 -.045 (1.14) -.189 (4.80) 66 +.357 (9.07) -.009 (0.23) 33 -.045 (1.14) -.279 (7.09) 67 +.357 (9.07) -.099 (2.51) 34 -.045 (1.14) -.369 (9.37) (Inactive for new design for MIL-DTL-38999) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 19 -67 67 22M M All MS20054-67 FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 51 Contacts (Insert arrangement 19-35) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 -.357 (9.07) +.090 (2.29) 34 +.045 (1.14) +.360 (9.14) 2 -.357 (9.07) +.000 (0.00) 35 +.045 (1.14) +.270 (6.86) 3 -.357 (9.07) -.090 (2.29) 36 +.045 (1.14) +.180 (4.57) 4 -.279 (7.09) +.225 (5.72) 37 +.045 (1.14) +.090 (2.29) 5 -.279 (7.09) +.135 (3.43) 38 +.045 (1.14) +.000 (0.00) 6 -.279 (7.09) +.045 (1.14) 39 +.045 (1.14) -.090 (2.29) 7 -.279 (7.09) -.045 (1.14) 40 +.045 (1.14) -.180 (4.57) 8 -.279 (7.09) -.135 (3.43) 41 +.045 (1.14) -.270 (6.86) 9 -.279 (7.09) -.225 (5.72) 42 +.045 (1.14) -.360 (9.14) 10 -.201 (5.11) +.270 (6.86) 43 +.123 (3.12) +.315 (8.00) 11 -.201 (5.11) +.180 (4.57) 44 +.123 (3.12) +.225 (5.72) 12 -.201 (5.11) +.090 (2.29) 45 +.123 (3.12) +.135 (3.43) 13 -.201 (5.11) +.000 (0.00) 46 +.123 (3.12) +.045 (1.14) 14 -.201 (5.11) -.090 (2.29) 47 +.123 (3.12) -.045 (1.14) 15 -.201 (5.11) -.180 (4.57) 48 +.123 (3.12) -.135 (3.43) 16 -.201 (5.11) -.270 (6.86) 49 +.123 (3.12) -.225 (5.72) 17 -.123 (3.12) +.315 (8.00) 50 +.123 (3.12) -.315 (8.00) FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 52 Contacts (Insert arrangement 19-35) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 18 -.123 (3.12) +.225 (5.72) 51 +.201 (5.11) +.270 (6.86) 19 -.123 (3.12) +.135 (3.43) 52 +.201 (5.11) +.180 (4.57) 20 -.123 (3.12) +.045 (1.14) 53 +.201 (5.11) +.090 (2.29) 21 -.123 (3.12) -.045 (1.14) 54 +.201 (5.11) +.000 (0.00) 22 -.123 (3.12) -.135 (3.43) 55 +.201 (5.11) -.090 (2.29) 23 -.123 (3.12) -.225 (5.72) 56 +.201 (5.11) -.180 (4.57) 24 -.123 (3.12) -.315 (8.00) 57 +.201 (5.11) -.270 (6.86) 25 -.045 (1.14) +.360 (9.14) 58 +.279 (7.09) +.225 (5.72) 26 -.045 (1.14) +.270 (6.86) 59 +.279 (7.09) +.135 (3.43) 27 -.045 (1.14) +.180 (4.57) 60 +.279 (7.09) +.045 (1.14) 28 -.045 (1.14) +.090 (2.29) 61 +.279 (7.09) -.045 (1.14) 29 -.045 (1.14) +.000 (0.00) 62 +.279 (7.09) -.135 (3.43) 30 -.045 (1.14) -.090 (2.29) 63 +.279 (7.09) -.225 (5.72) 31 -.045 (1.14) -.180 (4.57) 64 +.357 (9.07) +.090 (2.29) 32 -.045 (1.14) -.270 (6.86) 65 +.357 (9.07) +.000 (0.00) 33 -.045 (1.14) -.360 (9.14) 66 +.357 (9.07) -.090 (2.29) (Applicable to MIL-DTL-38999 only) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 19 -35 66 22D M All MS27530-35 FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 53 Contacts (Insert arrangement 19-66) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 -.357 (9.07) +.090 (2.29) 34 +.045 (1.14) +.360 (9.14) 2 -.357 (9.07) +.000 (0.00) 35 +.045 (1.14) +.270 (6.86) 3 -.357 (9.07) -.090 (2.29) 36 +.045 (1.14) +.180 (4.57) 4 -.279 (7.09) +.225 (5.72) 37 +.045 (1.14) +.090 (2.29) 5 -.279 (7.09) +.135 (3.43) 38 +.045 (1.14) +.000 (0.00) 6 -.279 (7.09) +.045 (1.14) 39 +.045 (1.14) -.090 (2.29) 7 -.279 (7.09) -.045 (1.14) 40 +.045 (1.14) -.180 (4.57) 8 -.279 (7.09) -.135 (3.43) 41 +.045 (1.14) -.270 (6.86) 9 -.279 (7.09) -.225 (5.72) 42 +.045 (1.14) -.360 (9.14) 10 -.201 (5.11) +.270 (6.86) 43 +.123 (3.12) +.315 (8.00) 11 -.201 (5.11) +.180 (4.57) 44 +.123 (3.12) +.225 (5.72) 12 -.201 (5.11) +.090 (2.29) 45 +.123 (3.12) +.135 (3.43) 13 -.201 (5.11) +.000 (0.00) 46 +.123 (3.12) +.045 (1.14) 14 -.201 (5.11) -.090 (2.29) 47 +.123 (3.12) -.045 (1.14) 15 -.201 (5.11) -.180 (4.57) 48 +.123 (3.12) -.135 (3.43) 16 -.201 (5.11) -.270 (6.86) 49 +.123 (3.12) -.225 (5.72) 17 -.123 (3.12) +.315 (8.00) 50 +.123 (3.12) -.315 (8.00) FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 54 Contacts (Insert arrangement 