Pure Calcium Aluminate Concrete-Fondag Brochure

Material Safety Data Sheet Fondag® Reference MSDS-US-FDG-8/06Updated 8/24/2006 Reviewed 1/3/2012 1 Product and company identification • Product Name Fondag® • Trade Names Fondag® DG, Fondag® RS, Fondag® FS • Supplier Kerneos Inc. 1316 Priority Lane Chesapeake, VA 23324 Phone: 757-284-3200 Fax: 757-284-3300 2 Composition / Information on ingredients • Chemical Nature Substance obtained from the blending of a calcium aluminate clinker and calcium aluminate cement. The major elements appearing in the concrete are oxides based on Al, Ca, Si and Fe. The particles are polyphasic and as such the following mineralogical phases can be found depending on the grade of clinker. CaO•Al2O3 12042-68-1 CaO•2Al2O3 12004-88-5 12CaO•7Al2O3 12005-57-1 2CaO•Al2O3•SiO2 12068-46-1 4CaO•Al2O3•Fe2O3 12068-35-8 Al2O3 (a, ß) 1344-28-1 The generic CAS number for the polyphasic aluminate cement is: Calcium aluminate cement 65997-16-2 Calcium aluminate concrete does not contain free lime or crystalline silica (such as quartz, tridymite or cristobalite) in measurable amounts. • CAS number Fondag® DG, Fondag® RS, Fondag® FS 65997-16-2 100% 3 Hazards Identification • HMIS Rating (NPCA) Health 0 Flammability 0 Reactivity 0 Personal Protection 0 • NFPA Rating Health 0 Flammability 0 Reactivity 0 Special 0 Kerneos Inc. 1316 Priority Lane Chesapeake, VA 23324 Phone: (757) 284-3200 - FAX: (757) 284-3300 Page 1 (5) Material Safety Data Sheet Fondag® Reference MSDS-US-FDG-8/06• WHMIS Classification Class D, division 2B toxic material skin or eye irritant Class E, corrosive material forms alkaline solution with water • Most important hazards In contact with water, an alkaline solution will be formed (pH 11 – 11.5). In spite of the pH level, the alkaline reserve is limited and the product has not been classified as irritant according to the criteria defined in the EEC directives (93/21/EEC) A dust problem may occur in confined areas. It is regarded as nuisance dust without any known specific effects to health. • Specific hazards Calcium aluminates react chemically and harden when mixed with water. The reaction is exothermic resulting in a temperature rise. If large quantities of concrete are exposed to sufficient quantities of water, steam can be formed and the temperature may increase enough to cause a risk of burns during the reaction. • Carcinogen listed in: Calcium aluminate concrete is not a listed carcinogen with NTP, OSHA or IARC monograph. 4 First aid measures • Inhalation Remove person to fresh air. If symptoms persist, seek medical attention • Skin contact Remove contaminated clothing and wash affected area with soap and water. • Eye contact Flush eyes with plenty of clean water. If symptoms persist, seek medical attention. • Ingestion Do not induce vomiting. Wash mouth with water and give plenty of water to drink. 5 Fire-fighting measures Calcium aluminate concrete is not flammable and will not support a flame. It does not promote combustion with other materials. 6 Accidental release measures • Personal precautions See section 7 and 8 • Environmental precautions Avoid emission of dust • Methods of cleaning up Kerneos Inc. 1316 Priority Lane Chesapeake, VA 23324 Phone: (757) 284-3200 - FAX: (757) 284-3300 Page 2 (5) Material Safety Data Sheet Fondag® Reference MSDS-US-FDG-8/06For large amounts, preferable use dry methods while avoiding dust exposure. Do not empty material into drains, sewers or water basins as the material hardens in contact with water. 7 Handling and storage • Technical measures and precautions Use common procedures for handling and storage of industrial powder products with particular attention to suppression of dust and spillage, to avoid unnecessary exposure. Store in dry conditions, preferably above ground protected by shrink wrap or in bulk silo. • Safe handling advise No particular precautions. • Incompatible products Contact with water or water vapor during storage will hydrate the product which will cause lumps and affect the performance. • Packaging materials No special restrictions with respect to safety. 