Quintox - Emissions Monitoring Solution 9206 Series- Brochure

www.kane.co.ukKane International LimitedKane House, Swallowfield, Welwyn Garden City, Hertfordshire, AL7 1JG, UKT: +44 (0) 1707 375550 F: +44 (0) 1707 393277 E: sales@kane.co.ukKANE9206 Quintox Flue Gas Analyser& Emissions MonitorInvest in your futureIndependently tested by TÜV SUD to:EN503791. The KANE9206 Quintox Standard KitKANE9206 Standard Kit Includes: Handset, Base Unit & Power SupplyMeasures 020-25%CO (H2 Compensated)0-10000ppmCO2 (calculated)0-20%Temperature0-1100°CPressure0-150 mbarEfficiency1-100%2. Select additional sensor optionsOptional Sensor Upgrades The Quintox can be fitted with any combination of up to five additional electro-chemical sensors plus one complete infra-red moduleElectro-Chemical SensorsNO (Hi Range)0-5000ppmKNO1H/QNO (Lo Range)0-100ppmKNO1L/QNO20-1000ppmKNO2/QSO2 (Hi Range)0-5000ppmKSO2H/QSO2 (Lo Range) 0-100ppmKSO2L/QH2S0-1000ppmKH2S/QInfra-Red ModuleKHC/QCO0-10%HC0-5000ppmCO20-20%Please note: if Infra-Red Module KHC/Q is fitted, the Hi/Lo CO Protection Solenoid & Pump KHPURQ is also required. See below for more details.3. Select a probeOptional Probes Depending on your requirement a selection of high quality stainless steel probes with integral thermocouples are availableHi-Temp = 1100°C/2140°F Standard Temp = 600°C/1112°FHi Temp Probe 1 metreremovable shaftKMCHLP6Hi Temp Probe 285mmremovable shaftKMCHP6Hi TempSmoke Probe 1 metre removable shaftKMCHSLP6Hi Temp Smoke Probe 285mmremovable shaftKMCHSP6Smoke Probe 285mmremovable shaftKMCSP6Professional Probe1 metre removable shaftKMCLP6Professional Probe285mm removable shaftKMCP6Hi/Lo CO ProtectionSolenoid & Pump KHPURQMust be used with Infra-Red Module KHC/QHi/Lo purge protection allows a standard ppm sensor to be fitted providing accurate readings at below 20ppm.When approaching over-range the solenoid operates & switches the gas flow to the electro-chemical sensor from flue gas to fresh air.The pump is then used to flush out the CO sensor & protect it from over-range. CO readings continue to be taken using the CO channel of the Infra-Red Module KHC/QPumped Water TrapWTS9206PThe pumped water trap empties itself on a regular basis & so protects the analyser from condensate overflow, this allows long term unattended monitoringHeater - Toxic SensorsKHSAEnables toxic sensors to operate effectively at below 0°C ambient temperature.The heater maintains temperature at +5°CThe KANE9206 Quintox is a modular system & the standard kit provides the platform to build a complete solution to suit your specific monitoring application. All the options available are listed below ensuring that you are provided with exactly what you need.Key features include:y Large Graphical Display - Up to 15 lines of text/data can be displayedy Wireless link from the handset to the base unit- Offering cable free connectiony GPS Location- Pinpoint exact test locationy Wireless & USB Connection to PC- Use the KANE LIVE software to monitor readings in “real time”y Large internal memory- Can store up to 64,000 testsy Main Purge- Allows sensor zeroing without the need to withdraw the probe from the flue- Refreshes the sensors during long term monitoring- Automatically protects the sensors from being over-ranged.y Active Flow Control- Compensates for sample pressure fluctuation & filter blocking by adjusting the pump speed to maintain a set sample gas flow ratey Built in Printer with additional output to optional portable IR Printer- IR printer ideal when working away from the base unitIndependently tested by TÜV SUD to EN50379 the new KANE9206 Quintox is a cost effective & versatile emissions monitoring solution.Customised to your specific requirement the KANE9206 Quintox uses electro-chemical sensors to monitor Carbon Monoxide, Nitrogen Dioxide, Nitric Oxide, Sulphur Dioxide, Hydrogen Sulphide, and Oxygen. Combine up to five electro-chemical sensors with our infra-red measurement technology to monitor Carbon Monoxide (up to 10%), Carbon Dioxide & Hydrocarbons.KANE9206 Quintox Flue Gas Analyser & Emissions MonitorWireless connectivity4. Optional upgradesUsed in conjunction with the heated probe & heated line, the sample conditioning unit comprises:a peltier fan cooled chiller assembly, a peristaltic pump to automatically remove condensate, the control electronics & power supply moduleSample Conditioning UnitKMDM110/230Heated ProbeKMHP1200Heated LineKMHL3000KMCLP6Follow us:01707 384810 ® The KANE logo is a registered trademark of Kane International Ltd. All other marks are trademarks of their respective holders. Wireless connectivityTransfer live analyser readings to your PC or AndroidTM Phone using the “KANE LIVE” software or “Printer App for AndroidTM ” downloaded FREE from the KANE web site www.kane.co.ukMain Measurement Screen:Top line: Shows status messages Gases: O2 & CO2 are shown in %Other gases shown in ppm or other user selected unitsCO can be shown in % if optional IR bench fittedTemperature: Displayed in °C or °F. N\\F = not fittedAtmospheric Pressure (ATM): Is always displayed in mbarWhen a calculation cannot be made due to an out of range value ———— will be displayedPrinted Reports:Produce comprehensive printed reports via integral printer, optional IR printer, or send full report directly to an AndroidTM Phone THE KANE9206 QUINTOX IS A MODULAR SYSTEM & PRICING IS ON APPLICATION FOR MORE DETAILS PLEASE CALL US NOW