PVC Technical Document - Brochure

Revision: 08 / 2012Trade name: PVC-CAWDate of printing: 30.09.2012PVC-CAW08 / 2012Data sheet updatePVC-U, EDLP, 074-05-T28Moulding compound extrudedDIN EN ISO 1163, Teil 1Extruded to moulding compound standard1.370Density, g/cm³,ISO 118350Yield stress, MPa,DIN EN ISO 5274Elongation at yield, %,DIN EN ISO 5272500Tensile modulus of elasticity, MPa,DIN EN ISO 527Impact strength, KJ/m²,DIN EN ISO 1794Notched impact strength, kJ/m²,DIN EN ISO 179-Shore hardness D,ISO 8680,8 × 10-4Mean coefficient of linear thermal expansion, K-1,DIN 5375272Vicat BDIN 4102 B1 low flammability 1 to 4mm, general test certificate issued byFire behaviour DIN 4102an approved building inspectorate(Germany)UL 94 V-0 up from 1 mmFire behaviour UL 94 V0NF P 92-501 M1 from 1 to 3 mmFire behaviour NF P 92-501BS 476 class 1 for 3 mmFire behaviour BS 47639Dielectric strength, kV/mm,DIN IEC 60243-11013Surface resistivity, Ohm,DIN IEC 60093-20 to +60Temperature range, °CnoPhysiological safety in accordance with BfR(German Federal Institute for risk valuation)noPhysiological safety in accordance with EUnoPhysiological safety in accordance with FDAPage: 1 of 2Technical Data Sheet PVC-CAWPVC-CAWThe data presented in this section are to be seen as a guide and may vary depending on the processing method and testspecimen used. In general, the figures are averages of tests performed on extruded sheets with a thickness of 4 mm. Inthe case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20mm. Deviations may be possible if sheets are not available in these specific thicknesses. In the case of backed sheets,all technical specifications relate to the non-backed base sheets. Please note that this information is not necessarilyapplicable to products that have undergone downstream processing. The suitability of a material for a specific area ofapplication must be checked by the processor or end user. All technical specifications are provided only as a guide forplanning purposes. They do not constitute a guarantee of specific properties or qualities. For further information, pleasecontact our Technical Service Centre at tsc@simona.de.Page: 2 of 2Technical Data Sheet PVC-CAW