Pneumatic Actuators

Local regulations may restrict the use of this product to below the conditions quoted.In the interests of development and improvement of the product, we reserve the right to change the specification. © Copyright 2003ISO 9001Cert. No. LRQ 0963008TI-P357-22CH Issue 3PN1000 and PN2000Pneumatic ActuatorsClosing Pressures for 1" to 4" 'C' Series Valves'C' series valveValve size 1" 1½" 2" 2½" 3" 4"DN25 DN40 DN50 DN65 DN80 DN100Standard travel in inches and (mm) ¾" (20) 13/16" (30) 1½" (38) 2" (50)Equal % Cv (US) and Kvs in brackets 18 (15) 36 (31) 60 (51) 99 (85) 136 (116) 223 (191)PTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphiteMaximum differential pressures (bar) -BALANCED valves controlled by positionerNote: For reduced trims use the equivalent trim diameter. See overleaf for Class V shut-off.PN1000 and PN2000 series actuatorsClass IV shut-off with:PTFE chevron or graphite stem and plug seal. For extended bonnets and bellows seal read 'PTFE' or 'graphite' depending on seal chosen.Spring Minimum air Maximum differential pressure (bar) for standard valve trimrange pressure bar g with either graphite or PTFE stem and plug sealSpring Spring Spring Spring PositionerActuator extend retract extend retract requiredPN1000 PN2000 PN1000 PN2000PN_300 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes 18 - - - - - - - - - - -PN_400 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes 57 29 26 - - - - - - - - -PN_500 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes 103 91 70 40 49 27 36 - 22 - - -PN_600 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes 103 103 103 98 92 70 77 53 56 33 41 -PN_700 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes - - - - - - 103 103 103 103 103 103PN_300 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes 103 97 74 50 53 31 - - - - - -PN_400 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes 103 103 103 103 103 88 95 70 71 47 - -PN_500 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes - - 103 103 103 103 103 103 103 103 103 98PN_600 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes - - - - - - - - 103 103 103 103PN_700 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes - - - - - - - - - - - -PN_300 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes 103 103 103 103 103 103 - - - - - -PN_400 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes - - - - 103 103 103 103 103 103 - -PN_500 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes - - - - - - - - - - 103 103PN_600 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes - - - - - - - - - - - -PN_700 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes - - - - - - - - - - - -Maximum differential pressures (bar) -UNBALANCED valves controlled by positionerPN1000 and PN2000 series actuatorsClass IV and VI shut-off with:PTFE chevron or graphite stem seal. For extended bonnets and bellows seal read 'PTFE' or 'graphite' depending on seal chosen.Spring Minimum air Maximum differential pressure (bar) for standard valve trimrange pressure bar g with either graphite or PTFE stem sealSpring Spring Spring Spring PositionerActuator extend retract extend retract requiredPN1000 PN2000 PN1000 PN2000PN_300 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes 5 3 - - - - - - - - - -PN_400 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes 13 11 5 4 3 2 - - - - - -PN_500 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes 25 23 10 10 6 6 3 3 - - - -PN_600 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes - - 17 16 11 10 6 6 4 4 - -PN_700 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes - - 35 34 23 22 14 14 9 9 5 5PN_300 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes 26 24 11 10 7 6 - - - - - -PN_400 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes 45 43 20 19 13 12 8 7 5 5 - -PN_500 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes 74 72 35 33 23 22 14 13 9 9 5 5PN_600 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes - - 51 50 33 33 20 20 14 14 8 8PN_700 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes - - 97 95 64 63 40 39 28 27 17 16PN_300 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes 60 58 27 25 17 16 - - - - - -PN_400 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes 98 95 46 45 30 29 18 18 13 12 - -PN_500 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes 103 103 74 73 49 48 30 30 21 21 13 12PN_600 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes - - 103 103 72 71 45 44 31 31 19 19PN_700 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes - - - - 103 103 83 82 58 58 35 35Maximum differential pressures (bar) -UNBALANCED valves controlled by positionerPTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePTFEGraphitePN1000 and PN2000 series actuatorsClass V shut-off with:PTFE chevron or graphite stem seal. For extended bonnets and bellows seal read 'PTFE' or 'graphite' depending on seal chosen.Spring Minimum air Maximum differential pressure (bar) for standard valve trimrange pressure bar g with either graphite or PTFE stem sealSpring Spring Spring Spring PositionerActuator extend retract extend retract requiredPN1000 PN2000 PN1000 PN2000PN_300 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes - - - - - - - - - - - -PN_400 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes - - - - - - - - - - - -PN_500 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes - - - - - - - - - - - -PN_600 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes - - - - - - - - - - - -PN_700 0.4 - 1.2 0.2 - 1.0 1.4 1.4 Yes - - 19 18 10 9 3 3 - - - -PN_300 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes 2 - - - - - - - - - - -PN_400 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes 21 18 4 2 - - - - - - - -PN_500 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes 50 48 18 17 9 8 3 2 - - - -PN_600 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes - - 34 33 20 19 10 9 5 5 - -PN_700 1.0 - 2.0 0.2 - 1.0 2.2 2.0 Yes - - 80 79 50 50 29 28 19 18 9 9PN_300 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes 36 33 11 10 - - - - - - - -PN_400 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes 73 71 29 28 16 16 - - - - - -PN_500 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes 103 103 57 56 35 34 19 19 12 11 - -PN_600 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes - - 91 90 58 57 34 33 22 22 12 11PN_700 2.0 - 4.0 0.2 - 1.0 4.2 3.0 Yes - - - - 103 103 72 71 49 48 28 28'C' series valveValve size 1" 1½" 2" 2½" 3" 4"DN25 DN40 DN50 DN65 DN80 DN100Standard travel in inches and (mm) ¾" (20) 13/16" (30) 1½" (38) 2" (50)Equal % Cv (US) and Kvs in brackets 18 (15) 36 (31) 60 (51) 99 (85) 136 (116) 223 (191)PN1000 and PN2000 Pneumatic Actuators Closing Pressuresfor 1" to 4" 'C' Series Valves TI-P357-22 CH Issue 3