Powerclad Filter Data

POWERCLAD ® Woven Mesh Sheets and Kni t ted Debr is Net t ing for Temporary Con ta inment and Weather Pro tec t i on Uniclass M3281:P71 EPIC CI/SfB Ln6 (B2d) (U47) Revision 4.4 Product Data www.powerclad.com Industrial Textiles & Plastics Ltd Stillington Road Easingwold York YO61 3FA United Kingdom Tel: +44 (0) 1347 825200 Fax: +44 (0) 1347 825222 E-mail: technical@itpltd.com Web: powerclad.com CERT NO.2318/00 Air permeability is desirable in many installations to contain debris & dust, dry out interior works, disperse paint solvents and disperse air pressure during stone cleaning or shot-blasting. Flame Retardant grades should always be used for works on occupied buildings or on safety critical installations such as shipyards and refineries. Powerclad Filter Sheeting is a closely woven mesh material providing good weather protection in exposed locations and harsh climates. Powerclad Vented Sheeting is a more open woven fabric to provide increased ventilation; it is ideal for printing corporate logos and fits Heras perimeter fencing. Powerclad Debris Netting is a lightweight knitted net. It provides the least weather protection and is primarily designed to improve site safety by reducing the risk of small tools and objects from falling outside the work area. Product Colours Weight Tensile Strength Fastening Strength Flame Retardant Temp. Range Air Permeability Aerodynamic coefficient Sizes Roll weight Pallet quantity EN 695 ISO 1421 BS 7955 PrEN12811 gsm N/50mm Newtons ° C Cf metres kg FLAME RETARDANT Powerclad FTFR Flame Retardant Filter Sheeting Blue 140 MD 1,000 XD 1,000 >630 BS 476 part 12-C (Complies with LPS 1215 Sec 3.1.1) -40 to +70 6 % 1.0 2.12 x 50 3.12 x 50 15 22 23 23 Powerclad VSFR Flame Retardant Vented Sheeting White 2x45m Black 1.76x50m 100 MD >630 XD >630 >500 BS 476 part 12-C (Complies with LPS 1215 Sec 3.1.1) -40 to +70 Windbreak 89% (ISO 9237) NT 2.0 x 45 1.76 x 50 9.5 9.3 39 39 Powerclad DNFR Flame Retardant Debris Netting White 80 MD ~400 XD ~245 Complies with LPS 1215 Sec 3.1.3 -40 to +70 1,068 cm3/cm2/sec 0.45 2.0 x 50 3.0 x 50 8 12 30 30 NON FR Powerclad FT Filter Sheeting Green 140 MD 1,000 XD 1,000 >630 NA -40 to +70 6 % 1.0 2.57 x 50 3.07 x 50 17 20 23 23 Powerclad VS Vented Sheeting White 100 MD >630 XD >630 >500 NA -40 to +70 Windbreak 89% (ISO 9237) NT 2.0 x 45 9.5 39 Powerclad DN Debris Netting Green, Blue Red, Yellow Orange, Black 70 MD ~400 XD ~245 NA -40 to +70 1,068 cm3/cm2/sec 0.45 2.0 x 50 3.0 x 50 7 10.5 30 27 Fastening Ties Toggle Tie BS 7955 Pass Break strength 500 N (28cm reach) Ratchet Ties 10 inch for debris netting Flexo Printing - Maximum print area 1017 x 800 mm Repeats at 1277mm Up to 6 colours Subject to minimum quantities Wide Format Printing – any size, no minimum quantity Other Product information Powerclad Scaffold Sheeting Powerclad Insulated & Acoustic Sheeting Powerclad Keder & Temporary Roof Sheeting POWERCLAD ® Woven Mesh Sheets and Kni t ted Debr is Net t ing for Temporary Con ta inment and Weather Pro tec t i on Uniclass M3281:P71 EPIC CI/SfB Ln6 (B2d) (U47) Revision 4.3 Product Data www.powerclad.com Products are offered subject to our Conditions of Sale, copies of which are available on request. Specifications and samples are merely illustrative and do not form part of any contract. Due to a policy of continued research and development, ITP reserves the right to alter specifications without notice. Test results are obtained under laboratory conditions on new material and not under actual usage conditions. Test results only relate to the sample tested. Powerbase? Powerclad? Powerlene? Powerlon? Powermex? Powerply? Powertie? Powertarp? Puraflex? ThermaPerm? are Trade Names of Industrial Textiles & Plastics Ltd. E&OE. ? Industrial Textiles & Plastics Ltd 2012 Industrial Textiles & Plastics Ltd Stillington Road Easingwold York YO61 3FA United Kingdom Tel: +44 (0) 1347 825200 Fax: +44 (0) 1347 825222 E-mail: technical@itpltd.com Web: powerclad.com CERT NO.2318/00 DISCLAIMER OF EXPRESS AND IMPLIED WARRANTIES Subject to the limitations, disclaimers and statements as set forth below, Industrial Textiles & Plastics Ltd represents to the Buyer that the product or products delivered to the Buyer conform(s) to the manufacturer's description and specifications attached to or delivered with the product. The representation that Industrial Textiles & Plastics Ltd makes to the Buyer that the product or products conform(s) to the manufacturer's description and specifications applies only under such circumstances when the Buyer utilises the product or products as specified and under normal use for which said product was intended. Any alleged nonconformity shall be made in writing to Industrial Textiles & Plastics Ltd. specifically stating and describing any such alleged nonconformity. The representation by Industrial Textiles & Plastics Ltd that the product or products delivered to the Buyer conform(s) to the manufacturer's description and specification as attached to or delivered with the product is expressly in lieu of all other representations, warranties, expressed or implied, and of all other obligations and liabilities, including consequential damages, on the part of Industrial Textiles & Plastics Ltd. Industrial Textiles & Plastics Ltd neither assumes nor authorises any person to assume for it any other liability in connection with the sale of the product. The representation of conformity by Industrial Textiles & Plastics Ltd as represented by Industrial Textiles & Plastics Ltd shall in addition to the above be null and void in the event that the product is misused or handled in a negligent manner by Buyer or any third party. Industrial Textiles & Plastics Ltd shall not be liable for damages or delays, if such occur, on account of defective material or workmanship or delays in shipment, nor will any allowances be granted for any repairs, alterations, work done or expense incurred in connection with any repairs, alterations or replacements except on specific written authority by Industrial Textiles & Plastics Ltd. Industrial Textiles & Plastics Ltd shall in no way be liable or responsible for injuries or damages to persons or property arising out of the use or operation of the product as herein contemplated, and Buyer hereby agrees to indemnify and save harmless Industrial Textiles & Plastics Ltd from all such liability and responsibility. Industrial Textiles & Plastics Ltd shall not be liable for any consequential damages for any reason including but not limited to those contemplated herein and whether such consequential damages may have been foreseeable, proximately caused or otherwise occurring. This disclaimer of Express or Implied Warranties constitutes a significant limitation on the rights and remedies otherwise available to the Buyer, which the Buyer freely and voluntarily acknowledges and accepts as part of the consideration for the contract to purchase the product or products from Industrial Textiles & Plastics Ltd. Due to a policy of continued research & development, Industrial Textiles & Plastics Ltd reserves the right to alter the details as described. Products are offered subject to our normal Conditions of Sale, which are available on request. The information in this document is of an illustrative nature and is supplied free of charge. It does not form part of any contract or any intended contract with the user. Final determination of the suitability of any information or material for the use contemplated and the manner of use is the sole responsibility of the user and the user must assume all risk and liability in connection therewith.