PN: 403 Ammonia Breakthrough Indicator For Carbon Absorbers Manual

AmmoniaBreakthrough IndicatorFor Carbon AbsorbersNH3 BTI 2(PN: 403)ManualAmmonia BTI 2 ManualChemteq, Inc., 600 West 24th Street, Suite B, Norfolk, Virginia 23517, Tel 757-622-2223, sales@chemteq.net©2009 Chemteq, Inc. MP-4038100-092614 A1. ApplicationThe Ammonia BTI 2 (PN: 403) is qualitative (yes/no) colorimetric indicator for the end-of-service lifeof carbon absorbers and filters. It is designed to provide real-time indication of the breakthrough ofammonia vapor.2. Specificationsa. Weight: 129.5g (4.6oz)b. Dimensions: 11.43cm (4.5in), diameter 5.08cm (2.0in)c. Inlet dimensions: 1.5" MNPTd. Operating temperature: -20oC to 65oC (-4oF to 149oF)e. Operating humidity: 5% RH to 90%RHf. Minimum detectable limit: 10ppm•hr at 30 cm/sec face velocityg. Color change: Light blue to purpleh. Storage temperature: 4oC to 25oC, (39oF to 77oF)i. Shelf life: 2 years at 4oC to 25oC, (39oF to 77oF)j. Service life: 18 monthsk. Light effect: NoneCross interferences: No interferences are known.3. Operating Instructionsa. Ensure that packaging pouch is intact.b. Open packaging pouch by tearing off the top part from one of side notches.c. Remove the Breakthrough Indicator from the packaging pouch.d. Remove the 1.5” threaded plug from the carbon absorber outlet lid.e. Remove the protective red plug to activate the breakthrough indicator.f. Thread the Breakthrough Indicator into the 1.5” threaded carbon absorber outlet lid.g. Replace carbon absorber when the Breakthrough Indicator changes color to purple.www.chemteq.netExposedChange carbon absorberUnexposed