Raymac Environmental Services
- Home
- Companies & Suppliers
- Raymac Environmental Services
- Downloads
- Rain Drains Brochuure
Rain Drains Brochuure
EnvironmentalBambi BucketFireflexRemote SiteEmergency ResponseDragonSEI INDUSTRIES LTD. 7400 Wilson Avenue Delta, BC, Canada, V4G 1E5 Tel: (604) 946-3131 Fax: (604) 940-9566 seisales@sei-ind.com www.sei-ind.comPrinted in CanadaEnsure your berm has enough capacity to protect you in the event of a spill. The RainDrain uses gravity to filter hydrocarbons out of rainwater, allowing operators to safely drain rainwater from their berms. The RainDrain is a go-no-go filter and will automatically shut off when it is full. Featuring rugged construction and an easy-to-use filter cartridge replacement, the RainDrain is an essential addition for all your berms.RaindRain™SECONDARY CONTAINMENT BERM FILTRATION SYSTEMdESiGn FEaTURESGo-no-go hydrocarbon filter element filters rainwater below 10ppm hydrocarbon content. This allows for unmonitored draining of rainwater as the filter will automatically stop discharge flow when filled with hydrocarbons. Meets EPA Regulation 40CFR112.7.Tough enough to be used in all climates and locations, the filter casing is constructed of rugged anodized aluminum and includes molded rubber caps.Quick clip bands around the filter casing allow the filter to be easily changed in just minutes.The ball valve and sight glass allow an operator to observe when the filter element is full of hydrocarbons thereby indicating a change needed in the filter media.Eight foot chemical hose allows the filter to be installed away from the berm and in a lower position ensuring easier gravity drainage.Camlock connectors on the filter element, sightglass and chemical hose allow for quick and easy installation.••••••COMPOnEnTS Anodized aluminum filter housing with rubber molded caps, quick clip bands and a camlock inlet¾” (1.9 cm) ball valve sight glass assembly with camlocks ¾” (1.9 cm) bulkhead fitting to install the RainDrain on any berm (optional)•••05-05RAINDRAIN SPECIFICATIONSPart Number Capacity Flow Rate Dimensions WeightIBMKF0618 0.5 USG (1.9L) 0.32 USG/min (1.2 L/min)6” dia. x 18” L (15cm x 45cm)13 lbs. (5.90 kg)IBMKF0636 2 USG (7.6L) 0.32 USG/min (1.2 L/min)6” dia. x 36” L (15cm x 91cm)26 lbs. (11.76 kg)RainDrain model 0.5 USG (1.9 L)RainDrain model 2 USG (7.6 L)RainDrain setup on a Ride-Side Berm
Most popular related searches