19-66) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 18 -.123 (3.12) +.225 (5.72) 51 +.201 (5.11) +.270 (6.86) 19 -.123 (3.12) +.135 (3.43) 52 +.201 (5.11) +.180 (4.57) 20 -.123 (3.12) +.045 (1.14) 53 +.201 (5.11) +.090 (2.29) 21 -.123 (3.12) -.045 (1.14) 54 +.201 (5.11) +.000 (0.00) 22 -.123 (3.12) -.135 (3.43) 55 +.201 (5.11) -.090 (2.29) 23 -.123 (3.12) -.225 (5.72) 56 +.201 (5.11) -.180 (4.57) 24 -.123 (3.12) -.315 (8.00) 57 +.201 (5.11) -.270 (6.86) 25 -.045 (1.14) +.360 (9.14) 58 +.279 (7.09) +.225 (5.72) 26 -.045 (1.14) +.270 (6.86) 59 +.279 (7.09) +.135 (3.43) 27 -.045 (1.14) +.180 (4.57) 60 +.279 (7.09) +.045 (1.14) 28 -.045 (1.14) +.090 (2.29) 61 +.279 (7.09) -.045 (1.14) 29 -.045 (1.14) +.000 (0.00) 62 +.279 (7.09) -.135 (3.43) 30 -.045 (1.14) -.090 (2.29) 63 +.279 (7.09) -.225 (5.72) 31 -.045 (1.14) -.180 (4.57) 64 +.357 (9.07) +.090 (2.29) 32 -.045 (1.14) -.270 (6.86) 65 +.357 (9.07) +.000 (0.00) 33 -.045 (1.14) -.360 (9.14) 66 +.357 (9.07) -.090 (2.29) (Inactive for new design for MIL-DTL-38999) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 19 -66 66 22M M All MS20054-66 FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 55 Contacts (Insert arrangement 19-45) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 -.357 (9.07) +.081 (2.06) 35 +.088 (2.24) +.360 (9.14) 2 -.357 (9.07) -.009 (0.23) 36 +.045 (1.14) +.261 (6.63) 3 -.357 (9.07) -.099 (2.51) 37 +.045 (1.14) +.171 (4.34) 4 -.304 (7.72) +.213 (5.41) 38 +.045 (1.14) +.081 (2.06) 5 -.279 (7.09) +.126 (3.20) 39 +.045 (1.14) -.009 (.23) 6 -.279 (7.09) +.036 (0.91) 40 +.045 (1.14) -.099 (2.51) 7 -.279 (7.09) -.054 (1.37) 41 +.045 (1.14) -.189 (4.80) 8 -.279 (7.09) -.144 (3.66) 42 +.045 (1.14) -.279 (7.09) 9 -.279 (7.09) -.234 (5.94) 43 +.045 (1.14) -.369 (9.37) 10 -.244 (6.20) +.280 (7.11) 44 +.156 (3.96) +.301 (7.65) 11 -.201 (5.11) +.171 (4.34) 45 +.123 (3.12) +.216 (5.49) 12 -.201 (5.11) +.081 (2.06) 46 +.123 (3.12) +.126 (3.20) 13 -.201 (5.11) -.009 (0.23) 47 +.123 (3.12) +.036 (0.91) 14 -.201 (5.11) -.099 (2.51) 48 +.123 (3.12) -.054 (1.37) 15 -.201 (5.11) -.189 (4.80) 49 +.123 (3.12) -.144 (3.66) 16 -.201 (5.11) -.279 (7.09) 50 +.123 (3.12) -.234 (5.94) 17 -.156 (3.96) +.301 (7.65) 51 +.123 (3.12) -.324 (8.23) FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 56 Contacts (Insert arrangement 19-45) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 18 -.123 (3.12) +.216 (5.49) 52 +.244 (6.20) +.280 (7.11) 19 -.123 (3.12) +.126 (3.20) 53 +.201 (5.11) +.171 (4.34) 20 -.123 (3.12) +.036 (0.91) 54 +.201 (5.11) +.081 (2.06) 21 -.123 (3.12) -.054 (1.37) 55 +.201 (5.11) -.009 (0.23) 22 -.123 (3.12) -.144 (3.66) 56 +.201 (5.11) -.099 (2.51) 23 -.123 (3.12) -.234 (5.94) 57 +.201 (5.11) -.189 (4.80) 24 -.123 (3.12) -.324 (8.23) 58 +.201 (5.11) -.279 (7.09) 25 -.088 (2.24) +.360 (9.14) 59 +.304 (7.72) +.213 (5.41) 26 +.000 (0.00) +.339 (8.61) 60 +.279 (7.09) +.126 (3.20) 27 -.045 (1.14) +.261 (6.63) 61 +.279 (7.09) +.036 (0.91) 28 -.045 (1.14) +.171 (4.34) 62 +.279 (7.09) -.054 (1.37) 29 -.045 (1.14) +.081 (2.06) 63 +.279 (7.09) -.144 (3.66) 30 -.045 (1.14) -.009 (0.23) 64 +.279 (7.09) -.234 (5.94) 31 -.045 (1.14) -.099 (2.51) 65 +.357 (9.07) +.081 (2.06) 32 -.045 (1.14) -.189 (4.80) 66 +.357 (9.07) -.009 (0.23) 33 -.045 (1.14) -.279 (7.09) 67 +.357 (9.07) -.099 (2.51) 34 -.045 (1.14) -.369 (9.37) (Applicable to MIL-DTL-38999) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 19 -45 67 22D M All MS27530-45 FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 57 Contacts (Insert arrangement 19-18) Location Location Contact position ID X-axis Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) (mm) A +.068 (1.73) +.380 (9.65) K -.180 (4.57) -.180 (4.57) B +.180 (4.57) +.180 (4.57) L -.377 (9.58) -.065 (1.65) C +.377 (9.58) +.065 (1.65) M -.317 (8.05) +.000 (0.00) D +.317 (8.05) +.000 (0.00) N -.377 (9.58) +.065 (1.65) E +.377 (9.58) -.065 (1.65) P -.180 (4.57) +.180 (4.57) F +.180 (4.57) -.180 (4.57) R -.068 (1.73) +.380 (9.65) G +.068 (1.73) -.380 (9.65) S +.000 (0.00) +.319 (8.10) H +.000 (0.00) -.319 (8.10) T +.000 (0.00) +.044 (1.12) J -.068 (1.73) -.380 (9.65) U +.000 (0.00) NOTE: The SAE-AS39029/90 and 91 size 8 coaxial data bus contacts are not fully compatible with this insert arrangement and will require the use of a separate boot to seal properly and reduce the splaying of the contact. -.044 (1.12) Shell size Arrangement no. Contact Number of contacts Size Service location contacts rating 8 4 TWINAX B,F,K,P (See note) 19 18 14 22D M All others FIGURE 6. Insert arrangement, electrical connector, shell size 19 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 58 Contacts (Insert arrangement 21-11) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) A +.121 (3.07) +.332 (8.43) G -.348 (8.84) -.061 (1.55) B +.306 (7.77) +.177 (4.50) H -.306 (7.77) +.177 (4.50) C +.348 (8.84) -.061 (1.55) J -.121 (3.07) +.332 (8.43) D +.227 (5.77) -.270 (6.86) K +.000 (0.00) +.123 (3.12) E +.000 (0.00) -.353 (8.97) L +.000 (0.00) -.115 (2.92) F -.227 (5.77) -.270 (6.86) Shell Arrangement no. Number of contacts Size Service Contact location Supersedes size contacts rating 21 -11 11 12 I All MS20055-11 FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600). MIL-STD-1560B 59 Contacts (Insert arrangement 21-16) Location Location Contact position ID X-axis Y-axis Contact position ID X-axis Y-axis A +.118 (3.00) +.322 (8.18) J -.341 (8.66) +.036 (0.91)B +.271 (6.88) +.211 (5.36) K -.271 (6.88) +.211 (5.36)C +.341 (8.66) +.036 (0.91) L -.118 (3.00) +.322 (8.18)D +.308 (7.82) -.150 (3.81) M +.000 (0.00) +.175 (4.45)E +.182 (4.62) -.290 (7.37) N +.154 (3.91) +.062 (1.57)F +.000 (0.00) -.343 (8.71) P +.094 (2.39) -.122 (3.10)G -.182 (4.62) -.290 (7.37) R -.094 (2.39) -.122 (3.10)H -.308 (7.82) -.150 (3.81) S -.154 (3.91) +.062 (1.57) Shell Arrangement no. Number of contacts Size contacts Service size rating Contact location Supersedes 21 -16 16 16 II All MS20055-16 FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 60 Contacts (Insert arrangement 21-24) Contact location Contact location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) A +.175 (4.45) +.375 (9.53) N +.150 (3.81) +.200 (5.08) B +.350 (8.89) +.200 (5.08) P +.250 (6.35) +.000 (0.00) C +.400 (10.16) +.000 (0.00) R +.200 (5.08) -.150 (3.81) D +.350 (8.89) -.200 (5.08) S +.075 (1.91) -.250 (6.35) E +.200 (5.08) -.350 (8.89) T -.075 (1.91) -.250 (6.35) F +.000 (0.00) -.400 (10.16) U -.200 (5.08) -.150 (3.81) G -.200 (5.08) -.350 (8.89) V -.250 (6.35) +.000 (0.00) H -.350 (8.89) -.200 (5.08) W -.150 (3.81) +.200 (5.08) J -.400 (10.16) +.000 (0.00) X +.000 (0.00) +.150 (3.81) K -.350 (8.89) +.200 (5.08) Y +.100 (2.54) +.025 (0.64) L -.175 (4.45) +.375 (9.53) Z +.000 (0.00) -.100 (2.54) M +.000 (0.00) +.300 (7.62) a -.100 (2.54) +.025 (0.64) Shell Arrangement no. Number of contacts Size contacts Service rating Contact size location Supersedes 21 -24 24 20 I All MS20055-24 FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 61 Contacts (Insert arrangement 21-25) Contact location Contact location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) A +.000 (0.00) +.400 (10.16) P -.225 (5.72) +.225 (5.72) B +.150 (3.81) +.375 (9.53) R -.150 (3.81) +.375 (9.53) C +.225 (5.72) +.225 (5.72) S +.075 (1.91) +.225 (5.72) D +.375 (9.53) +.175 (4.45) T +.250 (6.35) +.075 (1.91) E +.400 (10.16) +.025 (0.64) U +.150 (3.81) -.200 (5.08) F +.375 (9.53) -.125 (3.18) V -.150 (3.81) -.200 (5.08) G +.275 (6.99) -.300 (7.62) W -.250 (6.35) +.075 (1.91) H +.100 (2.54) -.400 (10.16) X -.075 (1.91) +.225 (5.72) J -.100 (2.54) -.400 (10.16) Y +.000 (0.00) +.075 (1.91) K -.275 (6.99) -.300 (7.62) Z +.125 (3.18) -.025 (0.64) L -.375 (9.53) -.125 (3.18) a +.000 (0.00) -.125 (3.18) M -.400 (10.16) +.025 (0.64) b -.125 (3.18) -.025 (0.64) N -.375 (9.53) +.175 (4.45) Shell size Arrangement No. Number of contacts Size contacts Service rating Contact location Supersedes 21 -25 25 20 I All MS20055-25 FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 62 Contacts (Insert arrangement 21-27) Contact location Contact location Contact position ID X-axis Y-axis Contact position ID X-axis Y-axis A +.000 (0.00) +.400 (10.16) R -.150 (3.81) +.375 (9.53) B +.150 (3.81) +.375 (9.53) S +.125 (3.18) +.225 (5.72) C +.275 (6.99) +.275 (6.99) T +.225 (5.72) +.100 (2.54) D +.375 (9.53) +.150 (3.81) U +.250 (6.35) -.050 (1.27) E +.400 (10.16) +.000 (0.00) V +.150 (3.81) -.200 (5.08) F +.375 (9.53) -.150 (3.81) W +.000 (0.00) -.250 (6.35) G +.275 (6.99) -.300 (7.62) X -.150 (3.81) -.200 (5.08) H +.100 (2.54) -.400 (10.16) Y -.250 (6.35) -.050 (1.27) J -.100 (2.54) -.400 (10.16) Z -.225 (5.72) +.100 (2.54) K -.275 (6.99) -.300 (7.62) a -.125 (3.18) +.225 (5.72) L -.375 (9.53) -.150 (3.81) b +.000 (0.00) +.100 (2.54) M -.400 (10.16) +.000 (0.00) c +.100 (2.54) -.025 (0.64) N -.375 (9.53) +.150 (3.81) d -.100 (2.54) -.025 (0.64) P -.275 (6.99) +.275 (6.99) Shell Arrangement no. Number of contacts Size Service size contacts rating Contact location Supersedes 21 -27 27 20 I All MS20055-27 FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 63 Arrangement (21-41) Shell Arrangement Number of contacts Size contacts Service rating Contact Supersedes size no. location 21 -41 41 20 MS20055-41 I All FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 64 Contacts (Insert arrangement 21-39) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) A +.065 (1.65) +.411 (10.44) X +.000 (0.00) +.295 (7.49) B +.189 (4.80) +.371 (9.42) Y +.126 (3.20) +.256 (6.50) C +.294 (7.47) +.294 (7.47) Z +.232 (5.89) +.179 (4.55) D +.371 (9.42) +.189 (4.80) a +.280 (7.11) +.057 (1.45) E +.411 (10.44) +.065 (1.65) b +.280 (7.11) -.074 (1.88) F +.411 (10.44) -.065 (1.65) c +.217 (5.51) -.189 (4.80) G +.371 (9.42) -.189 (4.80) d +.112 (2.84) -.265 (6.73) H +.294 (7.47) -.294 (7.47) e -.112 (2.84) -.265 (6.73) J +.189 (4.80) -.371 (9.42) f -.217 (5.51) -.189 (4.80) K +.065 (1.65) -.411 (10.44) g -.280 (7.11) -.074 (1.88) L -.065 (1.65) -.411 (10.44) h -.280 (7.11) +.057 (1.45) M -.189 (4.80) -.371 (9.42) i -.232 (5.89) +.179 (4.55) N -.294 (7.47) -.294 (7.47) j -.126 (3.20) +.256 (6.50) P -.371 (9.42) -.189 (4.80) k +.000 (0.00) +.164 (4.17) R -.411 (10.44) -.065 (1.65) m +.114 (2.90) +.048 (1.22) FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 65 Contacts (Insert arrangement 21-39) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) S -.411 (10.44) +.065 (1.65) n +.106 (2.69) -.107 (2.72) T -.371 (9.42) +.189 (4.80) p +.000 (0.00) -.189 (4.80) U -.294 (7.47) +.294 (7.47) q -.106 (2.69) -.107 (2.72) V -.189 (4.80) +.371 (9.42) r -.114 (2.90) +.048 (1.09) W -.065 (1.65) +.411 (10.44) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 2 16 r,m21 -39 37 20 I All others MS20055-39 FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 66 Contacts (Insert arrangement 21-1) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 +.053 (1.35) +.426 (10.82) 41 -.098 (2.49) -.322 (8.18) 2 +.146 (3.71) +.404 (10.26) 42 -.184 (4.67) -.280 (7.11) 3 +.232 (5.89) +.362 (9.19) 43 -.258 (6.55) -.220 (5.59) 4 +.306 (7.77) +.302 (7.67) 44 -.311 (7.90) -.141 (3.58) 5 +.365 (9.27) +.227 (5.77) 45 -.332 (8.43) -.048 (1.22) 6 +.406 (10.31) +.141 (3.58) 46 -.332 (8.43) +.048 (1.22) 7 +.427 (10.85) +.048 (1.22) 47 -.311 (7.90) +.141 (3.58) 8 +.427 (10.85) -.048 (1.22) 48 -.258 (6.55) +.220 (5.59) 9 +.406 (10.31) -.141 (3.58) 49 -.184 (4.67) +.280 (7.11) 10 +.365 (9.27) -.227 (5.77) 50 -.098 (2.49) +.322 (8.18) 