8 Exposure control / personal protection • Engineering measures Mechanical ventilation is recommended wherever feasible for evacuation of dust during handling operations (discharging, mixing, conveying, packing, etc.). • Control parameters The following occupational exposure limits defined for non specified nuisance dust are applicable. OSHA PEL ACGIH PEL Total dust 15 mg/m3 10 mg/m3 Respirable dust 5 mg/m3 5 mg/m3 • Personal protective equipment ANSI approved glasses or goggles should be worn whenever there is a risk of powder or wet mixture entering the eyes. Protective clothing is recommended, including waterproof gloves and boots. NIOSH approved respiratory protection should be worn when the conditions are such that the personal exposure is estimated to approach or exceed the stated limits. 9 Physical and chemical properties Physical State: Dry powder Color: dark brown Odor: none Specific gravity: 2.9 – 3.3 Vapor density: n/a Vapor pressure: n/a Evaporation rate: n/a Kerneos Inc. 1316 Priority Lane Chesapeake, VA 23324 Phone: (757) 284-3200 - FAX: (757) 284-3300 Page 3 (5) Material Safety Data Sheet Fondag® Reference MSDS-US-FDG-8/06Boiling point: n/a Freezing point: n/a pH: 11 – 11.5 when wet Water solubility: negligible 10 Stability and reactivity • Stability In a dry environment the product is chemically stable. When mixed with water it reacts chemically and hardens, forming stable calcium aluminate hydrates. The reaction is exothermic and continues for up to 24h. • Hazardous decomposition products None. 11 Toxicological information • Acute toxicity None. • Local effects May cause local irritation to eye, throat or skin, but in not classified as irritant according to EEC legislation • Sensitization and chronic toxicity Does not contain measurable amounts of soluble Chromium (VI) 12 Ecological information • Possible environmental effects After hydration (a few hours or days in moist conditions) the product is stable in soil and in water, with a negligible mobility of its constituents. 13 Disposal considerations Bags of unused material or empty contaminated packaging, as well as hardened residue may be disposed by landfill, if in accordance with local or national disposal regulations. The conditions or methods for handling, stocking, using or eliminating this product are beyond the control of Kerneos. Kerneos shall therefore not be held liable in case of loss, damage or any expense incurred related to the handling, the stocking, the use or the elimination of this product howsoever. 14 Transport information This product is not classified as a hazardous material under U.S. DOT or Canadian TDG regulations. Kerneos Inc. 1316 Priority Lane Chesapeake, VA 23324 Phone: (757) 284-3200 - FAX: (757) 284-3300 Page 4 (5) Material Safety Data Sheet Fondag® Kerneos Inc. 1316 Priority Lane Chesapeake, VA 23324 Phone: (757) 284-3200 - FAX: (757) 284-3300 Page 5 (5) Reference MSDS-US-FDG-8/0615 Regulatory information • CERCLA/Superfund This product is not listed as a CERCLA hazardous substance. • Inventory listings This substance is listed on: o U.S. TSCA inventory Section 8 (b) o Canadian Inventory, the DSL 16 Other information This MSDS follows: - OSHA CFR 1910.1200 on hazard communication - It has been prepared by the technical department of Kerneos Inc., Chesapeake, VA. - This version applies to Kerneos products distributed in North America. For users outside this area please consult your local office for a current MSDS. - An electronic version of this MSDS is available at: www.Kerneosinc.com under the products section - This document applies to this product only. When this product is mixed with other materials, the information contained in this document may not be applicable. Kerneos Inc., believes the information contained herein is accurate: however, Kerneos makes no guarantees with respect to such accuracy and assumes no liability in connection with the use of the information contained herein which is not intended to be and should not be construed as legal advice or as insuring compliance with any federal, state or local laws or regulations. Any party using this product should review all such laws, rules or regulations prior to use, including but not limited to US and Canada Federal, Provincial and State regulations. 1 Product and company identification 2 Composition / Information on ingredients 3 Hazards Identification 4 First aid measures 5 Fire-fighting measures 6 Accidental release measures 7 Handling and storage 8 Exposure control / personal protection 9 Physical and chemical properties 10 Stability and reactivity 11 Toxicological information 12 Ecological information 13 Disposal considerations 14 Transport information 15 Regulatory information 16 Other information