11 +.306 (7.77) -.302 (7.67) 51 -.048 (1.22) +.241 (6.12) 12 +.232 (5.89) -.362 (9.19) 52 +.048 (1.22) +.241 (6.12) 13 +.146 (3.71) -.404 (10.26) 53 +.134 (3.40) +.199 (5.05) 14 +.053 (1.35) -.426 (10.82) 54 +.208 (5.28) +.139 (3.53) 15 -.053 (1.35) -.426 (10.82) 55 +.237 (6.02) +.048 (1.22) 16 -.146 (3.71) -.404 (10.26) 56 +.237 (6.02) -.048 (1.22) 17 -.232 (5.89) -.362 (9.19) 57 +.208 (5.28) -.139 (3.53) 18 -.306 (7.77) -.302 (7.67) 58 +.134 (3.40) -.199 (5.05) FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 67 Contacts (Insert arrangement 21-1) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 19 -.365 (9.27) -.227 (5.77) 59 +.048 (1.22) -.241 (6.12) 20 -.406 (10.31) -.141 (3.58) 60 -.048 (1.22) -.241 (6.12) 21 -.427 (10.85) -.048 (1.22) 61 -.134 (3.40) -.199 (5.05) 22 -.427 (10.85) +.048 (1.22) 62 -.208 (5.28) -.139 (3.53) 23 -.406 (10.31) +.141 (3.58) 63 -.237 (6.02) -.048 (1.22) 24 -.365 (9.27) +.227 (5.77) 64 -.237 (6.02) +.048 (1.22) 25 -.306 (7.77) +.302 (7.67) 65 -.208 (5.28) +.139 (3.53) 26 -.232 (5.89) +.362 (9.19) 66 -.134 (3.40) +.199 (5.05) 27 -.146 (3.71) +.404 (10.26) 67 -.048 (1.22) +.146 (3.71) 28 -.053 (1.35) +.426 (10.82) 68 +.048 (1.22) +.146 (3.71) 29 +.000 (0.00) +.323 (8.20) 69 +.125 (3.18) +.090 (2.29) 30 +.098 (2.49) +.322 (8.18) 70 +.155 (3.94) +.000 (0.00) 31 +.184 (4.67) +.280 (7.11) 71 +.125 (3.18) -.090 (2.29) 32 +.258 (6.55) +.220 (5.59) 72 +.048 (1.22) -.146 (3.71) 33 +.311 (7.90) +.141 (3.58) 73 -.048 (1.22) -.146 (3.71) 34 +.332 (8.43) +.048 (1.22) 74 -.125 (3.18) -.090 (2.29) 35 +.332 (8.43) -.048 (1.22) 75 -.155 (3.94) +.000 (0.00) 36 +.311 (7.90) -.141 (3.58) 76 -.125 (3.18) +.090 (2.29) 37 +.258 (6.55) -.220 (5.59) 77 +.000 (0.00) +.053 (1.35) 38 +.184 (4.67) -.280 (7.11) 78 +.048 (1.22) -.029 (0.74) 39 +.098 (2.49) -.322 (8.18) 79 -.048 (1.22) -.029 (0.74) 40 +.000 (0.00) -.347 (8.81) (Inactive for new design for MIL-DTL-38999) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 21 -1 79 22M M 79 MS20055-1 FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 68 Contacts (Insert arrangement 21-35) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 +.053 (1.35) +.426 (10.82) 41 -.098 (2.49) -.322 (8.18) 2 +.146 (3.71) +.404 (10.26) 42 -.184 (4.67) -.280 (7.11) 3 +.232 (5.89) +.362 (9.19) 43 -.258 (6.55) -.220 (5.59) 4 +.306 (7.77) +.302 (7.67) 44 -.311 (7.90) -.141 (3.58) 5 +.365 (9.27) +.227 (5.77) 45 -.332 (8.43) -.048 (1.22) 6 +.406 (10.31) +.141 (3.58) 46 -.332 (8.43) +.048 (1.22) 7 +.427 (10.85) +.048 (1.22) 47 -.311 (7.90) +.141 (3.58) 8 +.427 (10.85) -.048 (1.22) 48 -.258 (6.55) +.220 (5.59) 9 +.406 (10.31) -.141 (3.58) 49 -.184 (4.67) +.280 (7.11) 10 +.365 (9.27) -.227 (5.77) 50 -.098 (2.49) +.322 (8.18) 11 +.306 (7.77) -.302 (7.67) 51 -.048 (1.22) +.241 (6.12) 12 +.232 (5.89) -.362 (9.19) 52 +.048 (1.22) +.241 (6.12) 13 +.146 (3.71) -.404 (10.26) 53 +.134 (3.40) +.199 (5.05) 14 +.053 (1.35) -.426 (10.82) 54 +.208 (5.28) +.139 (3.53) 15 -.053 (1.35) -.426 (10.82) 55 +.237 (6.02) +.048 (1.22) 16 -.146 (3.71) -.404 (10.26) 56 +.237 (6.02) -.048 (1.22) 17 -.232 (5.89) -.362 (9.19) 57 +.208 (5.28) -.139 (3.53) FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 69 Contacts (Insert arrangement 21-35) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 18 -.306 (7.77) -.302 (7.67) 58 +.134 (3.40) -.199 (5.05) 19 -.365 (9.27) -.227 (5.77) 59 +.048 (1.22) -.241 (6.12) 20 -.406 (10.31) -.141 (3.58) 60 -.048 (1.22) -.241 (6.12) 21 -.427 (10.85) -.048 (1.22) 61 -.134 (3.40) -.199 (5.05) 22 -.427 (10.85) +.048 (1.22) 62 -.208 (5.28) -.139 (3.53) 23 -.406 (10.31) +.141 (3.58) 63 -.237 (6.02) -.048 (1.22) 24 -.365 (9.27) +.227 (5.77) 64 -.237 (6.02) +.048 (1.22) 25 -.306 (7.77) +.302 (7.67) 65 -.208 (5.28) +.139 (3.53) 26 -.232 (5.89) +.362 (9.19) 66 -.134 (3.40) +.199 (5.05) 27 -.146 (3.71) +.404 (10.26) 67 -.048 (1.22) +.146 (3.71) 28 -.053 (1.35) +.426 (10.82) 68 +.048 (1.22) +.146 (3.71) 29 +.000 (.00) +.323 (8.20) 69 +.125 (3.18) +.090 (2.29) 30 +.098 (2.49) +.322 (8.18) 70 +.155 (3.94) +.000 (0.00) 31 +.184 (4.67) +.280 (7.11) 71 +.125 (3.18) -.090 (2.29) 32 +.258 (6.55) +.220 (5.59) 72 +.048 (1.22) -.146 (3.71) 33 +.311 (7.90) +.141 (3.58) 73 -.048 (1.22) -.146 (3.71) 34 +.332 (8.43) +.048 (1.22) 74 -.125 (3.18) -.090 (2.29) 35 +.332 (8.43) -.048 (1.22) 75 -.155 (3.94) +.000 (0.00) 36 +.311 (7.90) -.141 (3.58) 76 -.125 (3.18) +.090 (2.29) 37 +.258 (6.55) -.220 (5.59) 77 +.000 (0.00) +.053 (1.35) 38 +.184 (4.67) -.280 (7.11) 78 +.048 (1.22) -.029 (0.74) 39 +.098 (2.49) -.322 (8.18) 79 -.048 (1.22) -.029 (0.74) 40 +.000 (0.00) -.347 (8.81) (Applicable to MIL-DTL-38999 only) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 21 -35 79 22D M ALL MS27531-35 FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 70 Contacts (Insert arrangement 21-75) NOTE: The SAE-AS39029/90 and 91 size 8 coaxial data bus contacts are not fully compatible with this insert arrangement and will require the use of a separate boot to seal properly and reduce the splaying of the contact. FIGURE 7. Insert arrangement, electrical connector, shell size 21 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. Location Contact position ID X axis Y axis A +.180 (4.57) +.180 (4.57) B +.180 (4.57) -.180 (4.57) C -.180 (4.57) -.180 (4.57) D -.180 (4.57) +.180 (4.57) Standard contact Shell size Arrangement No. Number of Size Service Contact contacts contacts rating location Pin Socket 21 -75 4 8 (see note) TWINAX All M39029/90-529 M39029/91-530MIL-STD-1560B 71 Contacts (Insert arrangement 23-1) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 -.428 (10.87) +.241 (6.12) 51 +.000 (0.00) -.047 (1.19) 2 -.467 (11.86) +.154 (3.91) 52 +.000 (0.00) -.142 (3.61) 3 -.488 (12.40) +.061 (1.55) 53 +.000 (0.00) -.237 (6.02) 4 -.415 (10.54) +.000 (0.00) 54 +.000 (0.00) -.332 (8.43) 5 -.488 (12.40) -.061 (1.55) 55 +.000 (0.00) -.427 (10.85) 6 -.428 (10.87) -.142 (3.61) 56 +.083 (2.11) +.475 (12.07) 7 -.428 (10.87) -.237 (6.02) 57 +.083 (2.11) +.380 (9.65) 8 -.332 (8.43) +.333 (8.46) 58 +.083 (2.11) +.285 (7.24) 9 -.332 (8.43) +.238 (6.05) 59 +.083 (2.11) +.190 (4.83) 10 -.332 (8.43) +.143 (3.63) 60 +.083 (2.11) +.095 (2.41) 11 -.332 (8.43) +.048 (1.22) 61 +.083 (2.11) +.000 (0.00) 12 -.332 (8.43) -.047 (1.19) 62 +.083 (2.11) -.095 (2.41) 13 -.332 (8.43) -.142 (3.61) 63 +.083 (2.11) -.190 (4.83) 14 -.332 (8.43) -.237 (6.02) 64 +.083 (2.11) -.285 (7.24) 15 -.332 (8.43) -.332 (8.43) 65 +.083 (2.11) -.380 (9.65) 16 -.249 (6.32) +.380 (9.65) 66 +.083 (2.11) -.475 (12.07) 17 -.249 (6.32) +.285 (7.24) 67 +.166 (4.22) +.428 (10.87) FIGURE 8. Insert arrangement, electrical connector, shell size 23 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600). MIL-STD-1560B 72 Contacts (Insert arrangement 23-1) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 18 -.249 (6.32) +.190 (4.83) 68 +.166 (4.22) +.333 (8.46) 19 -.249 (6.32) +.095 (2.41) 69 +.166 (4.22) +.238 (6.05) 20 -.249 (6.32) +.000 (0.00) 70 +.166 (4.22) +.143 (3.63) 21 -.249 (6.32) -.095 (2.41) 71 +.166 (4.22) +.048 (1.22) 22 -.249 (6.32) -.190 (4.83) 72 +.166 (4.22) -.047 (1.19) 23 -.249 (6.32) -.285 (7.24) 73 +.166 (4.22) -.142 (3.61) 24 -.249 (6.32) -.380 (9.65) 74 +.166 (4.22) -.237 (6.02) 25 -.166 (4.22) +.428 (10.87) 75 +.166 (4.22) -.332 (8.43) 26 -.166 (4.22) +.333 (8.46) 76 +.166 (4.22) -.427 (10.85) 27 -.166 (4.22) +.238 (6.05) 77 +.249 (6.32) +.380 (9.65) 28 -.166 (4.22) +.143 (3.63) 78 +.249 (6.32) +.285 (7.24) 29 -.166 (4.22) +.048 (1.22) 79 +.249 (6.32) +.190 (4.83) 30 -.166 (4.22) -.047 (1.19) 80 +.249 (6.32) +.095 (2.41) 31 -.166 (4.22) -.142 (3.61) 81 +.249 (6.32) +.000 (0.00) 32 -.166 (4.22) -.237 (6.02) 82 +.249 (6.32) -.095 (2.41) 33 -.166 (4.22) -.332 (8.43) 83 +.249 (6.32) -.190 (4.83) 34 -.166 (4.22) -.427 (10.85) 84 +.249 (6.32) -.285 (7.24) 35 -.083 (2.11) +.475 (12.07) 85 +.249 (6.32) -.380 (9.65) 36 -.083 (2.11) +.380 (9.65) 86 +.332 (8.43) +.333 (8.46) 37 -.083 (2.11) +.285 (7.24) 87 +.332 (8.43) +.238 (6.05) 38 -.083 (2.11) +.190 (4.83) 88 +.332 (8.43) +.143 (3.63) 39 -.083 (2.11) +.095 (2.41) 89 +.332 (8.43) +.048 (1.22) 40 -.083 (2.11) +.000 (0.00) 90 +.332 (8.43) -.047 (1.19) 41 -.083 (2.11) -.095 (2.41) 91 +.332 (8.43) -.142 (3.61) 42 -.083 (2.11) -.190 (4.83) 92 +.332 (8.43) -.237 (6.02) 43 -.083 (2.11) -.285 (7.24) 93 +.332 (8.43) -.332 (8.43) 44 -.083 (2.11) -.380 (9.65) 94 +.428 (10.87) +.241 (6.12) 45 -.083 (2.11) -.475 (12.07) 95 +.467 (11.86) +.154 (3.91) 46 +.000 (0.00) +.428 (10.87) 96 +.488 (12.40) +.061 (1.55) FIGURE 8. Insert arrangement, electrical connector, shell size 23 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 73 Contacts (Insert arrangement 23-1) Location Location Contact position ID Y-axis (mm) Contact position ID X-axis (mm) Y-axis X-axis (mm) (mm) 47 +.000 (0.00) +.333 (8.46) 97 +.415 (10.54) +.000 (0.00) 48 +.000 (0.00) +.238 (6.05) 98 +.488 (12.40) -.061 (1.55) 49 +.000 (0.00) +.143 (3.63) 99 +.428 (10.87) -.142 (3.61) 50 +.000 (0.00) +.048 (1.22) 100 +.428 (10.87) -.237 (6.02) (Inactive for new design for MIL-DTL-38999) Shell Arrangement no. Number of contacts Size Service Contact Supersedes size contacts rating location 23 -1 100 22M M All MS20056-1 FIGURE 8. Insert arrangement, electrical connector, shell size 23 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 74 Contacts (Insert arrangement 23-35) Location Location Contact position ID Y-axis (mm) Contact position ID X-axis (mm) Y-axis X-axis (mm) (mm) 1 -.428 (10.87) +.241 (6.12) 51 +.000 (0.00) -.047 (1.19) 2 -.467 (11.86) +.154 (3.91) 52 +.000 (0.00) -.142 (3.61) 3 -.488 (12.40) +.061 (1.55) 53 +.000 (0.00) -.237 (6.02) 4 -.415 (10.54) +.000 (0.00) 54 +.000 (0.00) -.332 (8.43) 5 -.488 (12.40) -.061 (1.55) 55 +.000 (0.00) -.427 (10.85) 6 -.428 (10.87) -.142 (3.61) 56 +.083 (2.11) +.475 (12.07) 7 -.428 (10.87) -.237 (6.02) 57 +.083 (2.11) +.380 (9.65) 8 -.332 (8.43) +.333 (8.46) 58 +.083 (2.11) +.285 (7.24) 9 -.332 (8.43) +.238 (6.05) 59 +.083 (2.11) +.190 (4.83) 10 -.332 (8.43) +.143 (3.63) 60 +.083 (2.11) +.095 (2.41) 11 -.332 (8.43) +.048 (1.22) 61 +.083 (2.11) +.000 (0.00) 12 -.332 (8.43) -.047 (1.19) 62 +.083 (2.11) -.095 (2.41) 13 -.332 (8.43) -.142 (3.61) 63 +.083 (2.11) -.190 (4.83) 14 -.332 (8.43) -.237 (6.02) 64 +.083 (2.11) -.285 (7.24) 15 -.332 (8.43) -.332 (8.43) 65 +.083 (2.11) -.380 (9.65) 16 -.249 (6.32) +.380 (9.65) 66 +.083 (2.11) -.475 (12.07) 17 -.249 (6.32) +.285 (7.24) 67 +.166 (4.22) +.428 (10.87) 18 -.249 (6.32) +.190 (4.83) 68 +.166 (4.22) +.333 (8.46) FIGURE 8. Insert arrangement, electrical connector, shell size 23 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 75 Contacts (Insert arrangement 23-35) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 19 -.249 (6.32) +.095 (2.41) 69 +.166 (4.22) +.238 (6.05) 20 -.249 (6.32) +.000 (0.00) 70 +.166 (4.22) +.143 (3.63) 21 -.249 (6.32) -.095 (2.41) 71 +.166 (4.22) +.048 (1.22) 22 -.249 (6.32) -.190 (4.83) 72 +.166 (4.22) -.047 (1.19) 23 -.249 (6.32) -.285 (7.24) 73 +.166 (4.22) -.142 (3.61) 24 -.249 (6.32) -.380 (9.65) 74 +.166 (4.22) -.237 (6.02) 25 -.166 (4.22) +.428 (10.87) 75 +.166 (4.22) -.332 (8.43) 26 -.166 (4.22) +.333 (8.46) 76 +.166 (4.22) -.427 (10.85) 27 -.166 (4.22) +.238 (6.05) 77 +.249 (6.32) +.380 (9.65) 28 -.166 (4.22) +.143 (3.63) 78 +.249 (6.32) +.285 (7.24) 29 -.166 (4.22) +.048 (1.22) 79 +.249 (6.32) +.190 (4.83) 30 -.166 (4.22) -.047 (1.19) 80 +.249 (6.32) +.095 (2.41) 31 -.166 (4.22) -.142 (3.61) 81 +.249 (6.32) +.000 (0.00) 32 -.166 (4.22) -.237 (6.02) 82 +.249 (6.32) -.095 (2.41) 33 -.166 (4.22) -.332 (8.43) 83 +.249 (6.32) -.190 (4.83) 34 -.166 (4.22) -.427 (10.85) 84 +.249 (6.32) -.285 (7.24) 35 -.083 (2.11) +.475 (12.07) 85 +.249 (6.32) -.380 (9.65) 36 -.083 (2.11) +.380 (9.65) 86 +.332 (8.43) +.333 (8.46) 37 -.083 (2.11) +.285 (7.24) 87 +.332 (8.43) +.238 (6.05) 38 -.083 (2.11) +.190 (4.83) 88 +.332 (8.43) +.143 (3.63) 39 -.083 (2.11) +.095 (2.41) 89 +.332 (8.43) +.048 (1.22) 40 -.083 (2.11) +.000 (0.00) 90 +.332 (8.43) -.047 (1.19) 41 -.083 (2.11) -.095 (2.41) 91 +.332 (8.43) -.142 (3.61) 42 -.083 (2.11) -.190 (4.83) 92 +.332 (8.43) -.237 (6.02) 43 -.083 (2.11) -.285 (7.24) 93 +.332 (8.43) -.332 (8.43) 44 -.083 (2.11) -.380 (9.65) 94 +.428 (10.87) +.241 (6.12) 45 -.083 (2.11) -.475 (12.07) 95 +.467 (11.86) +.154 (3.91) 46 +.000 (0.00) +.428 (10.87) 96 +.488 (12.40) +.061 (1.55) FIGURE 8. Insert arrangement, electrical connector, shell size 23 (Series I, III, IV of MIL-DTL- 38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 76 Contacts (Insert arrangement 23-35) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 47 +.000 (0.00) +.333 (8.46) 97 +.415 (10.54) +.000 (0.00) 48 +.000 (0.00) +.238 (6.05) 98 +.488 (12.40) -.061 (1.55) 49 +.000 (0.00) +.143 (3.63) 99 +.428 (10.87) -.142 (3.61) 50 +.000 (0.00) +.048 (1.22) 100 +.428 (10.87) -.237 (6.02) (Applicable to MIL-DTL-38999 only) Shell size Arrangement no. Number of contacts Size contacts Service rating Contact location Supersedes 23 -35 100 22D M All MS27532-35 FIGURE 8. Insert arrangement, electrical connector, shell size 23 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 77 Contacts (Insert arrangement 23-2) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 1 -.455 (11.56) +.159 (4.04) 44 +.000 (0.00) -.106 (2.69) 2 -.455 (11.56) +.053 (1.35) 45 +.000 (0.00) -.212 (5.38) 3 -.482 (12.24) -.053 (1.35) 46 +.000 (0.00) -.318 (8.08) 4 -.455 (11.56) -.159 (4.04) 47 +.000 (0.00) -.424 (10.77) 5 -.364 (9.25) +.318 (8.08) 48 +.091 (2.31) +.477 (12.12) 6 -.364 (9.25) +.212 (5.38) 49 +.091 (2.31) +.371 (9.42) 7 -.364 (9.25) +.106 (2.69) 50 +.091 (2.31) +.265 (6.73) 8 -.364 (9.25) +.000 (0.00) 51 +.091 (2.31) +.159 (4.04) 9 -.364 (9.25) -.106 (2.69) 52 +.091 (2.31) +.053 (1.35) 10 -.364 (9.25) -.212 (5.38) 53 +.091 (2.31) -.053 (1.35) 11 -.364 (9.25) -.318 (8.08) 54 +.091 (2.31) -.159 (4.04) 12 -.273 (6.93) +.371 (9.42) 55 +.091 (2.31) -.265 (6.73) 13 -.273 (6.93) +.265 (6.73) 56 +.091 (2.31) -.371 (9.42) 14 -.273 (6.93) +.159 (4.04) 57 +.091 (2.31) -.477 (12.12) 15 -.273 (6.93) +.053 (1.35) 58 +.182 (4.62) +.424 (10.77) 16 -.273 (6.93) -.053 (1.35) 59 +.182 (4.62) +.318 (8.08) 17 -.273 (6.93) -.159 (4.04) 60 +.182 (4.62) +.212 (5.38) FIGURE 8. Insert arrangement, electrical connector, shell size 23 (Series I, III, IV of MIL-DTL-38999, Series I of MIL-DTL-27599, and Series A of MIL-C-29600) – Continued. MIL-STD-1560B 78 Contacts (Insert arrangement 23-2) Location Location Contact position ID X-axis (mm) Y-axis (mm) Contact position ID X-axis (mm) Y-axis (mm) 18 -.273 (6.93) -.265 (6.73) 61 +.182 (4.62) +.106 (2.69) 19 -.287 (7.29) -.390 (9.91) 62 +.182 (4.62) +.000 (0.00) 20 -.182 (4.62) +.424 (10.77) 63 +.182 (4.62) -.106 (2.69) 21 -.182 (4.62) +.318 (8.08) 64 +.182 (4.62) -.212 (5.38) 22 -.182 (4.62) +.212 (5.38) 65 +.182 (4.62) -.318 (8.08) 23 -.182 (4.62) +.106 (2.69) 66 +.192 (4.88) -.446 (11.33) 24 -.182 (4.62) +.000 (0.00) 67 +.273 (6.93) +.371 (9.42) 25 -.182 (4.62) -.106 (2.69) 68 +.273 (6.93) +.265 (6.73) 26 -.182 (4.62) -.212 (5.38) 69 +.273 (6.93) +.159 (4.04) 27 -.182 (4.62) -.318 (8.08) 70 +.273 (6.93) +.053 (1.35) 28 -.192 (4.88) -.446 (11.33) 71 +.273 (6.93) -.053 (1.35) 29 -.091 (2.31) +.477 (12.12) 72 +.273 (6.93) -.159 (4.04) 30 -.091 (2.31) +.371 (9.42) 73 +.273 (6.93) -.265 (6.73) 31 -.091 (2.31) +.265